Florida Packages

  • Sale!
    Florida Approved Provider: 0006346
    Four Civil Engineering courses plus Florida Laws & Rules, Florida Ethics and Advanced Florida Building Code Course that will earn 19 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Raymond Bosek, PE

    Florida Laws & Rules for Professional Engineers: 1 CEH

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    Florida Ethics for Professional Engineers: 1 CEH

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    2023 Florida Advanced Building Code: Building – Significant Changes: 1 CEH

    • Florida Building Commission Approved Course #1222
    • This course satisfies retention of the “Special Qualifications” designation on your licensure record, pursuant to Section 471.0195, Florida Statutes.

    This one (1) hour course covers and highlights some of the significant changes and updates in the 2023 8th Edition Florida Building Code: Building (FBC-B) which was recently updated from the 2020 FBC 7th Edition Florida Building Code: Building.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Gravel Road Construction: 4 PDH

    It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.

    Lessons Learned-Design and Construction of Buildings: 3 PDH

    In this course the student will review lessons learned from post building occupancy evaluations to understand common building design and/or construction flaws and review essential tips to correct, avoid and/or mitigate these occurrences.

    Residential Structural Design: 5 PDH

    In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.

    Florida-Civil Engineering Package #2 w/AFBC: 19 PDH

    $90.00 Add to cart
    Florida Approved Provider: 0006346
    Four Civil Engineering courses plus Florida Laws & Rules, Florida Ethics and Advanced Florida Building Code Course that will earn 19 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Raymond Bosek, PE

    Florida Laws & Rules for Professional Engineers: 1 CEH

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    Florida Ethics for Professional Engineers: 1 CEH

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    2023 Florida Advanced Building Code: Building – Significant Changes: 1 CEH

    • Florida Building Commission Approved Course #1222
    • This course satisfies retention of the “Special Qualifications” designation on your licensure record, pursuant to Section 471.0195, Florida Statutes.

    This one (1) hour course covers and highlights some of the significant changes and updates in the 2023 8th Edition Florida Building Code: Building (FBC-B) which was recently updated from the 2020 FBC 7th Edition Florida Building Code: Building.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Gravel Road Construction: 4 PDH

    It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.

    Lessons Learned-Design and Construction of Buildings: 3 PDH

    In this course the student will review lessons learned from post building occupancy evaluations to understand common building design and/or construction flaws and review essential tips to correct, avoid and/or mitigate these occurrences.

    Residential Structural Design: 5 PDH

    In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.

  • Sale! Civil Engineering Courses
    Florida Approved Provider: 0006346
    Four Civil Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Raymond Bosek, PE

    Florida Laws & Rules for Professional Engineers: 1 CEH

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    Florida Ethics for Professional Engineers: 1 CEH

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Gravel Road Construction: 4 PDH

    It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.

    Lessons Learned-Design and Construction of Buildings: 3 PDH

    In this course the student will review lessons learned from post building occupancy evaluations to understand common building design and/or construction flaws and review essential tips to correct, avoid and/or mitigate these occurrences.

    Residential Structural Design: 5 PDH

    In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.

    Florida-Civil Engineering Package #2: 18 PDH

    $80.00 Add to cart
    Florida Approved Provider: 0006346
    Four Civil Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Raymond Bosek, PE

    Florida Laws & Rules for Professional Engineers: 1 CEH

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    Florida Ethics for Professional Engineers: 1 CEH

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Gravel Road Construction: 4 PDH

    It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.

    Lessons Learned-Design and Construction of Buildings: 3 PDH

    In this course the student will review lessons learned from post building occupancy evaluations to understand common building design and/or construction flaws and review essential tips to correct, avoid and/or mitigate these occurrences.

    Residential Structural Design: 5 PDH

    In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.

  • Sale! Civil Engineering Courses
    Florida Approved Provider: 0006346
    Four Civil Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Raymond Bosek, PE

    Florida Laws & Rules for Professional Engineers: 1 CEH

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    Florida Ethics for Professional Engineers: 1 CEH

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    Stress and Strain in Soils: 4 PDH

    In this course the student will understand the properties and mechanics of soils and accurately calculate the stresses and deformations of soil masses.

    Engineering Description of Soils and Rocks: 4 PDH

    In this course the student will understand the engineering characteristics of soils and rocks and to how to properly identify and classify to develop a subsurface profile for site evaluations.

    Slope Stability in Embankments and Structures: 5 PDH

    In this course the student will understand the design of slope stability in embankments and structures and how to recognize, analyze, and solve slope instability issues encountered.

    Strategies for Improving Sustainability of Asphalt Pavements: 3 PDH

    In this course the student will understand sustainability throughout the entire pavement life cycle and the importance of recognizing context sensitivity and assessing trade-offs in developing sustainable solutions.

    Florida-Civil Engineering Package: 18 PDH

    $80.00 Add to cart
    Florida Approved Provider: 0006346
    Four Civil Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Raymond Bosek, PE

    Florida Laws & Rules for Professional Engineers: 1 CEH

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    Florida Ethics for Professional Engineers: 1 CEH

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    Stress and Strain in Soils: 4 PDH

    In this course the student will understand the properties and mechanics of soils and accurately calculate the stresses and deformations of soil masses.

    Engineering Description of Soils and Rocks: 4 PDH

    In this course the student will understand the engineering characteristics of soils and rocks and to how to properly identify and classify to develop a subsurface profile for site evaluations.

    Slope Stability in Embankments and Structures: 5 PDH

    In this course the student will understand the design of slope stability in embankments and structures and how to recognize, analyze, and solve slope instability issues encountered.

    Strategies for Improving Sustainability of Asphalt Pavements: 3 PDH

    In this course the student will understand sustainability throughout the entire pavement life cycle and the importance of recognizing context sensitivity and assessing trade-offs in developing sustainable solutions.

  • Sale!
    Florida Approved Provider: 0006346
    Four Electrical Engineering courses plus Florida Laws & Rules, Florida Ethics and Advanced Florida Building Code Course that will earn 19 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Juan Pesante, PE

    Florida Laws & Rules for Professional Engineers: 1 CEH

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    Florida Ethics for Professional Engineers: 1 CEH

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    2023 Florida Advanced Building Code: Building – Significant Changes: 1 CEH

    • Florida Building Commission Approved Course #1222
    • This course satisfies retention of the “Special Qualifications” designation on your licensure record, pursuant to Section 471.0195, Florida Statutes.

    This one (1) hour course covers and highlights some of the significant changes and updates in the 2023 8th Edition Florida Building Code: Building (FBC-B) which was recently updated from the 2020 FBC 7th Edition Florida Building Code: Building.

    2023 NEC Significant Code Changes Part 1: 4 PDH

    Part 1 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    2023 NEC Significant Code Changes Part 2: 4 PDH

    Part 2 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    Blockchain Technology Overview: 3 PDH

    In this course the student will be introduced to Blockchain technology, from its history and beginnings, through the various components, models, and make-up and finally its applications and limitations.

    Electrical Safety: 5 PDH

    In this course the student will understand the dangers and hazards when working with or near electrical power and approaches to work safely to avoid serious injury.

    Florida-Electrical Engineering Package #2 w/AFBC: 19 PDH

    $90.00 Add to cart
    Florida Approved Provider: 0006346
    Four Electrical Engineering courses plus Florida Laws & Rules, Florida Ethics and Advanced Florida Building Code Course that will earn 19 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Juan Pesante, PE

    Florida Laws & Rules for Professional Engineers: 1 CEH

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    Florida Ethics for Professional Engineers: 1 CEH

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    2023 Florida Advanced Building Code: Building – Significant Changes: 1 CEH

    • Florida Building Commission Approved Course #1222
    • This course satisfies retention of the “Special Qualifications” designation on your licensure record, pursuant to Section 471.0195, Florida Statutes.

    This one (1) hour course covers and highlights some of the significant changes and updates in the 2023 8th Edition Florida Building Code: Building (FBC-B) which was recently updated from the 2020 FBC 7th Edition Florida Building Code: Building.

    2023 NEC Significant Code Changes Part 1: 4 PDH

    Part 1 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    2023 NEC Significant Code Changes Part 2: 4 PDH

    Part 2 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    Blockchain Technology Overview: 3 PDH

    In this course the student will be introduced to Blockchain technology, from its history and beginnings, through the various components, models, and make-up and finally its applications and limitations.

    Electrical Safety: 5 PDH

    In this course the student will understand the dangers and hazards when working with or near electrical power and approaches to work safely to avoid serious injury.

  • Sale! Electrical Engineering Courses
    Florida Approved Provider: 0006346
    Four Electrical Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Juan Pesante, PE

    Florida Laws & Rules for Professional Engineers: 1 CEH

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    Florida Ethics for Professional Engineers: 1 CEH

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    2023 NEC Significant Code Changes Part 1: 4 PDH

    Part 1 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    2023 NEC Significant Code Changes Part 2: 4 PDH

    Part 2 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    Blockchain Technology Overview: 3 PDH

    In this course the student will be introduced to Blockchain technology, from its history and beginnings, through the various components, models, and make-up and finally its applications and limitations.

    Electrical Safety: 5 PDH

    In this course the student will understand the dangers and hazards when working with or near electrical power and approaches to work safely to avoid serious injury.

    Florida-Electrical Engineering Package #2: 18 PDH

    $80.00 Add to cart
    Florida Approved Provider: 0006346
    Four Electrical Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Juan Pesante, PE

    Florida Laws & Rules for Professional Engineers: 1 CEH

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    Florida Ethics for Professional Engineers: 1 CEH

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    2023 NEC Significant Code Changes Part 1: 4 PDH

    Part 1 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    2023 NEC Significant Code Changes Part 2: 4 PDH

    Part 2 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    Blockchain Technology Overview: 3 PDH

    In this course the student will be introduced to Blockchain technology, from its history and beginnings, through the various components, models, and make-up and finally its applications and limitations.

    Electrical Safety: 5 PDH

    In this course the student will understand the dangers and hazards when working with or near electrical power and approaches to work safely to avoid serious injury.

  • Sale! Electrical Engineering Courses
    Florida Approved Provider: 0006346
    Four Electrical Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Juan Pesante, PE

    Florida Laws & Rules for Professional Engineers: 1 CEH

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    Florida Ethics for Professional Engineers: 1 CEH

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH

    In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.

    Energy Storage Technology Cost and Performance: 4 PDH

    In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).

    Electrical Storage Guide for Electrical Engineers: 5 PDH

    This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.

    Analysis of National Charging infrastructure for Electric Vehicles: 3 PDH

    This courses addresses the fundamental question of how much plug-in electric vehicle (PEV) charging infrastructure is needed in the United States to support both plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs). In this course the student will understand PEV charging infrastructure requirements and analyze a range of plausible scenarios that consider the relationship between the evolution of the PEV fleet and charging infrastructure.

    Florida-Electrical Engineering Package: 18 PDH

    $80.00 Add to cart
    Florida Approved Provider: 0006346
    Four Electrical Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Juan Pesante, PE

    Florida Laws & Rules for Professional Engineers: 1 CEH

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    Florida Ethics for Professional Engineers: 1 CEH

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH

    In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.

    Energy Storage Technology Cost and Performance: 4 PDH

    In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).

    Electrical Storage Guide for Electrical Engineers: 5 PDH

    This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.

    Analysis of National Charging infrastructure for Electric Vehicles: 3 PDH

    This courses addresses the fundamental question of how much plug-in electric vehicle (PEV) charging infrastructure is needed in the United States to support both plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs). In this course the student will understand PEV charging infrastructure requirements and analyze a range of plausible scenarios that consider the relationship between the evolution of the PEV fleet and charging infrastructure.

  • Sale!
    Florida Approved Provider: 0006346
    Four Mechanical Engineering courses plus Florida Laws & Rules, Florida Ethics and Advanced Florida Building Code Course that will earn 19 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Seth Grablow, PE

    Florida Laws & Rules for Professional Engineers: 1 CEH

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    Florida Ethics for Professional Engineers: 1 CEH

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    2023 Florida Advanced Building Code: Building – Significant Changes: 1 CEH

    • Florida Building Commission Approved Course #1222
    • This course satisfies retention of the “Special Qualifications” designation on your licensure record, pursuant to Section 471.0195, Florida Statutes.

    This one (1) hour course covers and highlights some of the significant changes and updates in the 2023 8th Edition Florida Building Code: Building (FBC-B) which was recently updated from the 2020 FBC 7th Edition Florida Building Code: Building.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Fire Protection Systems: 3 PDH

    In this course the student will understand fire protection systems and fire protection system operations and will be able to familiarize themselves with the various systems and components including operations and maintenance/ inspection procedures.

    Improving Motor and Drive System Performance: 5 PDH

    This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.

    Principles of Hydraulic and Pneumatic Systems: 4 PDH

    In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.

    Florida-Mechanical Engineering Package #2 w/AFBC: 19 PDH

    $90.00 Add to cart
    Florida Approved Provider: 0006346
    Four Mechanical Engineering courses plus Florida Laws & Rules, Florida Ethics and Advanced Florida Building Code Course that will earn 19 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Seth Grablow, PE

    Florida Laws & Rules for Professional Engineers: 1 CEH

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    Florida Ethics for Professional Engineers: 1 CEH

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    2023 Florida Advanced Building Code: Building – Significant Changes: 1 CEH

    • Florida Building Commission Approved Course #1222
    • This course satisfies retention of the “Special Qualifications” designation on your licensure record, pursuant to Section 471.0195, Florida Statutes.

    This one (1) hour course covers and highlights some of the significant changes and updates in the 2023 8th Edition Florida Building Code: Building (FBC-B) which was recently updated from the 2020 FBC 7th Edition Florida Building Code: Building.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Fire Protection Systems: 3 PDH

    In this course the student will understand fire protection systems and fire protection system operations and will be able to familiarize themselves with the various systems and components including operations and maintenance/ inspection procedures.

    Improving Motor and Drive System Performance: 5 PDH

    This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.

    Principles of Hydraulic and Pneumatic Systems: 4 PDH

    In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.

  • Sale! Mechanical Engineering Courses
    Florida Approved Provider: 0006346
    Four Mechanical Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Seth Grablow, PE

    Florida Laws & Rules for Professional Engineers: 1 CEH

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    Florida Ethics for Professional Engineers: 1 CEH

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Fire Protection Systems: 3 PDH

    In this course the student will understand fire protection systems and fire protection system operations and will be able to familiarize themselves with the various systems and components including operations and maintenance/ inspection procedures.

    Improving Motor and Drive System Performance: 5 PDH

    This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.

    Principles of Hydraulic and Pneumatic Systems: 4 PDH

    In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.

    Florida-Mechanical Engineering Package #2: 18 PDH

    $80.00 Add to cart
    Florida Approved Provider: 0006346
    Four Mechanical Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Seth Grablow, PE

    Florida Laws & Rules for Professional Engineers: 1 CEH

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    Florida Ethics for Professional Engineers: 1 CEH

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Fire Protection Systems: 3 PDH

    In this course the student will understand fire protection systems and fire protection system operations and will be able to familiarize themselves with the various systems and components including operations and maintenance/ inspection procedures.

    Improving Motor and Drive System Performance: 5 PDH

    This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.

    Principles of Hydraulic and Pneumatic Systems: 4 PDH

    In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.

  • Sale! Mechanical Engineering Courses
    Florida Approved Provider: 0006346
    Four Mechanical Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 CEH guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Seth Grablow, PE

    Florida Laws & Rules for Professional Engineers: 1 CEH

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    Florida Ethics for Professional Engineers: 1 CEH

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    Improving Pumping System Performance: 4 PDH

    This course provides a thorough overview of pumping systems and their components and practical guidelines to enhance performance and increase efficiency.

    Improving Steam System Performance: 5 PDH

    This course provides a thorough overview of steam systems and their components and practical guidelines to enhance performance and increase efficiency.

    Improving Compressed Air System Performance: 4 PDH

    This course provides a thorough overview of compressed air systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.

    Coating Types and Characteristics of Metals: 3 PDH

    In this course the student will understand the characteristics and applications of various industrial coatings and metal finishes.

    Florida-Mechanical Engineering Package: 18 PDH

    $80.00 Add to cart
    Florida Approved Provider: 0006346
    Four Mechanical Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 CEH guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Seth Grablow, PE

    Florida Laws & Rules for Professional Engineers: 1 CEH

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    Florida Ethics for Professional Engineers: 1 CEH

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    Improving Pumping System Performance: 4 PDH

    This course provides a thorough overview of pumping systems and their components and practical guidelines to enhance performance and increase efficiency.

    Improving Steam System Performance: 5 PDH

    This course provides a thorough overview of steam systems and their components and practical guidelines to enhance performance and increase efficiency.

    Improving Compressed Air System Performance: 4 PDH

    This course provides a thorough overview of compressed air systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.

    Coating Types and Characteristics of Metals: 3 PDH

    In this course the student will understand the characteristics and applications of various industrial coatings and metal finishes.

  • Sale!
    Florida Approved Provider: 0006346
    Five Chemical Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 PDH guaranteed to be accepted by the Florida Board of Professional EngineersInstructor: Raymond Bosek, PE
    Package contains all required hours for 2023 renewal

    • Florida Laws & Rules (Course #0010038)
    • Florida Ethics (Course #0010038)
    • Remaining hours in Area of Practice

    Florida Laws & Rules for Professional Engineers: 1 CEH

    Preview Course: Florida Laws and Rules

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Florida's laws and rules
    • Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium
    • Florida Statutes: Changes to Chapter 455
    • Florida Statutes: Changes to Chapter 471
    • Disciplinary Cases Review

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

    Florida Ethics for Professional Engineers: 1 CEH

    Preview Course: Florida Ethics

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 continuing education hours (CEH).

    Process Design for Conversion of Biomass to Biofuels: 4 PDH

    Florida Approved Area of Practice Course

    In this course you the student will understand the motivation, process, design, and cost of converting biomass into biofuel. The focus of this course is to find a plausible pathway to convert algal carbohydrates and lipids to fuel and to minimize cost during production.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Why the motivation to exploit this energy supply
      • Process design and cost estimation
      • Economics and processing cost factors
      • Analysis of processing research on case study
      • Future research and opportunities

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 4 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Engineer’s Guide to Cross Connection Control: 4 PDH

    Florida Approved Area of Practice Course

    In this online course a student will understand cross connection risks, review real case studies of cross connection mishaps, and understand the various methods and procedures to mitigate cross connection hazards.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the reasons for performing a study
    • Understand the health hazards of cross-connections
    • Discuss various real-life mishaps
    • Discuss cross-connections risk mitigation
    • Explain programs for cross-connection control and backflow prevention
    • Understand common cross-connection scenarios and methods to mitigate

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Carbon Absorption of Volatile Organic Compounds: 3 PDH

    Florida Approved Area of Practice Course

    Carbon adsorption is used in air pollution control to remove volatile organic compounds (VOCs) from low to medium concentration gas streams, when stringent outlet concentration must be met and/or recovery of the VOC is desired. This course covers the types of adsorbers, adsorption theory, and design procedures for carbon adsorption equipment.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • The types of carbon adsorption equipment and which are in most common use
      • Define an adsorption isotherm and be able to recognize the equation for the Freundlich isotherm
      • Adsorber sizing parameters
      • Make adsorption and desorption time calculations
      • Procedures for estimating carbon requirements
      • Cost estimation procedures for carbon adsorption systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Corrosion Protection for Metal Fasteners in Coastal Areas: 3 PDH

    Florida Approved Area of Practice Course

    In this online course a student will understand material design and selection of metal fasteners and connectors on structures in coastal areas for increased corrosion-resistance.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the importance of using corrosion-resistant metal connectors and fasteners in coastal areas
    • Discuss regulations and codes in corrosion resistance material selection for fasteners
    • Explain the causes of corrosion in coastal areas
    • Understand types of corrosion-resistant metal connectors and fasteners
    • Explain best practices for corrosion resistance

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Hazardous Waste Identification: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This course covers hazardous waste regulated by the EPA under the Resource Conservation and Recovery Act (RCRA), starting with determining whether what waste is considered a solid waste according to the RCRA regulations and moving on to determining if it fits one of the RCRA requirements for being a hazardous waste.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Fundamentals of the hazardous waste identification process
      • Definition of hazardous waste & solid waste as used by RCRA
      • How to identify listed hazardous wastes and their characteristics
      • Interpretation of the mixture and ‘derived-from’ rules
      • Interpretation of the contained-in policy

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 16 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Florida-Chemical Engineering Package: 18 CEH

    $80.00 Add to cart
    Florida Approved Provider: 0006346
    Five Chemical Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 PDH guaranteed to be accepted by the Florida Board of Professional EngineersInstructor: Raymond Bosek, PE
    Package contains all required hours for 2023 renewal

    • Florida Laws & Rules (Course #0010038)
    • Florida Ethics (Course #0010038)
    • Remaining hours in Area of Practice

    Florida Laws & Rules for Professional Engineers: 1 CEH

    Preview Course: Florida Laws and Rules

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Florida's laws and rules
    • Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium
    • Florida Statutes: Changes to Chapter 455
    • Florida Statutes: Changes to Chapter 471
    • Disciplinary Cases Review

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

    Florida Ethics for Professional Engineers: 1 CEH

    Preview Course: Florida Ethics

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 continuing education hours (CEH).

    Process Design for Conversion of Biomass to Biofuels: 4 PDH

    Florida Approved Area of Practice Course

    In this course you the student will understand the motivation, process, design, and cost of converting biomass into biofuel. The focus of this course is to find a plausible pathway to convert algal carbohydrates and lipids to fuel and to minimize cost during production.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Why the motivation to exploit this energy supply
      • Process design and cost estimation
      • Economics and processing cost factors
      • Analysis of processing research on case study
      • Future research and opportunities

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 4 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Engineer’s Guide to Cross Connection Control: 4 PDH

    Florida Approved Area of Practice Course

    In this online course a student will understand cross connection risks, review real case studies of cross connection mishaps, and understand the various methods and procedures to mitigate cross connection hazards.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the reasons for performing a study
    • Understand the health hazards of cross-connections
    • Discuss various real-life mishaps
    • Discuss cross-connections risk mitigation
    • Explain programs for cross-connection control and backflow prevention
    • Understand common cross-connection scenarios and methods to mitigate

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Carbon Absorption of Volatile Organic Compounds: 3 PDH

    Florida Approved Area of Practice Course

    Carbon adsorption is used in air pollution control to remove volatile organic compounds (VOCs) from low to medium concentration gas streams, when stringent outlet concentration must be met and/or recovery of the VOC is desired. This course covers the types of adsorbers, adsorption theory, and design procedures for carbon adsorption equipment.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • The types of carbon adsorption equipment and which are in most common use
      • Define an adsorption isotherm and be able to recognize the equation for the Freundlich isotherm
      • Adsorber sizing parameters
      • Make adsorption and desorption time calculations
      • Procedures for estimating carbon requirements
      • Cost estimation procedures for carbon adsorption systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Corrosion Protection for Metal Fasteners in Coastal Areas: 3 PDH

    Florida Approved Area of Practice Course

    In this online course a student will understand material design and selection of metal fasteners and connectors on structures in coastal areas for increased corrosion-resistance.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the importance of using corrosion-resistant metal connectors and fasteners in coastal areas
    • Discuss regulations and codes in corrosion resistance material selection for fasteners
    • Explain the causes of corrosion in coastal areas
    • Understand types of corrosion-resistant metal connectors and fasteners
    • Explain best practices for corrosion resistance

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Hazardous Waste Identification: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This course covers hazardous waste regulated by the EPA under the Resource Conservation and Recovery Act (RCRA), starting with determining whether what waste is considered a solid waste according to the RCRA regulations and moving on to determining if it fits one of the RCRA requirements for being a hazardous waste.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Fundamentals of the hazardous waste identification process
      • Definition of hazardous waste & solid waste as used by RCRA
      • How to identify listed hazardous wastes and their characteristics
      • Interpretation of the mixture and ‘derived-from’ rules
      • Interpretation of the contained-in policy

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 16 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

  • Sale! Environmental engineering
    Florida Approved Provider: 0006346
    Seven Environmental Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 PDH guaranteed to be accepted by the Florida Board of Professional EngineersInstructor: Raymond Bosek, PE
    Package contains all required hours for 2023 renewal

    • Florida Laws & Rules (Course #0010038)
    • Florida Ethics (Course #0010038)
    • Remaining hours in Area of Practice

    Florida Laws & Rules for Professional Engineers: 1 CEH

    Preview Course: Florida Laws and Rules

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Florida's laws and rules
    • Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium
    • Florida Statutes: Changes to Chapter 455
    • Florida Statutes: Changes to Chapter 471
    • Disciplinary Cases Review

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

    Florida Ethics for Professional Engineers: 1 CEH

    Preview Course: Florida Ethics

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 continuing education hours (CEH).

    Building Envelope Impact on HVAC Energy Use: 3 PDH

    Florida Approved Area of Practice Course #0009701

    How airtight are the buildings you are responsible for? What is the energy load and indoor air quality like in your buildings? The only way to know is to perform a study. Despite common assumptions, measurements have shown that typical U.S. commercial buildings are not particularly airtight.

    In this course we present a recent simulation study on the impact of improving envelope airtightness in U.S. commercial buildings. You get documented, verifiable facts, report charts and graphs illustrating the findings, and a discussion from the report on the results of the study, Investigation of the Impact of Commercial Building Envelope Airtightness on HVAC Energy Use.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the reasons for performing a study
    • Understand the method of analysis regarding building envelope tightness
    • Describe the buildings used for the study
    • Understand which climates allow for the most HVAC savings
    • Explain the results of the study

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

    Carbon Absorption of Volatile Organic Compounds: 3 PDH

    Florida Approved Area of Practice Course #0009701

    Carbon adsorption is used in air pollution control to remove volatile organic compounds (VOCs) from low to medium concentration gas streams, when stringent outlet concentration must be met and/or recovery of the VOC is desired. This course covers the types of adsorbers, adsorption theory, and design procedures for carbon adsorption equipment.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • The types of carbon adsorption equipment and which are in most common use
      • Define an adsorption isotherm and be able to recognize the equation for the Freundlich isotherm
      • Adsorber sizing parameters
      • Make adsorption and desorption time calculations
      • Procedures for estimating carbon requirements
      • Cost estimation procedures for carbon adsorption systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Hurricane Mitigation: Summary Report On Building Performance: 3 PDH

    Florida Approved Area of Practice Course #0009701

    After major hurricane disasters, the Federal Emergency Management Agency (FEMA) dispatches Building Performance Assessment Teams (BPATs) to evaluate the successes and failures of buildings to withstand the wind and flood forces of these storms. The teams document the results of their evaluations in building performance assessment reports. This 3-hour online course summarizes the BPAT reports for Hurricane Katerina.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Describe the building and foundation types typically used in coastal areas
    • Illustrate the ability of various building and foundation types to withstand coastal surge, riverine flood, and hurricane winds
    • Explain design and construction practices that can reduce building damage in hurricanes
    • Describe construction practices that can reduce building damage in hurricanes

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Energy Performance of LEED for New Construction Buildings: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This focuses on the measured energy performance for 121 LEED New Construction buildings, and compares the data to a variety of benchmarks, including Commercial Building Energy Consumption Survey (CBECS) averages, Energy Star ratings and modeled energy performance estimates provided with LEED submittals.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Recognize how energy performance of the sample set of buildings was evaluated
      • Understand energy savings of LEED certified buildings
      • Discern the accuracy of energy models
      • Discern the accuracy of building specific energy models
      • Interpret the strength and weeknesses of using LEED

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Ponds- Planning, Design, Construction: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This course provides guidance on some of the required criteria the United States Department of Agriculture (USDA) has in place for the planning, design, construction and maintenance of ponds. This course describes basic design principles of embankment and excavation ponds as well as construction requirements. Topics include: water needs, preliminary soil investigations, watershed & stormwater runoff estimation, basin sealing, spillways and inlets, and operation & maintenance. This online PDH course is intended for hydrologists, civil engineers, agricultural engineers, construction engineers, municipal engineers, geotechnical engineers and environmental engineers.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Become familiar with the general features and the differences of embankment and excavated ponds
      • How to perform a preliminary investigation
      • Be able estimate storm water runoff quantity and rate using the runoff curve number method
      • Estimate time of concentration for a watershed for a given flow length and average watershed slope
      • Advantages and disadvantages of a hooded or canopy inlet spillway and a drop inlet spillway
      • Estimate earthfill requirements for an embankment for known end areas and embankment length
      • Estimate embankment end area for known embankment height, side slopes, and top width

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 16 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Hazardous Waste Identification: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This course covers hazardous waste regulated by the EPA under the Resource Conservation and Recovery Act (RCRA), starting with determining whether what waste is considered a solid waste according to the RCRA regulations and moving on to determining if it fits one of the RCRA requirements for being a hazardous waste.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Fundamentals of the hazardous waste identification process
      • Definition of hazardous waste & solid waste as used by RCRA
      • How to identify listed hazardous wastes and their characteristics
      • Interpretation of the mixture and ‘derived-from’ rules
      • Interpretation of the contained-in policy

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 16 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Wastewater Treatment Plants: 1 PDH

    Florida Approved Area of Practice Course #0009700

    Package plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • General configuration of extended aeration, sequencing batch reactor, and oxidation ditch package plants
      • Typical applications for extended aeration, sequencing batch reactor, and oxidation ditch package plants
      • Advantages and disadvantages of extended aeration, sequencing batch reactor, and oxidation ditch package plants
      • Design criteria for extended aeration, sequencing batch reactor, and oxidation ditch package plants
      • Typical performance and costs of extended aeration, sequencing batch reactor, and oxidation ditch package plants

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one professional development hours (PDH) of continuing education.

    Florida-Environmental Engineering Package: 18 CEH

    $80.00 Add to cart
    Florida Approved Provider: 0006346
    Seven Environmental Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 PDH guaranteed to be accepted by the Florida Board of Professional EngineersInstructor: Raymond Bosek, PE
    Package contains all required hours for 2023 renewal

    • Florida Laws & Rules (Course #0010038)
    • Florida Ethics (Course #0010038)
    • Remaining hours in Area of Practice

    Florida Laws & Rules for Professional Engineers: 1 CEH

    Preview Course: Florida Laws and Rules

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Florida's laws and rules
    • Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium
    • Florida Statutes: Changes to Chapter 455
    • Florida Statutes: Changes to Chapter 471
    • Disciplinary Cases Review

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

    Florida Ethics for Professional Engineers: 1 CEH

    Preview Course: Florida Ethics

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 continuing education hours (CEH).

    Building Envelope Impact on HVAC Energy Use: 3 PDH

    Florida Approved Area of Practice Course #0009701

    How airtight are the buildings you are responsible for? What is the energy load and indoor air quality like in your buildings? The only way to know is to perform a study. Despite common assumptions, measurements have shown that typical U.S. commercial buildings are not particularly airtight.

    In this course we present a recent simulation study on the impact of improving envelope airtightness in U.S. commercial buildings. You get documented, verifiable facts, report charts and graphs illustrating the findings, and a discussion from the report on the results of the study, Investigation of the Impact of Commercial Building Envelope Airtightness on HVAC Energy Use.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the reasons for performing a study
    • Understand the method of analysis regarding building envelope tightness
    • Describe the buildings used for the study
    • Understand which climates allow for the most HVAC savings
    • Explain the results of the study

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

    Carbon Absorption of Volatile Organic Compounds: 3 PDH

    Florida Approved Area of Practice Course #0009701

    Carbon adsorption is used in air pollution control to remove volatile organic compounds (VOCs) from low to medium concentration gas streams, when stringent outlet concentration must be met and/or recovery of the VOC is desired. This course covers the types of adsorbers, adsorption theory, and design procedures for carbon adsorption equipment.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • The types of carbon adsorption equipment and which are in most common use
      • Define an adsorption isotherm and be able to recognize the equation for the Freundlich isotherm
      • Adsorber sizing parameters
      • Make adsorption and desorption time calculations
      • Procedures for estimating carbon requirements
      • Cost estimation procedures for carbon adsorption systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Hurricane Mitigation: Summary Report On Building Performance: 3 PDH

    Florida Approved Area of Practice Course #0009701

    After major hurricane disasters, the Federal Emergency Management Agency (FEMA) dispatches Building Performance Assessment Teams (BPATs) to evaluate the successes and failures of buildings to withstand the wind and flood forces of these storms. The teams document the results of their evaluations in building performance assessment reports. This 3-hour online course summarizes the BPAT reports for Hurricane Katerina.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Describe the building and foundation types typically used in coastal areas
    • Illustrate the ability of various building and foundation types to withstand coastal surge, riverine flood, and hurricane winds
    • Explain design and construction practices that can reduce building damage in hurricanes
    • Describe construction practices that can reduce building damage in hurricanes

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Energy Performance of LEED for New Construction Buildings: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This focuses on the measured energy performance for 121 LEED New Construction buildings, and compares the data to a variety of benchmarks, including Commercial Building Energy Consumption Survey (CBECS) averages, Energy Star ratings and modeled energy performance estimates provided with LEED submittals.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Recognize how energy performance of the sample set of buildings was evaluated
      • Understand energy savings of LEED certified buildings
      • Discern the accuracy of energy models
      • Discern the accuracy of building specific energy models
      • Interpret the strength and weeknesses of using LEED

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Ponds- Planning, Design, Construction: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This course provides guidance on some of the required criteria the United States Department of Agriculture (USDA) has in place for the planning, design, construction and maintenance of ponds. This course describes basic design principles of embankment and excavation ponds as well as construction requirements. Topics include: water needs, preliminary soil investigations, watershed & stormwater runoff estimation, basin sealing, spillways and inlets, and operation & maintenance. This online PDH course is intended for hydrologists, civil engineers, agricultural engineers, construction engineers, municipal engineers, geotechnical engineers and environmental engineers.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Become familiar with the general features and the differences of embankment and excavated ponds
      • How to perform a preliminary investigation
      • Be able estimate storm water runoff quantity and rate using the runoff curve number method
      • Estimate time of concentration for a watershed for a given flow length and average watershed slope
      • Advantages and disadvantages of a hooded or canopy inlet spillway and a drop inlet spillway
      • Estimate earthfill requirements for an embankment for known end areas and embankment length
      • Estimate embankment end area for known embankment height, side slopes, and top width

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 16 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Hazardous Waste Identification: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This course covers hazardous waste regulated by the EPA under the Resource Conservation and Recovery Act (RCRA), starting with determining whether what waste is considered a solid waste according to the RCRA regulations and moving on to determining if it fits one of the RCRA requirements for being a hazardous waste.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Fundamentals of the hazardous waste identification process
      • Definition of hazardous waste & solid waste as used by RCRA
      • How to identify listed hazardous wastes and their characteristics
      • Interpretation of the mixture and ‘derived-from’ rules
      • Interpretation of the contained-in policy

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 16 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Wastewater Treatment Plants: 1 PDH

    Florida Approved Area of Practice Course #0009700

    Package plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • General configuration of extended aeration, sequencing batch reactor, and oxidation ditch package plants
      • Typical applications for extended aeration, sequencing batch reactor, and oxidation ditch package plants
      • Advantages and disadvantages of extended aeration, sequencing batch reactor, and oxidation ditch package plants
      • Design criteria for extended aeration, sequencing batch reactor, and oxidation ditch package plants
      • Typical performance and costs of extended aeration, sequencing batch reactor, and oxidation ditch package plants

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one professional development hours (PDH) of continuing education.

  • Sale!
    Florida Approved Provider: 0006346
    Six Structural Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 CEH guaranteed to be accepted by the Florida Board of Professional EngineersInstructor: Raymond Bosek, PE
    Package contains all required hours for 2023 renewal

    • Florida Laws & Rules (Course #0010038)
    • Florida Ethics (Course #0010038)
    • Remaining hours in Area of Practice

    Florida Laws & Rules for Professional Engineers: 1 CEH

    Preview Course: Florida Laws and Rules

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Florida's laws and rules
    • Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium
    • Florida Statutes: Changes to Chapter 455
    • Florida Statutes: Changes to Chapter 471
    • Disciplinary Cases Review

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

    Florida Ethics for Professional Engineers: 1 CEH

    Preview Course: Florida Ethics

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2023 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 continuing education hours (CEH).

    Cost Benefit of ICF: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This online course is based on a guide that provides cost comparisons of ICF construction to standard residential wood-frame construction, a comprehensive cost analysis of the monthly costs of home ownership for wood-frame and ICF homes, and a detailed discussion regarding many of the structural and energy performance benefits gained through the use of ICFs.

    The student must take a multiple-choice quiz consisting of ten (10) questions at the end of this course to earn PDH credits.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Become familiar with ICF construction
      • Be made aware of the many benefits gained through the use of ICF construction
      • Comparative performance and cost comparison of ICF home vs wood frame home
      • Structral safety and hazard mitigation
      • Energy cost comparison of ICF home

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Design of Commercial Buildings to Mitigate Terrorist Attacks: 4 PDH

    Florida Approved Area of Practice Course #0009695

    This course provides guidance to engineers in methods to mitigate the effects of hazards resulting from terrorist attacks on new buildings. While focusing primarily on explosive attacks and design strategies to mitigate the effects of explosions, the course also addresses design strategies to mitigate the effects of chemical, biological and radiological attacks. In addition to the applicability to the design of new commercial office, retail, multi-family residential, and light-industrial buildings, many of the concepts presented are also applicable to other building types and/or existing buildings.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Design strategies to enhance life safety of building occupants
    • Incremental steps to produce fully developed security measures
    • Multi-disciplinary approach to security design
    • Complex trade-offs required when designing security into a building

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Design of Heavy Duty Concrete Floor Slabs on Grade: 3 PDH

    Florida Approved Area of Practice Course #0009701

    This course describes the criteria for the design of concrete floor slabs on grade in buildings for heavy loads. Concrete floor slabs on grade are often subjected to heavy loads in buildings such as wall loads, stationary live loads and moving loads. The entire design procedure is based on a working stress concept. This course will provide the student with the criteria needed to design concrete floor slabs on grade subjected to heavy loads. Design examples are shown to aid in understanding the course material.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The steps required to design a heavy duty concrete floor slab
    • How to determine floor slab requirements for wall loads, stationary wall loads and moving loads
    • How to investigate the subgrade and environmental conditions relevant to the design
    • How to determine the modulus of subgrade reaction for various soils

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Hurricane Mitigation: Summary Report On Building Performance: 3 PDH

    Florida Approved Area of Practice Course #0009701

    After major hurricane disasters, the Federal Emergency Management Agency (FEMA) dispatches Building Performance Assessment Teams (BPATs) to evaluate the successes and failures of buildings to withstand the wind and flood forces of these storms. The teams document the results of their evaluations in building performance assessment reports. This 3-hour online course summarizes the BPAT reports for Hurricane Katrina.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Describe the building and foundation types typically used in coastal areas
      • Illustrate the ability of various building and foundation types to withstand coastal surge, riverine flood, and hurricane winds
      • Explain design and construction practices that can reduce building damage in hurricanes
      • Describe construction practices that can reduce building damage in hurricanes

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Deterioration of Concrete: 2 PDH

    Florida Approved Area of Practice Course #0009701

    A basic understanding of the underlying causes of concrete deficiencies is essential to performing meaningful evaluations which lead to the proper selection of the method or technique used to successfully repair concrete. Symptoms or observations of a deficiency must be differentiated from the actual cause of the deficiency, and it is imperative that causes and not symptoms be addressed in repairs. Deterioration of concrete is an extremely complex subject since, in most cases, the damage detected will be the result of more than one mechanism.

    In this course, the student will review Chapter 3, Causes of Distress and Deterioration of Concrete from Engineer Manual (EM) 1110-2-2002, “Engineering and Design – Evaluation and Repair of Concrete Structures” published by the U.S. Army Corp of Engineers (issued 30 June 1995). This course is most relevant to engineers wishing to attain knowledge on the most common causes of problems in concrete. The course also provides a brief description of the basic mechanism of each common problem, a description of the typical symptoms that would be observed during a visual inspection, and suggests preventative methods or techniques to prevent further damage.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Common causes of concrete deterioration
    • Symptoms of concrete distress and deterioration that can be found during visual inspections
    • Preventative measures to reduce or eliminate further concrete degradation.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Structural Design Criteria For Structures Other Than Buildings: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This two hour online course establishes structural design criteria for structures other than buildings, furnishes design guidance for various types of structures, and identifies special considerations with regard to certain materials in specific applications. Structures other than buildings which are covered in this course include the following: bridges; dock and harbor facilities; drainage structures; bulk material structures; water and wastewater structures; and mechanical, electrical, and communication structures. The course materials are based entirely on the Technical Manual TM 5-809-6/AFM 88-3 of Joint Departments of the Army and Air Force USA: Structural Design Criteria for Structures Other Than Buildings.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Know the common building materials used in construction
    • Types of structures used in transportation, water & electrical distribution
    • Support requirements for mechanical systems and bulk materials
    • Design criteria for various types of structures
    • Identify special considerations with regard to certain materials in specific applications.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Florida-Structural Engineering Package: 18 CEH

    $80.00 Add to cart
    Florida Approved Provider: 0006346
    Six Structural Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 CEH guaranteed to be accepted by the Florida Board of Professional EngineersInstructor: Raymond Bosek, PE
    Package contains all required hours for 2023 renewal

    • Florida Laws & Rules (Course #0010038)
    • Florida Ethics (Course #0010038)
    • Remaining hours in Area of Practice

    Florida Laws & Rules for Professional Engineers: 1 CEH

    Preview Course: Florida Laws and Rules

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Florida's laws and rules
    • Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium
    • Florida Statutes: Changes to Chapter 455
    • Florida Statutes: Changes to Chapter 471
    • Disciplinary Cases Review

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

    Florida Ethics for Professional Engineers: 1 CEH

    Preview Course: Florida Ethics

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2023 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 continuing education hours (CEH).

    Cost Benefit of ICF: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This online course is based on a guide that provides cost comparisons of ICF construction to standard residential wood-frame construction, a comprehensive cost analysis of the monthly costs of home ownership for wood-frame and ICF homes, and a detailed discussion regarding many of the structural and energy performance benefits gained through the use of ICFs.

    The student must take a multiple-choice quiz consisting of ten (10) questions at the end of this course to earn PDH credits.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Become familiar with ICF construction
      • Be made aware of the many benefits gained through the use of ICF construction
      • Comparative performance and cost comparison of ICF home vs wood frame home
      • Structral safety and hazard mitigation
      • Energy cost comparison of ICF home

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Design of Commercial Buildings to Mitigate Terrorist Attacks: 4 PDH

    Florida Approved Area of Practice Course #0009695

    This course provides guidance to engineers in methods to mitigate the effects of hazards resulting from terrorist attacks on new buildings. While focusing primarily on explosive attacks and design strategies to mitigate the effects of explosions, the course also addresses design strategies to mitigate the effects of chemical, biological and radiological attacks. In addition to the applicability to the design of new commercial office, retail, multi-family residential, and light-industrial buildings, many of the concepts presented are also applicable to other building types and/or existing buildings.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Design strategies to enhance life safety of building occupants
    • Incremental steps to produce fully developed security measures
    • Multi-disciplinary approach to security design
    • Complex trade-offs required when designing security into a building

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Design of Heavy Duty Concrete Floor Slabs on Grade: 3 PDH

    Florida Approved Area of Practice Course #0009701

    This course describes the criteria for the design of concrete floor slabs on grade in buildings for heavy loads. Concrete floor slabs on grade are often subjected to heavy loads in buildings such as wall loads, stationary live loads and moving loads. The entire design procedure is based on a working stress concept. This course will provide the student with the criteria needed to design concrete floor slabs on grade subjected to heavy loads. Design examples are shown to aid in understanding the course material.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The steps required to design a heavy duty concrete floor slab
    • How to determine floor slab requirements for wall loads, stationary wall loads and moving loads
    • How to investigate the subgrade and environmental conditions relevant to the design
    • How to determine the modulus of subgrade reaction for various soils

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Hurricane Mitigation: Summary Report On Building Performance: 3 PDH

    Florida Approved Area of Practice Course #0009701

    After major hurricane disasters, the Federal Emergency Management Agency (FEMA) dispatches Building Performance Assessment Teams (BPATs) to evaluate the successes and failures of buildings to withstand the wind and flood forces of these storms. The teams document the results of their evaluations in building performance assessment reports. This 3-hour online course summarizes the BPAT reports for Hurricane Katrina.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Describe the building and foundation types typically used in coastal areas
      • Illustrate the ability of various building and foundation types to withstand coastal surge, riverine flood, and hurricane winds
      • Explain design and construction practices that can reduce building damage in hurricanes
      • Describe construction practices that can reduce building damage in hurricanes

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Deterioration of Concrete: 2 PDH

    Florida Approved Area of Practice Course #0009701

    A basic understanding of the underlying causes of concrete deficiencies is essential to performing meaningful evaluations which lead to the proper selection of the method or technique used to successfully repair concrete. Symptoms or observations of a deficiency must be differentiated from the actual cause of the deficiency, and it is imperative that causes and not symptoms be addressed in repairs. Deterioration of concrete is an extremely complex subject since, in most cases, the damage detected will be the result of more than one mechanism.

    In this course, the student will review Chapter 3, Causes of Distress and Deterioration of Concrete from Engineer Manual (EM) 1110-2-2002, “Engineering and Design – Evaluation and Repair of Concrete Structures” published by the U.S. Army Corp of Engineers (issued 30 June 1995). This course is most relevant to engineers wishing to attain knowledge on the most common causes of problems in concrete. The course also provides a brief description of the basic mechanism of each common problem, a description of the typical symptoms that would be observed during a visual inspection, and suggests preventative methods or techniques to prevent further damage.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Common causes of concrete deterioration
    • Symptoms of concrete distress and deterioration that can be found during visual inspections
    • Preventative measures to reduce or eliminate further concrete degradation.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Structural Design Criteria For Structures Other Than Buildings: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This two hour online course establishes structural design criteria for structures other than buildings, furnishes design guidance for various types of structures, and identifies special considerations with regard to certain materials in specific applications. Structures other than buildings which are covered in this course include the following: bridges; dock and harbor facilities; drainage structures; bulk material structures; water and wastewater structures; and mechanical, electrical, and communication structures. The course materials are based entirely on the Technical Manual TM 5-809-6/AFM 88-3 of Joint Departments of the Army and Air Force USA: Structural Design Criteria for Structures Other Than Buildings.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Know the common building materials used in construction
    • Types of structures used in transportation, water & electrical distribution
    • Support requirements for mechanical systems and bulk materials
    • Design criteria for various types of structures
    • Identify special considerations with regard to certain materials in specific applications.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

  • Sale!
    Florida Approved Provider #CE99
    Six Land Surveying courses courses that will earn 24 PDH guaranteed to be accepted by the Florida Board of Professional Surveyors and MappersInstructor: Raymond Bosek, PE

    Land Surveyor’s Ethics: 2 PDH

    Florida Approved Course #9620

    In this ethics course the student will understand the standards of professional behavior for adherence to the highest ethical conduct and revisit the emphasis that the holder of a professional license has a direct and vital impact on the safety, health, and welfare of the public.

    Public Land Survey: Rectangular System: 8 PDH

    Florida Approved Course #9627

    In this course the student will review the rectangular surveying system which has been used continuously in the United States since 1785. As all facets of this system occasionally come into use, the student will become well versed in the field procedures of conducting an original survey covering both historical and current methods.

    Aerial Photogrammetry: 5 PDH

    Florida Approved Course #9621

    In this course the student will understand procedural guidance, technical specifications, and quality control (QC) criteria for performing aerial photogrammetric mapping activities.

    Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors : 4 PDH

    Florida Approved Course #9626

    This course is an introduction of using sUAS in land surveying. From FAA licensing requirements to common sUAS products and software, with an understanding of these basics a land surveyor can easily get started in using this up and coming technology.

    Airborne Topographic LiDAR: 3 PDH

    Florida Approved Course #9622

    In this course the student will review the principles of Airborne Topographic LiDAR and learn how to utilize methods to employ this technology in the field.

    Corner Restoration Fundamentals: 2 PDH

    Florida Approved Course #9624

    In this course the student will understand the understand federal guidelines of resurveying corner monuments and the procedures and laws to successfully reestablish these boundaries.

    Florida-Land Surveyors’s Package: 24 PDH

    $80.00 Add to cart
    Florida Approved Provider #CE99
    Six Land Surveying courses courses that will earn 24 PDH guaranteed to be accepted by the Florida Board of Professional Surveyors and MappersInstructor: Raymond Bosek, PE

    Land Surveyor’s Ethics: 2 PDH

    Florida Approved Course #9620

    In this ethics course the student will understand the standards of professional behavior for adherence to the highest ethical conduct and revisit the emphasis that the holder of a professional license has a direct and vital impact on the safety, health, and welfare of the public.

    Public Land Survey: Rectangular System: 8 PDH

    Florida Approved Course #9627

    In this course the student will review the rectangular surveying system which has been used continuously in the United States since 1785. As all facets of this system occasionally come into use, the student will become well versed in the field procedures of conducting an original survey covering both historical and current methods.

    Aerial Photogrammetry: 5 PDH

    Florida Approved Course #9621

    In this course the student will understand procedural guidance, technical specifications, and quality control (QC) criteria for performing aerial photogrammetric mapping activities.

    Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors : 4 PDH

    Florida Approved Course #9626

    This course is an introduction of using sUAS in land surveying. From FAA licensing requirements to common sUAS products and software, with an understanding of these basics a land surveyor can easily get started in using this up and coming technology.

    Airborne Topographic LiDAR: 3 PDH

    Florida Approved Course #9622

    In this course the student will review the principles of Airborne Topographic LiDAR and learn how to utilize methods to employ this technology in the field.

    Corner Restoration Fundamentals: 2 PDH

    Florida Approved Course #9624

    In this course the student will understand the understand federal guidelines of resurveying corner monuments and the procedures and laws to successfully reestablish these boundaries.
  • Sale!
    Florida Approved Provider #CE99
    Seven Land Surveying courses courses that will earn 24 PDH guaranteed to be accepted by the Florida Board of Professional Surveyors and MappersInstructor: Raymond Bosek, PE

    Land Surveyor’s Ethics: 2 PDH

    Florida Approved Course #9620

    In this ethics course the student will understand the standards of professional behavior for adherence to the highest ethical conduct and revisit the emphasis that the holder of a professional license has a direct and vital impact on the safety, health, and welfare of the public.

    Public Land Survey: Rectangular System: 8 PDH

    Florida Approved Course #9627

    In this course the student will review the rectangular surveying system which has been used continuously in the United States since 1785. As all facets of this system occasionally come into use, the student will become well versed in the field procedures of conducting an original survey covering both historical and current methods.

    Satellite Photogrammetry: 2 PDH

    Florida Approved Course #9628

    In this course the student will learn about satellite photogrammetry and its common applications. The student will review geo-positioning from satellite images and procedures for creating stereo pairs from satellite imagery as well as reviewing the top things to consider in buying optical satellite imagery.

    Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors : 4 PDH

    Florida Approved Course #9626

    This course is an introduction of using sUAS in land surveying. From FAA licensing requirements to common sUAS products and software, with an understanding of these basics a land surveyor can easily get started in using this up and coming technology.

    Description of Lands: 3 PDH

    Florida Approved Course #9625

    In this course the student will review the principles of Airborne Topographic LiDAR and learn how to utilize methods to employ this technology in the field.

    Corner Restoration Fundamentals: 2 PDH

    Florida Approved Course #9624

    In this course the student will understand the understand federal guidelines of resurveying corner monuments and the procedures and laws to successfully reestablish these boundaries.

    Construction Surveying Curves: 3 PDH

    Florida Approved Course #9623

    In this course the student will learns to locate points using angles and distances for establishing curves. An essential tool in construction surveying when determining the line of a curve for road layout or some other type of curved construction.

    Florida-Land Surveyors’s Package #2: 24 PDH

    $80.00 Add to cart
    Florida Approved Provider #CE99
    Seven Land Surveying courses courses that will earn 24 PDH guaranteed to be accepted by the Florida Board of Professional Surveyors and MappersInstructor: Raymond Bosek, PE

    Land Surveyor’s Ethics: 2 PDH

    Florida Approved Course #9620

    In this ethics course the student will understand the standards of professional behavior for adherence to the highest ethical conduct and revisit the emphasis that the holder of a professional license has a direct and vital impact on the safety, health, and welfare of the public.

    Public Land Survey: Rectangular System: 8 PDH

    Florida Approved Course #9627

    In this course the student will review the rectangular surveying system which has been used continuously in the United States since 1785. As all facets of this system occasionally come into use, the student will become well versed in the field procedures of conducting an original survey covering both historical and current methods.

    Satellite Photogrammetry: 2 PDH

    Florida Approved Course #9628

    In this course the student will learn about satellite photogrammetry and its common applications. The student will review geo-positioning from satellite images and procedures for creating stereo pairs from satellite imagery as well as reviewing the top things to consider in buying optical satellite imagery.

    Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors : 4 PDH

    Florida Approved Course #9626

    This course is an introduction of using sUAS in land surveying. From FAA licensing requirements to common sUAS products and software, with an understanding of these basics a land surveyor can easily get started in using this up and coming technology.

    Description of Lands: 3 PDH

    Florida Approved Course #9625

    In this course the student will review the principles of Airborne Topographic LiDAR and learn how to utilize methods to employ this technology in the field.

    Corner Restoration Fundamentals: 2 PDH

    Florida Approved Course #9624

    In this course the student will understand the understand federal guidelines of resurveying corner monuments and the procedures and laws to successfully reestablish these boundaries.

    Construction Surveying Curves: 3 PDH

    Florida Approved Course #9623

    In this course the student will learns to locate points using angles and distances for establishing curves. An essential tool in construction surveying when determining the line of a curve for road layout or some other type of curved construction.

State Approvals

All of our online courses comply with the Continuing Professional Competency Guidelines published by the National Council of Examiners for Engineering and Surveying (NCEES) and the International Association for Continuing Education & Training (IACEP), therefore, shall be acceptable to all the state boards requiring mandatory continuing education.
EZ-pdh.com approved provider map of USA for professional engineersKey
Approved Providers Mandatory

This column lists states which require continuing education (CE) be completed with a state approved provider. We are approved in all of the seven states requiring pre-approval. “Click to Verify” button will transfer you to the State Board website listing approved providers. We are listed under Ezekiel Enterprises, LLC or EZpdh.com with POC: Raymond Bosek

Florida:
Approved Provider Number:0006346
(listed as Ezekiel Enterprises, LLC)Click to VerifyArchitecture and Interior Design Approved Provider Number:PVD433(listed as Ezekiel Enterprises, LLC)
Click to Verify
Indiana:
CE Approved Provider CE21800049(listed as Ezekiel Enterprises, LLC)
Click to Verify
Louisiana:
CPD Approved Provider CPD.0000317(listed as Ezekiel Enterprises, LLC)
Click to VerifyMaryland:
Approved Provider(listed as EZpdh.com)
Click to VerifyNew Jersey:
Approved CPC Provider 24GP00009900(listed as EZpdh.com)
Click to VerifyNew York:
NYSED Approved Sponsor #166(listed as Ezekiel Enterprises, LLC)
Click to VerifyNorth Carolina:
Approved Sponsor Number:S-0650(listed as Ezekiel Enterprises, LLC)
Click to Verify

Not Mandatory

This column lists states which DO NOT require continuing education (CE) to be completed with a state approved provider. States transfer responsibility to engineer to determine if the CE is acceptable and the state reserves the right to disallow hours if they determined hours are unacceptable. We recommend to complete CE with only state pre-approved providers

Alabama
Alaska
Arkansas
Delaware
Georgia
Idaho
Illinois
Iowa
Kansas
Kentucky
Maine
Maryland
Michigan
Minnesota
Mississippi
Missouri
Montana
Nebraska
Nevada
New Hampshire
New Mexico
North Dakota
Ohio
Oklahoma
Oregon
Pennsylvania
South Carolina
South Dakota
Tennessee
Texas
Utah
Vermont
Virginia
West Virginia
Wisconsin
Wyoming

Read More about State ApprovalsAre you a Land Surveyor? – Click Here for State Approvals

Scroll to Top