New Jersey Packages

  • Sale! Civil Engineering Courses
    New Jersey CPC Approved Provider 24GP00009900
    Five Civil Engineering courses plus New Jersey Statutes, Regulations & Ethics course that will earn 24 PDH guaranteed to be accepted by the New Jersey State Board of Professional Engineers and Land Surveyors.Instructor: Raymond Bosek, PE

    New Jersey – Ethics, Statutes and Regulations for Professional Engineers: 4 PDH

    This course satisfies the 2 required hours of professional practice ethics, ref. § 13:40-13.1

    In this course the student will study two ethics courses including the New Jersey State Board of Professional Engineers and Land Surveyors Statutes and Regulations.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Engineering Human Performance Optimization in the Workplace: 4 PDH

    In this course the student will understand the strategic approach for improving performance to reduce human error and manage controls so as to reduce unwanted events and/or mitigate their impact should they occur. The student will learn methods and techniques for catching and reducing errors and locating and eliminating latent organizational weaknesses.

    Gravel Road Construction: 4 PDH

    It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.

    Lessons Learned-Design and Construction of Buildings: 3 PDH

    In this course the student will review lessons learned from post building occupancy evaluations to understand common building design and/or construction flaws and review essential tips to correct, avoid and/or mitigate these occurrences.

    Residential Structural Design: 5 PDH

    In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.

    New Jersey-Civil Engineering Package #2: 24 PDH

    $80.00 Add to cart
    New Jersey CPC Approved Provider 24GP00009900
    Five Civil Engineering courses plus New Jersey Statutes, Regulations & Ethics course that will earn 24 PDH guaranteed to be accepted by the New Jersey State Board of Professional Engineers and Land Surveyors.Instructor: Raymond Bosek, PE

    New Jersey – Ethics, Statutes and Regulations for Professional Engineers: 4 PDH

    This course satisfies the 2 required hours of professional practice ethics, ref. § 13:40-13.1

    In this course the student will study two ethics courses including the New Jersey State Board of Professional Engineers and Land Surveyors Statutes and Regulations.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Engineering Human Performance Optimization in the Workplace: 4 PDH

    In this course the student will understand the strategic approach for improving performance to reduce human error and manage controls so as to reduce unwanted events and/or mitigate their impact should they occur. The student will learn methods and techniques for catching and reducing errors and locating and eliminating latent organizational weaknesses.

    Gravel Road Construction: 4 PDH

    It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.

    Lessons Learned-Design and Construction of Buildings: 3 PDH

    In this course the student will review lessons learned from post building occupancy evaluations to understand common building design and/or construction flaws and review essential tips to correct, avoid and/or mitigate these occurrences.

    Residential Structural Design: 5 PDH

    In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.

  • Sale! Civil Engineering Courses
    New Jersey CPC Approved Provider 24GP00009900
    Five Civil Engineering courses plus New Jersey Statutes, Regulations & Ethics course that will earn 24 PDH guaranteed to be accepted by the New Jersey State Board of Professional Engineers and Land Surveyors.Instructor: Raymond Bosek, PE

    New Jersey – Ethics, Statutes and Regulations for Professional Engineers: 4 PDH

    This course satisfies the 2 required hours of professional practice ethics, ref. § 13:40-13.1

    In this course the student will study two ethics courses including the New Jersey State Board of Professional Engineers and Land Surveyors Statutes and Regulations.

    Stress and Strain in Soils: 4 PDH

    In this course the student will understand the properties and mechanics of soils and accurately calculate the stresses and deformations of soil masses.

    Engineering Description of Soils and Rocks: 4 PDH

    In this course the student will understand the engineering characteristics of soils and rocks and to how to properly identify and classify to develop a subsurface profile for site evaluations.

    Slope Stability in Embankments and Structures: 5 PDH

    In this course the student will understand the design of slope stability in embankments and structures and how to recognize, analyze, and solve slope instability issues encountered.

    Approach Roadway Deformations: 4 PDH

    In this course the student will understand roadway approach embankment design and construction and methods to mitigate deformations typically seen in these structure, including the infamous “bump” encountered at the approach to structure interface.

    Strategies for Improving Sustainability of Asphalt Pavements: 3 PDH

    In this course the student will understand sustainability throughout the entire pavement life cycle and the importance of recognizing context sensitivity and assessing trade-offs in developing sustainable solutions.

    New Jersey-Civil Engineering Package: 24 PDH

    $80.00 Add to cart
    New Jersey CPC Approved Provider 24GP00009900
    Five Civil Engineering courses plus New Jersey Statutes, Regulations & Ethics course that will earn 24 PDH guaranteed to be accepted by the New Jersey State Board of Professional Engineers and Land Surveyors.Instructor: Raymond Bosek, PE

    New Jersey – Ethics, Statutes and Regulations for Professional Engineers: 4 PDH

    This course satisfies the 2 required hours of professional practice ethics, ref. § 13:40-13.1

    In this course the student will study two ethics courses including the New Jersey State Board of Professional Engineers and Land Surveyors Statutes and Regulations.

    Stress and Strain in Soils: 4 PDH

    In this course the student will understand the properties and mechanics of soils and accurately calculate the stresses and deformations of soil masses.

    Engineering Description of Soils and Rocks: 4 PDH

    In this course the student will understand the engineering characteristics of soils and rocks and to how to properly identify and classify to develop a subsurface profile for site evaluations.

    Slope Stability in Embankments and Structures: 5 PDH

    In this course the student will understand the design of slope stability in embankments and structures and how to recognize, analyze, and solve slope instability issues encountered.

    Approach Roadway Deformations: 4 PDH

    In this course the student will understand roadway approach embankment design and construction and methods to mitigate deformations typically seen in these structure, including the infamous “bump” encountered at the approach to structure interface.

    Strategies for Improving Sustainability of Asphalt Pavements: 3 PDH

    In this course the student will understand sustainability throughout the entire pavement life cycle and the importance of recognizing context sensitivity and assessing trade-offs in developing sustainable solutions.

  • Sale! Electrical Engineering Courses
    New Jersey CPC Approved Provider 24GP00009900
    Five Electrical Engineering courses plus New Jersey Statutes, Regulations & Ethics course that will earn 24 PDH guaranteed to be accepted by the New Jersey State Board of Professional Engineers and Land Surveyors.Instructor: Juan Pesante, PE

    New Jersey – Ethics, Statutes and Regulations for Professional Engineers: 4 PDH

    This course satisfies the 2 required hours of professional practice ethics, ref. § 13:40-13.1
    In this course the student will study two ethics courses including the New Jersey State Board of Professional Engineers and Land Surveyors Statutes and Regulations.

    2023 NEC Significant Code Changes Part 1: 4 PDH

    Part 1 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    2023 NEC Significant Code Changes Part 2: 4 PDH

    Part 2 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    2023 NEC Significant Code Changes Part 3: 4 PDH

    Part 3 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    Blockchain Technology Overview: 3 PDH

    In this course the student will be introduced to Blockchain technology, from its history and beginnings, through the various components, models, and make-up and finally its applications and limitations.

    Electrical Safety: 5 PDH

    In this course the student will understand the dangers and hazards when working with or near electrical power and approaches to work safely to avoid serious injury.

    New Jersey-Electrical Engineering Package #2: 24 PDH

    $80.00 Add to cart
    New Jersey CPC Approved Provider 24GP00009900
    Five Electrical Engineering courses plus New Jersey Statutes, Regulations & Ethics course that will earn 24 PDH guaranteed to be accepted by the New Jersey State Board of Professional Engineers and Land Surveyors.Instructor: Juan Pesante, PE

    New Jersey – Ethics, Statutes and Regulations for Professional Engineers: 4 PDH

    This course satisfies the 2 required hours of professional practice ethics, ref. § 13:40-13.1
    In this course the student will study two ethics courses including the New Jersey State Board of Professional Engineers and Land Surveyors Statutes and Regulations.

    2023 NEC Significant Code Changes Part 1: 4 PDH

    Part 1 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    2023 NEC Significant Code Changes Part 2: 4 PDH

    Part 2 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    2023 NEC Significant Code Changes Part 3: 4 PDH

    Part 3 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    Blockchain Technology Overview: 3 PDH

    In this course the student will be introduced to Blockchain technology, from its history and beginnings, through the various components, models, and make-up and finally its applications and limitations.

    Electrical Safety: 5 PDH

    In this course the student will understand the dangers and hazards when working with or near electrical power and approaches to work safely to avoid serious injury.

  • Sale! Electrical Engineering Courses
    New Jersey CPC Approved Provider 24GP00009900
    Five Electrical Engineering courses plus New Jersey Statutes, Regulations & Ethics course that will earn 24 PDH guaranteed to be accepted by the New Jersey State Board of Professional Engineers and Land Surveyors. Instructor: Juan Pesante, PE

    New Jersey – Ethics, Statutes and Regulations for Professional Engineers: 4 PDH

    This course satisfies the 2 required hours of professional practice ethics, ref. § 13:40-13.1

    In this course the student will study two ethics courses including the New Jersey State Board of Professional Engineers and Land Surveyors Statutes and Regulations.

    Design and Development of Hybrid Power Plants: 4 PDH

    In this course the student will understand the hybrid power plant and the necessary design and planning details required to ensure reliable and efficient means for power production.

    Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH

    In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.

    Energy Storage Technology Cost and Performance: 4 PDH

    In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).

    Electrical Storage Guide for Electrical Engineers: 5 PDH

    This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.

    Analysis of National Charging infrastructure for Electric Vehicles: 3 PDH

    This courses addresses the fundamental question of how much plug-in electric vehicle (PEV) charging infrastructure is needed in the United States to support both plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs). In this course the student will understand PEV charging infrastructure requirements and analyze a range of plausible scenarios that consider the relationship between the evolution of the PEV fleet and charging infrastructure.

    New Jersey-Electrical Engineering Package: 24 PDH

    $80.00 Add to cart
    New Jersey CPC Approved Provider 24GP00009900
    Five Electrical Engineering courses plus New Jersey Statutes, Regulations & Ethics course that will earn 24 PDH guaranteed to be accepted by the New Jersey State Board of Professional Engineers and Land Surveyors. Instructor: Juan Pesante, PE

    New Jersey – Ethics, Statutes and Regulations for Professional Engineers: 4 PDH

    This course satisfies the 2 required hours of professional practice ethics, ref. § 13:40-13.1

    In this course the student will study two ethics courses including the New Jersey State Board of Professional Engineers and Land Surveyors Statutes and Regulations.

    Design and Development of Hybrid Power Plants: 4 PDH

    In this course the student will understand the hybrid power plant and the necessary design and planning details required to ensure reliable and efficient means for power production.

    Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH

    In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.

    Energy Storage Technology Cost and Performance: 4 PDH

    In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).

    Electrical Storage Guide for Electrical Engineers: 5 PDH

    This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.

    Analysis of National Charging infrastructure for Electric Vehicles: 3 PDH

    This courses addresses the fundamental question of how much plug-in electric vehicle (PEV) charging infrastructure is needed in the United States to support both plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs). In this course the student will understand PEV charging infrastructure requirements and analyze a range of plausible scenarios that consider the relationship between the evolution of the PEV fleet and charging infrastructure.

  • Sale! Mechanical Engineering Courses
    New Jersey CPC Approved Provider 24GP00009900
    Five Mechanical Engineering courses plus New Jersey Statutes, Regulations & Ethics course that will earn 24 PDH guaranteed to be accepted by the New Jersey State Board of Professional Engineers and Land Surveyors.Instructor: Seth Grablow, PE

    New Jersey – Ethics, Statutes and Regulations for Professional Engineers: 4 PDH

    This course satisfies the 2 required hours of professional practice ethics, ref. § 13:40-13.1
    In this course the student will study two ethics courses including the New Jersey State Board of Professional Engineers and Land Surveyors Statutes and Regulations.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Engineering Human Performance Optimization in the Workplace: 4 PDH

    In this course the student will understand the strategic approach for improving performance to reduce human error and manage controls so as to reduce unwanted events and/or mitigate their impact should they occur. The student will learn methods and techniques for catching and reducing errors and locating and eliminating latent organizational weaknesses.

    Fire Protection Systems: 3 PDH

    In this course the student will understand fire protection systems and fire protection system operations and will be able to familiarize themselves with the various systems and components including operations and maintenance/ inspection procedures.

    Improving Motor and Drive System Performance: 5 PDH

    This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.

    Principles of Hydraulic and Pneumatic Systems: 4 PDH

    In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.

    New Jersey-Mechanical Engineering Package #2: 24 PDH

    $80.00 Add to cart
    New Jersey CPC Approved Provider 24GP00009900
    Five Mechanical Engineering courses plus New Jersey Statutes, Regulations & Ethics course that will earn 24 PDH guaranteed to be accepted by the New Jersey State Board of Professional Engineers and Land Surveyors.Instructor: Seth Grablow, PE

    New Jersey – Ethics, Statutes and Regulations for Professional Engineers: 4 PDH

    This course satisfies the 2 required hours of professional practice ethics, ref. § 13:40-13.1
    In this course the student will study two ethics courses including the New Jersey State Board of Professional Engineers and Land Surveyors Statutes and Regulations.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Engineering Human Performance Optimization in the Workplace: 4 PDH

    In this course the student will understand the strategic approach for improving performance to reduce human error and manage controls so as to reduce unwanted events and/or mitigate their impact should they occur. The student will learn methods and techniques for catching and reducing errors and locating and eliminating latent organizational weaknesses.

    Fire Protection Systems: 3 PDH

    In this course the student will understand fire protection systems and fire protection system operations and will be able to familiarize themselves with the various systems and components including operations and maintenance/ inspection procedures.

    Improving Motor and Drive System Performance: 5 PDH

    This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.

    Principles of Hydraulic and Pneumatic Systems: 4 PDH

    In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.

  • Sale! Mechanical Engineering Courses
    New Jersey CPC Approved Provider 24GP00009900
    Five Mechanical Engineering courses plus New Jersey Statutes, Regulations & Ethics course that will earn 24 PDH guaranteed to be accepted by the New Jersey State Board of Professional Engineers and Land Surveyors.Instructor: Seth Grablow, PE

    New Jersey – Ethics, Statutes and Regulations for Professional Engineers: 4 PDH

    This course satisfies the 2 required hours of professional practice ethics, ref. § 13:40-13.1

    In this course the student will study two ethics courses including the New Jersey State Board of Professional Engineers and Land Surveyors Statutes and Regulations.

    Improving Pumping System Performance: 4 PDH

    This course provides a thorough overview of pumping systems and their components and practical guidelines to enhance performance and increase efficiency.

    Improving Process Heating System Performance: 4 PDH

    This course provides a thorough overview of process heating systems and their components and practical guidelines to enhance performance and increase efficiency.

    Improving Steam System Performance: 5 PDH

    This course provides a thorough overview of steam systems and their components and practical guidelines to enhance performance and increase efficiency.

    Improving Compressed Air System Performance: 4 PDH

    This course provides a thorough overview of compressed air systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.

    Coating Types and Characteristics of Metals: 3 PDH

    In this course the student will understand the characteristics and applications of various industrial coatings and metal finishes.

    New Jersey-Mechanical Engineering Package: 24 PDH

    $80.00 Add to cart
    New Jersey CPC Approved Provider 24GP00009900
    Five Mechanical Engineering courses plus New Jersey Statutes, Regulations & Ethics course that will earn 24 PDH guaranteed to be accepted by the New Jersey State Board of Professional Engineers and Land Surveyors.Instructor: Seth Grablow, PE

    New Jersey – Ethics, Statutes and Regulations for Professional Engineers: 4 PDH

    This course satisfies the 2 required hours of professional practice ethics, ref. § 13:40-13.1

    In this course the student will study two ethics courses including the New Jersey State Board of Professional Engineers and Land Surveyors Statutes and Regulations.

    Improving Pumping System Performance: 4 PDH

    This course provides a thorough overview of pumping systems and their components and practical guidelines to enhance performance and increase efficiency.

    Improving Process Heating System Performance: 4 PDH

    This course provides a thorough overview of process heating systems and their components and practical guidelines to enhance performance and increase efficiency.

    Improving Steam System Performance: 5 PDH

    This course provides a thorough overview of steam systems and their components and practical guidelines to enhance performance and increase efficiency.

    Improving Compressed Air System Performance: 4 PDH

    This course provides a thorough overview of compressed air systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.

    Coating Types and Characteristics of Metals: 3 PDH

    In this course the student will understand the characteristics and applications of various industrial coatings and metal finishes.

  • Sale! Environmental Engineering Courses
    New Jersey CPC Approved Provider 24GP00009900
    Eight Environmental Engineering courses plus New Jersey Ethics, Statutes, and Regulations course that will earn 24 PDH guaranteed to be accepted by the New Jersey State Board of Professional Engineers and Land SurveyorsInstructor: Raymond Bosek, PE

    New Jersey – Ethics, Statutes, and Regulations for Professional Engineers: 4 PDH

    This course satisfies the 2 required hours of professional practice ethics, ref. § 13:40-13.1

    In this course the student will study two ethics courses including the New Jersey State Board of Professional Engineers and Land Surveyors Statutes and Regulations. A total of thirty (30) questions will test his or her understanding of the subject.

    A Guide to Offshore Wind Energy: 2 PDH

    Offshore wind turbines harness the energy of the ocean winds and turn it into electricity. This course introduces the basic principles of proposed US offshore wind facilities. The course summarizes a study conducted by EESI of existing European and Asian offshore wind farms. The topics addressed include technical issues related to marine foundations and structures, transmission issues unique to offshore power generation, political and regulatory issues and the public’s perceptions of proposed offshore wind farms. This course demonstrates that offshore wind energy has been successfully implemented in other parts of the world and that the potential for wind farms in U.S. waters is favorable.

    Building Envelope Impact on HVAC Energy Use: 3 PDH

    How airtight are the buildings you are responsible for? What is the energy load and indoor air quality like in your buildings? The only way to know is to perform a study. Despite common assumptions, measurements have shown that typical U.S. commercial buildings are not particularly airtight. In this course we present a recent simulation study on the impact of improving envelope airtightness in U.S. commercial buildings. You get documented, verifiable facts, report charts and graphs illustrating the findings, and a discussion from the report on the results of the study, Investigation of the Impact of Commercial Building Envelope Airtightness on HVAC Energy Use.

    Hurricane Mitigation: Summary Report On Building Performance: 3 PDH

    After major hurricane disasters, the Federal Emergency Management Agency (FEMA) dispatches Building Performance Assessment Teams (BPATs) to evaluate the successes and failures of buildings to withstand the wind and flood forces of these storms. The teams document the results of their evaluations in building performance assessment reports. This 3-hour online course summarizes the BPAT reports for Hurricane Katerina.CFs.

    Ponds-Planning, Design, Construction: 2 PDH

    This course provides guidance on some of the required criteria the United States Department of Agriculture (USDA) has in place for the planning, design, construction and maintenance of ponds. This course describes basic design principles of embankment and excavation ponds as well as construction requirements. This online PDH course is intended for hydrologists, civil engineers, agricultural engineers, construction engineers, municipal engineers, geotechnical engineers and environmental engineers.

    Hazardous Waste Identification: 2 PDH

    This course covers hazardous waste regulated by the EPA under the Resource Conservation and Recovery Act (RCRA), starting with determining whether what waste is considered a solid waste according to the RCRA regulations and moving on to determining if it fits one of the RCRA requirements for being a hazardous waste.

    Carbon Absorption of Volatile Organic Compounds: 3 PDH

    Carbon adsorption is used in air pollution control to remove volatile organic compounds (VOCs) from low to medium concentration gas streams, when stringent outlet concentration must be met and/or recovery of the VOC is desired. This course covers the types of adsorbers, adsorption theory, and design procedures for carbon adsorption equipment.

    Design of Small Water Systems: 3 PDH

    This course focuses on criteria for water source development, design of small water supply, treatment, and distribution systems. This professional engineer online course is from the U.S. Army Corps of Engineers manual on the Design of Small Water Systems. This manual provides information of interest to planners and designers of small water systems. The major emphasis of this course is on the design of systems that will be effective and reliable, requiring a level of operation and management activity commensurate with their physical size and the available sources.

    Energy Performance of LEED for New Construction Buildings: 2 PDH

    This course focuses on the measured energy performance for 121 LEED New Construction buildings, and compares the data to a variety of benchmarks, including Commercial Building Energy Consumption Survey (CBECS) averages, Energy Star ratings and modeled energy performance estimates provided with LEED submittals.

    New Jersey-Environmental Engineering Package: 24 PDH

    $80.00 Add to cart
    New Jersey CPC Approved Provider 24GP00009900
    Eight Environmental Engineering courses plus New Jersey Ethics, Statutes, and Regulations course that will earn 24 PDH guaranteed to be accepted by the New Jersey State Board of Professional Engineers and Land SurveyorsInstructor: Raymond Bosek, PE

    New Jersey – Ethics, Statutes, and Regulations for Professional Engineers: 4 PDH

    This course satisfies the 2 required hours of professional practice ethics, ref. § 13:40-13.1

    In this course the student will study two ethics courses including the New Jersey State Board of Professional Engineers and Land Surveyors Statutes and Regulations. A total of thirty (30) questions will test his or her understanding of the subject.

    A Guide to Offshore Wind Energy: 2 PDH

    Offshore wind turbines harness the energy of the ocean winds and turn it into electricity. This course introduces the basic principles of proposed US offshore wind facilities. The course summarizes a study conducted by EESI of existing European and Asian offshore wind farms. The topics addressed include technical issues related to marine foundations and structures, transmission issues unique to offshore power generation, political and regulatory issues and the public’s perceptions of proposed offshore wind farms. This course demonstrates that offshore wind energy has been successfully implemented in other parts of the world and that the potential for wind farms in U.S. waters is favorable.

    Building Envelope Impact on HVAC Energy Use: 3 PDH

    How airtight are the buildings you are responsible for? What is the energy load and indoor air quality like in your buildings? The only way to know is to perform a study. Despite common assumptions, measurements have shown that typical U.S. commercial buildings are not particularly airtight. In this course we present a recent simulation study on the impact of improving envelope airtightness in U.S. commercial buildings. You get documented, verifiable facts, report charts and graphs illustrating the findings, and a discussion from the report on the results of the study, Investigation of the Impact of Commercial Building Envelope Airtightness on HVAC Energy Use.

    Hurricane Mitigation: Summary Report On Building Performance: 3 PDH

    After major hurricane disasters, the Federal Emergency Management Agency (FEMA) dispatches Building Performance Assessment Teams (BPATs) to evaluate the successes and failures of buildings to withstand the wind and flood forces of these storms. The teams document the results of their evaluations in building performance assessment reports. This 3-hour online course summarizes the BPAT reports for Hurricane Katerina.CFs.

    Ponds-Planning, Design, Construction: 2 PDH

    This course provides guidance on some of the required criteria the United States Department of Agriculture (USDA) has in place for the planning, design, construction and maintenance of ponds. This course describes basic design principles of embankment and excavation ponds as well as construction requirements. This online PDH course is intended for hydrologists, civil engineers, agricultural engineers, construction engineers, municipal engineers, geotechnical engineers and environmental engineers.

    Hazardous Waste Identification: 2 PDH

    This course covers hazardous waste regulated by the EPA under the Resource Conservation and Recovery Act (RCRA), starting with determining whether what waste is considered a solid waste according to the RCRA regulations and moving on to determining if it fits one of the RCRA requirements for being a hazardous waste.

    Carbon Absorption of Volatile Organic Compounds: 3 PDH

    Carbon adsorption is used in air pollution control to remove volatile organic compounds (VOCs) from low to medium concentration gas streams, when stringent outlet concentration must be met and/or recovery of the VOC is desired. This course covers the types of adsorbers, adsorption theory, and design procedures for carbon adsorption equipment.

    Design of Small Water Systems: 3 PDH

    This course focuses on criteria for water source development, design of small water supply, treatment, and distribution systems. This professional engineer online course is from the U.S. Army Corps of Engineers manual on the Design of Small Water Systems. This manual provides information of interest to planners and designers of small water systems. The major emphasis of this course is on the design of systems that will be effective and reliable, requiring a level of operation and management activity commensurate with their physical size and the available sources.

    Energy Performance of LEED for New Construction Buildings: 2 PDH

    This course focuses on the measured energy performance for 121 LEED New Construction buildings, and compares the data to a variety of benchmarks, including Commercial Building Energy Consumption Survey (CBECS) averages, Energy Star ratings and modeled energy performance estimates provided with LEED submittals.

State Approvals

All of our online courses comply with the Continuing Professional Competency Guidelines published by the National Council of Examiners for Engineering and Surveying (NCEES) and the International Association for Continuing Education & Training (IACEP), therefore, shall be acceptable to all the state boards requiring mandatory continuing education.
EZ-pdh.com approved provider map of USA for professional engineersKey
Approved Providers Mandatory

This column lists states which require continuing education (CE) be completed with a state approved provider. We are approved in all of the seven states requiring pre-approval. “Click to Verify” button will transfer you to the State Board website listing approved providers. We are listed under Ezekiel Enterprises, LLC or EZpdh.com with POC: Raymond Bosek

Florida:
Approved Provider Number:0006346
(listed as Ezekiel Enterprises, LLC)Click to VerifyArchitecture and Interior Design Approved Provider Number:PVD433(listed as Ezekiel Enterprises, LLC)
Click to Verify
Indiana:
CE Approved Provider CE21800049(listed as Ezekiel Enterprises, LLC)
Click to Verify
Louisiana:
CPD Approved Provider CPD.0000317(listed as Ezekiel Enterprises, LLC)
Click to VerifyMaryland:
Approved Provider(listed as EZpdh.com)
Click to VerifyNew Jersey:
Approved CPC Provider 24GP00009900(listed as EZpdh.com)
Click to VerifyNew York:
NYSED Approved Sponsor #166(listed as Ezekiel Enterprises, LLC)
Click to VerifyNorth Carolina:
Approved Sponsor Number:S-0650(listed as Ezekiel Enterprises, LLC)
Click to Verify

Not Mandatory

This column lists states which DO NOT require continuing education (CE) to be completed with a state approved provider. States transfer responsibility to engineer to determine if the CE is acceptable and the state reserves the right to disallow hours if they determined hours are unacceptable. We recommend to complete CE with only state pre-approved providers

Alabama
Alaska
Arkansas
Delaware
Georgia
Idaho
Illinois
Iowa
Kansas
Kentucky
Maine
Maryland
Michigan
Minnesota
Mississippi
Missouri
Montana
Nebraska
Nevada
New Hampshire
New Mexico
North Dakota
Ohio
Oklahoma
Oregon
Pennsylvania
South Carolina
South Dakota
Tennessee
Texas
Utah
Vermont
Virginia
West Virginia
Wisconsin
Wyoming

Read More about State ApprovalsAre you a Land Surveyor? – Click Here for State Approvals

Scroll to Top