New York Packages

  • Sale! Civil Engineering Courses
    New York Approved Sponsor #166
    Recent NYSED Update: Live webinars no longer mandatory per §68.14 c.3.
    This package satisfies all 36 required hours of professional development with

    1. 1 hour professional ethics, ref. §68.14 c.1.
    2. 36 hours of distance education courses, ref. §68.14 c.3.
    Eight Civil Engineering courses plus New York Laws, Rules & Ethics course that will earn 36 PDH guaranteed to be accepted by the New York State Education Department-Professional Engineering and Land SurveyingInstructor: Raymond Bosek, PE

    New York – Laws, Rules, and Ethics for Professional Engineers: 3 PDH

    In this course the student will study the New York State Board for Engineering and Land Surveying Laws & Rules including Professional Engineering Ethics.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Engineering Human Performance Optimization in the Workplace: 4 PDH

    In this course the student will understand the strategic approach for improving performance to reduce human error and manage controls so as to reduce unwanted events and/or mitigate their impact should they occur. The student will learn methods and techniques for catching and reducing errors and locating and eliminating latent organizational weaknesses.

    Gravel Road Construction: 4 PDH

    It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.

    Lessons Learned-Design and Construction of Buildings: 3 PDH

    In this course the student will review lessons learned from post building occupancy evaluations to understand common building design and/or construction flaws and review essential tips to correct, avoid and/or mitigate these occurrences.

    Remote Sensing Essentials: 5 PDH

    In this course the student will understand the theory and practice of remote sensing and image processing. Remote sensing is valuable tool for engineers and surveyors as it provides a cost-effective means of surveying, monitoring, and mapping objects at or near the surface of the Earth.

    Residential Structural Design: 5 PDH

    In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.

    Strategies for Improving Sustainability of Concrete Pavements: 3 PDH

    In this course the student will understand sustainability throughout the entire concrete pavement life cycle and the importance of recognizing context sensitivity and assessing trade-offs in developing sustainable solutions.

    Sustainable Concrete Pavements: 5 PDH

    In this course the student will understand concrete pavement sustainability concepts and recommended practices for maximizing the sustainability of concrete pavements.

    New York-Civil Engineering Package #2: 36 PDH

    $108.00 Add to cart
    New York Approved Sponsor #166
    Recent NYSED Update: Live webinars no longer mandatory per §68.14 c.3.
    This package satisfies all 36 required hours of professional development with

    1. 1 hour professional ethics, ref. §68.14 c.1.
    2. 36 hours of distance education courses, ref. §68.14 c.3.
    Eight Civil Engineering courses plus New York Laws, Rules & Ethics course that will earn 36 PDH guaranteed to be accepted by the New York State Education Department-Professional Engineering and Land SurveyingInstructor: Raymond Bosek, PE

    New York – Laws, Rules, and Ethics for Professional Engineers: 3 PDH

    In this course the student will study the New York State Board for Engineering and Land Surveying Laws & Rules including Professional Engineering Ethics.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Engineering Human Performance Optimization in the Workplace: 4 PDH

    In this course the student will understand the strategic approach for improving performance to reduce human error and manage controls so as to reduce unwanted events and/or mitigate their impact should they occur. The student will learn methods and techniques for catching and reducing errors and locating and eliminating latent organizational weaknesses.

    Gravel Road Construction: 4 PDH

    It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.

    Lessons Learned-Design and Construction of Buildings: 3 PDH

    In this course the student will review lessons learned from post building occupancy evaluations to understand common building design and/or construction flaws and review essential tips to correct, avoid and/or mitigate these occurrences.

    Remote Sensing Essentials: 5 PDH

    In this course the student will understand the theory and practice of remote sensing and image processing. Remote sensing is valuable tool for engineers and surveyors as it provides a cost-effective means of surveying, monitoring, and mapping objects at or near the surface of the Earth.

    Residential Structural Design: 5 PDH

    In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.

    Strategies for Improving Sustainability of Concrete Pavements: 3 PDH

    In this course the student will understand sustainability throughout the entire concrete pavement life cycle and the importance of recognizing context sensitivity and assessing trade-offs in developing sustainable solutions.

    Sustainable Concrete Pavements: 5 PDH

    In this course the student will understand concrete pavement sustainability concepts and recommended practices for maximizing the sustainability of concrete pavements.

  • Sale!
    New York Approved Sponsor #166
    This package satisfies all 36 required hours of professional development.

    1. 1 hour professional ethics, ref. §68.14 c.1.
    2. 18 hours of live interactive courses, ref. ref. §68.14 c.3.
    3. 18 hours of distance education courses, ref. ref. §68.14 c.3.
    Fifteen live interactive webinars and four distance learning courses guaranteed to be accepted by the New York State Education Department-Professional Engineering and Land SurveyingInstructor: Raymond Bosek, PE
    Package includes the following 15 live interactive courses:
    View Webinar Schedule

    Webinar: Design for Construction Safety: 1 PDH

    This course will provide engineers with information on how to recognize and anticipate construction hazards and how to eliminate them with well thought out design features. This course emphasizes permanent design features that eliminate or reduce the risk to hazards.Read More

    Webinar: Ethics for the Practicing Engineer: 1 PDH

    In this introductory ethics course the engineer will understand why we study ethics as engineering professionals, ethical theories to use in our ethical decision making, and some tools to identify and resolve ethical conflicts.Read More

    Webinar: Administering the Construction Project: 2.5 PDH

    In this course we will review the management and administrative procedures that practitioners will need to guide construction projects from the pre-construction phase to project close out successfully. The course will benefit professional engineers serving as project managers or field representatives by presenting techniques that can be applied to the construction project to enhance operations, improve scheduling, mitigate issues, and help minimize and resolve claims or disputes.Read More

    Webinar: Infrastructure Planning: 2 PDH

    This course presents the main concepts of infrastructure planning in the public sector including the environmental, social, and institutional assessments and discusses many planning methodologies and approaches. The purpose of this course is to provide practitioners involved in planning public infrastructure projects with guidelines to be considered and applied in the planning process.Read More

    Webinar: Storm Shelters & Safe Rooms: 1 PDH

    This course presents engineers with important information about the design and construction of community and residential safe rooms that will provide protection during tornado and hurricane events. The course will center around design guides FEMA P-320, P-361, and ICC 500.Read More

    Webinar: Bases and Subbases for Concrete Pavements: 1 PDH

    In this course the student will understand the best practices for the design and construction of bases and subbases for concrete pavements as well as the effects on performance.Read More

    Webinar: Internal Curing for Concrete Pavements: 1 PDH

    In this course the student will understand the concepts and benefits of internal curing for concrete pavements including mixture design, quality control, and studies of practical applications over the past two decades.Read More

    Webinar: Roller Compact Concrete Pavements: 1 PDH

    This introductory course provides the engineer the basic understanding of the fundamentals of RCCP in design and construction. It presents an overview of the best practices for roller-compacted concrete pavement, its uses, its mixtures and construction.Read More

    Webinar: OSHA Noise Hazards: 0.5 PDH

    This Course presents an overview of the hazards of workplace noise, especially evident in the construction industry; and steps to identity, mitigate, and control this hazard.Read More

    Webinar: Fasteners: 1.5 PDH

    This course presents an in-depth look at steel fasteners with focus on structural fasteners, since they are a critical part of most steel structures. A broad range of topics will be discussed including fastener strength, selection criteria, available coatings and testing. This course will go beyond the standards and specifications and provide engineers with helpful background information and practical strategies to mitigate fastener issues and keep projects trouble free.Read More

    Webinar: Engineer’s Guide to Green Building: 1 PDH

    In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of the attributes of green building methods and products and the design and developing considerations for all building & home systems.Read More

    Webinar: Engineer’s Guide to Green Building-Part 2: 2 PDH

    In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of an in-depth examination of all green materials and methods for building green, and a comprehensive green building checklist to review before, during, and after any green build.Read More

    Webinar: Accessibility: 2010 ADA Guidelines – Building Blocks: 1 PDH

    The Americans with Disabilities Act (ADA) is a federal civil rights law intended to protect qualified persons with disabilities from discrimination. The ADA covers a wide range of legal and regulatory issues with regard to Americans with disabilities. This course will focus on the Americans with Disabilities Act Accessibility Guidelines for Buildings and Facilities (the 2010 ADA Accessibility Design Guidelines): it will cover an overview of ADA, its impact/compliance on new construction and existing facilities and will deep dive into chapter 3: Building Blocks of the ADA guidelines covering in detail all regulations and requirements.Read More

    Webinar: Accessibility: 2010 ADA Guidelines – Accessible Routes: 1.5 PDH

    This course will focus on the Americans with Disabilities Act Accessibility Guidelines for Buildings and Facilities (the 2010 ADA Accessibility Design Guidelines): it will deep dive into chapter 4: Accessible Routes of the ADA guidelines covering in detail all regulations and requirements.Read More

    Webinar: 2023 NEC Significant Code Changes Part 1: 1 PDH

    Part 1 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC from the introduction up to Chapter 2 Article 230.Read More

    Package includes the following four distance education courses:

    Approach Roadway Deformations: 4 PDH

    In this course the student will understand roadway approach embankment design and construction and methods to mitigate deformations typically seen in these structure, including the infamous “bump” encountered at the approach to structure interface.Read MorePreview Course

    Geotechnical Subsurface Exploration for Roadways: 5 PDH

    In this course the student will understand the essentials of subsurface explorations for roadways with a comprehensive overview including site preparation, sampling methods, types of testing and methods, as well as standard guidelines and recommendations.Read MorePreview Course

    Slope Stability in Embankments and Structures: 5 PDH

    In this course the student will understand the design of slope stability in embankments and structures and how to recognize, analyze, and solve slope instability issues encountered.Read MorePreview Course

    Stress and Strain in Soils: 4 PDH

    In this course the student will understand the properties and mechanics of soils and accurately calculate the stresses and deformations of soil masses.Read MorePreview Course

    New York-Civil Engineering Package: 36 PDH

    $189.00 Add to cart
    New York Approved Sponsor #166
    This package satisfies all 36 required hours of professional development.

    1. 1 hour professional ethics, ref. §68.14 c.1.
    2. 18 hours of live interactive courses, ref. ref. §68.14 c.3.
    3. 18 hours of distance education courses, ref. ref. §68.14 c.3.
    Fifteen live interactive webinars and four distance learning courses guaranteed to be accepted by the New York State Education Department-Professional Engineering and Land SurveyingInstructor: Raymond Bosek, PE
    Package includes the following 15 live interactive courses:
    View Webinar Schedule

    Webinar: Design for Construction Safety: 1 PDH

    This course will provide engineers with information on how to recognize and anticipate construction hazards and how to eliminate them with well thought out design features. This course emphasizes permanent design features that eliminate or reduce the risk to hazards.Read More

    Webinar: Ethics for the Practicing Engineer: 1 PDH

    In this introductory ethics course the engineer will understand why we study ethics as engineering professionals, ethical theories to use in our ethical decision making, and some tools to identify and resolve ethical conflicts.Read More

    Webinar: Administering the Construction Project: 2.5 PDH

    In this course we will review the management and administrative procedures that practitioners will need to guide construction projects from the pre-construction phase to project close out successfully. The course will benefit professional engineers serving as project managers or field representatives by presenting techniques that can be applied to the construction project to enhance operations, improve scheduling, mitigate issues, and help minimize and resolve claims or disputes.Read More

    Webinar: Infrastructure Planning: 2 PDH

    This course presents the main concepts of infrastructure planning in the public sector including the environmental, social, and institutional assessments and discusses many planning methodologies and approaches. The purpose of this course is to provide practitioners involved in planning public infrastructure projects with guidelines to be considered and applied in the planning process.Read More

    Webinar: Storm Shelters & Safe Rooms: 1 PDH

    This course presents engineers with important information about the design and construction of community and residential safe rooms that will provide protection during tornado and hurricane events. The course will center around design guides FEMA P-320, P-361, and ICC 500.Read More

    Webinar: Bases and Subbases for Concrete Pavements: 1 PDH

    In this course the student will understand the best practices for the design and construction of bases and subbases for concrete pavements as well as the effects on performance.Read More

    Webinar: Internal Curing for Concrete Pavements: 1 PDH

    In this course the student will understand the concepts and benefits of internal curing for concrete pavements including mixture design, quality control, and studies of practical applications over the past two decades.Read More

    Webinar: Roller Compact Concrete Pavements: 1 PDH

    This introductory course provides the engineer the basic understanding of the fundamentals of RCCP in design and construction. It presents an overview of the best practices for roller-compacted concrete pavement, its uses, its mixtures and construction.Read More

    Webinar: OSHA Noise Hazards: 0.5 PDH

    This Course presents an overview of the hazards of workplace noise, especially evident in the construction industry; and steps to identity, mitigate, and control this hazard.Read More

    Webinar: Fasteners: 1.5 PDH

    This course presents an in-depth look at steel fasteners with focus on structural fasteners, since they are a critical part of most steel structures. A broad range of topics will be discussed including fastener strength, selection criteria, available coatings and testing. This course will go beyond the standards and specifications and provide engineers with helpful background information and practical strategies to mitigate fastener issues and keep projects trouble free.Read More

    Webinar: Engineer’s Guide to Green Building: 1 PDH

    In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of the attributes of green building methods and products and the design and developing considerations for all building & home systems.Read More

    Webinar: Engineer’s Guide to Green Building-Part 2: 2 PDH

    In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of an in-depth examination of all green materials and methods for building green, and a comprehensive green building checklist to review before, during, and after any green build.Read More

    Webinar: Accessibility: 2010 ADA Guidelines – Building Blocks: 1 PDH

    The Americans with Disabilities Act (ADA) is a federal civil rights law intended to protect qualified persons with disabilities from discrimination. The ADA covers a wide range of legal and regulatory issues with regard to Americans with disabilities. This course will focus on the Americans with Disabilities Act Accessibility Guidelines for Buildings and Facilities (the 2010 ADA Accessibility Design Guidelines): it will cover an overview of ADA, its impact/compliance on new construction and existing facilities and will deep dive into chapter 3: Building Blocks of the ADA guidelines covering in detail all regulations and requirements.Read More

    Webinar: Accessibility: 2010 ADA Guidelines – Accessible Routes: 1.5 PDH

    This course will focus on the Americans with Disabilities Act Accessibility Guidelines for Buildings and Facilities (the 2010 ADA Accessibility Design Guidelines): it will deep dive into chapter 4: Accessible Routes of the ADA guidelines covering in detail all regulations and requirements.Read More

    Webinar: 2023 NEC Significant Code Changes Part 1: 1 PDH

    Part 1 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC from the introduction up to Chapter 2 Article 230.Read More

    Package includes the following four distance education courses:

    Approach Roadway Deformations: 4 PDH

    In this course the student will understand roadway approach embankment design and construction and methods to mitigate deformations typically seen in these structure, including the infamous “bump” encountered at the approach to structure interface.Read MorePreview Course

    Geotechnical Subsurface Exploration for Roadways: 5 PDH

    In this course the student will understand the essentials of subsurface explorations for roadways with a comprehensive overview including site preparation, sampling methods, types of testing and methods, as well as standard guidelines and recommendations.Read MorePreview Course

    Slope Stability in Embankments and Structures: 5 PDH

    In this course the student will understand the design of slope stability in embankments and structures and how to recognize, analyze, and solve slope instability issues encountered.Read MorePreview Course

    Stress and Strain in Soils: 4 PDH

    In this course the student will understand the properties and mechanics of soils and accurately calculate the stresses and deformations of soil masses.Read MorePreview Course

  • Sale! Electrical Engineering Courses
    New York Approved Sponsor #166
    Recent NYSED Update: Live webinars no longer mandatory per §68.14 c.3.
    This package satisfies all 36 required hours of professional development with

    1. 1 hour professional ethics, ref. §68.14 c.1.
    2. 36 hours of distance education courses, ref. §68.14 c.3.
    Eight Electrical Engineering courses plus New York Laws, Rules & Ethics course that will earn 36 PDH guaranteed to be accepted by the New York State Education Department-Professional Engineering and Land SurveyingInstructor: Juan Pesante, PE

    New York – Laws, Rules, and Ethics for Professional Engineers: 3 PDH

    In this course the student will study the New York State Board for Engineering and Land Surveying Laws & Rules including Professional Engineering Ethics.

    2023 NEC Significant Code Changes Part 1: 4 PDH

    Part 1 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    2023 NEC Significant Code Changes Part 2: 4 PDH

    Part 2 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    2023 NEC Significant Code Changes Part 3: 4 PDH

    Part 3 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    Analysis of National Charging infrastructure for Electric Vehicles: 3 PDH

    This courses addresses the fundamental question of how much plug-in electric vehicle (PEV) charging infrastructure is needed in the United States to support both plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs). In this course the student will understand PEV charging infrastructure requirements and analyze a range of plausible scenarios that consider the relationship between the evolution of the PEV fleet and charging infrastructure.

    Blockchain Technology Overview: 3 PDH

    In this course the student will be introduced to Blockchain technology, from its history and beginnings, through the various components, models, and make-up and finally its applications and limitations.

    Electrical Safety: 5 PDH

    In this course the student will understand the dangers and hazards when working with or near electrical power and approaches to work safely to avoid serious injury.

    Forecasting Solar Radiation and Photovoltaic Power: 5 PDH

    Solar resource forecasting is critical for the operation and management of solar power plants and electric grids. In this course the student will understand the basic concepts and various methods of solar irradiance forecasting as well as forecasting the power production of Photovoltaic (PV) power plants.

    Solar Energy Measuring and Modeling: 5 PDH

    In this course the student will understand the concepts of measuring and modeling solar radiation, the various measurement systems available, satellite-based and operational models, and forecasting Solar Radiation and predicting Photovoltaic Power.

    New York-Electrical Engineering Package #2: 36 PDH

    $108.00 Add to cart
    New York Approved Sponsor #166
    Recent NYSED Update: Live webinars no longer mandatory per §68.14 c.3.
    This package satisfies all 36 required hours of professional development with

    1. 1 hour professional ethics, ref. §68.14 c.1.
    2. 36 hours of distance education courses, ref. §68.14 c.3.
    Eight Electrical Engineering courses plus New York Laws, Rules & Ethics course that will earn 36 PDH guaranteed to be accepted by the New York State Education Department-Professional Engineering and Land SurveyingInstructor: Juan Pesante, PE

    New York – Laws, Rules, and Ethics for Professional Engineers: 3 PDH

    In this course the student will study the New York State Board for Engineering and Land Surveying Laws & Rules including Professional Engineering Ethics.

    2023 NEC Significant Code Changes Part 1: 4 PDH

    Part 1 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    2023 NEC Significant Code Changes Part 2: 4 PDH

    Part 2 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    2023 NEC Significant Code Changes Part 3: 4 PDH

    Part 3 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    Analysis of National Charging infrastructure for Electric Vehicles: 3 PDH

    This courses addresses the fundamental question of how much plug-in electric vehicle (PEV) charging infrastructure is needed in the United States to support both plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs). In this course the student will understand PEV charging infrastructure requirements and analyze a range of plausible scenarios that consider the relationship between the evolution of the PEV fleet and charging infrastructure.

    Blockchain Technology Overview: 3 PDH

    In this course the student will be introduced to Blockchain technology, from its history and beginnings, through the various components, models, and make-up and finally its applications and limitations.

    Electrical Safety: 5 PDH

    In this course the student will understand the dangers and hazards when working with or near electrical power and approaches to work safely to avoid serious injury.

    Forecasting Solar Radiation and Photovoltaic Power: 5 PDH

    Solar resource forecasting is critical for the operation and management of solar power plants and electric grids. In this course the student will understand the basic concepts and various methods of solar irradiance forecasting as well as forecasting the power production of Photovoltaic (PV) power plants.

    Solar Energy Measuring and Modeling: 5 PDH

    In this course the student will understand the concepts of measuring and modeling solar radiation, the various measurement systems available, satellite-based and operational models, and forecasting Solar Radiation and predicting Photovoltaic Power.

  • Sale!
    New York Approved Sponsor #166
    This package satisfies all 36 required hours of professional development.

    1. 1 hour professional ethics, ref. §68.14 c.1.
    2. 18 hours of live interactive courses, ref. ref. §68.14 c.3.
    3. 18 hours of distance education courses, ref. ref. §68.14 c.3.
    Fourteen live interactive webinars and five distance learning courses guaranteed to be accepted by the New York State Education Department-Professional Engineering and Land SurveyingInstructor: Juan Pesante, PE
    Package includes the following 14 live interactive courses:
    View Webinar Schedule

    Webinar: Design for Construction Safety: 1 PDH

    This course will provide engineers with information on how to recognize and anticipate construction hazards and how to eliminate them with well thought out design features. This course emphasizes permanent design features that eliminate or reduce the risk to hazards.Read More

    Webinar: Ethics for the Practicing Engineer: 1PDH

    In this introductory ethics course the engineer will understand why we study ethics as engineering professionals, ethical theories to use in our ethical decision making, and some tools to identify and resolve ethical conflicts.Read More

    Webinar: Emerging Technologies Connected Vehicles: 1PDH

    As this latest technology emerges, the engineer will learn about connected vehicles, the technologies, and the various public and private programs used for development and testing.Read More

    Webinar: 2023 NEC Significant Code Changes Part 1: 1 PDH

    Part 1 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC from the introduction up to Chapter 2 Article 230.Read More

    Webinar: 2023 NEC Significant Code Changes Part 2: 1 PDH

    Part 2 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC from Chapter 2 Article 230 up though all of Chapter 3.Read More

    Webinar: 2023 NEC Significant Code Changes Part 3: 1 PDH

    Part 3 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC for Chapters 4 and 5.Read More

    Webinar: 2023 NEC Significant Code Changes Part 4: 1 PDH

    Part 4 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC for Chapter 6.Read More

    Webinar: 2023 NEC Significant Code Changes Part 5: 1 PDH

    Part 5 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC for Chapters 7, 8, and 9.Read More

    Webinar: Administering the Construction Project : 2.5 PDH

    In this course we will review the management and administrative procedures that practitioners will need to guide construction projects from the pre-construction phase to project close out successfully. The course will benefit professional engineers serving as project managers or field representatives by presenting techniques that can be applied to the construction project to enhance operations, improve scheduling, mitigate issues, and help minimize and resolve claims or disputes.Read More

    Webinar: Infrastructure Planning: 2 PDH

    This course presents the main concepts of infrastructure planning in the public sector including the environmental, social, and institutional assessments and discusses many planning methodologies and approaches. The purpose of this course is to provide practitioners involved in planning public infrastructure projects with guidelines to be considered and applied in the planning process.Read More

    Webinar: Engineer’s Guide to Green Building: 1 PDH

    In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of the attributes of green building methods and products and the design and developing considerations for all building & home systems.Read More

    Webinar: Engineer’s Guide to Green Building-Part 2: 2 PDH

    In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of an in-depth examination of all green materials and methods for building green, and a comprehensive green building checklist to review before, during, and after any green build.Read More

    Webinar: Diesel Engine Fundamentals: 1.5 PDH

    This course provides the engineer the basic understanding of the operation and design of Diesel Engines. The student will learn in depth, the diesel engine operation including an overview of all basic components as well as the different cycles and the operation of all essential systems of modern day diesel engines.Read More

    Webinar: Storm Shelters & Safe Rooms: 1 PDH

    This course presents engineers with important information about the design and construction of community and residential safe rooms that will provide protection during tornado and hurricane events. The course will center around design guides FEMA P-320, P-361, and ICC 500.Read More

    Package includes the following five distance education courses:

    Exterior Electrical Power Distribution: 4 PDH

    This course provides an introduction to exterior electrical power distribution systems for buildings and related infrastructure. The information provided here can be utilized by electrical engineers in the development of the plans, specifications, and calculations, and can serve as the minimum electrical design requirements.Read MorePreview Course

    Interior Electrical Distribution Systems: 3 PDH

    This course provides an introduction to interior electrical distribution systems for buildings and related infrastructure. Topics covered in this course include transformers, service entrances, switchgear, switchboards, panelboards, motor controls and motor control centers. After completing this course you will have gained knowledge of circuitry and electrical equipment found in buildings and how to design an interior electrical distribution system for buildings.Read MorePreview Course

    Introduction to Electrical Design for Cathodic Protection Systems: 4 PDH

    This is an introduction to design and application of cathodic protection systems to mitigate corrosion in underground steel structures such as tanks and pipelines. Topics that will be covered in this course are the two principle methods used to mitigate corrosion, an introduction to the steps designing a sacrificial anode system and impressed current system and the field testing requirements needed for both of these systems.Read MorePreview Course

    Systems Failure Anatomy of a Blackout: 6 PDH

    This is an online course that gives detailed description of the electrical system blackout that happened August 14th, 2003. This was one of the largest blackouts in US history, that affected more than 150 million people. This course will cover the conditions prior to the start of the blackout sequence, conditions prior to the start of the blackout sequence, casual events leading to the power system cascade, and the cascading failure of the power system.Read MorePreview Course

    Photovoltaic Power Systems: 1 PDH

    In this online course you will learn what a photovoltaic (PV) power system is and the following as it pertains to the PV system: Circuit requirements, Disconnecting means, Wiring methods, Grounding, Marking, and Connections to other sources.Read MorePreview Course

    New York-Electrical Engineering Package: 36 PDH

    $189.00 Add to cart
    New York Approved Sponsor #166
    This package satisfies all 36 required hours of professional development.

    1. 1 hour professional ethics, ref. §68.14 c.1.
    2. 18 hours of live interactive courses, ref. ref. §68.14 c.3.
    3. 18 hours of distance education courses, ref. ref. §68.14 c.3.
    Fourteen live interactive webinars and five distance learning courses guaranteed to be accepted by the New York State Education Department-Professional Engineering and Land SurveyingInstructor: Juan Pesante, PE
    Package includes the following 14 live interactive courses:
    View Webinar Schedule

    Webinar: Design for Construction Safety: 1 PDH

    This course will provide engineers with information on how to recognize and anticipate construction hazards and how to eliminate them with well thought out design features. This course emphasizes permanent design features that eliminate or reduce the risk to hazards.Read More

    Webinar: Ethics for the Practicing Engineer: 1PDH

    In this introductory ethics course the engineer will understand why we study ethics as engineering professionals, ethical theories to use in our ethical decision making, and some tools to identify and resolve ethical conflicts.Read More

    Webinar: Emerging Technologies Connected Vehicles: 1PDH

    As this latest technology emerges, the engineer will learn about connected vehicles, the technologies, and the various public and private programs used for development and testing.Read More

    Webinar: 2023 NEC Significant Code Changes Part 1: 1 PDH

    Part 1 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC from the introduction up to Chapter 2 Article 230.Read More

    Webinar: 2023 NEC Significant Code Changes Part 2: 1 PDH

    Part 2 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC from Chapter 2 Article 230 up though all of Chapter 3.Read More

    Webinar: 2023 NEC Significant Code Changes Part 3: 1 PDH

    Part 3 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC for Chapters 4 and 5.Read More

    Webinar: 2023 NEC Significant Code Changes Part 4: 1 PDH

    Part 4 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC for Chapter 6.Read More

    Webinar: 2023 NEC Significant Code Changes Part 5: 1 PDH

    Part 5 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC for Chapters 7, 8, and 9.Read More

    Webinar: Administering the Construction Project : 2.5 PDH

    In this course we will review the management and administrative procedures that practitioners will need to guide construction projects from the pre-construction phase to project close out successfully. The course will benefit professional engineers serving as project managers or field representatives by presenting techniques that can be applied to the construction project to enhance operations, improve scheduling, mitigate issues, and help minimize and resolve claims or disputes.Read More

    Webinar: Infrastructure Planning: 2 PDH

    This course presents the main concepts of infrastructure planning in the public sector including the environmental, social, and institutional assessments and discusses many planning methodologies and approaches. The purpose of this course is to provide practitioners involved in planning public infrastructure projects with guidelines to be considered and applied in the planning process.Read More

    Webinar: Engineer’s Guide to Green Building: 1 PDH

    In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of the attributes of green building methods and products and the design and developing considerations for all building & home systems.Read More

    Webinar: Engineer’s Guide to Green Building-Part 2: 2 PDH

    In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of an in-depth examination of all green materials and methods for building green, and a comprehensive green building checklist to review before, during, and after any green build.Read More

    Webinar: Diesel Engine Fundamentals: 1.5 PDH

    This course provides the engineer the basic understanding of the operation and design of Diesel Engines. The student will learn in depth, the diesel engine operation including an overview of all basic components as well as the different cycles and the operation of all essential systems of modern day diesel engines.Read More

    Webinar: Storm Shelters & Safe Rooms: 1 PDH

    This course presents engineers with important information about the design and construction of community and residential safe rooms that will provide protection during tornado and hurricane events. The course will center around design guides FEMA P-320, P-361, and ICC 500.Read More

    Package includes the following five distance education courses:

    Exterior Electrical Power Distribution: 4 PDH

    This course provides an introduction to exterior electrical power distribution systems for buildings and related infrastructure. The information provided here can be utilized by electrical engineers in the development of the plans, specifications, and calculations, and can serve as the minimum electrical design requirements.Read MorePreview Course

    Interior Electrical Distribution Systems: 3 PDH

    This course provides an introduction to interior electrical distribution systems for buildings and related infrastructure. Topics covered in this course include transformers, service entrances, switchgear, switchboards, panelboards, motor controls and motor control centers. After completing this course you will have gained knowledge of circuitry and electrical equipment found in buildings and how to design an interior electrical distribution system for buildings.Read MorePreview Course

    Introduction to Electrical Design for Cathodic Protection Systems: 4 PDH

    This is an introduction to design and application of cathodic protection systems to mitigate corrosion in underground steel structures such as tanks and pipelines. Topics that will be covered in this course are the two principle methods used to mitigate corrosion, an introduction to the steps designing a sacrificial anode system and impressed current system and the field testing requirements needed for both of these systems.Read MorePreview Course

    Systems Failure Anatomy of a Blackout: 6 PDH

    This is an online course that gives detailed description of the electrical system blackout that happened August 14th, 2003. This was one of the largest blackouts in US history, that affected more than 150 million people. This course will cover the conditions prior to the start of the blackout sequence, conditions prior to the start of the blackout sequence, casual events leading to the power system cascade, and the cascading failure of the power system.Read MorePreview Course

    Photovoltaic Power Systems: 1 PDH

    In this online course you will learn what a photovoltaic (PV) power system is and the following as it pertains to the PV system: Circuit requirements, Disconnecting means, Wiring methods, Grounding, Marking, and Connections to other sources.Read MorePreview Course

  • Sale! Mechanical Engineering Courses
    New York Approved Sponsor #166
    Recent NYSED Update: Live webinars no longer mandatory per §68.14 c.3.
    This package satisfies all 36 required hours of professional development with

    1. 1 hour professional ethics, ref. §68.14 c.1.
    2. 36 hours of distance education courses, ref. §68.14 c.3.
    Eight Mechanical Engineering courses plus New York Laws, Rules & Ethics course that will earn 36 PDH guaranteed to be accepted by the New York State Education Department-Professional Engineering and Land SurveyingInstructor: Seth Grablow, PE

    New York – Laws, Rules, and Ethics for Professional Engineers: 3 PDH

    In this course the student will study the New York State Board for Engineering and Land Surveying Laws & Rules including Professional Engineering Ethics.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Boiler Basics-Operation and Maintenance: 5 PDH

    In this course the student will understand steam generation, boilers and boiler components, and basic concepts in their operation and maintenance.

    Coating Types and Characteristics of Metals: 3 PDH

    In this course the student will understand the characteristics and applications of various industrial coatings and metal finishes.

    Engineering Human Performance Optimization in the Workplace: 4 PDH

    In this course the student will understand the strategic approach for improving performance to reduce human error and manage controls so as to reduce unwanted events and/or mitigate their impact should they occur. The student will learn methods and techniques for catching and reducing errors and locating and eliminating latent organizational weaknesses.

    Fire Protection Systems: 3 PDH

    In this course the student will understand fire protection systems and fire protection system operations and will be able to familiarize themselves with the various systems and components including operations and maintenance/ inspection procedures.

    Improving Motor and Drive System Performance: 5 PDH

    This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.

    Installation, Maintenance, and Repair of Water and Sewage Systems: 5 PDH

    In this course the student will understand a facility’s water and sewage systems and associated common components as well as basic concepts in installing, maintaining, repairing and the operation and maintenance of these systems.

    Principles of Hydraulic and Pneumatic Systems: 4 PDH

    In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.

    New York-Mechanical Engineering Package #2: 36 PDH

    $108.00 Add to cart
    New York Approved Sponsor #166
    Recent NYSED Update: Live webinars no longer mandatory per §68.14 c.3.
    This package satisfies all 36 required hours of professional development with

    1. 1 hour professional ethics, ref. §68.14 c.1.
    2. 36 hours of distance education courses, ref. §68.14 c.3.
    Eight Mechanical Engineering courses plus New York Laws, Rules & Ethics course that will earn 36 PDH guaranteed to be accepted by the New York State Education Department-Professional Engineering and Land SurveyingInstructor: Seth Grablow, PE

    New York – Laws, Rules, and Ethics for Professional Engineers: 3 PDH

    In this course the student will study the New York State Board for Engineering and Land Surveying Laws & Rules including Professional Engineering Ethics.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Boiler Basics-Operation and Maintenance: 5 PDH

    In this course the student will understand steam generation, boilers and boiler components, and basic concepts in their operation and maintenance.

    Coating Types and Characteristics of Metals: 3 PDH

    In this course the student will understand the characteristics and applications of various industrial coatings and metal finishes.

    Engineering Human Performance Optimization in the Workplace: 4 PDH

    In this course the student will understand the strategic approach for improving performance to reduce human error and manage controls so as to reduce unwanted events and/or mitigate their impact should they occur. The student will learn methods and techniques for catching and reducing errors and locating and eliminating latent organizational weaknesses.

    Fire Protection Systems: 3 PDH

    In this course the student will understand fire protection systems and fire protection system operations and will be able to familiarize themselves with the various systems and components including operations and maintenance/ inspection procedures.

    Improving Motor and Drive System Performance: 5 PDH

    This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.

    Installation, Maintenance, and Repair of Water and Sewage Systems: 5 PDH

    In this course the student will understand a facility’s water and sewage systems and associated common components as well as basic concepts in installing, maintaining, repairing and the operation and maintenance of these systems.

    Principles of Hydraulic and Pneumatic Systems: 4 PDH

    In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.

  • Sale!
    New York Approved Sponsor #166
    This package satisfies all 36 required hours of professional development.

    1. 1 hour professional ethics, ref. §68.14 c.1.
    2. 18 hours of live interactive courses, ref. ref. §68.14 c.3.
    3. 18 hours of distance education courses, ref. ref. §68.14 c.3.
    Thirteen live interactive webinars and five distance learning courses guaranteed to be accepted by the New York State Education Department-Professional Engineering and Land SurveyingInstructor: Seth Grablow, PE
    Package includes the following 13 live interactive courses:
    View Webinar Schedule

    Webinar: Design for Construction Safety: 1 PDH

    This course will provide engineers with information on how to recognize and anticipate construction hazards and how to eliminate them with well thought out design features. This course emphasizes permanent design features that eliminate or reduce the risk to hazards.Read More

    Webinar: Ethics for the Practicing Engineer: 1 PDH

    In this introductory ethics course the engineer will understand why we study ethics as engineering professionals, ethical theories to use in our ethical decision making, and some tools to identify and resolve ethical conflicts.Read More

    Webinar: Administering the Construction Project: 2.5 PDH

    In this course we will review the management and administrative procedures that practitioners will need to guide construction projects from the pre-construction phase to project close out successfully. The course will benefit professional engineers serving as project managers or field representatives by presenting techniques that can be applied to the construction project to enhance operations, improve scheduling, mitigate issues, and help minimize and resolve claims or disputes.Read More

    Webinar: Infrastructure Planning: 2 PDH

    This course presents the main concepts of infrastructure planning in the public sector including the environmental, social, and institutional assessments and discusses many planning methodologies and approaches. The purpose of this course is to provide practitioners involved in planning public infrastructure projects with guidelines to be considered and applied in the planning process.Read More

    Webinar: Introduction to Mechanical Components: 1.5 PDH

    Along with pumps and valves, reviewed in separate PDH courses, there are many other components that can be found in an industrial/power generation setting. Knowledge of these systems can be useful to any engineer. This online course provides a brief overview of air compressors, hydraulics, boilers, cooling towers, and other components likely to be installed in an industrial or power generation facility.Read More

    Webinar: Modern Heat Pumps: 1 PDH

    In this course the engineer will be introduced to modern heat pumps and their applications. This introductory course will enable the students to understand the basics of the latest heat pump technologies and how to apply to multiple applications.Read More

    Webinar: Diesel Engine Fundamentals: 1.5 PDH

    This course provides the engineer the basic understanding of the operation and design of Diesel Engines. The student will learn in depth, the diesel engine operation including an overview of all basic components as well as the different cycles and the operation of all essential systems of modern day diesel engines.Read More

    Webinar: Fasteners: 1.5 PDH

    This course presents an in-depth look at steel fasteners with focus on structural fasteners, since they are a critical part of most steel structures. A broad range of topics will be discussed including fastener strength, selection criteria, available coatings and testing. This course will go beyond the standards and specifications and provide engineers with helpful background information and practical strategies to mitigate fastener issues and keep projects trouble free.Read More

    Webinar: Engineer’s Guide to Green Building: 1 PDH

    In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of the attributes of green building methods and products and the design and developing considerations for all building & home systems.Read More

    Webinar: Engineer’s Guide to Green Building-Part 2: 2 PDH

    In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of an in-depth examination of all green materials and methods for building green, and a comprehensive green building checklist to review before, during, and after any green build.Read More

    Webinar: Storm Shelters & Safe Rooms: 1 PDH

    This course presents engineers with important information about the design and construction of community and residential safe rooms that will provide protection during tornado and hurricane events. The course will center around design guides FEMA P-320, P-361, and ICC 500.Read More

    Webinar: 2023 NEC Significant Code Changes Part 1: 1 PDH

    Part 1 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC from the introduction up to Chapter 2 Article 230.Read More

    Webinar: 2023 NEC Significant Code Changes Part 2: 1 PDH

    Part 2 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC from Chapter 2 Article 230 up though all of Chapter 3.Read MoreRead More[/button]

    Package includes the following five distance education courses:

    Building Envelope Impact on HVAC Energy Use: 3 PDH

    How airtight are the buildings you are responsible for? What is the energy load and indoor air quality like in your buildings? The only way to know is to perform a study. Despite common assumptions, measurements have shown that typical U.S. commercial buildings are not particularly airtight. In this course we present a recent simulation study on the impact of improving envelope airtightness in U.S. commercial buildings. You get documented, verifiable facts, report charts and graphs illustrating the findings, and a discussion from the report on the results of the study, Investigation of the Impact of Commercial Building Envelope Airtightness on HVAC Energy Use.Read MorePreview Course

    Chillers, Refrigerant Compressors, and Heating Systems: 5 PDH

    This course focuses on the equipment and equipment components used to generate heating and cooling. It does not include fans and pumps. This distinction is clear for most equipment types, such as unit heaters, boilers, and chillers. However, for packaged air-conditioning (AC) equipment the distinction can be subtle. Most packaged AC equipment is treated as a unit by performance rating procedures. Hence, separation of the fans is difficult. For this study, only the refrigerant compressors of packaged equipment are considered. Read MorePreview Course

    Design of Small Water Systems: 3 PDH

    This course focuses on criteria for water source development, design of small water supply, treatment, and distribution systems. This professional engineer online course is from the U.S. Army Corps of Engineers manual on the Design of Small Water Systems. This manual provides information of interest to planners and designers of small water systems. The major emphasis of this course is on the design of systems that will be effective and reliable, requiring a level of operation and management activity commensurate with their physical size and the available sources.Read MorePreview Course

    Fundamentals of Gas Turbine Engines: 5 PDH

    This course provides an overview of the development of gas turbines, operational theory, Brayton cycle, conditions and design limitations that affect performance, types of turbine engines and components utilized in a gas turbine engine.Read MorePreview Course

    Water Cooled Air Conditioning Systems Part 1: 2 PDH

    In this course the student will understand the requirements and best practices for the design, installation and commissioning of cooling tower systems of water cooled air conditioning systems.Read MorePreview Course

    New York-Mechanical Engineering Package: 36 PDH

    $189.00 Add to cart
    New York Approved Sponsor #166
    This package satisfies all 36 required hours of professional development.

    1. 1 hour professional ethics, ref. §68.14 c.1.
    2. 18 hours of live interactive courses, ref. ref. §68.14 c.3.
    3. 18 hours of distance education courses, ref. ref. §68.14 c.3.
    Thirteen live interactive webinars and five distance learning courses guaranteed to be accepted by the New York State Education Department-Professional Engineering and Land SurveyingInstructor: Seth Grablow, PE
    Package includes the following 13 live interactive courses:
    View Webinar Schedule

    Webinar: Design for Construction Safety: 1 PDH

    This course will provide engineers with information on how to recognize and anticipate construction hazards and how to eliminate them with well thought out design features. This course emphasizes permanent design features that eliminate or reduce the risk to hazards.Read More

    Webinar: Ethics for the Practicing Engineer: 1 PDH

    In this introductory ethics course the engineer will understand why we study ethics as engineering professionals, ethical theories to use in our ethical decision making, and some tools to identify and resolve ethical conflicts.Read More

    Webinar: Administering the Construction Project: 2.5 PDH

    In this course we will review the management and administrative procedures that practitioners will need to guide construction projects from the pre-construction phase to project close out successfully. The course will benefit professional engineers serving as project managers or field representatives by presenting techniques that can be applied to the construction project to enhance operations, improve scheduling, mitigate issues, and help minimize and resolve claims or disputes.Read More

    Webinar: Infrastructure Planning: 2 PDH

    This course presents the main concepts of infrastructure planning in the public sector including the environmental, social, and institutional assessments and discusses many planning methodologies and approaches. The purpose of this course is to provide practitioners involved in planning public infrastructure projects with guidelines to be considered and applied in the planning process.Read More

    Webinar: Introduction to Mechanical Components: 1.5 PDH

    Along with pumps and valves, reviewed in separate PDH courses, there are many other components that can be found in an industrial/power generation setting. Knowledge of these systems can be useful to any engineer. This online course provides a brief overview of air compressors, hydraulics, boilers, cooling towers, and other components likely to be installed in an industrial or power generation facility.Read More

    Webinar: Modern Heat Pumps: 1 PDH

    In this course the engineer will be introduced to modern heat pumps and their applications. This introductory course will enable the students to understand the basics of the latest heat pump technologies and how to apply to multiple applications.Read More

    Webinar: Diesel Engine Fundamentals: 1.5 PDH

    This course provides the engineer the basic understanding of the operation and design of Diesel Engines. The student will learn in depth, the diesel engine operation including an overview of all basic components as well as the different cycles and the operation of all essential systems of modern day diesel engines.Read More

    Webinar: Fasteners: 1.5 PDH

    This course presents an in-depth look at steel fasteners with focus on structural fasteners, since they are a critical part of most steel structures. A broad range of topics will be discussed including fastener strength, selection criteria, available coatings and testing. This course will go beyond the standards and specifications and provide engineers with helpful background information and practical strategies to mitigate fastener issues and keep projects trouble free.Read More

    Webinar: Engineer’s Guide to Green Building: 1 PDH

    In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of the attributes of green building methods and products and the design and developing considerations for all building & home systems.Read More

    Webinar: Engineer’s Guide to Green Building-Part 2: 2 PDH

    In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of an in-depth examination of all green materials and methods for building green, and a comprehensive green building checklist to review before, during, and after any green build.Read More

    Webinar: Storm Shelters & Safe Rooms: 1 PDH

    This course presents engineers with important information about the design and construction of community and residential safe rooms that will provide protection during tornado and hurricane events. The course will center around design guides FEMA P-320, P-361, and ICC 500.Read More

    Webinar: 2023 NEC Significant Code Changes Part 1: 1 PDH

    Part 1 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC from the introduction up to Chapter 2 Article 230.Read More

    Webinar: 2023 NEC Significant Code Changes Part 2: 1 PDH

    Part 2 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC from Chapter 2 Article 230 up though all of Chapter 3.Read MoreRead More[/button]

    Package includes the following five distance education courses:

    Building Envelope Impact on HVAC Energy Use: 3 PDH

    How airtight are the buildings you are responsible for? What is the energy load and indoor air quality like in your buildings? The only way to know is to perform a study. Despite common assumptions, measurements have shown that typical U.S. commercial buildings are not particularly airtight. In this course we present a recent simulation study on the impact of improving envelope airtightness in U.S. commercial buildings. You get documented, verifiable facts, report charts and graphs illustrating the findings, and a discussion from the report on the results of the study, Investigation of the Impact of Commercial Building Envelope Airtightness on HVAC Energy Use.Read MorePreview Course

    Chillers, Refrigerant Compressors, and Heating Systems: 5 PDH

    This course focuses on the equipment and equipment components used to generate heating and cooling. It does not include fans and pumps. This distinction is clear for most equipment types, such as unit heaters, boilers, and chillers. However, for packaged air-conditioning (AC) equipment the distinction can be subtle. Most packaged AC equipment is treated as a unit by performance rating procedures. Hence, separation of the fans is difficult. For this study, only the refrigerant compressors of packaged equipment are considered. Read MorePreview Course

    Design of Small Water Systems: 3 PDH

    This course focuses on criteria for water source development, design of small water supply, treatment, and distribution systems. This professional engineer online course is from the U.S. Army Corps of Engineers manual on the Design of Small Water Systems. This manual provides information of interest to planners and designers of small water systems. The major emphasis of this course is on the design of systems that will be effective and reliable, requiring a level of operation and management activity commensurate with their physical size and the available sources.Read MorePreview Course

    Fundamentals of Gas Turbine Engines: 5 PDH

    This course provides an overview of the development of gas turbines, operational theory, Brayton cycle, conditions and design limitations that affect performance, types of turbine engines and components utilized in a gas turbine engine.Read MorePreview Course

    Water Cooled Air Conditioning Systems Part 1: 2 PDH

    In this course the student will understand the requirements and best practices for the design, installation and commissioning of cooling tower systems of water cooled air conditioning systems.Read MorePreview Course

State Approvals

All of our online courses comply with the Continuing Professional Competency Guidelines published by the National Council of Examiners for Engineering and Surveying (NCEES) and the International Association for Continuing Education & Training (IACEP), therefore, shall be acceptable to all the state boards requiring mandatory continuing education.
EZ-pdh.com approved provider map of USA for professional engineersKey
Approved Providers Mandatory

This column lists states which require continuing education (CE) be completed with a state approved provider. We are approved in all of the seven states requiring pre-approval. “Click to Verify” button will transfer you to the State Board website listing approved providers. We are listed under Ezekiel Enterprises, LLC or EZpdh.com with POC: Raymond Bosek

Florida:
Approved Provider Number:0006346
(listed as Ezekiel Enterprises, LLC)Click to VerifyArchitecture and Interior Design Approved Provider Number:PVD433(listed as Ezekiel Enterprises, LLC)
Click to Verify
Indiana:
CE Approved Provider CE21800049(listed as Ezekiel Enterprises, LLC)
Click to Verify
Louisiana:
CPD Approved Provider CPD.0000317(listed as Ezekiel Enterprises, LLC)
Click to VerifyMaryland:
Approved Provider(listed as EZpdh.com)
Click to VerifyNew Jersey:
Approved CPC Provider 24GP00009900(listed as EZpdh.com)
Click to VerifyNew York:
NYSED Approved Sponsor #166(listed as Ezekiel Enterprises, LLC)
Click to VerifyNorth Carolina:
Approved Sponsor Number:S-0650(listed as Ezekiel Enterprises, LLC)
Click to Verify

Not Mandatory

This column lists states which DO NOT require continuing education (CE) to be completed with a state approved provider. States transfer responsibility to engineer to determine if the CE is acceptable and the state reserves the right to disallow hours if they determined hours are unacceptable. We recommend to complete CE with only state pre-approved providers

Alabama
Alaska
Arkansas
Delaware
Georgia
Idaho
Illinois
Iowa
Kansas
Kentucky
Maine
Maryland
Michigan
Minnesota
Mississippi
Missouri
Montana
Nebraska
Nevada
New Hampshire
New Mexico
North Dakota
Ohio
Oklahoma
Oregon
Pennsylvania
South Carolina
South Dakota
Tennessee
Texas
Utah
Vermont
Virginia
West Virginia
Wisconsin
Wyoming

Read More about State ApprovalsAre you a Land Surveyor? – Click Here for State Approvals

Scroll to Top