Sale!

Maine-Land Surveyors Package: 30 PDH

$90.00

Eight Land Surveying courses courses that will earn 30 PDH guaranteed to be accepted by the Maine State Board of Licensure for Professional Engineers.
Instructor: Raymond Bosek, PE

Land Surveyor’s Ethics: 2 PDH

In this ethics course the student will understand the standards of professional behavior for adherence to the highest ethical conduct and revisit the emphasis that the holder of a professional license has a direct and vital impact on the safety, health, and welfare of the public.

Public Land Survey Rectangular System: 8 PDH

In this course the student will review the rectangular surveying system which has been used continuously in the United States since 1785. As all facets of this system occasionally come into use, the student will become well versed in the field procedures of conducting an original survey covering both historical and current methods.

Aerial Photogrammetry: 5 PDH

In this course the student will understand procedural guidance, technical specifications, and quality control (QC) criteria for performing aerial photogrammetric mapping activities.

Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors: 4 PDH

This course is an introduction of using sUAS in land surveying. From FAA licensing requirements to common sUAS products and software, with an understanding of these basics a land surveyor can easily get started in using this up and coming technology.

Airborne Topographic LiDAR: 3 PDH

In this course the student will review the principles of Airborne Topographic LiDAR and learn how to utilize methods to employ this technology in the field.

Construction Surveying Curves: 3 PDH

In this course the student will learns to locate points using angles and distances for establishing curves. An essential tool in construction surveying when determining the line of a curve for road layout or some other type of curved construction.

Description of Lands: 3 PDH

This course provides guidance for documenting accurate boundary descriptions and locations by survey in the standards followed for Executive and public land orders and proclamations.

Corner Restoration Fundamentals: 2 PDH

In this course the student will understand the understand federal guidelines of resurveying corner monuments and the procedures and laws to successfully reestablish these boundaries.


Preview Course: Land Surveyor’s Ethics
Preview Course: Public Land Survey: Rectangular System
Preview Course: Aerial Photogrammetry
Preview Course: Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors
Preview Course: Airborne Topographic LiDAR
Preview Course: Construction Surveying Curves
Preview Course: Description of Lands
Preview Course: Corner Restoration Fundamentals
SKU: MELS-22 Categories: , , ,

Related courses

  • Sale! Civil Engineering Courses

    New Jersey-Civil Engineering Package #2: 26 PDH

     $80.00 Add to cart
    New Jersey CPC Approved Provider 24GP00009900
    This course satisfies the 2 required hours of professional practice ethics, ref. § 13:40-13.1
    Four Civil Engineering courses plus New Jersey Statutes, Regulations, & Ethics course that will earn 26 PDH guaranteed to be accepted by the New Jersey State Board of Professional Engineers and Land SurveyorsInstructor: Raymond Bosek, PE

    New Jersey – Ethics, Statutes, and Regulations for Professional Engineers: 4 PDH

    In this course the student will study two ethics courses including the New Jersey State Board of Professional Engineers and Land Surveyors Statutes and Regulations.

    Advanced Fabricated Building: 6 PDH

    In this course the student will understand the building requirements of manufactured structures, particularly residential homes in Florida, as well as understand the various fabrication materials used for other advanced building projects.

    Durability by Design: 5 PDH

    In this course the student will receive guidance on designing durable homes for today’s housing industry, addressing critical topics, including water vapor management, envelope design, and natural hazards.

    Prescriptive Method for Structural Insulated Panels (SIPs) in Construction: 3 PDH

    In this course the student will learn prescriptive requirements to facilitate the use of Structural Insulated Panels (SIPs) in wall systems for the construction of one- and two-family dwellings.

    Preview Course: New Jersey Statutes, Regulations and Ethics
    Preview Course: Engineer’s Guide to Corrosion
    Preview Course: Advanced Fabricated Building
    Preview Course: Durability by Design
    Preview Course: Prescriptive Method for Structural Insulated Panels
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Sale! Civil Engineering Courses

    Missouri-Civil Engineering Package: 30 PDH

     $90.00 Add to cart
    Six Civil Engineering courses plus Missouri Statutes, Rules, & Ethics course that will earn 30 PDH guaranteed to be accepted by the Missouri Board for Architects, Professional Engineers, Professional Land Surveyors, and Landscape Architects Instructor: Raymond Bosek, PE

    Missouri – Rules, Statutes, & Ethics for Professional Engineers: 3 PDH

    Preview Course: Missouri Statutes, Codes, and Ethics
    In this course the student will study the Missouri Board for Architects, Professional Engineers, Professional Land Surveyors, and Landscape Architects Rules and Statutes including Ethics.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • The engineer’s guidelines for practicing within Missouri’s rules and statutes
      • The engineer’s duty to protect the public
      • The engineer’s duty to make objective and truthful statements
      • The engineer’s duty to limit practice to his or her field of competence
      • The engineer’s duty to maintain client confidentiality
      • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Pavement Design for Roads, Streets, Walks, and Open Storage Areas: 6 PDH

    Preview Course: Pavement Design
    This course provides guidance for design of pavements and supporting materials for roads, streets, walks and open storage areas. The contents include procedures for conducting preliminary site reconnaissance, traffic analyses, and criteria for the design of subgrade, subbase, base courses, flexible and rigid pavements.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Preliminary Soil Investigations
      • Vehicular Traffic Considerations
      • Flexible Pavement Materials & Subgrades
      • Bituminous Pavement
      • Flexible Pavement Design
      • Rigid Pavement Design
      • Concrete Pavement Design
      • Reinforced Concrete Pavements
      • Pavement Overlays
      • Joints For Plain & Reinforced Concrete
      • Roller-Compacted Concrete Pavements
      • Seasonal Frost Conditions

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

    Foundations in Expansive Soils: 6 PDH

    Preview Course: Foundations
    This course presents guidance and information for the geotechnical investigation necessary for the selection and design of foundations for heavy and light buildings constructed in expansive clay soil areas. The information in this course is generally applicable to many types of structures such as residences, warehouses, and multi-story buildings. Emphasis is given to the maintenance of an environment that encourages constant moisture conditions in the foundation soils during and following construction. Special attention must always be given to specific requirements of the structure such as limitations on allowable differential movement.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Guidelines of the geotechnical investigation and analysis
      • Field exploration
      • Laboratory investigations
      • Methodology for prediction of volume changes
      • Selection of the type of foundation
      • Structural details of design procedures provided for reference
      • Methods of minimizing foundation movement
      • Construction techniques and inspection Remedial repair of damaged structures

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

    Home Builders Guide to Earthquake Resistant Building Design: 5 PDH

    Preview Course: Homebuilders Guide
    In this course, the student will review Chapters 1-4 from “Homebuilders Guide to Earthquake Resistant Design and Construction”, FEMA 232 – June 2006 prepared by the Building Seismic Safety Council for the Federal Emergency Management Agency of the Department of Homeland Security.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Background & History
      • Above-Code Recommendations
      • International Residential Code & IRC Seismic Design Categories
      • Building Response & Concepts Concerning Site
      • Other Hazards including Coastal Hazards
      • Earthquake Resistant Requirements
      • IRC General Earthquake Limitations
      • Load Path
      • Lateral Capacities
      • House Configuration Irregularities
      • Foundation Requirements including Concrete Foundations & Masonry Foundations
      • Special Soil Conditions
      • Foundation Resistance to Sliding Loads
      • Special Considerations for Cut & Fill Sites
      • Foundation Design and Reinforcement
      • Interior Braced Walls Anchoring
      • Floor Design & Construction including Wood Frame, Cantilevered & Concrete Slab-On-Grade
      • Requirements for Blocking
      • Floor Sheathing

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 5 professional development hours (PDH) of continuing education.

    Conduits, Culverts, and Pipes Part I: 4 PDH

    Preview Course: Conduits I & II
    Part I of a two-part series. This course provides guidance on the design and construction of conduits, culverts, and pipes, and the design procedures for trench/embankment earth loadings, highway loadings, railroad loadings, surface concentrated loadings, internal/external fluid pressures, cast-in-place conduits for dams, circular reinforced concrete pipe for small dams and levees, and corrugated metal pipe for rural levees and culverts.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Material selection
      • Installation methods
      • Loadings
      • Method of analysis
      • Joints & camber
      • Life cycle design

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Conduits, Culverts, and Pipes Part II: 4 PDH

    Preview Course: Conduits I & II
    Part II of a two-part series. This course provides guidance on the design and construction of conduits, culverts, and pipes, and the design procedures for trench/embankment earth loadings, highway loadings, railroad loadings, surface concentrated loadings, internal/external fluid pressures, cast-in-place conduits for dams, circular reinforced concrete pipe for small dams and levees, and corrugated metal pipe for rural levees and culverts.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Material selection
      • Installation methods
      • Loadings
      • Method of analysis
      • Joints & camber
      • Life cycle design

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Deterioration of Concrete: 2 PDH

    Preview Course: Deterioration of Concrete
    In this course, the student will review Chapter 3, Causes of Distress and Deterioration of Concrete from Engineer Manual (EM) 1110-2-2002, “Engineering and Design – Evaluation and Repair of Concrete Structures” published by the U.S. Army Corp of Engineers (issued 30 June 1995). This course is most relevant to engineers wishing to attain knowledge on the most common causes of problems in concrete. The course also provides a brief description of the basic mechanism of each common problem, a description of the typical symptoms that would be observed during a visual inspection, and suggests preventative methods or techniques to prevent further damage.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Common causes of concrete deterioration
      • Symptoms of concrete distress and deterioration that can be found during visual inspections
      • Preventative measures to reduce or eliminate further concrete degradation.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Missouri

    Continuing Professional Competency (CPC) Requirements

    Continuing Education or PDH is known as CPC in Missouri
    Missouri professional engineers are required to earn 30 PDH biennially. All of the required hours can be earned through online continuing education courses. EZpdh.com courses are accepted by the Missouri Board for Architects, Professional Engineers, Professional Land Surveyors, and Landscape Architects. The following table shows a quick rundown of license renewal requirements.

    SubjectRequirement
    Hours Required30 hours biennially
    Renewal DatesDecember 31 based on year of licensure
    Course ApprovalThe Board does not require pre-approval for providers or specific courses. Each engineer must determine whether an activity meets the Board’s requirements
    Course ContentMissouri defines the purpose of its continuing education requirement as “to reinforce the need for lifelong learning in order to stay current with changing technology, equipment, procedures, processes, tools and established standards.” Qualifying activities must have a clear purpose and objective which will maintain, improve, or expand the skills and knowledge relevant to the licensee’s field of practice. The licensee is given flexibility in selecting among a broad range of subjects that are intended to strengthen or maintain competency in technical, managerial (business), or ethical fields
    Online CoursesThe board specifically lists internet-based courses as acceptable providing a quiz is used to show evidence of achievement
    PDH CarryoverA maximum of 15 PDH may be carried forward into the next renewal period
    Additional
    1. PDH completion records must be maintained for a minimum of 4 years. EZpdh.com helps you meet this requirement by providing you with the ability to instantly access and print a certificate upon successful completion of a course. Additionally, your certificates of completion are securely maintained by EZpdh.com for a minimum of seven years and can be accessed online through your login account
    State WebsiteAccess State Website

    Preview Course: Missouri Statutes, Codes, and Ethics
    Preview Course: Pavement Design
    Preview Course: Foundations
    Preview Course: Homebuilders Guide
    Preview Course: Conduits I & II
    Preview Course: Conduits I & II
    Preview Course: Deterioration of Concrete
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
Scroll to Top