Mississippi-Chemical Engineering Package: 15 PDH
$90.00 $60.00
Mississippi – Laws, Rules, & Ethics for Professional Engineers: 3 PDH
In this course the student will study the Mississippi Board of Licensure for Professional Engineers and Surveyors Laws and Rules including Ethics.
Process Design for Conversion of Biomass to Biofuels: 4 PDH
In this course you the student will understand the motivation, process, design, and cost of converting biomass into biofuel. The focus of this course is to find a plausible pathway to convert algal carbohydrates and lipids to fuel and to minimize cost during production.
Carbon Absorption of Volatile Organic Compounds: 3 PDH
Carbon adsorption is used in air pollution control to remove volatile organic compounds (VOCs) from low to medium concentration gas streams, when stringent outlet concentration must be met and/or recovery of the VOC is desired. This course covers the types of adsorbers, adsorption theory, and design procedures for carbon adsorption equipment.
Deterioration of Concrete: 2 PDH
This course is most relevant to engineers wishing to attain knowledge on the most common causes of problems in concrete. The course also provides a brief description of the basic mechanism of each common problem, a description of the typical symptoms that would be observed during a visual inspection, and suggests preventative methods or techniques to prevent further damage.
Hazardous Waste Identification: 2 PDH
This course covers hazardous waste regulated by the EPA under the Resource Conservation and Recovery Act (RCRA), starting with determining whether what waste is considered a solid waste according to the RCRA regulations and moving on to determining if it fits one of the RCRA requirements for being a hazardous waste.
Wastewater Treatment Plants: 1 PDH
Package plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.
Preview Course: Mississippi Laws, Rules and Ethics
Preview Course: Process Design for Conversion of Biomass to Biofuels
Preview Course: Carbon Absorption of Volatile Organic Compounds
Preview Course: Deterioration of Concrete
Preview Course: Hazardous Waste Identification
Preview Course: Wastewater Treatment Plants
Related Courses
- Sale!
Florida-Electrical Engineering Package: 18 CEH
$120.00$80.00 Add to cartFive Electrical Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 CEH guaranteed to be accepted by the Florida Board of Professional EngineersInstructor: Juan Pesante, PEPackage contains all required hours for 2021 renewal- Florida Laws & Rules (Course #0010038)
- Florida Ethics (Course #0010038)
- Remaining hours in Area of Practice
Florida 2021 Renewal – Laws & Rules for Professional Engineers: 1 CEH
Preview Course: Florida Laws and Rules
- Florida Approved Course #0010038
- Approved Course for February 28, 2021 Renewal Deadline
- This course satisfies the one (1) hour laws and rules requirement
In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapters 455 and 471, 3) Case Law Concerning Chapters 455 and 471, and 4) Disciplinary Cases Review.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- The engineer's guidelines for practicing within Florida's laws and rules
- Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium
- Florida Statutes: Changes to Chapters 455 and 471
- Case Law Concerning Chapters 455 and 471
- Disciplinary Cases Review
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).
Florida 2021 Renewal – Ethics for Professional Engineers: 1 CEH
Preview Course: Florida Ethics
- Florida Approved Course #0010039
- Approved Course for February 28, 2021 Renewal Deadline
- This course satisfies the one (1) hour ethics requirement
The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- The engineer’s duty to protect the public
- The engineer’s duty to make objective and truthful statements
- The engineer’s duty to limit practice to his or her field of competence
- The engineer’s duty to maintain client confidentiality
- The engineer’s responsibility to the profession
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).
Systems Failure Anatomy of a Blackout: 6 PDH
Preview Course: Systems Failure Anatomy of a Blackout
- Florida Approved Area of Practice Course #0009697
This is an online course that gives detailed description of the electrical system blackout that happened August 14th, 2003. This was one of the largest blackouts in US history, that affected more than 150 million people. This course will cover the conditions prior to the start of the blackout sequence, conditions prior to the start of the blackout sequence, casual events leading to the power system cascade, and the cascading failure of the power system.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Know what happened, why it happened, and what can be done to minimize future outages
- Learn about power system operations, the planning, design, protection and control
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 continuing education hours (CEH).
Exterior Electrical Power Distribution: 4 PDH
Preview Course: Exterior Electrical Power Distribution
- Florida Approved Area of Practice Course #0009695
This course provides an introduction to exterior electrical power distribution systems for buildings and related infrastructure. The information provided here can be utilized by electrical engineers in the development of the plans, specifications, and calculations, and can serve as the minimum electrical design requirements. It is applicable to the traditional electrical services customary for Design-Bid-Build construction contracts and for Design-Build construction contracts. Project conditions may dictate the need for a design that exceeds these minimum requirements. The design criteria and standards contained within are the minimum requirements acceptable for installations for efficiency, economy, durability, maintainability, and reliability of electrical power supply and distribution systems. The criteria and standards herein are not intended to be retroactively mandatory. After completing this course you will have gained knowledge of circuitry and electrical equipment found to power buildings and how to design an exterior electrical distribution systems for buildings.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Learn guidelines for selection of primary voltage
- Learn about main electric supply station
- Learn how design utilization electric supply stations differ from main electric supply stations
- Learn about primary unit substations to distribute underground medium voltage circuits
- Learn design criteria for secondary unit substations
- Learn guidelines for design and installation of pad-mounted transformers
- Learn about medium voltage switchgear
- Learn about application of pad-mounted sectionalizing termination cabinets
- Learn application and limitation guidelines for power factor correction or to minimize line losses
- Learn “best practices” for exterior electric power distribution
- Learn criteria for overhead power distribution lines
- Learn about the advantages and disadvantages of copper versus aluminum conductors for exterior electrical power distribution
- Learn when and where to apply surge arrestors
- Learn the fundamentals of fuse protection
- Learn about underground electrical distribution systems.
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 continuing education hours.
Interior Electrical Distribution Systems: 3 PDH
Preview Course: Interior Electrical Distribution Systems
- Florida Approved Area of Practice Course #0009701
This course provides an introduction to interior electrical distribution systems for buildings and related infrastructure. Topics covered in this course include transformers, service entrances, switchgear, switchboards, panelboards, motor controls and motor control centers. After completing this course you will have gained knowledge of circuitry and electrical equipment found in buildings and how to design an interior electrical distribution system for buildings.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Learn how to select and specify transformers
- Have knowledge of service entrance requirements and learn about switchgear and switchboards
- Know the basic considerations when employing panelboards
- Know the requirments for motor control centers
- Know the fundamentals of motor controls and motor control circuites
- Know when to employ surge protection devices
- Understand Raceways and wiring devices
- Learn about emergency engine generator sets
- What is automatic transfer equipment
- Learn how to employ stationary batteries and battery chargers
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 continuing education hours (CEH).
A Guide to Offshore Wind Energy: 2 CEH
Preview Course: Offshore Wind Energy
- Florida Approved Area of Practice Course #0009701
This course introduces the basic principles of proposed US offshore wind facilities. The course summarizes a study conducted by EESI of existing European and Asian offshore wind farms. The topics addressed include technical issues related to marine foundations and structures, transmission issues unique to offshore power generation, political and regulatory issues and the publics perceptions of proposed offshore wind farms. This course demonstrates that offshore wind energy has been successfully implemented in other parts of the world and that the potential for wind farms in U.S. waters is favorable.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Awareness of the basic principles of Offshore Wind Energy
- Awareness of the geographic areas in the U.S. that are candidates for wind farms
- Learn the affects of wind farms on commercial fishing and birds
- Public concerns about offshore wind farms relating to property values, local economy and jobs
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 continuing education hours (CEH).
Photovoltaic Power Systems: 1 PDH
Preview Course: Photovoltaic Power Systems
- Florida Approved Area of Practice Course #0009700
In this online course you will learn what a photovoltaic (PV) power system is and the following as it pertains to the PV system: Circuit requirements, Disconnecting means, Wiring methods, Grounding, Marking, and Connections to other sources.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Understand the various components and terminologies associated with photovoltaic systems
- Learn photovoltaic system’s circuit requirements and installation guidelines including wiring methods/li>
- Discuss grounding methods as well as standard markings of photovoltaic system components/li>
- Identify standard methods to connect to other power systems and loads/li>
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one continuing education hour (CEH).
Preview Course: Florida Laws and Rules
Preview Course: Florida Ethics
Preview Course: Systems Failure Anatomy of a Blackout
Preview Course: Exterior Electrical Power Distribution
Preview Course: Interior Electrical Distribution Systems
Preview Course: Offshore Wind EnergyPreview Course: Photovoltaic Power SystemsSelect “Preview Course” to view prior to purchaseSelect “Add to Cart” to purchase - Sale!
Florida-Civil Engineering Package #2: 18 CEH
$120.00$80.00 Add to cartThree Civil Engineering courses plus Florida Laws & Rules, Florida Ethics, that will earn 18 CEH guaranteed to be accepted by the Florida Board of Professional EngineersInstructor: Raymond Bosek, PEPackage contains all required hours for 2021 renewal- Florida Laws & Rules (Course #0010038)
- Florida Ethics (Course #0010038)
- Remaining hours in Area of Practice
Florida 2021 Renewal – Laws & Rules for Professional Engineers: 1 CEH
Preview Course: Florida Laws and Rules
- Florida Approved Course #0010038
- Approved Course for February 28, 2021 Renewal Deadline
- This course satisfies the one (1) hour laws and rules requirement
In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapters 455 and 471, 3) Case Law Concerning Chapters 455 and 471, and 4) Disciplinary Cases Review.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- The engineer's guidelines for practicing within Florida's laws and rules
- Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium
- Florida Statutes: Changes to Chapters 455 and 471
- Case Law Concerning Chapters 455 and 471
- Disciplinary Cases Review
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).
Florida 2021 Renewal – Ethics for Professional Engineers: 1 CEH
Preview Course: Florida Ethics
- Florida Approved Course #0010039
- Approved Course for February 28, 2021 Renewal Deadline
- This course satisfies the one (1) hour ethics requirement
The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- The engineer’s duty to protect the public
- The engineer’s duty to make objective and truthful statements
- The engineer’s duty to limit practice to his or her field of competence
- The engineer’s duty to maintain client confidentiality
- The engineer’s responsibility to the profession
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).
Advanced Fabricated Building: 6 PDH
Preview Course: Advanced Fabricated Building
- Florida Approved Area of Practice Course #0009697
In this course the student will understand the building requirements of manufactured structures, particularly residential homes in Florida, as well as understand the various fabrication materials used for other advanced building projects.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Discuss building codes & HUD codes for fabricated structures
- Understand the materials & products of manufactured buildings
- Discuss systems & systems testing of manufactured buildings
- Explain the various fabrication products for advanced construction
- Discuss the benefits and drawbacks of each of these fabrication products
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 continuing education hours (CEH).
Durability by Design: 5 PDH
Preview Course: Durability by Design
- Florida Approved Area of Practice Course #0009696
In this course the student will receive guidance on designing durable homes for today’s housing industry, addressing critical topics, including water vapor management, envelope design, and natural hazards.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Explain durability and critical areas of concern on residential structures
- Understand the negative effects of ground water, rain water, and water vapor
- Discuss HVAC and plumbing designs for durability
- Discuss effects of solar radiation and mitigation techniques
- Explain decay, corrosion, and natural hazards effects and solutions for durability
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 5 continuing education hours (CEH).
Innovative Building Technology: 5 PDH
Preview Course: Innovative Building Technology
- Florida Approved Area of Practice Course #0009696
In this course the student will understand the design process of building and constructing modern innovative buildings using new technology products and methods to increase building efficiency, durability, and sustainability.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Discuss the four decision phases for any project
- Understand the economics of implementing new technologies into the design and construction
- Discuss cost/benefits into the decision making process
- Explain feasibility by performance and economics
- Discuss performance measures through design and construction
- Understand building efficiency, durability, and sustainability
- Become familiar with the evaluation tools and resources available during design and construction
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 5 continuing education hours (CEH).
Preview Course: Florida Laws and Rules
Preview Course: Florida Ethics
Preview Course: Advanced Fabricated Building
Preview Course: Durability by Design
Preview Course: Innovative Building TechnologySelect “Preview Course” to view prior to purchaseSelect “Add to Cart” to purchase
