Sale!

Nevada-Land Surveyors’s Package: 30 PDH

$90.00

Eight Land Surveying courses courses that will earn 30 PDH guaranteed to be accepted by the Nevada Board of Licensure of Professional Engineers and Professional Land Surveyors Instructor: Raymond Bosek, PE

Land Surveyor’s Ethics: 2 PDH

In this ethics course the student will understand the standards of professional behavior for adherence to the highest ethical conduct and revisit the emphasis that the holder of a professional license has a direct and vital impact on the safety, health, and welfare of the public.

Public Land Survey: Rectangular System: 8 PDH

In this course the student will review the rectangular surveying system which has been used continuously in the United States since 1785. As all facets of this system occasionally come into use, the student will become well versed in the field procedures of conducting an original survey covering both historical and current methods.

Aerial Photogrammetry: 5 PDH

In this course the student will understand procedural guidance, technical specifications, and quality control (QC) criteria for performing aerial photogrammetric mapping activities.

Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors : 4 PDH

This course is an introduction of using sUAS in land surveying. From FAA licensing requirements to common sUAS products and software, with an understanding of these basics a land surveyor can easily get started in using this up and coming technology.

Airborne Topographic LiDAR: 3 PDH

In this course the student will review the principles of Airborne Topographic LiDAR and learn how to utilize methods to employ this technology in the field.

Construction Surveying Curves: 3 PDH

In this course the student will learns to locate points using angles and distances for establishing curves. An essential tool in construction surveying when determining the line of a curve for road layout or some other type of curved construction.

Description of Lands: 3 PDH

This course provides guidance for documenting accurate boundary descriptions and locations by survey in the standards followed for Executive and public land orders and proclamations.

Corner Restoration Fundamentals: 2 PDH

In this course the student will understand the understand federal guidelines of resurveying corner monuments and the procedures and laws to successfully reestablish these boundaries.


Preview Course: Land Surveyor’s Ethics
Preview Course: Public Land Survey: Rectangular System
Preview Course: Aerial Photogrammetry
Preview Course: Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors
Preview Course: Airborne Topographic LiDAR
Preview Course: Construction Surveying Curves
Preview Course: Description of Lands
Preview Course: Corner Restoration Fundamentals
SKU: NVLS-21 Categories: , , ,

Related courses

  • Sale! Civil Engineering Courses

    Missouri-Civil Engineering Package #2: 30 PDH

     $90.00 Add to cart
    Five Civil Engineering courses plus Missouri Statutes, Rules, & Ethics course that will earn 30 PDH guaranteed to be accepted by the Missouri Board for Architects, Professional Engineers, Professional Land Surveyors, and Landscape Architects Instructor: Raymond Bosek, PE

    Missouri – Rules, Statutes, & Ethics for Professional Engineers: 3 PDH

    Preview Course: Missouri Statutes, Codes, and Ethics
    In this course the student will study the Missouri Board for Architects, Professional Engineers, Professional Land Surveyors, and Landscape Architects Rules and Statutes including Ethics.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • The engineer’s guidelines for practicing within Missouri’s rules and statutes
      • The engineer’s duty to protect the public
      • The engineer’s duty to make objective and truthful statements
      • The engineer’s duty to limit practice to his or her field of competence
      • The engineer’s duty to maintain client confidentiality
      • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Engineer’s Guide to Corrosion-Causes, Protection and Control: 8 PDH

    Preview Course: Engineer’s Guide to Corrosion
    In this course the student will understand the process of corrosion on metals from its causes and effects into protection and control. The student will understand corrosion on a variety of metals and methods to mitigate and control corrosion over the life of a material.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

        • Discuss environmental factors that affect corrosion
        • Understand the eight major forms of corrosion
        • Discuss corrosion characteristics and properties of various common metals
        • Explain corrosion protection and methods of control
        • Discuss monitoring of corrosion and available inspection technologies
        • Understand the electrochemistry, kinetics, and thermodynamics of the corrosion process

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 8 professional development hours (PDH) of continuing education.

    Advanced Fabricated Building: 6 PDH

    Preview Course: Advanced Fabricated Building
    In this course the student will understand the building requirements of manufactured structures, particularly residential homes in Florida, as well as understand the various fabrication materials used for other advanced building projects.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

        • Discuss building codes & HUD codes for fabricated structures
        • Understand the materials & products of manufactured buildings
        • Discuss systems & systems testing of manufactured buildings
        • Explain the various fabrication products for advanced construction
        • Discuss the benefits and drawbacks of each of these fabrication products

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

    Durability by Design: 5 PDH

    Preview Course: Durability by Design
    In this course the student will receive guidance on designing durable homes for today’s housing industry, addressing critical topics, including water vapor management, envelope design, and natural hazards.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

          • Explain durability and critical areas of concern on residential structures
          • Understand the negative effects of ground water, rain water, and water vapor
          • Discuss HVAC and plumbing designs for durability
          • Discuss effects of solar radiation and mitigation techniques
          • Explain decay, corrosion, and natural hazards effects and solutions for durability

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 5 professional development hours (PDH) of continuing education.

    Innovative Building Technology: 5 PDH

    Preview Course: Innovative Building Technology
    In this course the student will understand the design process of building and constructing modern innovative buildings using new technology products and methods to increase building efficiency, durability, and sustainability.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

          • Discuss the four decision phases for any project
          • Understand the economics of implementing new technologies into the design and construction
          • Discuss cost/benefits into the decision making process
          • Explain feasibility by performance and economics
          • Discuss performance measures through design and construction
          • Understand building efficiency, durability, and sustainability
          • Become familiar with the evaluation tools and resources available during design and construction

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 5 professional development hours (PDH) of continuing education.

    Prescriptive Method for Structural Insulated Panels (SIPs) in Construction: 3 PDH

    Preview Course: Prescriptive Method for Structural Insulated Panels
    In this course the student will learn prescriptive requirements to facilitate the use of Structural Insulated Panels (SIPs) in wall systems for the construction of one- and two-family dwellings.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

          • Explain SIP materials, shapes, & standard sizes
          • Understand prescriptive provisions for wall thickness selection
          • Discuss Above grade wall requirements
          • Discuss SIP header & connection details
          • Explain construction details to design and construct residential wall systems using SIPs

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Preview Course: Missouri Statutes, Codes, and Ethics
    Preview Course: Engineer’s Guide to Corrosion
    Preview Course: Advanced Fabricated Building
    Preview Course: Durability by Design
    Preview Course: Innovative Building Technology
    Preview Course: Prescriptive Method for Structural Insulated Panels
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Sale! Mechanical Engineering Courses

    New Hampshire-Mechanical Engineering Package #3: 30 PDH

     $90.00 Add to cart
    Six Mechanical Engineering courses plus New Hampshire Statutes, Rules & Ethics course that will earn 30 PDH guaranteed to be accepted by the New Hampshire Board of Professional Engineers.Instructor: Seth Grablow, PE

    New Hampshire – Statutes, Rules and Ethics for Professional Engineers: 3 PDH

    In this course the student will study the New Hampshire Board of Professional Engineers Statutes and Rules including Professional Engineering Ethics.

    Systems Engineering Fundamentals Part 1: 5 PDH

    Part one of a two-part course, this course provides a thorough overview of the systems engineering process and presents a in-depth review of the tools and processes to to develop a system efficiently and effectively and to support that system through its life cycle.

    Systems Engineering Fundamentals Part 2: 5 PDH

    Part two of a two-part course, this course provides a thorough overview of the systems engineering process and presents a in-depth review of the tools and processes to to develop a system efficiently and effectively and to support that system through its life cycle.

    Improving Pumping System Performance: 4 PDH

    This course provides a thorough overview of pumping systems and their components and practical guidelines to enhance performance and increase efficiency.

    Improving Process Heating System Performance: 4 PDH

    This course provides a thorough overview of process heating systems and their components and practical guidelines to enhance performance and increase efficiency.

    Improving Steam System Performance: 5 PDH

    This course provides a thorough overview of steam systems and their components and practical guidelines to enhance performance and increase efficiency.

    Improving Compressed Air System Performance: 4 PDH

    This course provides a thorough overview of compressed air systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.


    Preview Course: New Hampshire Statutes Rules & Ethics
    Preview Course: Systems Engineering Fundamentals Part 1
    Preview Course: Systems Engineering Fundamentals Part 2
    Preview Course: Improving Pumping System Performance
    Preview Course: Improving Process Heating System Performance
    Preview Course: Improving Steam System Performance
    Preview Course: Improving Compressed Air System Performance
Scroll to Top