New Mexico-Land Surveyors’s Package: 30 PDH
$180.00 $90.00
Land Surveyor’s Ethics: 2 PDH
In this ethics course the student will understand the standards of professional behavior for adherence to the highest ethical conduct and revisit the emphasis that the holder of a professional license has a direct and vital impact on the safety, health, and welfare of the public.
Public Land Survey: Rectangular System: 8 PDH
In this course the student will review the rectangular surveying system which has been used continuously in the United States since 1785. As all facets of this system occasionally come into use, the student will become well versed in the field procedures of conducting an original survey covering both historical and current methods.
Aerial Photogrammetry: 5 PDH
In this course the student will understand procedural guidance, technical specifications, and quality control (QC) criteria for performing aerial photogrammetric mapping activities.
Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors : 4 PDH
This course is an introduction of using sUAS in land surveying. From FAA licensing requirements to common sUAS products and software, with an understanding of these basics a land surveyor can easily get started in using this up and coming technology.
Airborne Topographic LiDAR: 3 PDH
In this course the student will review the principles of Airborne Topographic LiDAR and learn how to utilize methods to employ this technology in the field.
Construction Surveying Curves: 3 PDH
In this course the student will learns to locate points using angles and distances for establishing curves. An essential tool in construction surveying when determining the line of a curve for road layout or some other type of curved construction.
Description of Lands: 3 PDH
This course provides guidance for documenting accurate boundary descriptions and locations by survey in the standards followed for Executive and public land orders and proclamations.
Corner Restoration Fundamentals: 2 PDH
In this course the student will learn about satellite photogrammetry and its commom applications. The student will review geo-positioning from satellite images and procedures for creating stereo pairs from satellite imagery as well as reviewing the top things to consider in buying optical satellite imagery.
Preview Course: Land Surveyor’s Ethics
Preview Course: Public Land Survey: Rectangular System
Preview Course: Aerial Photogrammetry
Preview Course: Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors
Preview Course: Airborne Topographic LiDAR
Preview Course: Construction Surveying Curves
Preview Course: Description of Lands
Preview Course: Corner Restoration Fundamentals
Related Courses
New Mexico-Structural Engineering Package: 30 PDH
$180.00$90.00 Add to cartSix Structural Engineering courses plus New Mexico Ethics, Laws, & Rules course that will earn 30 PDH guaranteed to be accepted by the
New Mexico State Board of Licensure for Professional EngineersInstructor: Raymond Bosek, PENew Mexico – Ethics, Laws, and Rules for Professional Engineers: 4 PDH
In this course the student will study two ethics courses including the New Mexico State Board of Licensure for Professional Engineers and Professional Surveyors Laws and Rules.
Design and Construction of Road Tunnels-Part 1 Planning: 5 PDH
In this course the student will come to understand a general overview of the planning process of a road tunnel project, geometrical requirements and recommendations of new road tunnels, investigative techniques and parameters required for planning, construction and design of road tunnels, and the different types of reports required for a road tunnel project.
Design and Construction of Road Tunnels-Part 2 Methodology and Excavation Support: 5 PDH
In this course the student will understand the construction methodology and excavation support systems for cut-and-cover road tunnels, design and construction issues for rock and soft ground tunneling, and the special approaches that must be made when passing through difficult ground.
Design and Construction of Road Tunnels-Part 3 Design and Detailing: 5 PDH
In this course the student will understand the concepts of the sequential excavation method as well as the design, purpose and construction of tunnel linings, immersed tunnels, and jacked box tunnels.
Design and Construction of Road Tunnels-Part 4 Obstacles and Mitigations: 5 PDH
In this course the student will understand the reasons and methods to consider regarding seismic activity in the design process. The concepts of mined/bored tunnel construction engineering. Also, how to monitor the performance of the tunnel construction process, and how to identify, characterize and repair tunnels.
Design of Commercial Buildings to Mitigate Terrorist Attacks: 4 PDH
This course provides guidance to engineers in methods to mitigate the effects of hazards resulting from terrorist attacks on new buildings. While focusing primarily on explosive attacks and design strategies to mitigate the effects of explosions, the course also addresses design strategies to mitigate the effects of chemical, biological and radiological attacks. In addition to the applicability to the design of new commercial office, retail, multi-family residential, and light-industrial buildings, many of the concepts presented are also applicable to other building types and/or existing buildings.
Cost Benefit of ICF: 2 PDH
This online course is based on a guide that provides cost comparisons of ICF construction to standard residential wood-frame construction, a comprehensive cost analysis of the monthly costs of home ownership for wood-frame and ICF homes, and a detailed discussion regarding many of the structural and energy performance benefits gained through the use of ICFs.
Preview Course: New Mexico Ethics, Laws & Rules
Preview Course: Design and Construction of Road Tunnels-Part 1
Preview Course: Design and Construction of Road Tunnels-Part 2
Preview Course: Design and Construction of Road Tunnels-Part 3
Preview Course: Design and Construction of Road Tunnels-Part 4
Preview Course: Design of Commercial Buildings to Mitigate Terrorist Attacks
Preview Course: Cost Benefit of ICFNew Mexico-Electrical Engineering Package: 31 PDH
$186.00$90.00 Add to cartFour Electrical Engineering courses plus New Mexico Ethics, Laws, & Rules course that will earn 31 PDH guaranteed to be accepted by the New Mexico State Board of Licensure for Professional Engineers Instructor: Juan Pesante, PENew Mexico – Ethics, Laws, and Rules for Professional Engineers: 4 PDH
Preview Course: New Mexico Ethics, Laws and Rules
In this course the student will study two ethics courses including the New Mexico State Board of Licensure for Professional Engineers and Professional Surveyors Laws and Rules.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- The engineer’s guidelines for practicing within New Mexico’s laws and rules
- The engineer’s duty to protect the public
- The engineer’s duty to make objective and truthful statements
- The engineer’s duty to limit practice to his or her field of competence
- The engineer’s duty to maintain client confidentiality
- The engineer’s responsibility to the profession
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.
Basic Electrical and DC Theory: 9 PDH
Preview Course: Basic Electrical
Do you know where electricity comes from? To be able to say yes to that question, you must understand a bit about the physics of matter. In this course you’ll learn the basics involving: matter, electron theory, magnetism, electromagnetism, the laws of electrical circuits, series circuits, parallel circuits, series-parallel circuits and the basic electrical formulas.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- How is DC voltage produced and what does an electric circuit consist of
- What is a rectifier and how half-wave bridge rectifiers differ from full-wave bridge rectifiers
- What is the difference between a schematic diagram, one-line diagram, block diagram and wiring diagram
- What is resistivity and how temperature affects the resistance of materials
- What is the difference between open circuit, close circuit, and short circuit
- What primary characteristics identify a series, parallel or a combination circuit
- How to calculate the current and voltage drop in series, parallel or combination circuits
- How to calculate the equivalent resistance for a series, parallel or combination circuit
- What is meant by the terms voltage divider and current division
- How is electron flow theory different from conventional current theory
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 9 professional development hours (PDH) of continuing education.
Batteries, DC Circuits, DC Generators, & DC Motors: 6 PDH
Preview Course: Batteries & DC Circuits
This electrical training course provides a basic introduction to DC theory, electrical circuits, batteries and DC machinery (motors and generators). This course is essential to electrical engineers to refresh upon the basics and relearn the basic knowledge of electrical principals and equipment usages and applications.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Battery operations: series, parallel, primary, seconday, shelf life, etc
- Battery types: wet, dry, alkaline, etc
- Battery harzards
- Inductance
- Capacitance
- DC generator construction
- DC generator theory of operation
- DC generator voltage production, ratings, & losses
- DC motor theory
- DC motor construction and operation
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.
AC Theory, Circuits, Generators & Motors: 6 PDH
Preview Course: AC Theory & Circuits
AC circuit theory can cause engineers a lot of difficulty; however this course will attempt to make the concept easy to see and understand. Numerous pictures and graphs are used to show the basic fundamentals of how Alternating Current works. This course also details the general theory and equations for AC Circuit analysis, AC generators and AC Motors.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- AC motor theory
- AC motor construction and operation
- AC motor applications and usage
- Transformer theory and design
- Electronic Measuring devices
- Instrument construction
- Distribution systems
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.
AC Motors, Transformers, Instruments & Distribution Systems: 6 PDH
Preview Course: AC Motors & Distribution
This course provides an excellent overview of 1) AC motor theory, applications, and industrial usage, 2) Transformers and transformer design, 3) Instruments and measuring devices, and 4) distribution systems.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- AC motor theory
- AC motor construction and operation
- AC motor applications and usage
- Transformer theory and design
- Electronic Measuring devices
- Instrument construction
- Distribution systems
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.
Continuing Professional Development (CPD) Requirements
Continuing Education or PDH is known as CPD in New Mexico
New Mexico professional engineers are required to earn 30 PDH biennially. All of the required hours can be earned through online continuing education courses. EZpdh.com courses are accepted by the New Mexico State Board of Licensure for Professional Engineers & Professional Surveyors. The following table shows a quick rundown of license renewal requirements.Subject Requirement Hours Required 30 hours biennially Renewal Dates December 31 Odd Years for licenses ending in odd numberDecember 31 Even Years for licenses ending in even number Course Approval The Board does not require pre-approval for providers or specific courses. Each engineer must determine whether an activity meets the Board’s requirements Course Content Must have a clear purpose and objective which will maintain, improve, or expand the skills and knowledge of the licensee relevant to the practice of engineering
Two (2) PDH must be earned in ethicsOnline Courses Accepted. For Professional Engineers, there is no limit on the number of PDHs that can be earned through online continuing education. PDH Carryover A maximum of 15 PDH may be carried forward into the next renewal period Additional - For Dual licenses, one half of the required 30 PDH must cover each profession
- PDH completion records must be maintained for a minimum of 4 years. EZpdh.com helps you meet this requirement by providing you with the ability to instantly access and print a certificate upon successful completion of a course. Additionally, your certificates of completion are securely maintained by EZpdh.com for a minimum of seven years and can be accessed online through your login account
State Website Access State Website Preview Course: New Mexico Ethics, Laws and Rules
Preview Course: Basic Electrical
Preview Course: Batteries & DC Circuits
Preview Course: AC Theory & Circuits
Preview Course: AC Motors & DistributionClick “Preview Course” to view prior to purchaseClick “Add to Cart” to purchase