Save $30.00!

North Carolina-Structural Engineering Package: 15 PDH

$90.00 $60.00

Students Completed: 1020

North Carolina Approved Sponsor No: S-0650
Four Structural Engineering courses plus North Carolina Laws, Rules, & Ethics course that will earn 15 PDH guaranteed to be accepted by the North Carolina Board of Examiners for Engineers and SurveyorsInstructor: Raymond Bosek, PE

North Carolina – Laws, Rules, & Ethics for Professional Engineers: 3 PDH

Preview Course: North Carolina Laws, Rules and Ethics
In this course the student will study the North Carolina State Board of Examiners for Engineers and Surveyors Laws and Rules, including Professional Engineering Ethics.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

  • The engineer’s guidelines for practicing within North Carolina laws and rules
  • The engineer’s duty to protect the public
  • The engineer’s duty to make objective and truthful statements
  • The engineer’s duty to limit practice to his or her field of competence
  • The engineer’s duty to maintain client confidentiality
  • The engineer’s responsibility to the profession

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

Home Builders Guide to Earthquake Resistant Building Design: 5 PDH

Preview Course: Home Builders Guide to Earthquake Resistant Building Design
In this course, the student will review Chapters 1-4 from “Homebuilders Guide to Earthquake Resistant Design and Construction”, FEMA 232 – June 2006 prepared by the Building Seismic Safety Council for the Federal Emergency Management Agency of the Department of Homeland Security.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

  • Background & History
  • Above-Code Recommendations
  • International Residential Code & IRC Seismic Design Categories
  • Building Response & Concepts Concerning Site
  • Other Hazards including Coastal Hazards
  • Earthquake Resistant Requirements
  • IRC General Earthquake Limitations
  • Load Path
  • Lateral Capacities
  • House Configuration Irregularities
  • Foundation Requirements including Concrete Foundations & Masonry Foundations
  • Special Soil Conditions
  • Foundation Resistance to Sliding Loads
  • Special Considerations for Cut & Fill Sites
  • Foundation Design and Reinforcement
  • Interior Braced Walls Anchoring
  • Floor Design & Construction including Wood Frame, Cantilevered & Concrete Slab-On-Grade
  • Requirements for Blocking
  • Floor Sheathing

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 5 professional development hours (PDH) of continuing education.

Design of Heavy Duty Concrete Floor Slabs on Grade: 3 PDH

Preview Course: Design of Heavy Duty Concrete Floor Slabs on Grade
This course describes the criteria for the design of concrete floor slabs on grade in buildings for heavy loads. Concrete floor slabs on grade are often subjected to heavy loads in buildings such as wall loads, stationary live loads and moving loads. The entire design procedure is based on a working stress concept. This course will provide the student with the criteria needed to design concrete floor slabs on grade subjected to heavy loads. Design examples are shown to aid in understanding the course material.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

  • The steps required to design a heavy duty concrete floor slab
  • How to determine floor slab requirements for wall loads, stationary wall loads and moving loads
  • How to investigate the subgrade and environmental conditions relevant to the design
  • How to determine the modulus of subgrade reaction for various soils

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

Cost Benefit of ICF: 2 PDH

Preview Course: Cost Benefit of ICF
This online course is based on a guide that provides cost comparisons of ICF construction to standard residential wood-frame construction, a comprehensive cost analysis of the monthly costs of home ownership for wood-frame and ICF homes, and a detailed discussion regarding many of the structural and energy performance benefits gained through the use of ICFs.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

  • Become familiar with ICF construction
  • Be made aware of the many benefits gained through the use of ICF construction
  • Comparative performance and cost comparison of ICF home vs wood frame home
  • Structral safety and hazard mitigation
  • Energy cost comparison of ICF home

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

Structural Design Criteria For Structures Other Than Buildings: 2 PDH

Preview Course: Structural Design Criteria For Structures Other Than Buildings
This two hour online course establishes structural design criteria for structures other than buildings, furnishes design guidance for various types of structures, and identifies special considerations with regard to certain materials in specific applications. Structures other than buildings which are covered in this course include the following: bridges; dock and harbor facilities; drainage structures; bulk material structures; water and wastewater structures; and mechanical, electrical, and communication structures. The course materials are based entirely on the Technical Manual TM 5-809-6/AFM 88-3 of Joint Departments of the Army and Air Force USA: Structural Design Criteria for Structures Other Than Buildings.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

  • Know the common building materials used in construction
  • Types of structures used in transportation, water & electrical distribution
  • Support requirements for mechanical systems and bulk materials
  • Design criteria for various types of structures
  • Identify special considerations with regard to certain materials in specific applications.

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.
North Carolina

Continuing Professional Competency (CPC) Requirements

Continuing Education or PDH is known as CPC in North Carolina
North Carolina professional engineers are required to earn 15 PDH annually. All of the required hours can be earned through online continuing education courses. The following table shows a quick rundown of license renewal requirements.

EZpdh is a North Carolina Approved Sponsor (Number:S-0650)

 

Click to Verify

SubjectRequirement
Hours Required15 hours annually
Renewal DatesDecember 31 every year
Course ApprovalThe Board requires pre-approval for providers/sponsors EZpdh is a North Carolina Approved Sponsor (Number:S-0650) (Note: The board does not approve courses, only approves sponsors)
Course ContentWhile the Board does not have specific acceptance rules, its website states that one or more of the following criteria should be used to make the determination of acceptable material:
■The course or activity is taken through an “Approved Sponsor.” EZpdh is a North Carolina Board “Approved Sponsor.”
■The licensee can substantiate that the course or activity has maintained, improved, or expanded the skills and knowledge relevant to his/her field of practice
■The activity will enhance the licensee’s ability to provide engineering/surveying services in a professional and competent manner and better protect the health, safety, and welfare of the public
■The subject matter of the course or activity is related to the licensee’s professional practice
■The course or activity is aimed at engineers/surveyors and is of a technical nature
■Advanced computer courses to be used in professional practice
Online CoursesAccepted. For Professional Engineers, there is no limit on the number of PDHs that can be earned through online continuing education
PDH CarryoverA maximum of 15 PDH may be carried forward into the next renewal period
Additional
  1. For dual licensees, the number of PDH remains 15 annually; however, a minimum of one-third of the required credits must pertain to each profession
  2. PDH completion records must be maintained for a minimum of 3 years. EZpdh.com helps you meet this requirement by providing you with the ability to instantly access and print a certificate upon successful completion of a course. Additionally, your certificates of completion are securely maintained by EZpdh.com for a minimum of seven years and can be accessed online through your login account
Official Laws and RulesDownload Laws and Rules
State WebsiteAccess State Website

SKU: NCSE-20 Categories: ,