Ohio-Land Surveyors’s Package: 30 PDH
$180.00 $90.00
Course Package consists of:
- Ohio – Laws, Rules, and Ethics (Ohio Timed): 3 PDH
- Public Land Survey: Rectangular System (Ohio Timed): 7 PDH
- Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors (Ohio Timed): 5 PDH
- Aerial Photogrammetry (Ohio Timed): 5 PDH
- Construction Surveying Curves (Ohio Timed): 3 PDH
- Airborne Topographic LiDAR (Ohio Timed): 2 PDH
- Corner Restoration Fundamentals (Ohio Timed): 2 PDH
- Description of Lands: 3 PDH (Online Correspondence)
Preview Course: Public Land Survey
Preview Course: Introduction to sUAS
Preview Course: Aerial Photogrammetry
Preview Course: Construction Surveying Curves
Preview Course: Airborne Topographic LiDAR
Preview Course: Corner Restoration Fundamentals
Preview Course: Description of LandsClick “Preview Course” to view prior to purchaseClick “Add to Cart” to purchase
Each courses is broken down into multiple timed lessons. Number of lessons and time vary, reference lesson length.
Upon entering a lesson, a timer will start and will auto-complete the lesson when the specified time has passed. Each lesson must be completed in one sitting; however, the auto-complete feature ensures all progress is saved, timed and tracked. Lessons vary from 5 up to 55 minutes and courses may have from 4 to 15 lessons, reference Preview Course.
The final lesson is the course quiz, passing with a 70% or greater will complete the course and generate a certificate of completion. The quiz can be taken multiple times until passing, to help you pass the quiz, it is open book with access to the entire course while completing the quiz.
Related Courses
Texas-Mechanical Engineering Package #2: 15 PDH
$90.00$60.00 Add to cartTwo Mechanical Engineering courses plus Texas Laws, Rules, & Ethics course that will earn 15 PDH guaranteed to be accepted by the Texas Board of Professional Engineers & Land SurveyorsInstructor: Seth Grablow, PETexas – Laws, Rules, & Ethics for Professional Engineers: 3 PDH
Preview Course: Texas Laws, Rules and Ethics
In this course the student will study the Texas Board of Professional Engineers Statutes and Rules & Regulations, including Professional Engineering Ethics.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- The engineer’s guidelines for practicing within Texas’s laws and rules
- The engineer’s duty to protect the public
- The engineer’s duty to make objective and truthful statements
- The engineer’s duty to limit practice to his or her field of competence
- The engineer’s duty to maintain client confidentiality
- The engineer’s responsibility to the profession
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.
Mechanical Systems Commissioning: 6 PDH
Preview Course: Mechanical Systems Commissioning
In this course the student will learn the various benefits commissioned mechanical equipment has to a facility by understanding the procedures in developing a commissioning program for mechanical equipment and the detailed processes effective in verifying proper system installation.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Discuss the need for commissioning mechanical equipment
- Understand the commissioning process
- Explain commissioning of HVAC equipment
- Explain commissioning of Generators And Ancillary Equipment
- Explain commissioning of Air Compressors And Pneumatic Control Systems
- Explain commissioning of Fire Suppression Systems
- Explain commissioning of Cranes And Elevators
- Explain commissioning of Water And Sewage Treatment Systems
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.
Solar Hot Water Systems Design: 6 PDH
Preview Course: Solar Hot Water Systems Design
This course will assist an engineer to understand the optimal and reliable configurations of solar water heating systems in different climates along with design specifications, planning principles, and guidelines for such systems that serve building clusters with significant domestic hot water needs.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Discuss solar energy and its constraints
- Understand solar hot water thermal system configurations
- Discuss applications in the government sector
- Explain solar hot water design and design considerations
- Discuss solar hot water system performance
- Understand solar hot water system maintenance
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.
Preview Course: Texas Laws, Rules and Ethics
Preview Course: Mechanical Systems Commissioning
Preview Course: Solar Hot Water Systems DesignClick “Preview Course” to view prior to purchaseClick “Add to Cart” to purchaseGeorgia-Mechanical Engineering Package: 30 PDH
$180.00$90.00 Add to cartSix Mechanical Engineering courses plus Georgia Laws, Rules, and Ethics course that will earn 30 PDH guaranteed to be accepted by the Georgia State Board of Registration for Professional Engineers and Land Surveyors Instructor: Seth Grablow, PEGeorgia – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
Preview Course: Georgia Laws, Rules, and Ethics
In this course the student will study the Georgia State Board of Registration for Professional Engineers and Land Surveyors Statutes & Regulations, including Professional Engineering Ethics.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- The engineer’s guidelines for practicing within Georgia’s laws and rules
- The engineer’s duty to protect the public
- The engineer’s duty to make objective and truthful statements
- The engineer’s duty to limit practice to his or her field of competence
- The engineer’s duty to maintain client confidentiality
- The engineer’s responsibility to the profession
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.
Thermodynamics: 8 PDH
Preview Course: Thermodynamics
This course provides a detailed overview of Thermodynamics Principles and Practices including thermodynamic principles in practical industrial, commercial and residential applications. The student will comprehend, analyze and solve various types of practical thermodynamic problems through several case studies. Laws, equations, graphs, charts, tables and diagrams, pertaining to various thermodynamics concepts, are covered and utilized in the analysis and solution of the case study problems.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Energy concepts and extension/application of the law of conservation of energy
- Conversion of thermal energy to electricity through steam turbines and electric generators
- Understanding and application of Steam Tables
- Fundamental and essential concepts such as entropy, enthalpy, heat of fusion, heat of sublimation, latent and sensible heat
- Thermodynamic processes
- Heat engine cycles
- Pyschrometric analysis based on psychrometric chart
- Refrigeration cycle related numerical analysis utilizing Pressure –Enthalpy Charts
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 8 professional development hours (PDH) of continuing education.
Heat Transfer: 4 PDH
Preview Course: Heat Transfer
The transfer of heat is an integral part of many industrial processes. Moreover, heat transfer affects our everyday lives – from an oven heating our dinner to the wind cooling us on a hot summer day. Thus, it is important that the engineer understands how to apply the basic principles of heat transfer to solve real-world problems.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Heat transfer definitions and terminology, including heat flux, thermal conductivity, LMTD, and heat transfer coefficients
- Conduction and the equivalent resistance formulas
- Convection and use of the overall heat transfer coefficient
- Radiant heat transfer, including black bodies, gray bodies and emissivity
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.
Fluid Flow: 4 PDH
Preview Course: Fluid Flow
Fluid flow and practical fluid mechanics is essential to any engineer’s knowledge base. This course will overview the basic principles of fluid flow including the three key attributes to solve all fluid problems. Bernoulli Equation will be discussed in detail to enable understanding of different types of energy in a fluid stream. Laminar and turbulent flow, head loss, and factors affecting head loss will also be discussed in detail and explained with practical problems.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Shear Stress in a fluid
- Conservation of Mass
- Conservation of Momentum
- Reynolds number
- Laminar versus turbulent flow
- Bernoulli Equation
- Major head losses
- Minor head losses
- System level analysis
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.
Chillers, Refrigerant Compressors, and Heating Systems: 5 PDH
Preview Course: Chillers & Refrigerants
This course focuses on the equipment and equipment components used to generate heating and cooling. It does not include fans and pumps. This distinction is clear for most equipment types, such as unit heaters, boilers, and chillers. However, for packaged air-conditioning (AC) equipment the distinction can be subtle. Most packaged AC equipment is treated as a unit by performance rating procedures. Hence, separation of the fans is difficult. For this study, only the refrigerant compressors of packaged equipment are considered.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Accurate estimates of the energy used by primary cooling in the US commercial building sector
- Accurate estimates of the energy used by primary heating in the US commercial building sector
- Factors which contribute to energy use by the equipment
- Baseline estimate of current national energy use
- Calculation of the national energy savings impact
- Methods & options for reducing energy usage
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 5 professional development hours (PDH) of continuing education.
Diesel Engine Fundamentals I: 3 PDH
Preview Course: Diesel I & II
Part I of a two-part series. This course provides the engineer the basic understanding of the operation and design of Diesel Engines. The student will learning learn the fundamentals from the earlier history to the basic components which make up all diesel engines today.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Diesel engine history
- Differences to other combustible engines
- Major components
- Cooling systems
- Lubrication systems
- Fuel systems
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.
Diesel Engine Fundamentals II: 3 PDH
Preview Course: Diesel I & II
Part II of a two-part series. This course provides the engineer the basic understanding of the operation and design of Diesel Engines. The student will learn in depth, the diesel engine operation including an overview of all basic components as well as the different cycles and the operation of all essential systems of modern day diesel engines.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Exhaust system
- Operation terminology
- Compression ratio
- Basic diesel cycles
- Four & two stroke cycles
- Engine control
- Fuel control
- Engine protection
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.
Continuing Professional Competency (CPC) Requirements
Continuing Education or PDH is known as CPC in Georgia
Georgia professional engineers are required to earn 30 PDH biennially. All of the required hours can be earned through online continuing education courses. EZpdh.com courses are accepted by the Georgia State Board of Registration for Professional Engineers and Land Surveyors. The following table shows a quick rundown of license renewal requirements.Subject Requirement Hours Required 30 hours biennially Renewal Dates December 31 of even-numbered years Course Approval The Board does not require pre-approval for providers or specific courses. Each engineer must determine whether an activity meets the Board’s requirements Course Content Technical or professional content is accepted, although there are no specific restrictions on other types of content. In general, the course must have a “clear purpose and objective which will maintain, improve, or expand the skills and knowledge relevant to the licensee’s field of practice” Online Courses Accepted. For Professional Engineers, there is no limit on the number of PDHs that can be earned through online continuing education. PDH Carryover A maximum of 15 PDH may be carried forward into the next renewal period Additional - Dual licensees are required to report a minimum of thirty (30) PDH units for each renewal period, with at least ten (10) PDH units earned in each profession and the balance of hours earned in the other profession
- PDH completion records must be maintained for a minimum of 4 years. EZpdh helps you meet this requirement by providing you with the ability to instantly access and print a certificate upon successful completion of a course. Additionally, your certificates of completion are securely maintained by EZpdh for a minimum of seven years and can be accessed online at any time through your login account
State Website Access State Website Preview Course: Georgia Laws, Rules, and EthicsPreview Course: ThermodynamicsPreview Course: Heat TransferPreview Course: Fluid FlowPreview Course: Chillers & RefrigerantsPreview Course: Diesel I & IIClick “Preview Course” to view prior to purchaseClick “Add to Cart” to purchase