Virginia-Land Surveyors’s Package: 17 PDH
$102.00 $64.00
Land Surveyor’s Ethics: 2 PDH
In this ethics course the student will understand the standards of professional behavior for adherence to the highest ethical conduct and revisit the emphasis that the holder of a professional license has a direct and vital impact on the safety, health, and welfare of the public.
Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors : 4 PDH
This course is an introduction of using sUAS in land surveying. From FAA licensing requirements to common sUAS products and software, with an understanding of these basics a land surveyor can easily get started in using this up and coming technology.
Airborne Topographic LiDAR: 3 PDH
In this course the student will review the principles of Airborne Topographic LiDAR and learn how to utilize methods to employ this technology in the field.
Construction Surveying Curves: 3 PDH
In this course the student will learns to locate points using angles and distances for establishing curves. An essential tool in construction surveying when determining the line of a curve for road layout or some other type of curved construction.
Description of Lands: 3 PDH
This course provides guidance for documenting accurate boundary descriptions and locations by survey in the standards followed for Executive and public land orders and proclamations.
Corner Restoration Fundamentals: 2 PDH
In this course the student will understand the understand federal guidelines of resurveying corner monuments and the procedures and laws to successfully reestablish these boundaries.
Related Courses
New York-Mechanical Engineering Package: 36 PDH
$378.00$189.00 Add to cartNew York Approved Sponsor #166Thirteen live interactive webinars and five distance learning courses guaranteed to be accepted by the New York State Education Department-Professional Engineering and Land SurveyingInstructor: Seth Grablow, PE
This package satisfies all 36 required hours of professional development.- 1 hour professional ethics, ref. §68.14 c.1.
- 18 hours of live interactive courses, ref. ref. §68.14 c.3.
- 18 hours of distance education courses, ref. ref. §68.14 c.3.
Package includes the following 13 live interactive courses:View Webinar ScheduleWebinar: Design for Construction Safety: 1 PDH
This course will provide engineers with information on how to recognize and anticipate construction hazards and how to eliminate them with well thought out design features. This course emphasizes permanent design features that eliminate or reduce the risk to hazards.Read More
Webinar: Ethics for the Practicing Engineer: 1 PDH
In this introductory ethics course the engineer will understand why we study ethics as engineering professionals, ethical theories to use in our ethical decision making, and some tools to identify and resolve ethical conflicts.Read More
Webinar: Administering the Construction Project: 2.5 PDH
In this course we will review the management and administrative procedures that practitioners will need to guide construction projects from the pre-construction phase to project close out successfully. The course will benefit professional engineers serving as project managers or field representatives by presenting techniques that can be applied to the construction project to enhance operations, improve scheduling, mitigate issues, and help minimize and resolve claims or disputes.Read More
Webinar: Infrastructure Planning: 2 PDH
This course presents the main concepts of infrastructure planning in the public sector including the environmental, social, and institutional assessments and discusses many planning methodologies and approaches. The purpose of this course is to provide practitioners involved in planning public infrastructure projects with guidelines to be considered and applied in the planning process.Read More
Webinar: Introduction to Mechanical Components: 1.5 PDH
Along with pumps and valves, reviewed in separate PDH courses, there are many other components that can be found in an industrial/power generation setting. Knowledge of these systems can be useful to any engineer. This online course provides a brief overview of air compressors, hydraulics, boilers, cooling towers, and other components likely to be installed in an industrial or power generation facility.Read More
Webinar: Modern Heat Pumps: 1 PDH
In this course the engineer will be introduced to modern heat pumps and their applications. This introductory course will enable the students to understand the basics of the latest heat pump technologies and how to apply to multiple applications.Read More
Webinar: Diesel Engine Fundamentals: 1.5 PDH
This course provides the engineer the basic understanding of the operation and design of Diesel Engines. The student will learn in depth, the diesel engine operation including an overview of all basic components as well as the different cycles and the operation of all essential systems of modern day diesel engines.Read More
Webinar: Fasteners: 1.5 PDH
This course presents an in-depth look at steel fasteners with focus on structural fasteners, since they are a critical part of most steel structures. A broad range of topics will be discussed including fastener strength, selection criteria, available coatings and testing. This course will go beyond the standards and specifications and provide engineers with helpful background information and practical strategies to mitigate fastener issues and keep projects trouble free.Read More
Webinar: Engineer’s Guide to Green Building: 1 PDH
In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of the attributes of green building methods and products and the design and developing considerations for all building & home systems.Read More
Webinar: Engineer’s Guide to Green Building-Part 2: 2 PDH
In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of an in-depth examination of all green materials and methods for building green, and a comprehensive green building checklist to review before, during, and after any green build.Read More
Webinar: Storm Shelters & Safe Rooms: 1 PDH
This course presents engineers with important information about the design and construction of community and residential safe rooms that will provide protection during tornado and hurricane events. The course will center around design guides FEMA P-320, P-361, and ICC 500.Read More
Webinar: 2020 NEC Significant Code Changes Part 1: 1 PDH
Part 1 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2020 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2017 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC from the introduction up to and including chapter 3.Read More
Webinar: 2020 NEC Significant Code Changes Part 2: 1 PDH
Part 2 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2020 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2017 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC for chapter 4.Read More
Package includes the following five distance education courses:Building Envelope Impact on HVAC Energy Use: 3 PDH
How airtight are the buildings you are responsible for? What is the energy load and indoor air quality like in your buildings? The only way to know is to perform a study. Despite common assumptions, measurements have shown that typical U.S. commercial buildings are not particularly airtight. In this course we present a recent simulation study on the impact of improving envelope airtightness in U.S. commercial buildings. You get documented, verifiable facts, report charts and graphs illustrating the findings, and a discussion from the report on the results of the study, Investigation of the Impact of Commercial Building Envelope Airtightness on HVAC Energy Use.Read MorePreview Course
Chillers, Refrigerant Compressors, and Heating Systems: 5 PDH
This course focuses on the equipment and equipment components used to generate heating and cooling. It does not include fans and pumps. This distinction is clear for most equipment types, such as unit heaters, boilers, and chillers. However, for packaged air-conditioning (AC) equipment the distinction can be subtle. Most packaged AC equipment is treated as a unit by performance rating procedures. Hence, separation of the fans is difficult. For this study, only the refrigerant compressors of packaged equipment are considered. Read MorePreview Course
Design of Small Water Systems: 3 PDH
This course focuses on criteria for water source development, design of small water supply, treatment, and distribution systems. This professional engineer online course is from the U.S. Army Corps of Engineers manual on the Design of Small Water Systems. This manual provides information of interest to planners and designers of small water systems. The major emphasis of this course is on the design of systems that will be effective and reliable, requiring a level of operation and management activity commensurate with their physical size and the available sources.Read MorePreview Course
Fundamentals of Gas Turbine Engines: 5 PDH
This course provides an overview of the development of gas turbines, operational theory, Brayton cycle, conditions and design limitations that affect performance, types of turbine engines and components utilized in a gas turbine engine.Read MorePreview Course
Water Cooled Air Conditioning Systems Part 1: 2 PDH
In this course the student will understand the requirements and best practices for the design, installation and commissioning of cooling tower systems of water cooled air conditioning systems.Read MorePreview Course
Texas-Mechanical Engineering Package #2: 15 PDH
$90.00$60.00 Add to cartTwo Mechanical Engineering courses plus Texas Laws, Rules, & Ethics course that will earn 15 PDH guaranteed to be accepted by the Texas Board of Professional Engineers & Land SurveyorsInstructor: Seth Grablow, PETexas – Laws, Rules, & Ethics for Professional Engineers: 3 PDH
Preview Course: Texas Laws, Rules and Ethics
In this course the student will study the Texas Board of Professional Engineers Statutes and Rules & Regulations, including Professional Engineering Ethics.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- The engineer’s guidelines for practicing within Texas’s laws and rules
- The engineer’s duty to protect the public
- The engineer’s duty to make objective and truthful statements
- The engineer’s duty to limit practice to his or her field of competence
- The engineer’s duty to maintain client confidentiality
- The engineer’s responsibility to the profession
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.
Mechanical Systems Commissioning: 6 PDH
Preview Course: Mechanical Systems Commissioning
In this course the student will learn the various benefits commissioned mechanical equipment has to a facility by understanding the procedures in developing a commissioning program for mechanical equipment and the detailed processes effective in verifying proper system installation.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Discuss the need for commissioning mechanical equipment
- Understand the commissioning process
- Explain commissioning of HVAC equipment
- Explain commissioning of Generators And Ancillary Equipment
- Explain commissioning of Air Compressors And Pneumatic Control Systems
- Explain commissioning of Fire Suppression Systems
- Explain commissioning of Cranes And Elevators
- Explain commissioning of Water And Sewage Treatment Systems
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.
Solar Hot Water Systems Design: 6 PDH
Preview Course: Solar Hot Water Systems Design
This course will assist an engineer to understand the optimal and reliable configurations of solar water heating systems in different climates along with design specifications, planning principles, and guidelines for such systems that serve building clusters with significant domestic hot water needs.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Discuss solar energy and its constraints
- Understand solar hot water thermal system configurations
- Discuss applications in the government sector
- Explain solar hot water design and design considerations
- Discuss solar hot water system performance
- Understand solar hot water system maintenance
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.
Preview Course: Texas Laws, Rules and Ethics
Preview Course: Mechanical Systems Commissioning
Preview Course: Solar Hot Water Systems DesignClick “Preview Course” to view prior to purchaseClick “Add to Cart” to purchase