Shop

  • Sale!

    Utah-Structural Engineering Package: 30 PDH

    $180.00 $90.00 Add to cart
    Six Structural Engineering courses plus Utah Laws, Rules, & Ethics course that will earn 30 PDH guaranteed to be accepted by the Utah Professional Engineers and Professional Land Surveyors Licensing Board Instructor: Raymond Bosek, PE

    Utah – Laws, Rules, and Ethics for Professional Engineers: 3 PDH

    In this course the professional engineering student will study the Utah Professional Engineers and Professional Land Surveyors Licensing Board Laws & Rules, including Professional Engineering Ethics.

    Design and Construction of Road Tunnels-Part 1 Planning: 5 PDH

    In this course the student will come to understand a general overview of the planning process of a road tunnel project, geometrical requirements and recommendations of new road tunnels, investigative techniques and parameters required for planning, construction and design of road tunnels, and the different types of reports required for a road tunnel project.

    Design and Construction of Road Tunnels-Part 2 Methodology and Excavation Support: 5 PDH

    In this course the student will understand the construction methodology and excavation support systems for cut-and-cover road tunnels, design and construction issues for rock and soft ground tunneling, and the special approaches that must be made when passing through difficult ground.

    Design and Construction of Road Tunnels-Part 3 Design and Detailing: 5 PDH

    In this course the student will understand the concepts of the sequential excavation method as well as the design, purpose and construction of tunnel linings, immersed tunnels, and jacked box tunnels.

    Design and Construction of Road Tunnels-Part 4 Obstacles and Mitigations: 5 PDH

    In this course the student will understand the reasons and methods to consider regarding seismic activity in the design process. The concepts of mined/bored tunnel construction engineering. Also, how to monitor the performance of the tunnel construction process, and how to identify, characterize and repair tunnels.

    Home Builders Guide to Earthquake Resistant Building Design: 5 PDH

    In this course, the student will review Chapters 1-4 from “Homebuilders Guide to Earthquake Resistant Design and Construction”, FEMA 232 – June 2006 prepared by the Building Seismic Safety Council for the Federal Emergency Management Agency of the Department of Homeland Security. The student must take a multiple-choice quiz consisting of twenty (20) questions at the end of this course to earn PDH credits.

    Cost Benefit of ICF: 2 PDH

    This online course is based on a guide that provides cost comparisons of ICF construction to standard residential wood-frame construction, a comprehensive cost analysis of the monthly costs of home ownership for wood-frame and ICF homes, and a detailed discussion regarding many of the structural and energy performance benefits gained through the use of ICFs.

  • Vermont – Laws, Rules, and Ethics for Professional Engineers: 3 PDH

    $18.00 Add to cart
    In this course the student will study the Vermont Board of Professional Engineering Laws & Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.
    Instructor: Raymond Bosek, PE
    In this course the student will study the Vermont Board of Professional Engineering Laws & Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Vermont's laws and rules
    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty-five (25) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

    Preview Course
    Click Preview Course to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Vermont – Laws, Rules, and Ethics for Professional Engineers: 3 PDH

    $18.00 Add to cart
    In this course the student will study the Vermont Board of Professional Engineering Laws & Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.
    Instructor: Raymond Bosek, PE
    In this course the student will study the Vermont Board of Professional Engineering Laws & Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Vermont's laws and rules
    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty-five (25) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

    Preview Course
    Click Preview Course to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Vermont – Laws, Rules, and Ethics for Professional Engineers: 3 PDH

    $18.00 Add to cart
    In this course the student will study the Vermont Board of Professional Engineering Laws & Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.
    Instructor: Raymond Bosek, PE
    In this course the student will study the Vermont Board of Professional Engineering Laws & Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Vermont's laws and rules
    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Preview Course
    Click Preview Course to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Vermont – Laws, Rules, and Ethics for Professional Engineers: 3 PDH

    $18.00 Add to cart
    In this course the student will study the Vermont Board of Professional Engineering Laws & Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.
    Instructor: Raymond Bosek, PE
    In this course the student will study the Vermont Board of Professional Engineering Laws & Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Vermont's laws and rules
    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Preview Course
    Click Preview Course to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Virginia – Laws, Rules, & Ethics for Professional Engineers: 3 PDH

    $18.00 Add to cart
    In this course the student will study the Virginia State APELSCIDLA Board Laws and Regulations, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.
    Instructor: Juan Pesante, PE
    In this course the student will study the Virginia State APELSCIDLA Board Laws and Regulations, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Virginia's laws and rules
    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Virginia – Laws, Rules, & Ethics for Professional Engineers: 3 PDH

    $18.00 Add to cart
    In this course the student will study the Virginia State APELSCIDLA Board Laws and Regulations, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.
    Instructor: Juan Pesante, PE
    In this course the student will study the Virginia State APELSCIDLA Board Laws and Regulations, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Virginia's laws and rules
    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty-five (25) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Virginia – Laws, Rules, & Ethics for Professional Engineers: 3 PDH

    $18.00 Add to cart
    In this course the student will study the Virginia State APELSCIDLA Board Laws and Regulations, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.
    Instructor: Juan Pesante, PE
    In this course the student will study the Virginia State APELSCIDLA Board Laws and Regulations, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Virginia's laws and rules
    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty-five (25) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Virginia – Laws, Rules, & Ethics for Professional Engineers: 3 PDH

    $18.00 Add to cart
    In this course the student will study the Virginia State APELSCIDLA Board Laws and Regulations, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.
    Instructor: Juan Pesante, PE
    In this course the student will study the Virginia State APELSCIDLA Board Laws and Regulations, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Virginia's laws and rules
    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Wastewater Treatment Plants: 1 PDH

    Wastewater Treatment Plants: 1 PDH

    $6.00 Add to cart
    Package plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.
    Instructor: Raymond Bosek, PE

    Package plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • General configuration of extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • Typical applications for extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • Advantages and disadvantages of extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • Design criteria for extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • Typical performance and costs of extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 professional development hours (PDH) of continuing education.

       

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Wastewater Treatment Plants: 1 PDH

    Wastewater Treatment Plants: 1 PDH

    $6.00 Add to cart
    Package plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.
    Instructor: Raymond Bosek, PE

    Package plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • General configuration of extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • Typical applications for extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • Advantages and disadvantages of extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • Design criteria for extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • Typical performance and costs of extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 professional development hours (PDH) of continuing education.

       

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Wastewater Treatment Plants: 1 PDH

    Wastewater Treatment Plants: 1 PDH

    $6.00 Add to cart
    Package plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.
    Instructor: Raymond Bosek, PE

    Package plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • General configuration of extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • Typical applications for extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • Advantages and disadvantages of extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • Design criteria for extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • Typical performance and costs of extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a ten (10) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one (1) professional development hours (PDH) of continuing education.

       

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Wastewater Treatment Plants: 1 PDH

    Wastewater Treatment Plants: 1 PDH

    $6.00 Add to cart
    Package plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.
    Instructor: Raymond Bosek, PE

    Package plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • General configuration of extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • Typical applications for extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • Advantages and disadvantages of extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • Design criteria for extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • Typical performance and costs of extended aeration, sequencing batch reactor, and oxidation ditch package plants
    • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a ten (10) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one (1) professional development hours (PDH) of continuing education.

       

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Water Cooled Air Conditioning Systems Part 1: 2 PDH

    $12.00 Add to cart
    In this course the student will understand the requirements and best practices for the design, installation and commissioning of cooling tower systems of water cooled air conditioning systems.
    Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Cooling Tower Types and Systems
    • Construction and Installation Requirements
    • Installation Locations
    • Water and Bleed-Off Water Water Control
    • Notices and Labels
    • Risk Management
    • Testing and Commissioning

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Water Cooled Air Conditioning Systems Part 1: 2 PDH

    $12.00 Add to cart
    In this course the student will understand the requirements and best practices for the design, installation and commissioning of cooling tower systems of water cooled air conditioning systems.
    Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Cooling Tower Types and Systems
    • Construction and Installation Requirements
    • Installation Locations
    • Water and Bleed-Off Water Water Control
    • Notices and Labels
    • Risk Management
    • Testing and Commissioning

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Water Cooled Air Conditioning Systems Part 1: 2 PDH

    $12.00 Add to cart
    In this course the student will understand the requirements and best practices for the design, installation and commissioning of cooling tower systems of water cooled air conditioning systems.
    Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Cooling Tower Types and Systems
    • Construction and Installation Requirements
    • Installation Locations
    • Water and Bleed-Off Water Water Control
    • Notices and Labels
    • Risk Management
    • Testing and Commissioning

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Water Cooled Air Conditioning Systems Part 1: 2 PDH

    $12.00 Add to cart
    In this course the student will understand the requirements and best practices for the design, installation and commissioning of cooling tower systems of water cooled air conditioning systems.
    Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Cooling Tower Types and Systems
    • Construction and Installation Requirements
    • Installation Locations
    • Water and Bleed-Off Water Water Control
    • Notices and Labels
    • Risk Management
    • Testing and Commissioning

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Water Cooled Air Conditioning Systems Part 2: 2 PDH

    $12.00 Add to cart
    In this course the student will understand the requirements and best practices for the operation and maintenance of cooling tower systems of water cooled air conditioning systems.
    Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Operation of Cooling Tower Systems
    • Maintenance of Cooling Tower Systems
    • Management of Cooling Tower Systems
    • Decommissioning of Cooling Tower Systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hour (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Water Cooled Air Conditioning Systems Part 2: 2 PDH

    $12.00 Add to cart
    In this course the student will understand the requirements and best practices for the operation and maintenance of cooling tower systems of water cooled air conditioning systems.
    Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Operation of Cooling Tower Systems
    • Maintenance of Cooling Tower Systems
    • Management of Cooling Tower Systems
    • Decommissioning of Cooling Tower Systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hour (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Water Cooled Air Conditioning Systems Part 2: 2 PDH

    $12.00 Add to cart
    In this course the student will understand the requirements and best practices for the operation and maintenance of cooling tower systems of water cooled air conditioning systems.
    Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Operation of Cooling Tower Systems
    • Maintenance of Cooling Tower Systems
    • Management of Cooling Tower Systems
    • Decommissioning of Cooling Tower Systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hour (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

State Approvals

All of our online courses comply with the Continuing Professional Competency Guidelines published by the National Council of Examiners for Engineering and Surveying (NCEES) and the International Association for Continuing Education & Training (IACEP), therefore, shall be acceptable to all the state boards requiring mandatory continuing education.
EZ-pdh.com approved provider map of USA for professional engineersKey
Approved Providers Mandatory

This column lists states which require continuing education (CE) be completed with a state approved provider. We are approved in all of the seven states requiring pre-approval. “Click to Verify” button will transfer you to the State Board website listing approved providers. We are listed under Ezekiel Enterprises, LLC or EZpdh.com with POC: Raymond Bosek

Florida:
Approved Provider Number:0006346
(listed as Ezekiel Enterprises, LLC)Click to VerifyArchitecture and Interior Design Approved Provider Number:PVD433(listed as Ezekiel Enterprises, LLC)
Click to Verify
Indiana:
CE Approved Provider CE21800049(listed as Ezekiel Enterprises, LLC)
Click to Verify
Louisiana:
CPD Approved Provider CPD.0000317(listed as Ezekiel Enterprises, LLC)
Click to VerifyMaryland:
Approved Provider(listed as EZpdh.com)
Click to VerifyNew Jersey:
Approved CPC Provider 24GP00009900(listed as EZpdh.com)
Click to VerifyNew York:
NYSED Approved Sponsor #166(listed as Ezekiel Enterprises, LLC)
Click to VerifyNorth Carolina:
Approved Sponsor Number:S-0650(listed as Ezekiel Enterprises, LLC)
Click to Verify

Not Mandatory

This column lists states which DO NOT require continuing education (CE) to be completed with a state approved provider. States transfer responsibility to engineer to determine if the CE is acceptable and the state reserves the right to disallow hours if they determined hours are unacceptable. We recommend to complete CE with only state pre-approved providers

Alabama
Alaska
Arkansas
Delaware
Georgia
Idaho
Illinois
Iowa
Kansas
Kentucky
Maine
Maryland
Michigan
Minnesota
Mississippi
Missouri
Montana
Nebraska
Nevada
New Hampshire
New Mexico
North Dakota
Ohio
Oklahoma
Oregon
Pennsylvania
South Carolina
South Dakota
Tennessee
Texas
Utah
Vermont
Virginia
West Virginia
Wisconsin
Wyoming

Read More about State ApprovalsAre you a Land Surveyor? – Click Here for State Approvals

Scroll to Top