Shop

  • Sale! Environmental engineering

    Tennessee-Chemical Engineering Package: 24 PDH

    $80.00 Add to cart
    Eight Chemical Engineering courses plus Tennessee Laws, Rules, & Ethics course that will earn 24 PDH guaranteed to be accepted by the Tennessee Board of Architectural and Engineering ExaminersInstructor: Raymond Bosek, PE

    Tennessee – Laws, Rules, and Ethics for Professional Engineers: 3 PDH

    In this course the student will study the Tennessee State Board of Architectural and Engineering Laws, Rules & Policies, including Professional Engineering Ethics.

    Fundamentals of Metals: 5 PDH

    The course provides an understanding of the structure and properties of metals, stress mechanisms, failure modes and the characteristics determine their usefulness for a specific application. Often, materials are subject to variable forces (loads). The engineer calculates these forces to establish the service that can be expected and material scientists experiment to determine how materials deform (elongate, compress, and twist) or break as a function of applied load, time, temperature, and other conditions.

    Process Design for Conversion of Biomass to Biofuels: 4 PDH

    In this course you the student will understand the motivation, process, design, and cost of converting biomass into biofuel. The focus of this course is to find a plausible pathway to convert algal carbohydrates and lipids to fuel and to minimize cost during production.

    Carbon Absorption of Volatile Organic Compounds: 3 PDH

    Carbon adsorption is used in air pollution control to remove volatile organic compounds (VOCs) from low to medium concentration gas streams, when stringent outlet concentration must be met and/or recovery of the VOC is desired. This course covers the types of adsorbers, adsorption theory, and design procedures for carbon adsorption equipment.

    Distressed Pavements Identification: 3 PDH

    This course enables the student to understand, evaluate, and determine which type of pavement distress is taking place on roadways and paved surfaces. The student will learn how to identify different types of pavement distresses and , severity levels, means to measure the distresses and methods to document.

    Deterioration of Concrete: 2 PDH

    This course is most relevant to engineers wishing to attain knowledge on the most common causes of problems in concrete. The course also provides a brief description of the basic mechanism of each common problem, a description of the typical symptoms that would be observed during a visual inspection, and suggests preventative methods or techniques to prevent further damage.

    Hazardous Waste Identification: 2 PDH

    This course covers hazardous waste regulated by the EPA under the Resource Conservation and Recovery Act (RCRA), starting with determining whether what waste is considered a solid waste according to the RCRA regulations and moving on to determining if it fits one of the RCRA requirements for being a hazardous waste.

    Wastewater Treatment Plants: 1 PDH

    Package plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.

    Chemical Deicers & Concrete Pavement: Impacts & Mitigation: 1 PDH

    In this course the student will understand the distresses caused to concrete by chemical deicers and methods used to minimize this distress.

  • Sale!

    Tennessee-Structural Engineering Package: 24 PDH

    $80.00 Add to cart
    Five Structural Engineering courses plus Tennessee Laws, Rules, & Ethics course that will earn 24 PDH guaranteed to be accepted by the Tennessee Board of Architectural and Engineering ExaminersInstructor: Raymond Bosek, PE

    Tennessee – Laws, Rules, and Ethics for Professional Engineers: 3 PDH

    In this course the student will study the Tennessee State Board of Architectural and Engineering Laws, Rules & Policies, including Professional Engineering Ethics.

    Design and Construction of Road Tunnels-Part 1 Planning: 5 PDH

    In this course the student will come to understand a general overview of the planning process of a road tunnel project, geometrical requirements and recommendations of new road tunnels, investigative techniques and parameters required for planning, construction and design of road tunnels, and the different types of reports required for a road tunnel project.

    Design and Construction of Road Tunnels-Part 2 Methodology and Excavation Support: 5 PDH

    In this course the student will understand the construction methodology and excavation support systems for cut-and-cover road tunnels, design and construction issues for rock and soft ground tunneling, and the special approaches that must be made when passing through difficult ground.

    Home Builders Guide to Earthquake Resistant Building Design: 5 PDH

    In this course, the student will review Chapters 1-4 from “Homebuilders Guide to Earthquake Resistant Design and Construction”, FEMA 232 – June 2006 prepared by the Building Seismic Safety Council for the Federal Emergency Management Agency of the Department of Homeland Security. The student must take a multiple-choice quiz consisting of twenty (20) questions at the end of this course to earn PDH credits.

    Design of Commercial Buildings to Mitigate Terrorist Attacks: 4 PDH

    This course provides guidance to engineers in methods to mitigate the effects of hazards resulting from terrorist attacks on new buildings. While focusing primarily on explosive attacks and design strategies to mitigate the effects of explosions, the course also addresses design strategies to mitigate the effects of chemical, biological and radiological attacks. In addition to the applicability to the design of new commercial office, retail, multi-family residential, and light-industrial buildings, many of the concepts presented are also applicable to other building types and/or existing buildings.

    Cost Benefit of ICF: 2 PDH

    This online course is based on a guide that provides cost comparisons of ICF construction to standard residential wood-frame construction, a comprehensive cost analysis of the monthly costs of home ownership for wood-frame and ICF homes, and a detailed discussion regarding many of the structural and energy performance benefits gained through the use of ICFs.

  • Texas – Laws, Rules, & Ethics for Professional Engineers: 3 PDH

    $18.00 Add to cart
    In this course the student will study the Texas Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.
    Instructor: Raymond Bosek, PE
    In this course the student will study the Texas Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Texas's laws and rules
    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Texas – Laws, Rules, & Ethics for Professional Engineers: 3 PDH

    $18.00 Add to cart
    This course satisfies the 1 required hour of professional ethics, ref. T.A.C. §137.17(d)
    In this course the student will study the Texas Board of Professional Engineers & Land Surveyors Laws and Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.
    Instructor: Raymond Bosek, PE
    In this course the student will study the Texas Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Texas's laws and rules
    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty-five (25) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Texas – Laws, Rules, & Ethics for Professional Engineers: 3 PDH

    $18.00 Add to cart
    This course satisfies the 1 required hour of professional ethics, ref. T.A.C. §137.17(d)
    In this course the student will study the Texas Board of Professional Engineers & Land Surveyors Laws and Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.
    Instructor: Raymond Bosek, PE
    In this course the student will study the Texas Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Texas's laws and rules
    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty-five (25) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Texas - Laws, Rules, & Ethics for Professional Engineers

    Texas – Laws, Rules, & Ethics for Professional Engineers: 3 PDH

    $18.00 Add to cart
    This course satisfies the 1 required hour of professional ethics, ref. T.A.C. §137.17(d)
    In this course the student will study the Texas Board of Professional Engineers & Land Surveyors Laws and Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.
    Instructor: Raymond Bosek, PE
    In this course the student will study the Texas Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Texas's laws and rules
    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty-five (25) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Texas - Laws, Rules, & Ethics for Professional Engineers

    Texas – Laws, Rules, & Ethics for Professional Engineers: 3 PDH

    $18.00 Add to cart
    This course satisfies the 1 required hour of professional ethics, ref. T.A.C. §137.17(d)
    In this course the student will study the Texas Board of Professional Engineers & Land Surveyors Laws and Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.
    Instructor: Raymond Bosek, PE
    In this course the student will study the Texas Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Texas's laws and rules
    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty-five (25) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Texas – Laws, Rules, & Ethics for Professional Engineers: 3 PDH

    $18.00 Add to cart
    This course satisfies the 1 required hour of professional ethics, ref. T.A.C. §137.17(d)
    In this course the student will study the Texas Board of Professional Engineers & Land Surveyors Laws and Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.
    Instructor: Raymond Bosek, PE
    In this course the student will study the Texas Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Texas's laws and rules
    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Placeholder
  • Placeholder
  • Sale! Civil Engineering Courses

    Texas-Civil Engineering Package: 15 PDH

    $60.00 Add to cart
    Two Civil Engineering courses plus Texas Laws, Rules, & Ethics course that will earn 15 PDH guaranteed to be accepted by the Texas Board of Professional Engineers & Land SurveyorsInstructor: Raymond Bosek, PE

    Texas – Laws, Rules, & Ethics for Professional Engineers: 3 PDH

    Preview Course: Texas Laws, Rules and Ethics
    In this course the student will study the Texas Board of Professional Engineers Statutes and Rules & Regulations, including Professional Engineering Ethics.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • The engineer’s guidelines for practicing within Texas’s laws and rules
      • The engineer’s duty to protect the public
      • The engineer’s duty to make objective and truthful statements
      • The engineer’s duty to limit practice to his or her field of competence
      • The engineer’s duty to maintain client confidentiality
      • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Pavement Design for Roads, Streets, Walks and Open Storage Areas: 6 PDH

    Preview Course: Pavement Design
    This online course provides guidance for design of pavements and supporting materials for roads, streets, walks and open storage areas. The contents include procedures for conducting preliminary site reconnaissance, traffic analyses, and criteria for the design of subgrade, subbase, base courses, flexible and rigid pavements.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Preliminary Soil Investigations
      • Vehicular Traffic Considerations
      • Flexible Pavement Materials & Subgrades
      • Bituminous Pavement
      • Flexible Pavement Design
      • Rigid Pavement Design
      • Concrete Pavement Design
      • Reinforced Concrete Pavements
      • Pavement Overlays
      • Joints For Plain & Reinforced Concrete
      • Roller-Compacted Concrete Pavements
      • Seasonal Frost Conditions

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

    Foundations in Expansive Soils: 6 PDH

    Preview Course: Foundations in Expansive Soils
    This course presents guidance and information for the geotechnical investigation necessary for the selection and design of foundations for heavy and light buildings constructed in expansive clay soil areas. The information in this course is generally applicable to many types of structures such as residences, warehouses, and multi-story buildings. Emphasis is given to the maintenance of an environment that encourages constant moisture conditions in the foundation soils during and following construction. Special attention must always be given to specific requirements of the structure such as limitations on allowable differential movement.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Guidelines of the geotechnical investigation and analysis
      • Field exploration
      • Laboratory investigations
      • Methodology for prediction of volume changes
      • Selection of the type of foundation
      • Structural details of design procedures provided for reference
      • Methods of minimizing foundation movement
      • Construction techniques and inspection Remedial repair of damaged structures

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

     

    Texas

    Professional Development Hours (PDH) Requirements

    Texas professional engineers are required to earn 15 PDH annually. All of the required hours can be earned through online continuing education courses. EZpdh.com courses are accepted by the Texas Board of Professional Engineers. The following table shows a quick rundown of license renewal requirements.

    SubjectRequirement
    Hours Required15 hours annually
    Renewal DatesMarch 31, June 30, September 30 or December 31 based on the initial date of licensure
    Course ApprovalThe Board does not require pre-approval for providers or specific courses. Each engineer must determine whether an activity meets the Board’s requirements
    Course ContentThe course must have a “clear purpose and objective which will maintain, improve, or expand the skills and knowledge relevant to the licensee’s field of practice”At least 1 PDH must be earned in Professional Ethics
    Online CoursesAccepted. For Professional Engineers, there is no limit on the number of PDHs that can be earned through online continuing education.
    PDH CarryoverA maximum of 14 PDH may be carried forward into the next renewal period
    Additional
    1. PDH completion records must be maintained for a minimum of 3 years. EZpdh helps you meet this requirement by providing you with the ability to instantly access and print a certificate upon successful completion of a course. Additionally, your certificates of completion are securely maintained by EZpdh for a minimum of seven years and can be accessed online at any time through your login account
    State WebsiteAccess State Website

    Preview Course: Texas Laws, Rules and Ethics
    Preview Course: Pavement Design
    Preview Course: Foundations in Expansive Soils
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Sale! Civil Engineering Courses
  • Sale! Electrical Engineering Courses

    Texas-Electrical Engineering Package: 15 PDH

    $60.00 Add to cart
    Two Electrical Engineering courses plus Texas Laws, Rules, & Ethics course that will earn 15 PDH guaranteed to be accepted by the Texas Board of Professional Engineers & Land SurveyorsInstructor: Juan Pesante, PE

    Texas – Laws, Rules, & Ethics for Professional Engineers: 3 PDH

    Preview Course: Texas Laws, Rules and Ethics
    In this course the student will study the Texas Board of Professional Engineers Statutes and Rules & Regulations, including Professional Engineering Ethics.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • The engineer’s guidelines for practicing within Texas laws and rules
      • The engineer’s duty to protect the public
      • The engineer’s duty to make objective and truthful statements
      • The engineer’s duty to limit practice to his or her field of competence
      • The engineer’s duty to maintain client confidentiality
      • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Basic Electrical and DC Theory: 9 PDH

    Preview Course: Basic Electrical and DC Theory
    This course also introduces the basic electricity and electrical circuit concepts associated with direct current. Topics include calculation of current, voltage, resistance and power in series, parallel and combination circuits with direct current (DC) power sources.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • How is DC voltage produced and what does an electric circuit consist of
      • What is a rectifier and how half-wave bridge rectifiers differ from full-wave bridge rectifiers
      • What is the difference between a schematic diagram, one-line diagram, block diagram and wiring diagram
      • What is resistivity and how temperature affects the resistance of materials
      • What is the difference between open circuit, close circuit, and short circuit
      • What primary characteristics identify a series, parallel or a combination circuit
      • How to calculate the current and voltage drop in series, parallel or combination circuits
      • How to calculate the equivalent resistance for a series, parallel or combination circuit
      • What is meant by the terms voltage divider and current division
      • How is electron flow theory different from conventional current theory

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 9 professional development hours (PDH) of continuing education.

    AC Theory, Circuits, Generators & Motors: 6 PDH

    Preview Course: AC Theory, Circuits, Generators & Motors
    This course explores the fundamentals of AC circuits, and how, instead of working with pure resistances, the concept of impedance is introduced. AC circuit theory can cause engineers a lot of difficulty; however this course will attempt to make the concept easy to see and understand. Numerous pictures and graphs are used to show the basic fundamentals of how Alternating Current works. This course also details the general theory and equations for AC Circuit analysis, AC generators and AC Motors.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • AC motor theory
      • AC motor construction and operation
      • AC motor applications and usage
      • Transformer theory and design
      • Electronic Measuring devices
      • Instrument construction
      • Distribution systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

     

    Texas

    Professional Development Hours (PDH) Requirements

    Texas professional engineers are required to earn 15 PDH annually. All of the required hours can be earned through online continuing education courses. EZpdh.com courses are accepted by the Texas Board of Professional Engineers. The following table shows a quick rundown of license renewal requirements.

    SubjectRequirement
    Hours Required15 hours annually
    Renewal DatesMarch 31, June 30, September 30 or December 31 based on the initial date of licensure
    Course ApprovalThe Board does not require pre-approval for providers or specific courses. Each engineer must determine whether an activity meets the Board’s requirements
    Course ContentThe course must have a “clear purpose and objective which will maintain, improve, or expand the skills and knowledge relevant to the licensee’s field of practice”At least 1 PDH must be earned in Professional Ethics
    Online CoursesAccepted. For Professional Engineers, there is no limit on the number of PDHs that can be earned through online continuing education.
    PDH CarryoverA maximum of 14 PDH may be carried forward into the next renewal period
    Additional
    1. PDH completion records must be maintained for a minimum of 3 years. EZpdh helps you meet this requirement by providing you with the ability to instantly access and print a certificate upon successful completion of a course. Additionally, your certificates of completion are securely maintained by EZpdh for a minimum of seven years and can be accessed online at any time through your login account
    State WebsiteAccess State Website

  • Sale! Mechanical Engineering Courses

    Texas-Mechanical Engineering Package: 15 PDH

    $60.00 Add to cart
    Two Mechanical Engineering courses plus Texas Laws, Rules, & Ethics course that will earn 15 PDH guaranteed to be accepted by the Texas Board of Professional Engineers & Land SurveyorsInstructor: Seth Grablow, PE

    Texas – Laws, Rules, & Ethics for Professional Engineers: 3 PDH

    Preview Course: Texas Laws, Rules and Ethics
    In this course the student will study the Texas Board of Professional Engineers Statutes and Rules & Regulations, including Professional Engineering Ethics.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • The engineer’s guidelines for practicing within Texas’s laws and rules
      • The engineer’s duty to protect the public
      • The engineer’s duty to make objective and truthful statements
      • The engineer’s duty to limit practice to his or her field of competence
      • The engineer’s duty to maintain client confidentiality
      • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Thermodynamics: 8 PDH

    Preview Course: Thermodynamics
    This course provides a detailed overview of Thermodynamics Principles and Practices including thermodynamic principles in practical industrial, commercial and residential applications. The student will comprehend, analyze and solve various types of practical thermodynamic problems through several case studies. Laws, equations, graphs, charts, tables and diagrams, pertaining to various thermodynamics concepts, are covered and utilized in the analysis and solution of the case study problems.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Energy concepts and extension/application of the law of conservation of energy
      • Conversion of thermal energy to electricity through steam turbines and electric generators
      • Understanding and application of Steam Tables
      • Fundamental and essential concepts such as entropy, enthalpy, heat of fusion, heat of sublimation, latent and sensible heat
      • Thermodynamic processes
      • Heat engine cycles
      • Psychrometric analysis based on psychrometric chart
      • Refrigeration cycle related numerical analysis utilizing Pressure –Enthalpy Charts

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 8 professional development hours (PDH) of continuing education.

    Heat Transfer: 4 PDH

    Preview Course: HeatTransfer
    The transfer of heat is an integral part of many industrial processes. Moreover, heat transfer affects our everyday lives – from an oven heating our dinner to the wind cooling us on a hot summer day. Thus, it is important that the engineer understands how to apply the basic principles of heat transfer to solve real-world problems.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Heat transfer definitions and terminology, including heat flux, thermal conductivity, LMTD, and heat transfer coefficients
      • Conduction and the equivalent resistance formulas
      • Convection and use of the overall heat transfer coefficient
      • Radiant heat transfer, including black bodies, gray bodies and emissivity

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

     

    Texas

    Professional Development Hours (PDH) Requirements

    Texas professional engineers are required to earn 15 PDH annually. All of the required hours can be earned through online continuing education courses. EZpdh.com courses are accepted by the Texas Board of Professional Engineers. The following table shows a quick rundown of license renewal requirements.

    SubjectRequirement
    Hours Required15 hours annually
    Renewal DatesMarch 31, June 30, September 30 or December 31 based on the initial date of licensure
    Course ApprovalThe Board does not require pre-approval for providers or specific courses. Each engineer must determine whether an activity meets the Board’s requirements
    Course ContentThe course must have a “clear purpose and objective which will maintain, improve, or expand the skills and knowledge relevant to the licensee’s field of practice”At least 1 PDH must be earned in Professional Ethics
    Online CoursesAccepted. For Professional Engineers, there is no limit on the number of PDHs that can be earned through online continuing education.
    PDH CarryoverA maximum of 14 PDH may be carried forward into the next renewal period
    Additional
    1. PDH completion records must be maintained for a minimum of 3 years. EZpdh helps you meet this requirement by providing you with the ability to instantly access and print a certificate upon successful completion of a course. Additionally, your certificates of completion are securely maintained by EZpdh for a minimum of seven years and can be accessed online at any time through your login account
    State WebsiteAccess State Website

    Preview Course: Texas Laws, Rules and Ethics
    Preview Course: Thermodynamics
    Preview Course: HeatTransfer
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Sale!

    Texas-Structural Engineering Package: 15 PDH

    $60.00 Add to cart
    Four Structural Engineering courses plus Texas Laws, Rules, & Ethics course that will earn 15 PDH guaranteed to be accepted by the Texas Board of Professional Engineers & Land SurveyorsInstructor: Raymond Bosek, PE

    Texas – Laws, Rules, & Ethics for Professional Engineers: 3 PDH

    Preview Course: Texas Laws, Rules and Ethics
    In this course the student will study the Texas Board of Professional Engineers Statutes and Rules & Regulations, including Professional Engineering Ethics.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

        • The engineer’s guidelines for practicing within Texas’s laws and rules
        • The engineer’s duty to protect the public
        • The engineer’s duty to make objective and truthful statements
        • The engineer’s duty to limit practice to his or her field of competence
        • The engineer’s duty to maintain client confidentiality
        • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Home Builders Guide to Earthquake Resistant Building Design: 5 PDH

    Preview Course: Home Builders Guide to Earthquake Resistant Building Design
    In this course, the student will review Chapters 1-4 from “Homebuilders Guide to Earthquake Resistant Design and Construction”, FEMA 232 – June 2006 prepared by the Building Seismic Safety Council for the Federal Emergency Management Agency of the Department of Homeland Security.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

        • Background & History
        • Above-Code Recommendations
        • International Residential Code & IRC Seismic Design Categories
        • Building Response & Concepts Concerning Site
        • Other Hazards including Coastal Hazards
        • Earthquake Resistant Requirements
        • IRC General Earthquake Limitations
        • Load Path
        • Lateral Capacities
        • House Configuration Irregularities
        • Foundation Requirements including Concrete Foundations & Masonry Foundations
        • Special Soil Conditions
        • Foundation Resistance to Sliding Loads
        • Special Considerations for Cut & Fill Sites
        • Foundation Design and Reinforcement
        • Interior Braced Walls Anchoring
        • Floor Design & Construction including Wood Frame, Cantilevered & Concrete Slab-On-Grade
        • Requirements for Blocking
        • Floor Sheathing

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 5 professional development hours (PDH) of continuing education.

    Design of Heavy Duty Concrete Floor Slabs on Grade: 3 PDH

    Preview Course: Design of Heavy Duty Concrete Floor Slabs on Grade
    This course describes the criteria for the design of concrete floor slabs on grade in buildings for heavy loads. Concrete floor slabs on grade are often subjected to heavy loads in buildings such as wall loads, stationary live loads and moving loads. The entire design procedure is based on a working stress concept. This course will provide the student with the criteria needed to design concrete floor slabs on grade subjected to heavy loads. Design examples are shown to aid in understanding the course material.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

        • The steps required to design a heavy duty concrete floor slab
        • How to determine floor slab requirements for wall loads, stationary wall loads and moving loads
        • How to investigate the subgrade and environmental conditions relevant to the design
        • How to determine the modulus of subgrade reaction for various soils

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Cost Benefit of ICF: 2 PDH

    Preview Course: Cost Benefit of ICF
    This online course is based on a guide that provides cost comparisons of ICF construction to standard residential wood-frame construction, a comprehensive cost analysis of the monthly costs of home ownership for wood-frame and ICF homes, and a detailed discussion regarding many of the structural and energy performance benefits gained through the use of ICFs.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

        • Become familiar with ICF construction
        • Be made aware of the many benefits gained through the use of ICF construction
        • Comparative performance and cost comparison of ICF home vs wood frame home
        • Structral safety and hazard mitigation
        • Energy cost comparison of ICF home

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Structural Design Criteria For Structures Other Than Buildings: 2 PDH

    Preview Course: Structural Design Criteria For Structures Other Than Buildings
    This two hour online course establishes structural design criteria for structures other than buildings, furnishes design guidance for various types of structures, and identifies special considerations with regard to certain materials in specific applications. Structures other than buildings which are covered in this course include the following: bridges; dock and harbor facilities; drainage structures; bulk material structures; water and wastewater structures; and mechanical, electrical, and communication structures. The course materials are based entirely on the Technical Manual TM 5-809-6/AFM 88-3 of Joint Departments of the Army and Air Force USA: Structural Design Criteria for Structures Other Than Buildings.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

        • Know the common building materials used in construction
        • Types of structures used in transportation, water & electrical distribution
        • Support requirements for mechanical systems and bulk materials
        • Design criteria for various types of structures
        • Identify special considerations with regard to certain materials in specific applications.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.
    Texas

    Professional Development Hours (PDH) Requirements

    Texas professional engineers are required to earn 15 PDH annually. All of the required hours can be earned through online continuing education courses. EZpdh.com courses are accepted by the Texas Board of Professional Engineers. The following table shows a quick rundown of license renewal requirements.

    SubjectRequirement
    Hours Required15 hours annually
    Renewal DatesMarch 31, June 30, September 30 or December 31 based on the initial date of licensure
    Course ApprovalThe Board does not require pre-approval for providers or specific courses. Each engineer must determine whether an activity meets the Board's requirements
    Course ContentThe course must have a “clear purpose and objective which will maintain, improve, or expand the skills and knowledge relevant to the licensee's field of practice”At least 1 PDH must be earned in Professional Ethics
    Online CoursesAccepted. For Professional Engineers, there is no limit on the number of PDHs that can be earned through online continuing education.
    PDH CarryoverA maximum of 14 PDH may be carried forward into the next renewal period
    Additional
    1. PDH completion records must be maintained for a minimum of 3 years. EZpdh helps you meet this requirement by providing you with the ability to instantly access and print a certificate upon successful completion of a course. Additionally, your certificates of completion are securely maintained by EZpdh for a minimum of seven years and can be accessed online at any time through your login account
    State WebsiteAccess State Website

  • Thermodynamics: 8 PDH

    Thermodynamics (Ohio Timed): 8 PDH

    $48.00 Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    This course provides a detailed overview of Thermodynamics Principles and Practices including thermodynamic principles in practical industrial, commercial and residential applications. The student will comprehend, analyze and solve various types of practical thermodynamic problems through several case studies. Laws, equations, graphs, charts, tables and diagrams, pertaining to various thermodynamics concepts, are covered and utilized in the analysis and solution of the case study problems.Instructor: Seth Grablow, PE

    This course provides a detailed overview of Thermodynamics Principles and Practices including thermodynamic principles in practical industrial, commercial and residential applications. The student will comprehend, analyze and solve various types of practical thermodynamic problems through several case studies. Laws, equations, graphs, charts, tables and diagrams, pertaining to various thermodynamics concepts, are covered and utilized in the analysis and solution of the case study problems.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Energy concepts and extension/application of the law of conservation of energy
    • Conversion of thermal energy to electricity through steam turbines and electric generators
    • Understanding and application of Steam Tables
    • Fundamental and essential concepts such as entropy, enthalpy, heat of fusion, heat of sublimation, latent and sensible heat
    • Thermodynamic processes
    • Heat engine cycles
    • Pyschrometric analysis based on psychrometric chart
    • Refrigeration cycle related numerical analysis utilizing Pressure –Enthalpy Charts

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 8 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase
  • Thermodynamics: 8 PDH

    Thermodynamics (Ohio Timed): 8 PDH

    $48.00 Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    This course provides a detailed overview of Thermodynamics Principles and Practices including thermodynamic principles in practical industrial, commercial and residential applications. The student will comprehend, analyze and solve various types of practical thermodynamic problems through several case studies. Laws, equations, graphs, charts, tables and diagrams, pertaining to various thermodynamics concepts, are covered and utilized in the analysis and solution of the case study problems.Instructor: Seth Grablow, PE

    This course provides a detailed overview of Thermodynamics Principles and Practices including thermodynamic principles in practical industrial, commercial and residential applications. The student will comprehend, analyze and solve various types of practical thermodynamic problems through several case studies. Laws, equations, graphs, charts, tables and diagrams, pertaining to various thermodynamics concepts, are covered and utilized in the analysis and solution of the case study problems.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Energy concepts and extension/application of the law of conservation of energy
    • Conversion of thermal energy to electricity through steam turbines and electric generators
    • Understanding and application of Steam Tables
    • Fundamental and essential concepts such as entropy, enthalpy, heat of fusion, heat of sublimation, latent and sensible heat
    • Thermodynamic processes
    • Heat engine cycles
    • Pyschrometric analysis based on psychrometric chart
    • Refrigeration cycle related numerical analysis utilizing Pressure –Enthalpy Charts

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 8 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase
  • Thermodynamics: 8 PDH

    Thermodynamics (Ohio Timed): 8 PDH

    $48.00 Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    This course provides a detailed overview of Thermodynamics Principles and Practices including thermodynamic principles in practical industrial, commercial and residential applications. The student will comprehend, analyze and solve various types of practical thermodynamic problems through several case studies. Laws, equations, graphs, charts, tables and diagrams, pertaining to various thermodynamics concepts, are covered and utilized in the analysis and solution of the case study problems.Instructor: Seth Grablow, PE

    This course provides a detailed overview of Thermodynamics Principles and Practices including thermodynamic principles in practical industrial, commercial and residential applications. The student will comprehend, analyze and solve various types of practical thermodynamic problems through several case studies. Laws, equations, graphs, charts, tables and diagrams, pertaining to various thermodynamics concepts, are covered and utilized in the analysis and solution of the case study problems.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Energy concepts and extension/application of the law of conservation of energy
    • Conversion of thermal energy to electricity through steam turbines and electric generators
    • Understanding and application of Steam Tables
    • Fundamental and essential concepts such as entropy, enthalpy, heat of fusion, heat of sublimation, latent and sensible heat
    • Thermodynamic processes
    • Heat engine cycles
    • Pyschrometric analysis based on psychrometric chart
    • Refrigeration cycle related numerical analysis utilizing Pressure –Enthalpy Charts

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a thirty (30) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies eight (8) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase
  • Thermodynamics: 8 PDH

    Thermodynamics (Ohio Timed): 8 PDH

    $48.00 Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    This course provides a detailed overview of Thermodynamics Principles and Practices including thermodynamic principles in practical industrial, commercial and residential applications. The student will comprehend, analyze and solve various types of practical thermodynamic problems through several case studies. Laws, equations, graphs, charts, tables and diagrams, pertaining to various thermodynamics concepts, are covered and utilized in the analysis and solution of the case study problems.Instructor: Seth Grablow, PE

    This course provides a detailed overview of Thermodynamics Principles and Practices including thermodynamic principles in practical industrial, commercial and residential applications. The student will comprehend, analyze and solve various types of practical thermodynamic problems through several case studies. Laws, equations, graphs, charts, tables and diagrams, pertaining to various thermodynamics concepts, are covered and utilized in the analysis and solution of the case study problems.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Energy concepts and extension/application of the law of conservation of energy
    • Conversion of thermal energy to electricity through steam turbines and electric generators
    • Understanding and application of Steam Tables
    • Fundamental and essential concepts such as entropy, enthalpy, heat of fusion, heat of sublimation, latent and sensible heat
    • Thermodynamic processes
    • Heat engine cycles
    • Pyschrometric analysis based on psychrometric chart
    • Refrigeration cycle related numerical analysis utilizing Pressure –Enthalpy Charts

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a thirty (30) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies eight (8) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase
  • Thermodynamics: 8 PDH

    Thermodynamics (Ohio Timed): 8 PDH

    $48.00 Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    This course provides a detailed overview of Thermodynamics Principles and Practices including thermodynamic principles in practical industrial, commercial and residential applications. The student will comprehend, analyze and solve various types of practical thermodynamic problems through several case studies. Laws, equations, graphs, charts, tables and diagrams, pertaining to various thermodynamics concepts, are covered and utilized in the analysis and solution of the case study problems.Instructor: Seth Grablow, PE

    This course provides a detailed overview of Thermodynamics Principles and Practices including thermodynamic principles in practical industrial, commercial and residential applications. The student will comprehend, analyze and solve various types of practical thermodynamic problems through several case studies. Laws, equations, graphs, charts, tables and diagrams, pertaining to various thermodynamics concepts, are covered and utilized in the analysis and solution of the case study problems.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Energy concepts and extension/application of the law of conservation of energy
    • Conversion of thermal energy to electricity through steam turbines and electric generators
    • Understanding and application of Steam Tables
    • Fundamental and essential concepts such as entropy, enthalpy, heat of fusion, heat of sublimation, latent and sensible heat
    • Thermodynamic processes
    • Heat engine cycles
    • Pyschrometric analysis based on psychrometric chart
    • Refrigeration cycle related numerical analysis utilizing Pressure –Enthalpy Charts

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a thirty (30) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies eight (8) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase

State Approvals

All of our online courses comply with the Continuing Professional Competency Guidelines published by the National Council of Examiners for Engineering and Surveying (NCEES) and the International Association for Continuing Education & Training (IACEP), therefore, shall be acceptable to all the state boards requiring mandatory continuing education.
EZ-pdh.com approved provider map of USA for professional engineersKey
Approved Providers Mandatory

This column lists states which require continuing education (CE) be completed with a state approved provider. We are approved in all of the seven states requiring pre-approval. “Click to Verify” button will transfer you to the State Board website listing approved providers. We are listed under Ezekiel Enterprises, LLC or EZpdh.com with POC: Raymond Bosek

Florida:
Approved Provider Number:0006346
(listed as Ezekiel Enterprises, LLC)Click to VerifyArchitecture and Interior Design Approved Provider Number:PVD433(listed as Ezekiel Enterprises, LLC)
Click to Verify
Indiana:
CE Approved Provider CE21800049(listed as Ezekiel Enterprises, LLC)
Click to Verify
Louisiana:
CPD Approved Provider CPD.0000317(listed as Ezekiel Enterprises, LLC)
Click to VerifyMaryland:
Approved Provider(listed as EZpdh.com)
Click to VerifyNew Jersey:
Approved CPC Provider 24GP00009900(listed as EZpdh.com)
Click to VerifyNew York:
NYSED Approved Sponsor #166(listed as Ezekiel Enterprises, LLC)
Click to VerifyNorth Carolina:
Approved Sponsor Number:S-0650(listed as Ezekiel Enterprises, LLC)
Click to Verify

Not Mandatory

This column lists states which DO NOT require continuing education (CE) to be completed with a state approved provider. States transfer responsibility to engineer to determine if the CE is acceptable and the state reserves the right to disallow hours if they determined hours are unacceptable. We recommend to complete CE with only state pre-approved providers

Alabama
Alaska
Arkansas
Delaware
Georgia
Idaho
Illinois
Iowa
Kansas
Kentucky
Maine
Maryland
Michigan
Minnesota
Mississippi
Missouri
Montana
Nebraska
Nevada
New Hampshire
New Mexico
North Dakota
Ohio
Oklahoma
Oregon
Pennsylvania
South Carolina
South Dakota
Tennessee
Texas
Utah
Vermont
Virginia
West Virginia
Wisconsin
Wyoming

Read More about State ApprovalsAre you a Land Surveyor? – Click Here for State Approvals

Scroll to Top