Alaska-Land Surveyors Package: 24 PDH
$144.00 $80.00
Land Surveyor’s Ethics: 2 PDH
In this ethics course the student will understand the standards of professional behavior for adherence to the highest ethical conduct and revisit the emphasis that the holder of a professional license has a direct and vital impact on the safety, health, and welfare of the public.
Public Land Survey Rectangular System: 8 PDH
In this course the student will review the rectangular surveying system which has been used continuously in the United States since 1785. As all facets of this system occasionally come into use, the student will become well versed in the field procedures of conducting an original survey covering both historical and current methods.
Aerial Photogrammetry: 5 PDH
In this course the student will understand procedural guidance, technical specifications, and quality control (QC) criteria for performing aerial photogrammetric mapping activities.
Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors: 4 PDH
This course is an introduction of using sUAS in land surveying. From FAA licensing requirements to common sUAS products and software, with an understanding of these basics a land surveyor can easily get started in using this up and coming technology.
Airborne Topographic LiDAR: 3 PDH
In this course the student will review the principles of Airborne Topographic LiDAR and learn how to utilize methods to employ this technology in the field.
Corner Restoration Fundamentals: 2 PDH
In this course the student will understand the understand federal guidelines of resurveying corner monuments and the procedures and laws to successfully reestablish these boundaries.
Preview Course: Land Surveyor’s Ethics
Preview Course: Public Land Survey: Rectangular System
Preview Course: Aerial Photogrammetry
Preview Course: Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors
Preview Course: Airborne Topographic LiDAR
Preview Course: Corner Restoration Fundamentals
Related Courses
Florida-Electrical Engineering Package w/AFBC: 19 PDH
$140.00$90.00 Add to cartFlorida Approved Provider: 0006346Four Electrical Engineering courses plus Florida Laws & Rules, Florida Ethics and Advanced Florida Building Code Course that will earn 19 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Juan Pesante, PEFlorida Laws & Rules for Professional Engineers: 1 CEH
- Florida Approved Course #0010038
- Approved Course for February 28, 2025 Renewal Deadline
- This course satisfies the one (1) hour laws and rules requirement
In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.Florida Ethics for Professional Engineers: 1 CEH
- Florida Approved Course #0010039
- Approved Course for February 28, 2025 Renewal Deadline
- This course satisfies the one (1) hour ethics requirement
The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.2023 Florida Advanced Building Code: Building – Significant Changes: 1 CEH
- Florida Building Commission Approved Course #1222
- This course satisfies retention of the “Special Qualifications” designation on your licensure record, pursuant to Section 471.0195, Florida Statutes.
This one (1) hour course covers and highlights some of the significant changes and updates in the 2023 8th Edition Florida Building Code: Building (FBC-B) which was recently updated from the 2020 FBC 7th Edition Florida Building Code: Building.Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH
In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.
Energy Storage Technology Cost and Performance: 4 PDH
In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).
Electrical Storage Guide for Electrical Engineers: 5 PDH
This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.
Analysis of National Charging infrastructure for Electric Vehicles: 3 PDH
This courses addresses the fundamental question of how much plug-in electric vehicle (PEV) charging infrastructure is needed in the United States to support both plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs). In this course the student will understand PEV charging infrastructure requirements and analyze a range of plausible scenarios that consider the relationship between the evolution of the PEV fleet and charging infrastructure.
Preview Course: Florida Laws and Rules
Preview Course: Florida Ethics
Preview Course: 2023 Florida Advanced Building Code
Preview Course: CAES and PSH Concepts
Preview Course: Energy Storage Technology Cost and Performance
Preview Course: Electrical Storage Guide for Electrical Engineers
Preview Course: Analysis of National Charging infrastructure for Electric VehiclesAlabama-Civil Engineering Package: 30 PDH
$180.00$90.00 Add to cartSix Civil Engineering courses plus Alabama Laws, Rules & Ethics course that will earn 30 PDH guaranteed to be accepted by the Alabama State Board of Licensure for Professional Engineers and Land Surveyors. Instructor: Raymond Bosek, PEAlabama – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Alabama State Board of Licensure for Professional Engineers and Land Surveyors Laws and Rules, including Professional Engineering Ethics.
Stress and Strain in Soils: 4 PDH
In this course the student will understand the properties and mechanics of soils and accurately calculate the stresses and deformations of soil masses.
Geotechnical Subsurface Exploration for Roadways: 5 PDH
In this course the student will understand the essentials of subsurface explorations for roadways with a comprehensive overview including site preparation, sampling methods, types of testing and methods, as well as standard guidelines and recommendations.
Engineering Description of Soils and Rocks: 4 PDH
In this course the student will understand the engineering characteristics of soils and rocks and to how to properly identify and classify to develop a subsurface profile for site evaluations.
Laboratory Testing for Geotechnical Design and Construction: 5 PDH
In this course the student will understand the intricate details of laboratory testing of subsurface soils and rocks in order to obtain values of their engineering properties necessary for design.
Slope Stability in Embankments and Structures: 5 PDH
In this course the student will understand the design of slope stability in embankments and structures and how to recognize, analyze, and solve slope instability issues encountered.
Approach Roadway Deformations: 4 PDH
In this course the student will understand roadway approach embankment design and construction and methods to mitigate deformations typically seen in these structure, including the infamous “bump” encountered at the approach to structure interface.
Preview Course: Alabama Laws, Rules and Ethics
Preview Course: Stress and Strain in Soils
Preview Course: Geotechnical Subsurface Exploration for Roadways
Preview Course: Engineering Description of Soils and Rocks
Preview Course: Laboratory Testing for Geotechnical Design and Construction
Preview Course: Slope Stability in Embankments and Structures
Preview Course: Approach Roadway Deformations