Maine-Land Surveyors Package: 30 PDH
$90.00
Land Surveyor’s Ethics: 2 PDH
In this ethics course the student will understand the standards of professional behavior for adherence to the highest ethical conduct and revisit the emphasis that the holder of a professional license has a direct and vital impact on the safety, health, and welfare of the public.
Public Land Survey Rectangular System: 8 PDH
In this course the student will review the rectangular surveying system which has been used continuously in the United States since 1785. As all facets of this system occasionally come into use, the student will become well versed in the field procedures of conducting an original survey covering both historical and current methods.
Aerial Photogrammetry: 5 PDH
In this course the student will understand procedural guidance, technical specifications, and quality control (QC) criteria for performing aerial photogrammetric mapping activities.
Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors: 4 PDH
This course is an introduction of using sUAS in land surveying. From FAA licensing requirements to common sUAS products and software, with an understanding of these basics a land surveyor can easily get started in using this up and coming technology.
Airborne Topographic LiDAR: 3 PDH
In this course the student will review the principles of Airborne Topographic LiDAR and learn how to utilize methods to employ this technology in the field.
Construction Surveying Curves: 3 PDH
In this course the student will learns to locate points using angles and distances for establishing curves. An essential tool in construction surveying when determining the line of a curve for road layout or some other type of curved construction.
Description of Lands: 3 PDH
This course provides guidance for documenting accurate boundary descriptions and locations by survey in the standards followed for Executive and public land orders and proclamations.
Corner Restoration Fundamentals: 2 PDH
In this course the student will understand the understand federal guidelines of resurveying corner monuments and the procedures and laws to successfully reestablish these boundaries.
Preview Course: Land Surveyor’s Ethics
Preview Course: Public Land Survey: Rectangular System
Preview Course: Aerial Photogrammetry
Preview Course: Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors
Preview Course: Airborne Topographic LiDAR
Preview Course: Construction Surveying Curves
Preview Course: Description of Lands
Preview Course: Corner Restoration Fundamentals
Related Courses
- Sale!
Idaho-Electrical Engineering Package: 30 PDH
$90.00 Add to cartSix Electrical Engineering courses plus Idaho Laws, Rules & Ethics course that will earn 30 PDH guaranteed to be accepted by the Idaho Board of Licensure of Professional Engineers and Professional Land Surveyors. Instructor: Juan Pesante, PEIdaho – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Idaho Board of Licensure of Professional Engineers and Professional Land Surveyors Laws and Rules including Professional Engineering Ethics.
Design and Development of Hybrid Power Plants: 4 PDH
In this course the student will understand the hybrid power plant and the necessary design and planning details required to ensure reliable and efficient means for power production.
Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH
In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.
Energy Storage Technology Cost and Performance: 4 PDH
In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).
Electrical Storage Guide for Electrical Engineers: 5 PDH
This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.
Electrification-Power System Evolution and Infrastructure Development: 5 PDH
In this course the student will understand Electrification, the shift from non-electric to electric sources of energy at the point of final consumption, and an analysis of the potential impacts of widespread electrification on the evolution of the U.S. electricity system. This course follows the guide: Electrification Futures Study: Scenarios of Power System Evolution and Infrastructure Development for the United States, published by the National Renewable Energy Laboratory.
Best Practices for O&M of Photovoltaic and Energy Storage Systems: 5 PDH
In this course the student will understand how to reduce the cost and improve the effectiveness of operations and maintenance (O&M) for photovoltaic (PV) systems and combined PV and energy storage systems. The course follows the guide: Best Practices for O&M of Photovoltaic and Energy Storage Systems 3rd edition, published by the National Renewable Energy Laboratory.
Preview Course: Idaho Laws, Rules and Ethics
Preview Course: Design and Development of Hybrid Power Plants
Preview Course: CAES and PSH Concepts
Preview Course: Energy Storage Technology Cost and Performance
Preview Course: Electrical Storage Guide for Electrical Engineers
Preview Course: Electrification-Power System Evolution and Infrastructure Development
Preview Course: Best Practices for O&M of Photovoltaic and Energy Storage Systems - Sale!
Arkansas-Mechanical Engineering Package: 30 PDH
$90.00 Add to cartSix Mechanical Engineering courses plus Arkansas Rules, Regulations & Ethics course that will earn 30 PDH guaranteed to be accepted by the Arkansas State Board of Licensure for Professional Engineers and Professional Land Surveyors. Instructor: Seth Grablow, PEArkansas – Rules, Regulations, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Arkansas State Board of Licensure for Professional Engineers and Professional Surveyor Rules and Regulations including Professional Engineering Ethics.
Systems Engineering Fundamentals Part 1: 5 PDH
Part one of a two-part course, this course provides a thorough overview of the systems engineering process and presents a in-depth review of the tools and processes to to develop a system efficiently and effectively and to support that system through its life cycle.
Systems Engineering Fundamentals Part 2: 5 PDH
Part two of a two-part course, this course provides a thorough overview of the systems engineering process and presents a in-depth review of the tools and processes to to develop a system efficiently and effectively and to support that system through its life cycle.
Improving Pumping System Performance: 4 PDH
This course provides a thorough overview of pumping systems and their components and practical guidelines to enhance performance and increase efficiency.
Improving Process Heating System Performance: 4 PDH
This course provides a thorough overview of process heating systems and their components and practical guidelines to enhance performance and increase efficiency.
Improving Steam System Performance: 5 PDH
This course provides a thorough overview of steam systems and their components and practical guidelines to enhance performance and increase efficiency.
Improving Compressed Air System Performance: 4 PDH
This course provides a thorough overview of compressed air systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.
Preview Course: Arkansas Rules, Regulations and Ethics
Preview Course: Systems Engineering Fundamentals Part 1
Preview Course: Systems Engineering Fundamentals Part 2
Preview Course: Improving Pumping System Performance
Preview Course: Improving Process Heating System Performance
Preview Course: Improving Steam System Performance
Preview Course: Improving Compressed Air System Performance
