Nevada-Land Surveyors Package: 30 PDH
Original price was: $180.00.$90.00Current price is: $90.00.
Nevada – Ethics including NV Laws and Rules for Professional Engineers: 4 PDH
Public Land Survey Rectangular System: 8 PDH
In this course the student will review the rectangular surveying system which has been used continuously in the United States since 1785. As all facets of this system occasionally come into use, the student will become well versed in the field procedures of conducting an original survey covering both historical and current methods.
Aerial Photogrammetry: 5 PDH
In this course the student will understand procedural guidance, technical specifications, and quality control (QC) criteria for performing aerial photogrammetric mapping activities.
Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors: 4 PDH
This course is an introduction of using sUAS in land surveying. From FAA licensing requirements to common sUAS products and software, with an understanding of these basics a land surveyor can easily get started in using this up and coming technology.
Airborne Topographic LiDAR: 3 PDH
In this course the student will review the principles of Airborne Topographic LiDAR and learn how to utilize methods to employ this technology in the field.
Construction Surveying Curves: 3 PDH
In this course the student will learns to locate points using angles and distances for establishing curves. An essential tool in construction surveying when determining the line of a curve for road layout or some other type of curved construction.
Description of Lands: 3 PDH
This course provides guidance for documenting accurate boundary descriptions and locations by survey in the standards followed for Executive and public land orders and proclamations.
Preview Course: Nevada Ethics, Statutes & Codes
Preview Course: Public Land Survey: Rectangular System
Preview Course: Aerial Photogrammetry
Preview Course: Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors
Preview Course: Airborne Topographic LiDAR
Preview Course: Construction Surveying Curves
Preview Course: Description of Lands
Related Courses
- Sale!
Delaware-Civil Engineering Package #3: 24 PDH
Original price was: $144.00.$80.00Current price is: $80.00. Add to cartFive Civil Engineering courses plus Delaware Ethics including DE Laws and Rules for Professional Engineers that will earn 24 PDH guaranteed to be accepted by the Delaware's Professional Engineering Licensing Board. Instructor: Raymond Bosek, PEDelaware – Ethics including DE Laws and Rules for Professional Engineers: 4 PDH
This course satisfies the Delaware continuing education requirement of three (3) professional development hours in engineering ethics, (ref. DAPE Guidelines for Maintaining Continuing Professional Competency (CPC) Sec. E1).>In this course the student will study three (3) hours of ethics including one (1) hour of the Delaware Association of Professional Engineers Laws and Rules.Bridge Steels and their Mechanical Properties: 4 PDH
In this course the student will gain a comprehensive understanding of the types, properties, manufacturing processes, and performance characteristics of structural steels used in bridge construction. They will understand how various steel grades are selected based on mechanical properties, environmental conditions, and fabrication needs.
Continuously Reinforced Concrete Pavement: 5 PDH
In this course the student will understand the design, construction, maintenance, and rehabilitation of Continuously Reinforced Concrete Pavement (CRCP). They will grasp the critical principles governing CRCP performance, including crack control, reinforcement detailing, and the role of materials and environmental conditions in long-term pavement behavior.
Curing of Portland Cement Concrete Pavements: 4 PDH
In this course the student will gain detailed, research-based guidance on the curing process for concrete pavements, including pre-construction planning, methods of curing (initial and final), material selection, environmental considerations, and techniques to verify curing effectiveness. It emphasizes best practices to ensure long-term pavement performance and reduce early-life concrete distress.
Engineering Green Streets: 3 PDH
In this course the student will understand how to integrate green infrastructure practices into public rights‑of‑way—roads, alleys, sidewalks and parking areas—to better manage stormwater and too acquire the practical tools to design, implement and maintain effective, context‑sensitive stormwater solutions in transportation corridors.
Ultra-High Performance Concrete (UHPC): 4 PDH
In this course the student will understand the unique properties, design implications, and practical applications of Ultra-High Performance Concrete (UHPC), particularly in bridge infrastructure. They will grasp how UHPC differs from conventional concrete, including its superior strength, durability, and performance in extreme conditions.
- Sale!
Mississippi-Civil Engineering Package: 15 PDH
Original price was: $90.00.$60.00Current price is: $60.00. Add to cartThree Civil Engineering courses plus Mississippi Laws, Rules & Ethics course that will earn 15 PDH guaranteed to be accepted by the Mississippi Board of Licensure for Professional Engineers and Surveyors.Instructor: Raymond Bosek, PEMississippi – Laws, Rules, & Ethics for Professional Engineers: 3 PDH
In this course the student will study the Mississippi Board of Licensure for Professional Engineers and Surveyors Laws and Rules including Ethics.
Stress and Strain in Soils: 4 PDH
In this course the student will understand the properties and mechanics of soils and accurately calculate the stresses and deformations of soil masses.
Engineering Description of Soils and Rocks: 4 PDH
In this course the student will understand the engineering characteristics of soils and rocks and to how to properly identify and classify to develop a subsurface profile for site evaluations.
Approach Roadway Deformations: 4 PDH
In this course the student will understand roadway approach embankment design and construction and methods to mitigate deformations typically seen in these structures, including the infamous “bump” encountered at the approach to structure interface.
