SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand residential and non-residential electric vehicle charging requirements
• Discuss existing vehicle and infrastructure status
• Understand different scenarios of growth
• Explain direct current fast charging growth for corridor charging
• Discuss overall infrastructure changes required for models and estimates

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Explain typical approach roadway deformation problems
• Discuss internal and external deformation
• Understand computation of immediate and consolidation settlements
• Explain deformation design solutions
• Understand construction monitoring and quality assurance

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand standards of O&M of Photovoltaic and Energy Storage Systems
• Discuss prerequisites for a successful O&M program
• Understand dependencies on PV system type, site, and environmental conditions
• Explain system performance and O&M plans
• Discuss system monitoring and O&M implementation strategies
• Discuss estimating PV O&M costs
• Understand PV O&M cost survey information and trends

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss various metal coating types and characteristics
• Explain film-forming mechanisms and binders
• Understand driers, pigments, solvents, and miscellaneous additives
• Explain zinc-rich coatings and VOCs
• Understand powder coating, thermal sprays, galvanizing, etc.

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand current CAES and PSH technologies and their challenges
• Discuss bulk energy storage applications and their requirements
• Discuss novel CAES technologies
• Discuss novel PSH technologies
• Explain the feasibility of these novel technologies
• Discuss technological gaps and barriers and further R&D needs

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand the hybrid power plant
• Discuss hybrid power plant resources and market opportunities
• Discuss plant design and optimization
• Discuss plant control and operation
• Explain hybrid power plant market and technology challenges

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss electricity storage services and benefits
• Understand various forms of current electric storage technologies
• Explain advantages/disadvantages of current electric storage technologies
• Discuss the methodology of evaluating electricity storage
• Discuss storage systems procurement and installation

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand Electrification and what it means for the future
• Discuss end-use technology variations of the U.S. electrical system infrastructure
• Discuss variations on cost, energy consumption, and emissions
• Discuss demand-side flexibility variations
• Explain electric sector variations on system evolution, costs, energy consumption, and emissions

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand energy storage deployments by technology
• Discuss cost and performance metrics of different technologies
• Discuss in-depth parameters of each energy storage technologies
• Explain annualized cost and comparison of the technologies

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss soil descriptions and standards
• Explain soil classification and properties
• Discuss practical aspects of fine-grained and course-grained soils
• Explain rock descriptions and classifications (SPT)
• Understand subsurface profile development

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss preparing for subsurface explorations
• Explain field reconnaissance and setting-up a exploration program
• Discuss sampling techniques and tools
• Explain various tests in addition to the standard penetration test (SPT)
• Understand guidelines for minimum exploration

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand compressed air systems and their components
• Discuss various industrial uses for compressed air
• Explain tools and methods to analyze systems
• Discuss performance enhancements at the system level
• Discuss performance enhancements at the component level
• Understand the economics of the system and systems management approaches

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand process heating systems and applications
• Discuss process heating system components and principles
• Explain process heating assessments and common system problems
• Discuss performance enhancements at the system level
• Discuss performance enhancements at the component level
• Understand the economics of improving process heating

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand pumping systems and pumping applications
• Discuss pumping system components and principles
• Explain pumping assessments and common system problems
• Discuss performance enhancements at the system level
• Discuss performance enhancements at the component level
• Understand the economics of improving pumping systems

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand steam systems and applications
• Discuss steam system components and principles
• Explain steam system assessments and common system problems
• Discuss performance enhancements at the system level
• Discuss performance enhancements at the component level
• Understand the economics of improving steam systems

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Explain common laboratory test methods
• Discuss laboratory testing equipment for soil and rock samples
• Discuss testing procedures
• Explain measured parameters
• Understand common guidelines for testing soils and rocks

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Explain the effects of water on slope stability
• Discuss Factor of Safety in Design
• Understand how to solve slope instability problems
• Explain methods and tools to solve slope instability issues
• Understand methods to improve stability

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Explain selection, design, and production of asphalt materials for sustainability
• Discuss sustainable strategies in asphalt pavement design and construction
• Understand sustainable concepts on preservation/maintenance of asphalt pavements
• Explain asphalt pavement end of life sustainable strategies

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand weight-volume relationships
• Discuss vertical and lateral stress distributions
• Discuss load deformation processes
• Explain strength of soils
• Understand calculating stress and strain

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Explain systems engineering management
• Understand the systems engineering process
• Discuss requirement and functional analysis and allocation
• Discuss systems engineering and the verification process
• Explain the outputs of the systems engineering process
• Understand work breakdown structure and configuration management

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand technical reviews and their roles in systems development
• Discuss applications of trade studies, modeling & simulation, and metrics
• Explain risk management and standards tools and concepts
• Discuss systems engineering planning
• Discuss product improvement strategies
• Explain organizing and integrating systems development
• Understand contractual and management considerations

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss recent electric vehicle studies and analysis
• Understand the existing vehicle and infrastructure status
• Explain residential and non-residential charging and estimates
• Explain corridor charging estimates and models
• Discuss overall infrastructure changes required for models and estimates

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Explain typical approach roadway deformation problems
• Discuss internal and external deformation
• Understand computation of immediate and consolidation settlements
• Explain deformation design solutions
• Understand construction monitoring and quality assurance

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss electricity storage services and benefits
• Understand various forms of current electric storage technologies
• Explain advantages/disadvantages of current electric storage technologies
• Discuss the methodology of evaluating electricity storage
• Discuss storage systems procurement and installation

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies six (6) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss soil descriptions and standards
• Explain soil classification and properties
• Discuss practical aspects of fine-grained and course-grained soils
• Explain rock descriptions and classifications (SPT)
• Understand subsurface profile development

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand the history of fiber optics
• Discuss basic fiber optics systems
• Understand the nature of light propagation and the electromagnetic theory of light
• Explain the properties of light reflection, refraction, diffusion, and absorption
• Explain the basic optical fiber material properties and how optical fibers transmit light
• Explain the ray and mode theories of light propagation along an optical fiber
• Discuss the processes of light attenuation and dispersion
• Understand the structure and components of fiber optic systems

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss preparing for subsurface explorations
• Explain field reconnaissance and setting-up a exploration program
• Discuss sampling techniques and tools
• Explain various tests in addition to the standard penetration test (SPT)
• Understand guidelines for minimum exploration

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand compressed air systems and their components
• Discuss various industrial uses for compressed air
• Explain tools and methods to analyze systems
• Discuss performance enhancements at the system level
• Discuss performance enhancements at the component level
• Understand the economics of the system and systems management approaches

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies six (6) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand pumping systems and pumping applications
• Discuss pumping system components and principles
• Explain pumping assessments and common system problems
• Discuss performance enhancements at the system level
• Discuss performance enhancements at the component level
• Understand the economics of improving pumping systems

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand steam systems and applications
• Discuss steam system components and principles
• Explain steam system assessments and common system problems
• Discuss performance enhancements at the system level
• Discuss performance enhancements at the component level
• Understand the economics of improving steam systems

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies six (6) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Explain common laboratory test methods
• Discuss laboratory testing equipment for soil and rock samples
• Discuss testing procedures
• Explain measured parameters
• Understand common guidelines for testing soils and rocks

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Explain the effects of water on slope stability
• Discuss Factor of Safety in Design
• Understand how to solve slope instability problems
• Explain methods and tools to solve slope instability issues
• Understand methods to improve stability

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand weight-volume relationships
• Discuss vertical and lateral stress distributions
• Discuss load deformation processes
• Explain strength of soils
• Understand calculating stress and strain

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Explain systems engineering management
• Understand the systems engineering process
• Discuss requirement and functional analysis and allocation
• Discuss systems engineering and the verification process
• Explain the outputs of the systems engineering process
• Understand work breakdown structure and configuration management

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand technical reviews and their roles in systems development
• Discuss applications of trade studies, modeling & simulation, and metrics
• Explain risk management and standards tools and concepts
• Discuss systems engineering planning
• Discuss product improvement strategies
• Explain organizing and integrating systems development
• Understand contractual and management considerations

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

Offshore wind turbines harness the energy of the ocean winds and turn it into electricity. This course introduces the basic principles of proposed US offshore wind facilities. The course summarizes a study conducted by EESI of existing European and Asian offshore wind farms. The topics addressed include techinical issues related to marine foundations and structures, transmission issues unique to offshore power generation, political and regulatory issues and the publics perceptions of proposed offshore wind farms. This course demonstrates that offshore wind energy has been successfully implemented in other parts of the world and that the potential for wind farms in U.S. waters is favorable.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Awareness of the basic principles of Offshore Wind Energy
• Awareness of the geographic areas in the U.S. that are canidates for wind farms
• Learn the affects of wind farms on commercial fishing and birds
• Public concerns about offshore wind farms relating to property values, local economy and jobs

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hours (PDH) of continuing education.

This course provides an excellent overview of 1) AC motor theory, applications, and industrial usage, 2) Transformers and transformer design, 3) Instruments and measuring devices, and 4) distribution systems.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• AC motor theory
• AC motor construction and operation
• AC motor applications and usage
• Transformer theory and design
• Electronic Measuring devices
• Instrument construction
• Distribution systems

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies six (6) professional development hours (PDH) of continuing education.

AC circuit theory can cause engineers a lot of difficulty; however this course will attempt to make the concept easy to see and understand. Numerous pictures and graphs are used to show the basic fundamentals of how Alternating Current works. This course also details the general theory and equations for AC Circuit analysis, AC generators and AC Motors.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• AC motor theory
• AC motor construction and operation
• AC motor applications and usage
• Transformer theory and design
• Electronic Measuring devices
• Instrument construction
• Distribution systems

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies six (6) professional development hours (PDH) of continuing education.

The Americans with Disabilities Act (ADA) is a federal civil rights law intended to protect qualified persons with disabilities from discrimination in employment, government services and programs, transportation, public accommodations, and telecommunications. The ADA covers a wide range of legal and regulatory issues with regard to Americans with disabilities. This course will focus on the Americans with Disabilities Act Accessibility Guidelines for Buildings and Facilities (the ADA Accessibility Design Guidelines), with which engineers and architects need to comply when working on new constructions or alterations of existing structures.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• ADA Accessibility Design Guidelines
• General instructions and definitions
• Technical specifications and requirements on elements and spaces
• Specific requirements for restaurants
• Specific requirements for cafeterias
• Specific requirements for medical facilities
• Specific requirements for business facilities
• Specific requirements for lodging facilities
• Specific requirements for libraries
• Specific requirements for transportation facilities

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a thirty (30) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies six (6) professional development hours (PDH) of continuing education.

In this course the student will understand the building requirements of manufactured structures, particularly residential homes in Florida, as well as understand the various fabrication materials used for other advanced building projects.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss building codes & HUD codes for fabricated structures
• Understand the materials & products of manufactured buildings
• Discuss systems & systems testing of manufactured buildings
• Explain the various fabrication products for advanced construction
• Discuss the benefits and drawbacks of each of these fabrication products

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss building codes & HUD codes for fabricated structures
• Understand the materials & products of manufactured buildings
• Discuss systems & systems testing of manufactured buildings
• Explain the various fabrication products for advanced construction
• Discuss the benefits and drawbacks of each of these fabrication products

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies six (6) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss the fundamentals & principles of aerial photogrammetry
• Explain photographic scale, geometry and coordinate system equations
• Discuss operational procedures and standards
• Discuss all aspects of planning
• Explain aerial image acquisition & aerial triangulation
• Understand digital photogrammetric mapping workflow

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss the fundamentals & principles of aerial photogrammetry
• Explain photographic scale, geometry and coordinate system equations
• Discuss operational procedures and standards
• Discuss all aspects of planning
• Explain aerial image acquisition & aerial triangulation
• Understand digital photogrammetric mapping workflow

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Explain what Airborne Topographic LiDAR is
• Understand the principles and methods of operation
• Discuss overall planning concepts
• Discuss LiDAR data processing and report generation

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a ten (10) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Explain what Airborne Topographic LiDAR is
• Understand the principles and methods of operation
• Discuss overall planning concepts
• Discuss LiDAR data processing and report generation

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a ten (10) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

In this course the student will study the Alabama State Board of Licensure for Professional Engineers and Land Surveyors Laws and Rules, including Professional Engineering Ethics. A twenty-five question quiz will test his or her understanding of the subject.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

1. 1. • The engineer’s guidelines for practicing within Alabama's laws and rules
      • The engineer’s duty to protect the public
      • The engineer’s duty to make objective and truthful statements
      • The engineer’s duty to limit practice to his or her field of competence
      • The engineer’s duty to maintain client confidentiality
      • The engineer’s responsibility to the profession

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty-five (25) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

In this course the student will study the Alaska State Board of Registration for Architects, Engineers, and Land Surveyors Statutes and Regulations including Ethics. A twenty-five question quiz will test his or her understanding of the subject.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• The engineer’s guidelines for practicing within Alaska's statutes and regulations
• The engineer’s duty to protect the public
• The engineer’s duty to make objective and truthful statements
• The engineer’s duty to limit practice to his or her field of competence
• The engineer’s duty to maintain client confidentiality
• The engineer’s responsibility to the profession

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty-five (25) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

In this course the student will study the Arkansas State Board of Licensure for Professional Engineers and Professional Surveyor Rules and Regulations including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• The engineer's guidelines for practicing within Arkansas's rules and regulations
• The engineer’s duty to protect the public
• The engineer’s duty to make objective and truthful statements
• The engineer’s duty to limit practice to his or her field of competence
• The engineer’s duty to maintain client confidentiality
• The engineer’s responsibility to the profession

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty-five (25) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Rigid Pavement Layer Configuration
• Design of Base/Subbase For Rigid Pavements
• Materials For Base and Subbase
• Construction and Subbase
• Cost Considerations

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a ten (10) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one (1) professional development hour (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • Describe the best practices for design & construction of bases & subbases
  • Discuss the early use and history of bases & subbases
  • Understand the pavement layer configuration
  • Explain design considerations for bases and subbases
  • Discuss design of bases/subbases layers for rigid pavements
  • Describe the materials utilized for bases & subbases
  • Understand the construction of bases/subbases layers
  • Explain cost considerations
  • Discuss European practices of design and construction with bases & subbases for rigid pavements

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.

Do you know where electricity comes from? To be able to say yes to that question, you must understand a bit about the physics of matter. In this course you’ll learn the basics involving: matter, electron theory, magnetism, electromagnetism, the laws of electrical circuits, series circuits, parallel circuits, series-parallel circuits and the basic electrical formulas.

This course also introduces the basic electricity and electrical circuit concepts associated with direct current. Topics include calculation of current, voltage, resistance and power in series, parallel and combination circuits with direct current (DC) power sources.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• How is DC voltage produced and what does an electric circuit consist of
• What is a rectifier and how half-wave bridge rectifiers differ from full-wave bridge rectifiers
• What is the difference between a schematic diagram, one-line diagram, block diagram and wiring diagram
• What is resistivity and how temperature affects the resistance of materials
• What is the difference between open circuit, close circuit, and short circuit
• What primary characteristics identify a series, parallel or a combination circuit
• How to calculate the current and voltage drop in series, parallel or combination circuits
• How to calculate the equivalent resistance for a series, parallel or combination circuit
• What is meant by the terms voltage divider and current division
• How is electron flow theory different from conventional current theory

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a thirty (30) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies nine (9) professional development hours (PDH) of continuing education.

This electrical training course provides a basic introduction to DC theory, electrical circuits, batteries and DC machinery (motors and generators). This course is essential to electrical engineers to refresh upon the basics and relearn the basic knowledge of electrical principals and equipment usages and applications.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Battery theory and terminology
• Battery operations: series, parallel, primary, seconday, shelf life, etc
• Battery types: wet, dry, alkaline, etc
• Battery harzards
• Inductance
• Capacitance
• DC generator construction
• DC generator theory of operation
• DC generator voltage production, ratings, & losses
• DC motor theory
• DC motor construction and operation

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies six (6) professional development hours (PDH) of continuing education.

In this course the student will understand the distresses caused to concrete by chemical deicers and methods used to minimize this distress.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understanding of the use of chemical anti-icers and deicers
• Discuss how hydraulic cement paste (HCP) is traditionally protected from freeze-thaw damage
• Describe physical and chemical distress mechanisms
• Discuss strategies that can be employed to mitigate this distress

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a ten (10) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one (1) professional development hour (PDH) of continuing education.

This course focuses on the equipment and equipment components used to generate heating and cooling. It does not include fans and pumps. This distinction is clear for most equipment types, such as unit heaters, boilers, and chillers. However, for packaged air-conditioning (AC) equipment the distinction can be subtle. Most packaged AC equipment is treated as a unit by performance rating procedures. Hence, separation of the fans is difficult. For this study, only the refrigerant compressors of packaged equipment are considered.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• To provide an accurate estimate of the energy used by primary cooling and heating equipment in the US commercial building sector
• To provide a physical understanding of the factors, which contribute to energy use by the equipment
• To provide a baseline estimate of current national energy use, which can be used for calculation of the national energy savings impact of various options for reducing energy usage

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss the reasons for protection (shorts, excessive current, heat)
• Explain the functions of fuses and circuit breakers
• Understand the different fuse types
• Understand the different fuse ratings
• Identify fuse designations
• Explain how to check and replace fuses safely
• Identify the different types of circuit breakers
• Understand circuit breaker ratings
• Discuss circuit breaker maintenance

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one professional development hour (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss the concepts of electricity & electronic theory
• Understand electromagnetism and electromotive force
• Understand current, voltage, and resistance in circuits
• Explain DC & AC circuit analysis
• Discuss capacitance and inductance
• Understand DC & AC measuring instruments and concepts
• Explain circuit analysis and troubleshooting circuits

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a thirty (30) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies eight (8) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss the concepts of electricity & electronic theory
• Understand electromagnetism and electromotive force
• Understand current, voltage, and resistance in circuits
• Explain DC & AC circuit analysis
• Discuss capacitance and inductance
• Understand DC & AC measuring instruments and concepts
• Explain circuit analysis and troubleshooting circuits

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a thirty (30) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies eight (8) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Define characteristics of concrete
• Identify ingredients essential for good concrete
• Calculate concrete mix designs
• Determine methods and mixing times of concrete
• Describe the types of concrete forms and their construction
• Determine the types of ties for and placement of reinforcing steel
• Determine the location of construction joints
• Determine proper occasions for using the concrete saw
• Describe the proper procedures for placing concrete
• Describe the methods available for consolidating concrete
• Describe the finishing process for the final concrete surface
• Determine projects suitable for and lifting methods necessary for precast and tilt-up construction

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty-one (21) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies six professional development hours (PDH) of continuing education.

Part I of a two-part series. This course provides guidance on the design and construction of conduits, culverts, and pipes, and the design procedures for trench/embankment earth loadings, highway loadings, railroad loadings, surface concentrated loadings, internal/external fluid pressures, cast-in-place conduits for dams, circular reinforced concrete pipe for small dams and levees, and corrugated metal pipe for rural levees and culverts.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Material selection
• Installation methods
• Loadings
• Method of analysis
• Joints & camber
• Life cycle design

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

Part II of a two-part series. This course provides guidance on the design and construction of conduits, culverts, and pipes, and the design procedures for trench/embankment earth loadings, highway loadings, railroad loadings, surface concentrated loadings, internal/external fluid pressures, cast-in-place conduits for dams, circular reinforced concrete pipe for small dams and levees, and corrugated metal pipe for rural levees and culverts.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Material selection
• Installation methods
• Loadings
• Method of analysis
• Joints & camber
• Life cycle design

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

 

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand & calculate simple horizontal curves
• Explain obstacles to curve locations
• Calculate & discuss Compound and Reverse Curves
• Explain & calculate Transition Spirals
• Discuss & calculate Vertical Curves

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a ten (10) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand & calculate simple horizontal curves
• Explain obstacles to curve locations
• Calculate & discuss Compound and Reverse Curves
• Explain & calculate Transition Spirals
• Discuss & calculate Vertical Curves

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a ten (10) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Explain proportionment problems and methods
• Discuss Property rights and boundaries
• Understand and explain water boundaries
• Discuss non-conventional Cadastral survey

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a ten (10) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Explain proportionment problems and methods
• Discuss Property rights and boundaries
• Understand and explain water boundaries
• Discuss non-conventional Cadastral survey

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a ten (10) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss the importance of using corrosion-resistant metal connectors and fasteners in coastal areas
• Discuss regulations and codes in corrosion resistance material selection for fasteners
• Explain the causes of corrosion in coastal areas
• Understand types of corrosion-resistant metal connectors and fasteners
• Explain best practices for corrosion resistance

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) continuing education hour (CEH)/professional development hour (PDH) of continuing education.

This online course is based on a guide that provides cost comparisons of ICF construction to standard residential wood-frame construction, a comprehensive cost analysis of the monthly costs of home ownership for wood-frame and ICF homes, and a detailed discussion regarding many of the structural and energy performance benefits gained through the use of ICFs.

The student must take a multiple-choice quiz consisting of ten (10) questions at the end of this course to earn PDH credits.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Become familiar with ICF construction
• Be made aware of the many benefits gained through the use of ICF construction
• Comparative performance and cost comparison of ICF home vs wood frame home
• Structral safety and hazard mitigation
• Energy cost comparison of ICF home

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a ten (10) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Explain analysis and design methods of concrete decks
• Understand the different types of precast deck slabs and placement sequence
• Describe formwork and methods
• Describe metal grid decks and design considerations
• Understand design & construction methods of metal grid decks
• Describe orthotropic steel decks and design considerations
• Understand design & construction methods of orthotropic steel decks
• Explain wood decks and the various types
• Describe other types of deck systems and design consideration

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty-one (21) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four professional development hours (PDH) of continuing education.

This course satisfies the Delaware continuing education requirement of two (2) professional development hours in engineering ethics, (ref. DAPE Guidelines for Maintaining Continuing Professional Competency (CPC) Sec. E1).

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • The engineer’s guidelines for practicing within Delaware’s laws and rules
  • The engineer’s duty to protect the public
  • The engineer’s duty to make objective and truthful statements
  • The engineer’s duty to limit practice to his or her field of competence
  • The engineer’s duty to maintain client confidentiality
  • The engineer’s responsibility to the profession

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a thirty (30) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss land descriptions
• Explain the public land survey system
• Discuss metes-and-bounds surveys
• Discuss lot and block descriptions
• Explain illustrations and coordinates
• Understand form and arrangement

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a ten (10) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• General tunnel design parameters
• Alternative analyses
• Tunnel studies
• Operation and financial planning
• Geometric configurations
• Geotechnical investigations
• Geotechnical Reports

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a thirty (30) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Cut and cover tunnels
• Rock Tunneling
• Softground tunneling
• Difficult ground tunneling
• Structural design and subsystems
• Groundwater control
• Tunnel support design
• Permanent lining design
• Soil stabilization
• Instability and heaving loads

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a thirty (30) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Sequential excavation method
• Tunnel lining
• Immersed tunnels
• Jacked box tunneling
• Ground classsification
• Instrumentation and monitoring
• Construction methodolgies
• Ground control and watertightness

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a thirty (30) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Seismis considerations and evaluation
• Tunnel construction engineering
• Staging and sequencing
• Instrumentation
• Gorund movements and groundwater behavior
• Tunnel Rehabilation
• Structural and lining repairs

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty-five (25) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • Identify factors which contribute to construction injuries and fatalities
  • Explain how to analyze work sites for hazards
  • Discuss the hierarchy of controls for construction hazards
  • Provide methodology and examples of how appropriate design features can eliminate or reduce the risk of an injury

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies one (1) professional development hours (PDH) of continuing education.

This course provides guidance to engineers in methods to mitigate the effects of hazards resulting from terrorist attacks on new buildings. While focusing primarily on explosive attacks and design strategies to mitigate the effects of explosions, the course also addresses design strategies to mitigate the effects of chemical, biological and radiological attacks. In addition to the applicability to the design of new commercial office, retail, multi-family residential, and light-industrial buildings, many of the concepts presented are also applicable to other building types and/or existing buildings.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Design strategies to enhance life safety of building occupants
• Incremental steps to produce fully developed security measures
• Multi-disciplinary approach to security design
• Complex trade-offs required when designing security into a building

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

This course describes the criteria for the design of concrete floor slabs on grade in buildings for heavy loads. Concrete floor slabs on grade are often subjected to heavy loads in buildings such as wall loads, stationary live loads and moving loads. The entire design procedure is based on a working stress concept. This course will provide the student with the criteria needed to design concrete floor slabs on grade subjected to heavy loads. Design examples are shown to aid in understanding the course material.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• The steps required to design a heavy duty concrete floor slab
• How to determine floor slab requirements for wall loads, stationary wall loads and moving loads
• How to investigate the subgrade and environmental conditions relevant to the design
• How to determine the modulus of subgrade reaction for various soils

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

Proper design, construction, and maintenance of hydraulic steel structures (HSS) is imperative for safe operation and reliable service over the structure’s lifetime. Engineers charged with the responsibility of maintaining these structures must be familiar with the basics of HSS design, as well as the intricacies of the structure’s abilities and limitations. This 4 hour interactive course prescribes guidance for (a) designing hydraulic steel structures (HSS) by load and resistance factor design (LRFD) and (b) fracture control. Allowable stress design (ASD) guidance is provided as an alternative design procedure or for those structure types where LRFD criteria have yet to be developed. Hydraulic steel structures are lock gates, tainter gates, tainter valves, bulkheads and stoplogs, vertical lift gates, components of hydroelectric and pumping plants, and miscellaneous structures such as lock wall accessories, local flood protection gates, and outlet works gates. HSS may be subject to submergence, wave action, hydraulic hammer, cavitation, impact, corrosion, and severe climatic conditions.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss the benefits of the LRFD method over the ASD method of designs
• List the modes of failure for HSS and what design principles are used to address these issues
• Describe the types of HSS and their corresponding uses and allowable stress loads
• Name the different types of HSS connections, including their design specifications and appropriate uses

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

This course focuses on criteria for water source development, design of small water supply, treatment, and distribution systems. This professional engineer online course is from the U.S. Army Corps of Engineers manual on the Design of Small Water Systems. This manual provides information of interest to planners and designers of small water systems. The major emphasis of this course is on the design of systems that will be effective and reliable, requiring a level of operation and management activity commensurate with their physical size and the available sources.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Preliminary Water System Planning and Design Considerations
• Water Quality Requirements (State, EPA, local)
• Water Quantity Requirements
• Water Source Options and Source Development
• Water Treatment Unit Operations such as Disinfection, Iron Removal
• Manganese Removal, Hardness Removal, Taste and Odor Removal
• Stability and Corrosion Control, Turbidity Removal, Color Removal, and many other technologies and their applications

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

In this course the student will learn the essentials of a Design-Build project delivery system. The traditional approach for construction projects consists of the appointment of a designer on one side, and the appointment of a contractor on the other side. The design–build procurement route changes the traditional sequence of work. It answers the client’s wishes for a single point of responsibility for both development of the design and project construction to effectively reduce risks and costs and speed-up final delivery.

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

A basic understanding of the underlying causes of concrete deficiencies is essential to performing meaningful evaluations which lead to the proper selection of the method or technique used to successfully repair concrete. Symptoms or observations of a deficiency must be differentiated from the actual cause of the deficiency, and it is imperative that causes and not symptoms be addressed in repairs. Deterioration of concrete is an extremely complex subject since, in most cases, the damage detected will be the result of more than one mechanism.

In this course, the student will review Chapter 3, Causes of Distress and Deterioration of Concrete from Engineer Manual (EM) 1110-2-2002, “Engineering and Design – Evaluation and Repair of Concrete Structures” published by the U.S. Army Corp of Engineers (issued 30 June 1995). This course is most relevant to engineers wishing to attain knowledge on the most common causes of problems in concrete. The course also provides a brief description of the basic mechanism of each common problem, a description of the typical symptoms that would be observed during a visual inspection, and suggests preventative methods or techniques to prevent further damage.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Common causes of concrete deterioration
• Symptoms of concrete distress and deterioration that can be found during visual inspections
• Preventative measures to reduce or eliminate further concrete degradation.

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a ten (10) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • Describe Diesel Engine Operation both 2 and 4 stroke
  • Discuss the history & background of diesel engines
  • Understand the functions of different components and subsystems of a diesel engine
  • Describe typical terminology and design features
  • Discuss Engine Fuel Control and speed control design operations
  • Explain the engine protection system and components

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1.5 professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Identifying distresses in different surfaces
• Understanding and identifying the severity levels
• How to measure the distresses
• Methods to document /li>

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• The engineer's guidelines for practicing within DC's laws and rules
• The engineer’s duty to protect the public
• The engineer’s duty to make objective and truthful statements
• The engineer’s duty to limit practice to his or her field of competence
• The engineer’s duty to maintain client confidentiality
• The engineer’s responsibility to the profession

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Explain durability and critical areas of concern on residential structures
• Understand the negative effects of ground water, rain water, and water vapor
• Discuss HVAC and plumbing designs for durability/li>
• Discuss effects of solar radiation and mitigation techniques
• Explain decay, corrosion, and natural hazards effects and solutions for durability

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies six (6) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Explain durability and critical areas of concern on residential structures
• Understand the negative effects of ground water, rain water, and water vapor
• Discuss HVAC and plumbing designs for durability/li>
• Discuss effects of solar radiation and mitigation techniques
• Explain decay, corrosion, and natural hazards effects and solutions for durability

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss the US Electric Grid system and its history
• Understand the functions and concepts of electric power system operations
• Discuss FERC and the Energy Policy Act of 2005
• Discuss the electric reliability organization
• Explain reliability standards and standard’s development
• Explain reliability compliance, enforcement, and assessments

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss the US Electric Grid system and its history
• Understand the functions and concepts of electric power system operations
• Discuss FERC and the Energy Policy Act of 2005
• Discuss the electric reliability organization
• Explain reliability standards and standard’s development
• Explain reliability compliance, enforcement, and assessments

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

This online course includes specific requirments for poles and structures, pole mounted equipment, and aerial lines. This course is intended for electrical engineers and electrical maintenance technicians interested in safe working conditions handling aerial electrical power distribution lines. Requirments addressed for aerial line work, include pole handling and erection, climbing and working on poles, stringing of lines, working around pole-mounted lighting and other equipment, tool handling, tree and brush trimming adjacent to an aerial line right of way.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Have a better understanding of pole handling operations, pole installation, replacement and removal
• Learn about ground handling of poles
• Requirements for poles
• Understand the gin pole method
• General rules for pole climbing
• Proper procedure for sharpening gaffs
• How to work safely on crossing structures
• Understand the importance of tree trimming and brush removal
• Know the terminology of aerial rope use

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss a brief history of energy storage
• Understand electrical energy time-shift and supply capacity
• Discuss transmission infrastructure of energy storage
• Understand customer energy management services

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss a brief history of energy storage
• Understand electrical energy time-shift and supply capacity
• Discuss transmission infrastructure of energy storage
• Understand customer energy management services

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

The purpose of this course is to familiarize engineers with emergency and standby internal combustion diesel engine-generator set power systems under 600V. This course can serve as an introduction to emergency and standby power systems and applications for engineers with little or no professional electrical design experience. The course also presents practical emergency and standby power system application information that will benefit even the most seasoned electrical design professional.

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • Understanding of what is a Connected Vehicle
  • Discuss the US DOT connected vehicle programs and partnerships between public & private entities
  • Describe the many technologies and common components
  • Explain the various issues of implementing connected vehicles

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies one (1) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand the workings of cool roofs
• Identify the different types of cool roof materials
• Discuss cool roof selection and climate zones
• Explain cool roofs new construction & modifying existing buildings

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a ten (10) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one (1) continuing education hour (CEH)/professional development hour (PDH) of continuing education.

This focuses on the measured energy performance for 121 LEED New Construction buildings, and compares the data to a variety of benchmarks, including Commercial Building Energy Consumption Survey (CBECS) averages, Energy Star ratings and modeled energy performance estimates provided with LEED submittals.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Recognize how energy performance of the sample set of buildings was evaluated
• Understand energy savings of LEED certified buildings
• Discern the accuracy of energy models
• Discern the accuracy of building specific energy models
• Interpret the strength and weeknesses of using LEED

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a ten (10) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss environmental factors that affect corrosion
• Understand the eight major forms of corrosion
• Discuss corrosion characteristics and properties of various common metals
• Explain corrosion protection and methods of control
• Discuss monitoring of corrosion and available inspection technologies
• Understand the electrochemistry, kinetics, and thermodynamics of the corrosion process

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a thirty (30) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies nine (9) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss environmental factors that affect corrosion
• Understand the eight major forms of corrosion
• Discuss corrosion characteristics and properties of various common metals
• Explain corrosion protection and methods of control
• Discuss monitoring of corrosion and available inspection technologies
• Understand the electrochemistry, kinetics, and thermodynamics of the corrosion process

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a thirty (30) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies eight (8) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Understand the health hazards of cross-connections
• Discuss various real-life mishaps
• Discuss cross-connections risk mitigation
• Explain programs for cross-connection control and backflow prevention
• Understand common cross-connection scenarios and methods to mitigate

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) continuing education hour (CEH)/professional development hour (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • Learn what means to build “Green” and the many benefits it offers
  • Understand a comprehensive list of design & building considerations to be examined during a build
  • Discuss the numerous materials & processes which can be applied during a Green building project
  • Review a comprehensive green building checklist to easily identify areas to apply Green Building principles

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies two (2) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • Learn what means to build “Green” and the many benefits it offers
  • Explain the attributes of various materials and building products used for Green building
  • Understand a comprehensive list of design & building considerations to be examined during a build

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies one (1) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • Discuss the time value of money as it relates to engineering economics
  • Describe interest rates and it effects
  • Discuss the various analysis tools utilized to solve economic problems
  • Understand discrete compounding factors and how to use them
  • Understand continuous compounding factors and how to use them
  • Describe the evaluation methods for selection of alternatives
  • Discuss taxes and depreciation

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 2 professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss the human body, human heat transfer, and thermal comfort
• Understand design conditions for heating and cooling
• Understand heat gain, heat loss, and heat transfer of people and equipment
• Explain solar heat gain and transfer
• Discuss infiltration heat load and weatherizing
• Understand calculating heating and cooling requirements
• Understand annual energy consumption of a building

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty-five (25) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies seven (7) professional development hours (PDH) of continuing education.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss the human body, human heat transfer, and thermal comfort
• Understand design conditions for heating and cooling
• Understand heat gain, heat loss, and heat transfer of people and equipment
• Explain solar heat gain and transfer
• Discuss infiltration heat load and weatherizing
• Understand calculating heating and cooling requirements
• Understand annual energy consumption of a building

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a twenty-five (25) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies seven (7) professional development hours (PDH) of continuing education.