Mechanical Engineering

  • Engineer’s Guide to Cross Connection Control: 4 PDH

    $24.00 Add to cart
    In this online course a student will understand cross connection risks, review real case studies of cross connection mishaps, and understand the various methods and procedures to mitigate cross connection hazards.
    Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand the health hazards of cross-connections
    • Discuss various real-life mishaps
    • Discuss cross-connections risk mitigation
    • Explain programs for cross-connection control and backflow prevention
    • Understand common cross-connection scenarios and methods to mitigate

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) continuing education hour (CEH)/professional development hour (PDH) of continuing education.

    Preview Course
    Click” Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Essentials of Heating and Cooling of Buildings: 7 PDH

    $40.00 Add to cart
    In this course the student will understand all elements effecting heating and cooling of structures and to properly calculate loads and loss for ideal thermal comfort.Instructor: Seth, Grablow PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the human body, human heat transfer, and thermal comfort
    • Understand design conditions for heating and cooling
    • Understand heat gain, heat loss, and heat transfer of people and equipment
    • Explain solar heat gain and transfer
    • Discuss infiltration heat load and weatherizing
    • Understand calculating heating and cooling requirements
    • Understand annual energy consumption of a building

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty-five (25) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies seven (7) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Fasteners 1.5 PDH (On-Demand Webinar)

    $15.00 Add to cart
    This course presents an in-depth look at steel fasteners. A broad range of topics will be discussed including fastener strength, thread design , applications, properties and tensioning methods. This course will go beyond the standards and specifications and provide engineers with a thorough understanding of fasteners and fastener design and applications as well as helpful background information.
    Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain the basics of bolting
      • Gain an understanding of the materials and properties of steel fasteners
      • Become familiar with fastener construction & coatings
      • Understand fastener design criteria and applications
      • Discuss practical tensioning methods

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1.5 professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the On-demand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
    You may print or save your certificate or access anytime within your account.

  • Fluid Flow: 4 PDH

    Fluid Flow: 4 PDH

    $24.00 Add to cart
    Fluid flow and practical fluid mechanics is essential to any engineer's knowledge base. This course will overview the basic principles of fluid flow including the three key attributes to solve all fluid problems. Bernoulli Equation will be discussed in detail to enable understanding of different types of energy in a fluid stream. Laminar and turbulent flow, head loss, and factors affecting head loss will also be dicussed in detail and explained with practical problems.Instructor: Seth Grablow, PE

    Fluid flow and practical fluid mechanics is essential to any engineer's knowledge base. This course will overview the basic principles of fluid flow including the three key attributes to solve all fluid problems. Bernoulli Equation will be discussed in detail to enable understanding of different types of energy in a fluid stream. Laminar and turbulent flow, head loss, and factors affecting head loss will also be dicussed in detail and explained with practical problems.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Review of key principles
    • Shear Stress in a fluid
    • Conservation of Mass
    • Conservation of Momentum
    • Reynolds number
    • Laminar versus turbulent flow
    • Bernoulli Equation
    • Major head losses
    • Minor head losses
    • System level analysis
    • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Fundamentals of Biodiesel: 4 PDH

    $24.00 Add to cart
    In this online course a student will understand biodiesel and biodiesel blends and practical guidelines for using in place of standard diesel, this includes characteristics, storage and safety issues, and procedures for using in compression-ignition engines and boilers.
    Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand biodiesel and biodiesel blends
    • Explain biodiesel benefits and attributes
    • Discuss biodiesel blends and characteristics
    • Explain safety, health, & environmental issues with biodiesel
    • Understand storage and material compatibility

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) continuing education hours (CEH)/professional development hours (PDH) of continuing education.

    Preview Course
    Click” Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Fundamentals of Gas Turbine Engines: 5 PDH

    $30.00 Add to cart
    This course provides an overview of the development of gas turbines, operational theory, Brayton cycle, conditions and design limitations that affect performance, types of turbine engines and components utilized in a gas turbine engine.Instructor: Seth Grablow, PE

    Concepts for machines that harness power from heated air or water have been around since the 1600s. From this beginning, the gas turbine engine now is at the center of major industries including: aviation, naval propulsion, and power generation. This course provides an overview of the development of gas turbines, operational theory, Brayton cycle, conditions and design limitations that affect performance, types of turbine engines and components utilized in a gas turbine engine.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • History of development of the gas turbine
    • Basic gas turbine engine operation theory, Brayton Cycle
    • Factor affecting engine performance
    • Types of gas turbine engines
    • Components of a gas turbine engine
    • Gas turbine engine auxiliary systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty-five (25) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Fundamentals of Metals: 8 PDH

    Fundamentals of Metals: 5 PDH

    $30.00 Add to cart
    The course provides an understanding of the structure and properties of metals, stress mechanisms, failure modes and the characteristics determine their usefulness for a specific application. Often, materials are subject to variable forces (loads). The engineer calculates these forces to establish the service that can be expected and material scientists experiment to determine how materials deform (elongate, compress, and twist) or break as a function of applied load, time, temperature, and other conditions.
    Instructor: Seth Grablow, PE

    The course provides an understanding of the structure and properties of metals, stress mechanisms, failure modes and the characteristics determine their usefulness for a specific application. Often, materials are subject to variable forces (loads). The engineer calculates these forces to establish the service that can be expected and material scientists experiment to determine how materials deform (elongate, compress, and twist) or break as a function of applied load, time, temperature, and other conditions.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Mechanical properties of metals
    • Structure of metals and how those structures are affected by various processes
    • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

       

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Fundamentals of Pumps: 4 PDH

    $24.00 Add to cart
    This online course provides an overview of centrifugal and positive displacement pumps, pump components, protection, and operational considerations. Pumps serve in a wide range of applications, from industrial uses such as pumping oil or natural gas, to consumer uses in vehicles or decorative fountains. Knowledge of the different designs of pumps can be used when selecting them for use in a system.
    Instructor: Seth Grablow, PE
    This online course provides an overview of centrifugal and positive displacement pumps, pump components, protection, and operational considerations. Pumps serve in a wide range of applications, from industrial uses such as pumping oil or natural gas, to consumer uses in vehicles or decorative fountains. Knowledge of the different designs of pumps can be used when selecting them for use in a system.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Centrifugal Pump Design and Classification
    • Pump Operation and Protection
    • Cavitation Prevention
    • Positive Displacement Pump Design and Classification

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Fundamentals of Valves: 4 PDH

    $24.00 Add to cart
    Valves are a ubiquitous feature in many industrail facilities. As Valves make up the most common single piece of equipment found in industrial facilities familiarity with valves is useful practical knowledge. This course will provide an overview of the common components of valves, types of valves usage, design considerations, and actuation methods.
    Instructor: Seth Grablow, PE

    Valves are a ubiquitous feature in many industrail facilities. As Valves make up the most common single piece of equipment found in industrial facilities familiarity with valves is useful practical knowledge. This course will provide an overview of the common components of valves, types of valves usage, design considerations, and actuation methods.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Valve Functions
    • Basic Parts of Valves
    • Different Types of Values (Usage and Design)
    • General Design Considerations when using valves
    • Types of Valve Actuators

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty-five (25) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Heat Exchangers Fundamentals: 4 PDH

    $24.00 Add to cart
    Heat Exchangers are a vital part to many industrial and consumer systems. They can be found anywhere from power plants and breweries to cars and HVAC systems. Heat Exchangers are vital for transferring heat from or between fluids. Knowledge of the fundamentals behind the use and design is vital to anyone involved with mechanical systems. This course reviews the practical applications of thermodynamics, heat transfer, and fluid flow principles covered in other PDH courses.Instructor: Seth Grablow, PE

    Heat Exchangers are a vital part to many industrial and consumer systems. They can be found anywhere from power plants and breweries to cars and HVAC systems. Heat Exchangers are vital for transferring heat from or between fluids. Knowledge of the fundamentals behind the use and design is vital to anyone involved with mechanical systems. This course reviews the practical applications of thermodynamics, heat transfer, and fluid flow principles covered in other PDH courses.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Methods of Constructing Heat Exchangers
    • Types of Heat Exchangers
    • Review Rate of Heat Transfer equations
    • Applications of Heat Exchangers

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Heat Transfer: 4 PDH

    Heat Transfer: 4 PDH

    $24.00 Add to cart
    The transfer of heat is an integral part of many industrial processes. Moreover, heat transfer affects our everyday lives – from an oven heating our dinner to the wind cooling us on a hot summer day. Thus, it is important that the engineer understands how to apply the basic principles of heat transfer to solve real-world problems.Instructor: Seth Grablow, PE

    The transfer of heat is an integral part of many industrial processes. Moreover, heat transfer affects our everyday lives – from an oven heating our dinner to the wind cooling us on a hot summer day. Thus, it is important that the engineer understands how to apply the basic principles of heat transfer to solve real-world problems.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Heat transfer definitions and terminology, including heat flux, thermal conductivity, LMTD, and heat transfer coefficients
    • Conduction and the equivalent resistance formulas
    • Convection and use of the overall heat transfer coefficient
    • Radiant heat transfer, including black bodies, gray bodies and emissivity
    • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Improving Energy Efficiency in Historic Buildings: 2 PDH

    $12.00 Add to cart
    In this course the student will learn the general concept of the most efficient methods to enhance energy efficiency of historic buildings, while limiting the damage done during the rehabilitation process.
    Instructor: Raymond Bosek, PE
    In this course the student will learn the general concept of the most efficient methods to enhance energy efficiency of historic buildings, while limiting the damage done during the rehabilitation process.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Inherent energy efficient features of historic buildings
    • Concept of conducting an energy audit
    • Actions to improve energy efficiency
    • Dealing with moisture
    • Applicable alternative energy sources

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a ten (10) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Improving Fan System Performance: 4 PDH

    $24.00 Add to cart
    In this online course a student will understand fan systems, their components and operation, and various methods and guidelines to improve the performance for new or existing systems.
    Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand the basics industrial fan systems and components
    • Identify fan selection and efficiency
    • Discuss basic maintenance and common problems
    • Explain configurations to improve fan efficiency
    • Understand fan control and arrangements
    • Explain fan economics and calculations used

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) continuing education hours (CEH)/professional development hours (PDH) of continuing education.

    Preview Course
    Click” Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Introduction to Mechanical Components: 1.5 PDH (On-Demand Webinar)

    $15.00 Add to cart
    Along with pumps and valves, reviewed in separate PDH courses, there are many other components that can be found in an industrial/power generation setting. Knowledge of these systems can be useful to any engineer. This online course provides a brief overview of air compressors, hydraulics, boilers, cooling towers, and other components likely to be installed in an industrial facility.
    Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Describe the general mechanical components of industrial and power generation facilities
      • Discuss the various types of air compressors, cooling towers, demineralizers, stem traps, etc.
      • Describe the different features and configurations of these components
      • Explain the safety hazards associated with these components

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1.5 professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the On-demand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
    You may print or save your certificate or access anytime within your account.

  • Introduction to Mechanical Components: 4 PDH

    $24.00 Add to cart
    Along with pumps and valves, reviewed in seperate PDH courses, there are many other components that can be found in an industrial/power generation setting. Knowledge of these systems can be useful to any engineer. This online course provides a brief overview of air compressors, hydraulics, boilers, cooling towers, and other components likely to be installed in an industrial facility.Instructor: Seth Grablow, PE

    Along with pumps and valves, reviewed in seperate PDH courses, there are many other components that can be found in an industrial/power generation setting. Knowledge of these systems can be useful to any engineer. This online course provides a brief overview of air compressors, hydraulics, boilers, cooling towers, and other components likely to be installed in an industrial facility.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Air Compressors
    • Hydraulics
    • Boilers
    • Cooling Towers
    • Demineralizers
    • Pressurizers
    • Steam Tramps
    • Filters and Strainers
    • Basic operations and functions of these components
    • Features typical to these components

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a sixteen (16) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Jet Turbine Engine Fundamentals course image

    Jet Turbine Engine Fundamentals: 1 PDH

    $6.00 Add to cart
    In this course the student will learn the basic components and operation of modern gas turbine engines used in aviation.Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the various major components of a gas turbine engine
    • Explain the functions of each major component
    • Understand basic construction and material selection for each major component
    • Identify the pros/cons of each type of engine

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one professional development hour (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Mechanical Systems Commissioning: 6 PDH

    $36.00 Add to cart
    In this course the student will learn the various benefits commissioned mechanical equipment has to a facility by understanding the procedures in developing a commissioning program for mechanical equipment and the detailed processes effective in verifying proper system installation.Instructor: Seth, Grablow PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the need for commissioning mechanical equipment
    • Understand the commissioning process
    • Explain commissioning of HVAC equipment
    • Explain commissioning of Generators And Ancillary Equipment
    • Explain commissioning of Air Compressors And Pneumatic Control Systems
    • Explain commissioning of Fire Suppression Systems
    • Explain commissioning of Cranes And Elevators
    • Explain commissioning of Water And Sewage Treatment Systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies six (6) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Microturbine Generators: 1 PDH

    $6.00 Add to cart
    In this online course a student will understand microturbine generators, how they work, their performance characteristics, and what applications can benefit from this combined power & heat technology.
    Instructor: Juan Pesante, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain what microturbines are and how they function
    • Discuss the basics components of microturbines
    • Discuss part-load performance
    • Explain effects of ambient conditions on performance
    • Understand microturbine capital costs
    • Discuss suitable applications for microturbines

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a ten (10) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one (1) continuing education hour (CEH)/professional development hour (PDH) of continuing education.

    Preview Course
    Click” Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Modern Heat Pumps: 1PDH (On-Demand Webinar)

    $10.00 Add to cart
    In this course the engineer will be introduced to modern heat pumps and their applications. This introductory course will enable the students to understand the basics of the latest heat pump technologies and how to apply to multiple applications.
    Instructor: Seth Grablow, PE
    In this course the engineer will be introduced to modern heat pumps and their applications. This introductory course will enable the students to understand the basics of the latest heat pump technologies and how to apply to multiple applications.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Basic A/C and Heat Pump cycles
      • Residential/commerical Heat pump applications and rating heat pumps
      • Overview of Variable Refrigerant Flow (VRF) heat pumps
      • Overview of Variable Refrigerant Volume (VRV) heat pumps
      • Using modern heat pumps for LEED certifications

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies one (1) professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the On-demand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
    You may print or save your certificate or access anytime within your account.

  • Pumped Storage Hydropower and Conduit Hydropower: 1 PDH

    $6.00 Add to cart
    In this online course a student will learn about the different ways pumped storage hydropower and conduit hydropower can enhance renewable energy portfolio's, the steps necessary to develop this new technology, and the common barriers encountered for deployment.
    Instructor: Seth Grablow, PE

    In this online course a student will learn about the different ways pumped storage hydropower and conduit hydropower can enhance renewable energy portfolio's, the steps necessary to develop this new technology, and the common barriers encountered for deployment.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understanding of pumped storage hydropower
    • Understanding of potential hydropower from conduits
    • Addresses the technical flexibility that existing pumped storage facilities can provide to support intermittent renewable energy generation
    • Describing grid reliability benefits
    • Understanding the differences between Pumped storage hydropower and conduit hydropower
    • Safety aspects of constructing conduit hydropower projects on existing water-conveyance structures
    • Current status and the future outlook for PSH in the United States

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a ten (10) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one (1) continuing education hour (CEH)/professional development hour (PDH) of continuing education.

    Preview Course
    Click” Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

State Approvals

All of our online courses comply with the Continuing Professional Competency Guidelines published by the National Council of Examiners for Engineering and Surveying (NCEES) and the International Association for Continuing Education & Training (IACEP), therefore, shall be acceptable to all the state boards requiring mandatory continuing education.
EZ-pdh.com approved provider map of USA for professional engineersKey
Approved Providers Mandatory

This column lists states which require continuing education (CE) be completed with a state approved provider. We are approved in all of the seven states requiring pre-approval. “Click to Verify” button will transfer you to the State Board website listing approved providers. We are listed under Ezekiel Enterprises, LLC or EZpdh.com with POC: Raymond Bosek

Florida:
Approved Provider Number:0006346
(listed as Ezekiel Enterprises, LLC)Click to VerifyArchitecture and Interior Design Approved Provider Number:PVD433(listed as Ezekiel Enterprises, LLC)
Click to Verify
Indiana:
CE Approved Provider CE21800049(listed as Ezekiel Enterprises, LLC)
Click to Verify
Louisiana:
CPD Approved Provider CPD.0000317(listed as Ezekiel Enterprises, LLC)
Click to VerifyMaryland:
Approved Provider(listed as EZpdh.com)
Click to VerifyNew Jersey:
Approved CPC Provider 24GP00009900(listed as EZpdh.com)
Click to VerifyNew York:
NYSED Approved Sponsor #166(listed as Ezekiel Enterprises, LLC)
Click to VerifyNorth Carolina:
Approved Sponsor Number:S-0650(listed as Ezekiel Enterprises, LLC)
Click to Verify

Not Mandatory

This column lists states which DO NOT require continuing education (CE) to be completed with a state approved provider. States transfer responsibility to engineer to determine if the CE is acceptable and the state reserves the right to disallow hours if they determined hours are unacceptable. We recommend to complete CE with only state pre-approved providers

Alabama
Alaska
Arkansas
Delaware
Georgia
Idaho
Illinois
Iowa
Kansas
Kentucky
Maine
Maryland
Michigan
Minnesota
Mississippi
Missouri
Montana
Nebraska
Nevada
New Hampshire
New Mexico
North Dakota
Ohio
Oklahoma
Oregon
Pennsylvania
South Carolina
South Dakota
Tennessee
Texas
Utah
Vermont
Virginia
West Virginia
Wisconsin
Wyoming

Read More about State ApprovalsAre you a Land Surveyor? – Click Here for State Approvals

Scroll to Top