Courses

Showing 265–268 of 268 results

  • Virginia-Land Surveyors’s Package: 17 PDH

    $102.00 $64.00
    Add to cart
    Five Land Surveying courses courses that will earn 16 PDH guaranteed to be accepted by the Virginia APELSCIDLA BoardInstructor: Raymond Bosek, PE

    Land Surveyor’s Ethics: 2 PDH

    In this ethics course the student will understand the standards of professional behavior for adherence to the highest ethical conduct and revisit the emphasis that the holder of a professional license has a direct and vital impact on the safety, health, and welfare of the public.

    Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors : 4 PDH

    This course is an introduction of using sUAS in land surveying. From FAA licensing requirements to common sUAS products and software, with an understanding of these basics a land surveyor can easily get started in using this up and coming technology.

    Airborne Topographic LiDAR: 3 PDH

    In this course the student will review the principles of Airborne Topographic LiDAR and learn how to utilize methods to employ this technology in the field.

    Construction Surveying Curves: 3 PDH

    In this course the student will learns to locate points using angles and distances for establishing curves. An essential tool in construction surveying when determining the line of a curve for road layout or some other type of curved construction.

    Description of Lands: 3 PDH

    This course provides guidance for documenting accurate boundary descriptions and locations by survey in the standards followed for Executive and public land orders and proclamations.

    Corner Restoration Fundamentals: 2 PDH

    In this course the student will understand the understand federal guidelines of resurveying corner monuments and the procedures and laws to successfully reestablish these boundaries.

  • Wyoming-Land Surveyors’s Package: 30 PDH

    $180.00 $90.00
    Add to cart
    Eight Land Surveying courses courses that will earn 30 PDH guaranteed to be accepted by the Wyoming Board of Professional Engineers and Professional Land Surveyors Instructor: Raymond Bosek, PE

    Land Surveyor’s Ethics: 2 PDH

    In this ethics course the student will understand the standards of professional behavior for adherence to the highest ethical conduct and revisit the emphasis that the holder of a professional license has a direct and vital impact on the safety, health, and welfare of the public.

    Public Land Survey: Rectangular System: 8 PDH

    In this course the student will review the rectangular surveying system which has been used continuously in the United States since 1785. As all facets of this system occasionally come into use, the student will become well versed in the field procedures of conducting an original survey covering both historical and current methods.

    Aerial Photogrammetry: 5 PDH

    In this course the student will understand procedural guidance, technical specifications, and quality control (QC) criteria for performing aerial photogrammetric mapping activities.

    Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors : 4 PDH

    This course is an introduction of using sUAS in land surveying. From FAA licensing requirements to common sUAS products and software, with an understanding of these basics a land surveyor can easily get started in using this up and coming technology.

    Airborne Topographic LiDAR: 3 PDH

    In this course the student will review the principles of Airborne Topographic LiDAR and learn how to utilize methods to employ this technology in the field.

    Construction Surveying Curves: 3 PDH

    In this course the student will learns to locate points using angles and distances for establishing curves. An essential tool in construction surveying when determining the line of a curve for road layout or some other type of curved construction.

    Description of Lands: 3 PDH

    This course provides guidance for documenting accurate boundary descriptions and locations by survey in the standards followed for Executive and public land orders and proclamations.

    Corner Restoration Fundamentals: 2 PDH

    In this course the student will understand the understand federal guidelines of resurveying corner monuments and the procedures and laws to successfully reestablish these boundaries.

  • Ethics for Professional Engineers: 1 PDH

    Ethics for Professional Engineers: 1 PDH

    $6.00
    Add to cart
    In this course the student will study the National Society of Professional Engineers (NSPE) Code of Ethics. This Ethics course is intended to fulfill any state's ethics requirement. A ten-question quiz will test his or her understanding of the subject.
    Instructor: Raymond Bosek, PE
    In this course the student will study the National Society of Professional Engineers (NSPE) Code of Ethics. This Ethics course is intended to fulfill any state's ethics requirement. A ten-question quiz will test his or her understanding of the subject.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession
    • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Ethics for Professional Engineers-Case Reviews: 2 PDH

    Ethics for Professional Engineers-Case Reviews: 2 PDH

    $12.00
    Add to cart
    In this course the student will study several ethical review cases conducted by the National Society of Professional Engineers (NSPE). This Ethics course is intended to fulfill the state's ethics requirement.
    Instructor: Raymond Bosek, PE
    In this course the student will study several ethical review cases conducted by the National Society of Professional Engineers (NSPE). This Ethics course is intended to fulfill the state's ethics requirement.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession
    • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase