Nevada Packages

  • Sale! Civil Engineering Courses
    Six Civil Engineering courses plus Nevada Statutes, Codes & Ethics course that will earn 30 PDH guaranteed to be accepted by the Nevada Board of Licensure of Professional Engineers and Professional Land Surveyors. Instructor: Raymond Bosek, PE

    Nevada – Ethics including NV Laws and Rules for Professional Engineers: 4 PDH

    This course satisfies the Nevada continuing education requirement of two (2) professional development hours in professional ethics and one (1) professional development hours in provisions of NAC 625 & NRS 625, (ref. Nevada Administrative Code 625.40)
    In this course the student will study two ethics courses including the Nevada State Board of Professional Engineers and Land Surveyors Statutes and Codes.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Gravel Road Construction: 4 PDH

    It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.

    Lessons Learned-Design and Construction of Buildings: 3 PDH

    In this course the student will review lessons learned from post building occupancy evaluations to understand common building design and/or construction flaws and review essential tips to correct, avoid and/or mitigate these occurrences.

    Remote Sensing Essentials: 5 PDH

    In this course the student will understand the theory and practice of remote sensing and image processing. Remote sensing is valuable tool for engineers and surveyors as it provides a cost-effective means of surveying, monitoring, and mapping objects at or near the surface of the Earth.

    Residential Structural Design: 5 PDH

    In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.

    Sustainable Concrete Pavements: 5 PDH

    In this course the student will understand concrete pavement sustainability concepts and recommended practices for maximizing the sustainability of concrete pavements.

    Nevada-Civil Engineering Package #2: 30 PDH

    $90.00 Add to cart
    Six Civil Engineering courses plus Nevada Statutes, Codes & Ethics course that will earn 30 PDH guaranteed to be accepted by the Nevada Board of Licensure of Professional Engineers and Professional Land Surveyors. Instructor: Raymond Bosek, PE

    Nevada – Ethics including NV Laws and Rules for Professional Engineers: 4 PDH

    This course satisfies the Nevada continuing education requirement of two (2) professional development hours in professional ethics and one (1) professional development hours in provisions of NAC 625 & NRS 625, (ref. Nevada Administrative Code 625.40)
    In this course the student will study two ethics courses including the Nevada State Board of Professional Engineers and Land Surveyors Statutes and Codes.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Gravel Road Construction: 4 PDH

    It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.

    Lessons Learned-Design and Construction of Buildings: 3 PDH

    In this course the student will review lessons learned from post building occupancy evaluations to understand common building design and/or construction flaws and review essential tips to correct, avoid and/or mitigate these occurrences.

    Remote Sensing Essentials: 5 PDH

    In this course the student will understand the theory and practice of remote sensing and image processing. Remote sensing is valuable tool for engineers and surveyors as it provides a cost-effective means of surveying, monitoring, and mapping objects at or near the surface of the Earth.

    Residential Structural Design: 5 PDH

    In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.

    Sustainable Concrete Pavements: 5 PDH

    In this course the student will understand concrete pavement sustainability concepts and recommended practices for maximizing the sustainability of concrete pavements.

  • Sale! Civil Engineering Courses
    Six Civil Engineering courses plus Nevada Ethics and Statutes & Codes course that will earn 30 PDH guaranteed to be accepted by the Nevada Board of Licensure of Professional Engineers and Professional Land Surveyors.Instructor: Raymond Bosek, PE

    Nevada – Ethics including NV Laws and Rules for Professional Engineers: 4 PDH

    This course satisfies the Nevada continuing education requirement of two (2) professional development hours in professional ethics and one (1) professional development hour in provisions of NAC 625 & NRS 625, (ref. Nevada Administrative Code 625.40)
    In this course the student will study two ethics courses including the Nevada State Board of Professional Engineers and Land Surveyors Statutes and Codes. A total of thirty (30) questions will test his or her understanding of the subject.

    Stress and Strain in Soils: 4 PDH

    In this course the student will understand the properties and mechanics of soils and accurately calculate the stresses and deformations of soil masses.

    Geotechnical Subsurface Exploration for Roadways: 5 PDH

    In this course the student will understand the essentials of subsurface explorations for roadways with a comprehensive overview including site preparation, sampling methods, types of testing and methods, as well as standard guidelines and recommendations.

    Engineering Description of Soils and Rocks: 4 PDH

    In this course the student will understand the engineering characteristics of soils and rocks and to how to properly identify and classify to develop a subsurface profile for site evaluations.

    Laboratory Testing for Geotechnical Design and Construction: 5 PDH

    In this course the student will understand the intricate details of laboratory testing of subsurface soils and rocks in order to obtain values of their engineering properties necessary for design.

    Slope Stability in Embankments and Structures: 5 PDH

    In this course the student will understand the design of slope stability in embankments and structures and how to recognize, analyze, and solve slope instability issues encountered.

    Strategies for Improving Sustainability of Asphalt Pavements: 3 PDH

    In this course the student will understand sustainability throughout the entire pavement life cycle and the importance of recognizing context sensitivity and assessing trade-offs in developing sustainable solutions.

    Nevada-Civil Engineering Package: 30 PDH

    $90.00 Add to cart
    Six Civil Engineering courses plus Nevada Ethics and Statutes & Codes course that will earn 30 PDH guaranteed to be accepted by the Nevada Board of Licensure of Professional Engineers and Professional Land Surveyors.Instructor: Raymond Bosek, PE

    Nevada – Ethics including NV Laws and Rules for Professional Engineers: 4 PDH

    This course satisfies the Nevada continuing education requirement of two (2) professional development hours in professional ethics and one (1) professional development hour in provisions of NAC 625 & NRS 625, (ref. Nevada Administrative Code 625.40)
    In this course the student will study two ethics courses including the Nevada State Board of Professional Engineers and Land Surveyors Statutes and Codes. A total of thirty (30) questions will test his or her understanding of the subject.

    Stress and Strain in Soils: 4 PDH

    In this course the student will understand the properties and mechanics of soils and accurately calculate the stresses and deformations of soil masses.

    Geotechnical Subsurface Exploration for Roadways: 5 PDH

    In this course the student will understand the essentials of subsurface explorations for roadways with a comprehensive overview including site preparation, sampling methods, types of testing and methods, as well as standard guidelines and recommendations.

    Engineering Description of Soils and Rocks: 4 PDH

    In this course the student will understand the engineering characteristics of soils and rocks and to how to properly identify and classify to develop a subsurface profile for site evaluations.

    Laboratory Testing for Geotechnical Design and Construction: 5 PDH

    In this course the student will understand the intricate details of laboratory testing of subsurface soils and rocks in order to obtain values of their engineering properties necessary for design.

    Slope Stability in Embankments and Structures: 5 PDH

    In this course the student will understand the design of slope stability in embankments and structures and how to recognize, analyze, and solve slope instability issues encountered.

    Strategies for Improving Sustainability of Asphalt Pavements: 3 PDH

    In this course the student will understand sustainability throughout the entire pavement life cycle and the importance of recognizing context sensitivity and assessing trade-offs in developing sustainable solutions.

  • Sale! Electrical Engineering Courses
    Six Electrical Engineering courses plus Nevada Ethics and Statutes & Codes course that will earn 30 PDH guaranteed to be accepted by the Nevada Board of Licensure of Professional Engineers and Professional Land Surveyors.Instructor: Juan Pesante, PE

    Nevada – Ethics including NV Statutes and Codes for Professional Engineers: 4 PDH

    This course satisfies the Nevada continuing education requirement of two (2) professional development hours in professional ethics and one (1) professional development hours in provisions of NAC 625 & NRS 625, (ref. Nevada Administrative Code 625.40)
    In this course the student will study two ethics courses including the Nevada State Board of Professional Engineers and Land Surveyors Statutes and Codes.

    2023 NEC Significant Code Changes Part 1: 4 PDH

    Part 1 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    2023 NEC Significant Code Changes Part 2: 4 PDH

    Part 2 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    Blockchain Technology Overview: 3 PDH

    In this course the student will be introduced to Blockchain technology, from its history and beginnings, through the various components, models, and make-up and finally its applications and limitations.

    Electrical Safety: 5 PDH

    In this course the student will understand the dangers and hazards when working with or near electrical power and approaches to work safely to avoid serious injury.

    Forecasting Solar Radiation and Photovoltaic Power: 5 PDH

    Solar resource forecasting is critical for the operation and management of solar power plants and electric grids. In this course the student will understand the basic concepts and various methods of solar irradiance forecasting as well as forecasting the power production of Photovoltaic (PV) power plants.

    Solar Energy Measuring and Modeling: 5 PDH

    In this course the student will understand the concepts of measuring and modeling solar radiation, the various measurement systems available, satellite-based and operational models, and forecasting Solar Radiation and predicting Photovoltaic Power.

    Nevada-Electrical Engineering Package #2: 30 PDH

    $90.00 Add to cart
    Six Electrical Engineering courses plus Nevada Ethics and Statutes & Codes course that will earn 30 PDH guaranteed to be accepted by the Nevada Board of Licensure of Professional Engineers and Professional Land Surveyors.Instructor: Juan Pesante, PE

    Nevada – Ethics including NV Statutes and Codes for Professional Engineers: 4 PDH

    This course satisfies the Nevada continuing education requirement of two (2) professional development hours in professional ethics and one (1) professional development hours in provisions of NAC 625 & NRS 625, (ref. Nevada Administrative Code 625.40)
    In this course the student will study two ethics courses including the Nevada State Board of Professional Engineers and Land Surveyors Statutes and Codes.

    2023 NEC Significant Code Changes Part 1: 4 PDH

    Part 1 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    2023 NEC Significant Code Changes Part 2: 4 PDH

    Part 2 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).

    Blockchain Technology Overview: 3 PDH

    In this course the student will be introduced to Blockchain technology, from its history and beginnings, through the various components, models, and make-up and finally its applications and limitations.

    Electrical Safety: 5 PDH

    In this course the student will understand the dangers and hazards when working with or near electrical power and approaches to work safely to avoid serious injury.

    Forecasting Solar Radiation and Photovoltaic Power: 5 PDH

    Solar resource forecasting is critical for the operation and management of solar power plants and electric grids. In this course the student will understand the basic concepts and various methods of solar irradiance forecasting as well as forecasting the power production of Photovoltaic (PV) power plants.

    Solar Energy Measuring and Modeling: 5 PDH

    In this course the student will understand the concepts of measuring and modeling solar radiation, the various measurement systems available, satellite-based and operational models, and forecasting Solar Radiation and predicting Photovoltaic Power.

  • Sale! Electrical Engineering Courses
    Six Electrical Engineering courses plus Nevada Ethics and Statutes & Codes course that will earn 30 PDH guaranteed to be accepted by the Nevada Board of Licensure of Professional Engineers and Professional Land Surveyors.Instructor: Juan Pesante, PE

    Nevada – Ethics including NV Laws and Rules for Professional Engineers: 4 PDH

    This course satisfies the Nevada continuing education requirement of two (2) professional development hours in professional ethics and one (1) professional development hour in provisions of NAC 625 & NRS 625, (ref. Nevada Administrative Code 625.40)
    In this course the student will study two ethics courses including the Nevada State Board of Professional Engineers and Land Surveyors Statutes and Codes. A total of thirty (30) questions will test his or her understanding of the subject.

    Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH

    In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.

    Energy Storage Technology Cost and Performance: 4 PDH

    In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).

    Electrical Storage Guide for Electrical Engineers: 5 PDH

    This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.

    Electrification-Power System Evolution and Infrastructure Development: 5 PDH

    In this course the student will understand Electrification, the shift from non-electric to electric sources of energy at the point of final consumption, and an analysis of the potential impacts of widespread electrification on the evolution of the U.S. electricity system. This course follows the guide: Electrification Futures Study: Scenarios of Power System Evolution and Infrastructure Development for the United States, published by the National Renewable Energy Laboratory.

    Best Practices for O&M of Photovoltaic and Energy Storage Systems: 5 PDH

    In this course the student will understand how to reduce the cost and improve the effectiveness of operations and maintenance (O&M) for photovoltaic (PV) systems and combined PV and energy storage systems. The course follows the guide: Best Practices for O&M of Photovoltaic and Energy Storage Systems 3rd edition, published by the National Renewable Energy Laboratory.

    Analysis of National Charging infrastructure for Electric Vehicles: 3 PDH

    This courses addresses the fundamental question of how much plug-in electric vehicle (PEV) charging infrastructure is needed in the United States to support both plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs). In this course the student will understand PEV charging infrastructure requirements and analyze a range of plausible scenarios that consider the relationship between the evolution of the PEV fleet and charging infrastructure.

    Nevada-Electrical Engineering Package: 30 PDH

    $90.00 Add to cart
    Six Electrical Engineering courses plus Nevada Ethics and Statutes & Codes course that will earn 30 PDH guaranteed to be accepted by the Nevada Board of Licensure of Professional Engineers and Professional Land Surveyors.Instructor: Juan Pesante, PE

    Nevada – Ethics including NV Laws and Rules for Professional Engineers: 4 PDH

    This course satisfies the Nevada continuing education requirement of two (2) professional development hours in professional ethics and one (1) professional development hour in provisions of NAC 625 & NRS 625, (ref. Nevada Administrative Code 625.40)
    In this course the student will study two ethics courses including the Nevada State Board of Professional Engineers and Land Surveyors Statutes and Codes. A total of thirty (30) questions will test his or her understanding of the subject.

    Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH

    In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.

    Energy Storage Technology Cost and Performance: 4 PDH

    In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).

    Electrical Storage Guide for Electrical Engineers: 5 PDH

    This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.

    Electrification-Power System Evolution and Infrastructure Development: 5 PDH

    In this course the student will understand Electrification, the shift from non-electric to electric sources of energy at the point of final consumption, and an analysis of the potential impacts of widespread electrification on the evolution of the U.S. electricity system. This course follows the guide: Electrification Futures Study: Scenarios of Power System Evolution and Infrastructure Development for the United States, published by the National Renewable Energy Laboratory.

    Best Practices for O&M of Photovoltaic and Energy Storage Systems: 5 PDH

    In this course the student will understand how to reduce the cost and improve the effectiveness of operations and maintenance (O&M) for photovoltaic (PV) systems and combined PV and energy storage systems. The course follows the guide: Best Practices for O&M of Photovoltaic and Energy Storage Systems 3rd edition, published by the National Renewable Energy Laboratory.

    Analysis of National Charging infrastructure for Electric Vehicles: 3 PDH

    This courses addresses the fundamental question of how much plug-in electric vehicle (PEV) charging infrastructure is needed in the United States to support both plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs). In this course the student will understand PEV charging infrastructure requirements and analyze a range of plausible scenarios that consider the relationship between the evolution of the PEV fleet and charging infrastructure.

  • Sale! Mechanical Engineering Courses
    Six Mechanical Engineering courses plus Nevada Ethics and Statutes & Codes course that will earn 30 PDH guaranteed to be accepted by the Nevada Board of Licensure of Professional Engineers and Professional Land Surveyors.Instructor: Seth Grablow, PE

    Nevada – Ethics including NV Statutes and Codes for Professional Engineers: 4 PDH

    This course satisfies the Nevada continuing education requirement of two (2) professional development hours in professional ethics and one (1) professional development hours in provisions of NAC 625 & NRS 625, (ref. Nevada Administrative Code 625.40)
    In this course the student will study two ethics courses including the Nevada State Board of Professional Engineers and Land Surveyors Statutes and Codes.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Boiler Basics-Operation and Maintenance: 5 PDH

    In this course the student will understand steam generation, boilers and boiler components, and basic concepts in their operation and maintenance.

    Fire Protection Systems: 3 PDH

    In this course the student will understand fire protection systems and fire protection system operations and will be able to familiarize themselves with the various systems and components including operations and maintenance/ inspection procedures.

    Improving Motor and Drive System Performance: 5 PDH

    This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.

    Installation, Maintenance, and Repair of Water and Sewage Systems: 5 PDH

    In this course the student will understand a facility’s water and sewage systems and associated common components as well as basic concepts in installing, maintaining, repairing and the operation and maintenance of these systems.

    Principles of Hydraulic and Pneumatic Systems: 4 PDH

    In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.

    Nevada-Mechanical Engineering Package #2: 30 PDH

    $90.00 Add to cart
    Six Mechanical Engineering courses plus Nevada Ethics and Statutes & Codes course that will earn 30 PDH guaranteed to be accepted by the Nevada Board of Licensure of Professional Engineers and Professional Land Surveyors.Instructor: Seth Grablow, PE

    Nevada – Ethics including NV Statutes and Codes for Professional Engineers: 4 PDH

    This course satisfies the Nevada continuing education requirement of two (2) professional development hours in professional ethics and one (1) professional development hours in provisions of NAC 625 & NRS 625, (ref. Nevada Administrative Code 625.40)
    In this course the student will study two ethics courses including the Nevada State Board of Professional Engineers and Land Surveyors Statutes and Codes.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Boiler Basics-Operation and Maintenance: 5 PDH

    In this course the student will understand steam generation, boilers and boiler components, and basic concepts in their operation and maintenance.

    Fire Protection Systems: 3 PDH

    In this course the student will understand fire protection systems and fire protection system operations and will be able to familiarize themselves with the various systems and components including operations and maintenance/ inspection procedures.

    Improving Motor and Drive System Performance: 5 PDH

    This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.

    Installation, Maintenance, and Repair of Water and Sewage Systems: 5 PDH

    In this course the student will understand a facility’s water and sewage systems and associated common components as well as basic concepts in installing, maintaining, repairing and the operation and maintenance of these systems.

    Principles of Hydraulic and Pneumatic Systems: 4 PDH

    In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.

  • Sale! Mechanical Engineering Courses
    Six Mechanical Engineering courses plus Nevada Ethics and Statutes & Codes course that will earn 30 PDH guaranteed to be accepted by the Nevada Board of Licensure of Professional Engineers and Professional Land Surveyors.Instructor: Seth Grablow, PE

    Nevada – Ethics including NV Laws and Rules for Professional Engineers: 4 PDH

    This course satisfies the Nevada continuing education requirement of two (2) professional development hours in professional ethics and one (1) professional development hour in provisions of NAC 625 & NRS 625, (ref. Nevada Administrative Code 625.40)
    In this course the student will study two ethics courses including the Nevada State Board of Professional Engineers and Land Surveyors Statutes and Codes. A total of thirty (30) questions will test his or her understanding of the subject.

    Systems Engineering Fundamentals Part 1: 5 PDH

    Part one of a two-part course, this course provides a thorough overview of the systems engineering process and presents a in-depth review of the tools and processes to to develop a system efficiently and effectively and to support that system through its life cycle.

    Systems Engineering Fundamentals Part 2: 5 PDH

    Part two of a two-part course, this course provides a thorough overview of the systems engineering process and presents a in-depth review of the tools and processes to to develop a system efficiently and effectively and to support that system through its life cycle.

    Improving Pumping System Performance: 4 PDH

    This course provides a thorough overview of pumping systems and their components and practical guidelines to enhance performance and increase efficiency.

    Improving Steam System Performance: 5 PDH

    This course provides a thorough overview of steam systems and their components and practical guidelines to enhance performance and increase efficiency.

    Improving Compressed Air System Performance: 4 PDH

    This course provides a thorough overview of compressed air systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.

    Coating Types and Characteristics of Metals: 3 PDH

    In this course the student will understand the characteristics and applications of various industrial coatings and metal finishes.

    Nevada-Mechanical Engineering Package: 30 PDH

    $90.00 Add to cart
    Six Mechanical Engineering courses plus Nevada Ethics and Statutes & Codes course that will earn 30 PDH guaranteed to be accepted by the Nevada Board of Licensure of Professional Engineers and Professional Land Surveyors.Instructor: Seth Grablow, PE

    Nevada – Ethics including NV Laws and Rules for Professional Engineers: 4 PDH

    This course satisfies the Nevada continuing education requirement of two (2) professional development hours in professional ethics and one (1) professional development hour in provisions of NAC 625 & NRS 625, (ref. Nevada Administrative Code 625.40)
    In this course the student will study two ethics courses including the Nevada State Board of Professional Engineers and Land Surveyors Statutes and Codes. A total of thirty (30) questions will test his or her understanding of the subject.

    Systems Engineering Fundamentals Part 1: 5 PDH

    Part one of a two-part course, this course provides a thorough overview of the systems engineering process and presents a in-depth review of the tools and processes to to develop a system efficiently and effectively and to support that system through its life cycle.

    Systems Engineering Fundamentals Part 2: 5 PDH

    Part two of a two-part course, this course provides a thorough overview of the systems engineering process and presents a in-depth review of the tools and processes to to develop a system efficiently and effectively and to support that system through its life cycle.

    Improving Pumping System Performance: 4 PDH

    This course provides a thorough overview of pumping systems and their components and practical guidelines to enhance performance and increase efficiency.

    Improving Steam System Performance: 5 PDH

    This course provides a thorough overview of steam systems and their components and practical guidelines to enhance performance and increase efficiency.

    Improving Compressed Air System Performance: 4 PDH

    This course provides a thorough overview of compressed air systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.

    Coating Types and Characteristics of Metals: 3 PDH

    In this course the student will understand the characteristics and applications of various industrial coatings and metal finishes.

  • Sale!
    Eight Land Surveying courses that will earn 30 PDH guaranteed to be accepted by the Michigan Department of Licensing and Regulatory Affairs.Instructor: Raymond Bosek, PE

    Nevada – Ethics including NV Laws and Rules for Professional Engineers: 4 PDH

    This course satisfies the Nevada continuing education requirement of two (2) professional development hours in professional ethics and one (1) professional development hour in provisions of NAC 625 & NRS 625, (ref. Nevada Administrative Code 625.40)
    In this course the student will study two ethics courses including the Nevada State Board of Professional Engineers and Land Surveyors Statutes and Codes. A total of thirty (30) questions will test his or her understanding of the subject.

    Public Land Survey Rectangular System: 8 PDH

    In this course the student will review the rectangular surveying system which has been used continuously in the United States since 1785. As all facets of this system occasionally come into use, the student will become well versed in the field procedures of conducting an original survey covering both historical and current methods.

    Aerial Photogrammetry: 5 PDH

    In this course the student will understand procedural guidance, technical specifications, and quality control (QC) criteria for performing aerial photogrammetric mapping activities.

    Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors: 4 PDH

    This course is an introduction of using sUAS in land surveying. From FAA licensing requirements to common sUAS products and software, with an understanding of these basics a land surveyor can easily get started in using this up and coming technology.

    Airborne Topographic LiDAR: 3 PDH

    In this course the student will review the principles of Airborne Topographic LiDAR and learn how to utilize methods to employ this technology in the field.

    Construction Surveying Curves: 3 PDH

    In this course the student will learns to locate points using angles and distances for establishing curves. An essential tool in construction surveying when determining the line of a curve for road layout or some other type of curved construction.

    Description of Lands: 3 PDH

    This course provides guidance for documenting accurate boundary descriptions and locations by survey in the standards followed for Executive and public land orders and proclamations.

    Nevada-Land Surveyors Package: 30 PDH

    $90.00 Add to cart
    Eight Land Surveying courses that will earn 30 PDH guaranteed to be accepted by the Michigan Department of Licensing and Regulatory Affairs.Instructor: Raymond Bosek, PE

    Nevada – Ethics including NV Laws and Rules for Professional Engineers: 4 PDH

    This course satisfies the Nevada continuing education requirement of two (2) professional development hours in professional ethics and one (1) professional development hour in provisions of NAC 625 & NRS 625, (ref. Nevada Administrative Code 625.40)
    In this course the student will study two ethics courses including the Nevada State Board of Professional Engineers and Land Surveyors Statutes and Codes. A total of thirty (30) questions will test his or her understanding of the subject.

    Public Land Survey Rectangular System: 8 PDH

    In this course the student will review the rectangular surveying system which has been used continuously in the United States since 1785. As all facets of this system occasionally come into use, the student will become well versed in the field procedures of conducting an original survey covering both historical and current methods.

    Aerial Photogrammetry: 5 PDH

    In this course the student will understand procedural guidance, technical specifications, and quality control (QC) criteria for performing aerial photogrammetric mapping activities.

    Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors: 4 PDH

    This course is an introduction of using sUAS in land surveying. From FAA licensing requirements to common sUAS products and software, with an understanding of these basics a land surveyor can easily get started in using this up and coming technology.

    Airborne Topographic LiDAR: 3 PDH

    In this course the student will review the principles of Airborne Topographic LiDAR and learn how to utilize methods to employ this technology in the field.

    Construction Surveying Curves: 3 PDH

    In this course the student will learns to locate points using angles and distances for establishing curves. An essential tool in construction surveying when determining the line of a curve for road layout or some other type of curved construction.

    Description of Lands: 3 PDH

    This course provides guidance for documenting accurate boundary descriptions and locations by survey in the standards followed for Executive and public land orders and proclamations.

State Approvals

All of our online courses comply with the Continuing Professional Competency Guidelines published by the National Council of Examiners for Engineering and Surveying (NCEES) and the International Association for Continuing Education & Training (IACEP), therefore, shall be acceptable to all the state boards requiring mandatory continuing education.
EZ-pdh.com approved provider map of USA for professional engineersKey
Approved Providers Mandatory

This column lists states which require continuing education (CE) be completed with a state approved provider. We are approved in all of the seven states requiring pre-approval. “Click to Verify” button will transfer you to the State Board website listing approved providers. We are listed under Ezekiel Enterprises, LLC or EZpdh.com with POC: Raymond Bosek

Florida:
Approved Provider Number:0006346
(listed as Ezekiel Enterprises, LLC)Click to VerifyArchitecture and Interior Design Approved Provider Number:PVD433(listed as Ezekiel Enterprises, LLC)
Click to Verify
Indiana:
CE Approved Provider CE21800049(listed as Ezekiel Enterprises, LLC)
Click to Verify
Louisiana:
CPD Approved Provider CPD.0000317(listed as Ezekiel Enterprises, LLC)
Click to VerifyMaryland:
Approved Provider(listed as EZpdh.com)
Click to VerifyNew Jersey:
Approved CPC Provider 24GP00009900(listed as EZpdh.com)
Click to VerifyNew York:
NYSED Approved Sponsor #166(listed as Ezekiel Enterprises, LLC)
Click to VerifyNorth Carolina:
Approved Sponsor Number:S-0650(listed as Ezekiel Enterprises, LLC)
Click to Verify

Not Mandatory

This column lists states which DO NOT require continuing education (CE) to be completed with a state approved provider. States transfer responsibility to engineer to determine if the CE is acceptable and the state reserves the right to disallow hours if they determined hours are unacceptable. We recommend to complete CE with only state pre-approved providers

Alabama
Alaska
Arkansas
Delaware
Georgia
Idaho
Illinois
Iowa
Kansas
Kentucky
Maine
Maryland
Michigan
Minnesota
Mississippi
Missouri
Montana
Nebraska
Nevada
New Hampshire
New Mexico
North Dakota
Ohio
Oklahoma
Oregon
Pennsylvania
South Carolina
South Dakota
Tennessee
Texas
Utah
Vermont
Virginia
West Virginia
Wisconsin
Wyoming

Read More about State ApprovalsAre you a Land Surveyor? – Click Here for State Approvals

Scroll to Top