Ohio Packages

Per Ohio R.C. 4733.151, 24 of the 30 required hours must be “timed & tracked”.

We offer three types of timed courses:
– Live webinars – no quiz, instructor lead live instruction
– On-demand webinars (recorded webinars) – no quiz, no lesson timers, simply watch a recorded live presentation video on any device (start & stop at your leisure)
– Timed correspondence courses – multiple timed lessons with a final course quiz

Showing 1–24 of 40 results

  • Civil Engineering Courses

    Ohio-Civil Engineering Package: 30 PDH

    $180.00 $90.00
    Add to cart
    This course package satisfies Ohio R.C. section 4733.151 – 24 hrs (six courses) of the 30 hrs are timed & tracked, the remaining six hours (one course) is our typical online correspondence course.
    Six Civil Engineering courses plus Ohio Laws, Rules, & Ethics course that will earn 30 PDH guaranteed to be accepted by the Ohio State Board of Registration for Professional Engineers & Surveyors Instructor: Raymond Bosek, PE

    Course Package consists of:

      • Ohio – Laws, Rules, and Ethics (Ohio Timed): 3 PDH
      • Administering the Construction Project (Ohio Timed): 4 PDH
      • Design/Build Project Delivery (Ohio Timed): 4 PDH
      • Project Management (Ohio Timed): 4 PDH
      • Infrastructure Planning (Ohio Timed): 4 PDH
      • Fundamentals of Metals (Ohio Timed): 5 PDH
      • Pavement Design for Roads, Streets, Walks, and Open Storage Areas: 6 PDH (Online Correspondence)

  • Mechanical Engineering Courses

    Ohio-Mechanical Engineering Package: 30 PDH

    $180.00 $90.00
    Add to cart
    This course package satisfies Ohio R.C. section 4733.151 – 24 hrs (six courses) of the 30 hrs are timed & tracked, the remaining six hours (two courses) are our typical online correspondence course.
    Seven Mechanical Engineering courses plus Ohio Laws, Rules, & Ethics course that will earn 30 PDH guaranteed to be accepted by the Ohio State Board of Registration for Professional Engineers & Surveyors Instructor: Seth, Grablow PE

    Course Package consists of:

      • Ohio – Laws, Rules, and Ethics (Ohio Timed): 3 PDH
      • Fundamentals of Metals (Ohio Timed): 5 PDH
      • Fundamentals of Pumps (Ohio Timed): 4 PDH
      • Fundamentals of Valves (Ohio Timed): 4 PDH
      • Introduction to Mechanical Components (Ohio Timed): 4 PDH
      • Fluid Flow (Ohio Timed): 4 PDH
      • Chillers, Refrigerant Compressors, and Heating Systems: 5 PDH (Online Correspondence)
      • Pumped Storage Hydropower and Conduit Hydropower: 1 PDH (Online Correspondence)

  • Electrical Engineering Courses

    Ohio-Electrical Engineering Package: 30 PDH

    Read more
    This course package satisfies Ohio R.C. section 4733.151 – 24 hrs (seven courses) of the 30 hrs are timed & tracked, the remaining six hours (one course) is our typical online correspondence course.
    Seven Electrical Engineering courses plus Ohio Laws, Rules, & Ethics course that will earn 30 PDH guaranteed to be accepted by the Ohio State Board of Registration for Professional Engineers & Surveyors Instructor: Juan Pesante, PE

    Course Package consists of:

      • Ohio – Laws, Rules, and Ethics (Ohio Timed): 3 PDH
      • Emergency and Standby Power Systems (Ohio Timed): 4PDH
      • Grounding and Bonding of Electrical Systems (Ohio Timed): 4 PDH
      • Project Management (Ohio Timed): 4PDH
      • Infrastructure Planning (Ohio Timed): 4PDH
      • Administering the Construction Project (Ohio Timed): 4 PDH
      • Emerging Technologies Connected Vehicles: 1PDH (On-Demand Webinar)
      • AC Motors, Transformers, Instruments & Distribution Systems: 6 PDH (Online Correspondence)

  • Administering the Construction Project (Ohio Timed): 4 PDH

    $24.00
    Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    In this course the student reviews the management and administrative procedures that practitioners will need to guide construction projects from the pre-construction phase to project close out successfully. The course will benefit professional engineers serving as project managers or field representatives by presenting techniques that can be applied to the construction project to help minimize or resolve claims or disputes.Instructor:Raymond Bosek, PE

    In this course the student reviews the management and administrative procedures that practitioners will need to guide construction projects from the pre-construction phase to project close out successfully. The course will benefit professional engineers serving as project managers or field representatives by presenting techniques that can be applied to the construction project to help minimize or resolve claims or disputes.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase
  • Design/Build Project Delivery (Ohio Timed): 4 PDH

    $24.00
    Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    In this course the student will learn the essentials of a Design-Build project delivery system. The traditional approach for construction projects consists of the appointment of a designer on one side, and the appointment of a contractor on the other side. The design–build procurement route changes the traditional sequence of work. It answers the client’s wishes for a single point of responsibility for both development of the design and project construction to effectively reduce risks and costs and speed-up final delivery.
    Instructor:Raymond Bosek, PE

    In this course the student will learn the essentials of a Design-Build project delivery system. The traditional approach for construction projects consists of the appointment of a designer on one side, and the appointment of a contractor on the other side. The design–build procurement route changes the traditional sequence of work. It answers the client’s wishes for a single point of responsibility for both development of the design and project construction to effectively reduce risks and costs and speed-up final delivery.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase
  • Emergency and Standby Power Systems (Ohio Timed): 4 PDH

    $24.00
    Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    In this course the student will review electrical system grounding and bonding issues associated with solidly grounded systems under 600V. This course can serve as an introduction to grounding and bonding for engineers with little or no professional electrical design experience. The course also presents practical, but not widely known, grounding and bonding application information that will benefit even the most seasoned electrical design professional.Instructor:Juan Pesante, PE

    The purpose of this course is to familiarize engineers with emergency and standby internal combustion diesel engine-generator set power systems under 600V. This course can serve as an introduction to emergency and standby power systems and applications for engineers with little or no professional electrical design experience. The course also presents practical emergency and standby power system application information that will benefit even the most seasoned electrical design professional.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase
  • Fluid Flow: 4 PDH

    Fluid Flow (Ohio Timed): 4 PDH

    $24.00
    Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    Fluid flow and practical fluid mechanics is essential to any engineer's knowledge base. This course will overview the basic principles of fluid flow including the three key attributes to solve all fluid problems. Bernoulli Equation will be discussed in detail to enable understanding of different types of energy in a fluid stream. Laminar and turbulent flow, head loss, and factors affecting head loss will also be dicussed in detail and explained with practical problems.Instructor: Seth Grablow, PE

    Fluid flow and practical fluid mechanics is essential to any engineer's knowledge base. This course will overview the basic principles of fluid flow including the three key attributes to solve all fluid problems. Bernoulli Equation will be discussed in detail to enable understanding of different types of energy in a fluid stream. Laminar and turbulent flow, head loss, and factors affecting head loss will also be dicussed in detail and explained with practical problems.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Review of key principles
      • Shear Stress in a fluid
      • Conservation of Mass
      • Conservation of Momentum
      • Reynolds number
      • Laminar versus turbulent flow
      • Bernoulli Equation
      • Major head losses
      • Minor head losses
      • System level analysis

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase
  • Fundamentals of Metals: 8 PDH

    Fundamentals of Metals (Ohio Timed): 5 PDH

    $30.00
    Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    The course provides an understanding of the structure and properties of metals, stress mechanisms, failure modes and the characteristics determine their usefulness for a specific application. Often, materials are subject to variable forces (loads). The engineer calculates these forces to establish the service that can be expected and material scientists experiment to determine how materials deform (elongate, compress, and twist) or break as a function of applied load, time, temperature, and other conditions.Instructor: Seth Grablow, PE

    The course provides an understanding of the structure and properties of metals, stress mechanisms, failure modes and the characteristics determine their usefulness for a specific application. Often, materials are subject to variable forces (loads). The engineer calculates these forces to establish the service that can be expected and material scientists experiment to determine how materials deform (elongate, compress, and twist) or break as a function of applied load, time, temperature, and other conditions.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Mechanical properties of metals
    • Structure of metals and how those structures are affected by various processes

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 5 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase
  • Fundamentals of Pumps (Ohio Timed): 4 PDH

    $24.00
    Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    This online course provides an overview of centrifugal and positive displacement pumps, pump components, protection, and operational considerations. Pumps serve in a wide range of applications, from industrial uses such as pumping oil or natural gas, to consumer uses in vehicles or decorative fountains. Knowledge of the different designs of pumps can be used when selecting them for use in a system.Instructor: Seth Grablow, PE

    This online course provides an overview of centrifugal and positive displacement pumps, pump components, protection, and operational considerations. Pumps serve in a wide range of applications, from industrial uses such as pumping oil or natural gas, to consumer uses in vehicles or decorative fountains. Knowledge of the different designs of pumps can be used when selecting them for use in a system.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Centrifugal Pump Design and Classification
    • Pump Operation and Protection
    • Cavitation Prevention
    • Positive Displacement Pump Design and Classification

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase
  • Fundamentals of Valves (Ohio Timed): 4 PDH

    $24.00
    Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    Valves are a ubiquitous feature in many industrail facilities. As Valves make up the most common single piece of equipment found in industrial facilities familiarity with valves is useful practical knowledge. This course will provide an overview of the common components of valves, types of valves usage, design considerations, and actuation methods.Instructor: Seth Grablow, PE

    Valves are a ubiquitous feature in many industrial facilities. As Valves make up the most common single piece of equipment found in industrial facilities familiarity with valves is useful practical knowledge. This course will provide an overview of the common components of valves, types of valves usage, design considerations, and actuation methods.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Valve Functions
    • Basic Parts of Valves
    • Different Types of Values (Usage and Design)
    • General Design Considerations when using valves
    • Types of Valve Actuators

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Grounding and Bonding of Electrical Systems (Ohio Timed): 4 PDH

    $24.00
    Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    In this course the student will review electrical system grounding and bonding issues associated with solidly grounded systems under 600V. This course can serve as an introduction to grounding and bonding for engineers with little or no professional electrical design experience. The course also presents practical, but not widely known, grounding and bonding application information that will benefit even the most seasoned electrical design professional.Instructor:Juan Pesante, PE

    In this course the student will review electrical system grounding and bonding issues associated with solidly grounded systems under 600V. This course can serve as an introduction to grounding and bonding for engineers with little or no professional electrical design experience. The course also presents practical, but not widely known, grounding and bonding application information that will benefit even the most seasoned electrical design professional.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase
  • Heat Exchangers Fundamentals (Ohio Timed): 2 PDH

    $12.00
    Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    Heat Exchangers are a vital part to many industrial and consumer systems. They can be found anywhere from power plants and breweries to cars and HVAC systems. Heat Exchangers are vital for transferring heat from or between fluids. Knowledge of the fundamentals behind the use and design is vital to anyone involved with mechanical systems. This course reviews the practical applications of thermodynamics, heat transfer, and fluid flow principles covered in other PDH courses.Instructor: Seth Grablow, PE

    Heat Exchangers are a vital part to many industrial and consumer systems. They can be found anywhere from power plants and breweries to cars and HVAC systems. Heat Exchangers are vital for transferring heat from or between fluids. Knowledge of the fundamentals behind the use and design is vital to anyone involved with mechanical systems. This course reviews the practical applications of thermodynamics, heat transfer, and fluid flow principles covered in other PDH courses.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Methods of Constructing Heat Exchangers
    • Types of Heat Exchangers
    • Review Rate of Heat Transfer equations
    • Applications of Heat Exchangers

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase
  • Heat Transfer: 4 PDH

    Heat Transfer (Ohio Timed): 4 PDH

    $24.00
    Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    The transfer of heat is an integral part of many industrial processes. Moreover, heat transfer affects our everyday lives – from an oven heating our dinner to the wind cooling us on a hot summer day. Thus, it is important that the engineer understands how to apply the basic principles of heat transfer to solve real-world problems.Instructor: Seth Grablow, PE

    The transfer of heat is an integral part of many industrial processes. Moreover, heat transfer affects our everyday lives – from an oven heating our dinner to the wind cooling us on a hot summer day. Thus, it is important that the engineer understands how to apply the basic principles of heat transfer to solve real-world problems.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Heat transfer definitions and terminology, including heat flux, thermal conductivity, LMTD, and heat transfer coefficients
    • Conduction and the equivalent resistance formulas
    • Convection and use of the overall heat transfer coefficient
    • Radiant heat transfer, including black bodies, gray bodies and emissivity

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase
  • Infrastructure Planning (Ohio Timed): 4 PDH

    $24.00
    Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    This course presents the main concepts of infrastructure planning in the public sector including the environmental, social, and institutional assessments and discusses many planning methodologies and approaches.
    The purpose of this course is to provide practitioners involved in planning public infrastructure projects with guidelines to be considered and applied in the planning process.Instructor:Juan Pesante, PE
    This online timed course satisfies Ohio R.C. section 4733.151
    This course presents the main concepts of infrastructure planning in the public sector including the environmental, social, and institutional assessments and discusses many planning methodologies and approaches.
    The purpose of this course is to provide practitioners involved in planning public infrastructure projects with guidelines to be considered and applied in the planning process.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase
  • Introduction to Mechanical Components (Ohio Timed): 4 PDH

    $24.00
    Add to cart
    Along with pumps and valves, reviewed in seperate PDH courses, there are many other components that can be found in an industrial/power generation setting. Knowledge of these systems can be useful to any engineer. This online course provides a brief overview of air compressors, hydraulics, boilers, cooling towers, and other components likely to be installed in an industrial facility.Instructor: Seth Grablow, PE

    Along with pumps and valves, reviewed in seperate PDH courses, there are many other components that can be found in an industrial/power generation setting. Knowledge of these systems can be useful to any engineer. This online course provides a brief overview of air compressors, hydraulics, boilers, cooling towers, and other components likely to be installed in an industrial facility.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Air Compressors
    • Hydraulics
    • Boilers
    • Cooling Towers
    • Demineralizers
    • Pressurizers
    • Steam Tramps
    • Filters and Strainers
    • Basic operations and functions of these components
    • Features typical to these components

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 16 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase
  • Modern Heat Pumps: 1PDH (On-Demand Webinar)

    $10.00
    Add to cart
    In this course the engineer will be introduced to modern heat pumps and their applications. This introductory course will enable the students to understand the basics of the latest heat pump technologies and how to apply to multiple applications.
    Instructor: Seth Grablow, PE
    In this course the engineer will be introduced to modern heat pumps and their applications. This introductory course will enable the students to understand the basics of the latest heat pump technologies and how to apply to multiple applications.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Basic A/C and Heat Pump cycles
      • Residential/commerical Heat pump applications and rating heat pumps
      • Overview of Variable Refrigerant Flow (VRF) heat pumps
      • Overview of Variable Refrigerant Volume (VRV) heat pumps
      • Using modern heat pumps for LEED certifications

    CERTIFICATE OF COMPLETION

    This 1 hour (50 min) ondemand webinar satisfies timed and monitored instruction required for Ohio Licensed Professional Engineers. Upon completion all attendees will able to immediately print a certificate of completion. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the Ondemand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a personal accountability statement and a certificate of completion will be immediately generated.
    You may print or save your certificate or access anytime within your account.

  • Ohio – Laws, Rules, and Ethics for Professional Engineers: 3 PDH

    Ohio – Laws, Rules, and Ethics (Ohio Timed): 3 PDH

    $18.00
    Add to cart
    This course satisfies Ohio R.C. section 4733.151 as a CPD online course. Ohio licensees may fulfill all of their hours with this type of course.
    Additional Ohio timed online courses may be found at Ohio Courses (also found above under Courses)
    In this course the student will study the Ohio State Board of Registration for Professional Engineers and Surveyors Laws and Rules, including Professional Engineering Ethics. A twenty-five question quiz will test his or her understanding of the subject.
    Instructor: Raymond Bosek, PE
    In this course the student will study the Ohio State Board of Registration for Professional Engineers and Surveyors Laws and Rules, including Professional Engineering Ethics. A twenty-five question quiz will test his or her understanding of the subject.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer’s guidelines for practicing within Ohio's laws and rules
    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Project Management (Ohio Timed): 4 PDH

    $24.00
    Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    The purpose of this course is to provide the practitioner with the foundational project management principles necessary to effectively meet all expectations with regard to final project delivery. Instructor: Raymond Bosek, PE

    The purpose of this course is to provide the practitioner with the foundational project management principles necessary to effectively meet all expectations with regard to final project delivery.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase
  • Thermodynamics: 8 PDH

    Thermodynamics (Ohio Timed): 8 PDH

    $48.00
    Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    This course provides a detailed overview of Thermodynamics Principles and Practices including thermodynamic principles in practical industrial, commercial and residential applications. The student will comprehend, analyze and solve various types of practical thermodynamic problems through several case studies. Laws, equations, graphs, charts, tables and diagrams, pertaining to various thermodynamics concepts, are covered and utilized in the analysis and solution of the case study problems.Instructor: Seth Grablow, PE

    This course provides a detailed overview of Thermodynamics Principles and Practices including thermodynamic principles in practical industrial, commercial and residential applications. The student will comprehend, analyze and solve various types of practical thermodynamic problems through several case studies. Laws, equations, graphs, charts, tables and diagrams, pertaining to various thermodynamics concepts, are covered and utilized in the analysis and solution of the case study problems.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Energy concepts and extension/application of the law of conservation of energy
    • Conversion of thermal energy to electricity through steam turbines and electric generators
    • Understanding and application of Steam Tables
    • Fundamental and essential concepts such as entropy, enthalpy, heat of fusion, heat of sublimation, latent and sensible heat
    • Thermodynamic processes
    • Heat engine cycles
    • Pyschrometric analysis based on psychrometric chart
    • Refrigeration cycle related numerical analysis utilizing Pressure –Enthalpy Charts

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 8 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase
  • 2017 NEC Significant Code Changes Part 1: 1 PDH (On-Demand Webinar)

    $10.00
    Add to cart
    Part 1 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2017 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2014 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC from the introduction up to and including article 200. The student will be identifying chapters, articles, and tables of where and what significant changes occurred (be it an addition, revision, or deleting), the student will review the 2017 version of the updated text, and understand the reason for the change with an explanatory brief.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Become familiar with some of the significant changes including additions, deletions, and modification to the 2017 Edition of NFPA 70: National Electrical Code (NEC) from the 2014 Edition for Chapters 1 up to and including chapter 2
      • Comprehend, after reviewing the significant changes and additions to the 2017 Edition of NFPA 70: National Electrical Code (NEC) the large scope of the changes to the code, thereby seeking additional and more thorough reviews of the entire code

    CERTIFICATE OF COMPLETION

    This 1 hour (50 min) on-demand webinar satisfies timed and monitored instruction required for Ohio Licensed Professional Engineers. Upon completion all attendees will able to immediately print a certificate of completion. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the Ondemand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a personal accountability statement and a certificate of completion will be immediately generated.
    You may print or save your certificate or access anytime within your account.

  • 2017 NEC Significant Code Changes Part 2: 1 PDH (On-Demand Webinar)

    $10.00
    Add to cart
    Part 2 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2017 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2014 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC from chapter 3 through chapter 4. The student will be identifying chapters, articles, and tables of where and what significant changes occurred (be it an addition, revision, or deleting), the student will review the 2017 version of the updated text, and understand the reason for the change with an explanatory brief.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Become familiar with some of the significant changes including additions, deletions, and modification to the 2017 Edition of NFPA 70: National Electrical Code (NEC) from the 2014 Edition for Chapter 3 up to and including chapter 4
      • Comprehend, after reviewing the significant changes and additions to the 2017 Edition of NFPA 70: National Electrical Code (NEC) the large scope of the changes to the code, thereby seeking additional and more thorough reviews of the entire code

    CERTIFICATE OF COMPLETION

    This 1 hour (50 min) on-demand webinar satisfies timed and monitored instruction required for Ohio Licensed Professional Engineers. Upon completion all attendees will able to immediately print a certificate of completion. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the Ondemand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a personal accountability statement and a certificate of completion will be immediately generated.
    You may print or save your certificate or access anytime within your account.

  • 2017 NEC Significant Code Changes Part 3: 1 PDH (On-Demand Webinar)

    $10.00
    Add to cart
    Part 3 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2017 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2014 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC for chapter 5. The student will be identifying chapters, articles, and tables of where and what significant changes occurred (be it an addition, revision, or deleting), the student will review the 2017 version of the updated text, and understand the reason for the change with an explanatory brief.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Become familiar with some of the significant changes including additions, deletions, and modification to the 2017 Edition of NFPA 70: National Electrical Code (NEC) from the 2014 Edition for Chapter 5
      • Comprehend, after reviewing the significant changes and additions to the 2017 Edition of NFPA 70: National Electrical Code (NEC) the large scope of the changes to the code, thereby seeking additional and more thorough reviews of the entire code

    CERTIFICATE OF COMPLETION

    This 1 hour (50 min) on-demand webinar satisfies timed and monitored instruction required for Ohio Licensed Professional Engineers. Upon completion all attendees will able to immediately print a certificate of completion. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the Ondemand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a personal accountability statement and a certificate of completion will be immediately generated.
    You may print or save your certificate or access anytime within your account.

  • 2017 NEC Significant Code Changes Part 4: 1 PDH (On-Demand Webinar)

    $10.00
    Add to cart
    Part 4 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2017 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2014 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC for chapter 6. The student will be identifying chapters, articles, and tables of where and what significant changes occurred (be it an addition, revision, or deleting), the student will review the 2017 version of the updated text, and understand the reason for the change with an explanatory brief.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Become familiar with some of the significant changes including additions, deletions, and modification to the 2017 Edition of NFPA 70: National Electrical Code (NEC) from the 2014 Edition for Chapter 6
      • Comprehend, after reviewing the significant changes and additions to the 2017 Edition of NFPA 70: National Electrical Code (NEC) the large scope of the changes to the code, thereby seeking additional and more thorough reviews of the entire code

    CERTIFICATE OF COMPLETION

    This 1 hour (50 min) on-demand webinar satisfies timed and monitored instruction required for Ohio Licensed Professional Engineers. Upon completion all attendees will able to immediately print a certificate of completion. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the Ondemand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a personal accountability statement and a certificate of completion will be immediately generated.
    You may print or save your certificate or access anytime within your account.

  • 2017 NEC Significant Code Changes Part 5: 1 PDH (On-Demand Webinar)

    $10.00
    Add to cart
    Part 5 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2017 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2014 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC for chapter 7, 8, and 9. The student will be identifying chapters, articles, and tables of where and what significant changes occurred (be it an addition, revision, or deleting), the student will review the 2017 version of the updated text, and understand the reason for the change with an explanatory brief.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Become familiar with some of the significant changes including additions, deletions, and modification to the 2017 Edition of NFPA 70: National Electrical Code (NEC) from the 2014 Edition for Chapter 7 through chapter 9
      • Comprehend, after reviewing the significant changes and additions to the 2017 Edition of NFPA 70: National Electrical Code (NEC) the large scope of the changes to the code, thereby seeking additional and more thorough reviews of the entire code

    CERTIFICATE OF COMPLETION

    This 1 hour (50 min) on-demand webinar satisfies timed and monitored instruction required for Ohio Licensed Professional Engineers. Upon completion all attendees will able to immediately print a certificate of completion. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the Ondemand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a personal accountability statement and a certificate of completion will be immediately generated.
    You may print or save your certificate or access anytime within your account.