Tennessee Packages
- Sale!
Five Civil Engineering courses plus Tennessee Laws, Rules & Ethics course that will earn 24 PDH guaranteed to be accepted by the Tennessee Board of Architectural and Engineering Examiners.Instructor: Raymond Bosek, PETennessee – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Tennessee State Board of Architectural and Engineering Laws, Rules & Policies, including Professional Engineering Ethics.
Accident and Operational Safety Analysis: 4 PDH
In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.
Gravel Road Construction: 4 PDH
It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.
Lessons Learned-Design and Construction of Buildings: 3 PDH
In this course the student will review lessons learned from post building occupancy evaluations to understand common building design and/or construction flaws and review essential tips to correct, avoid and/or mitigate these occurrences.
Residential Structural Design: 5 PDH
In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.
Sustainable Concrete Pavements: 5 PDH
In this course the student will understand concrete pavement sustainability concepts and recommended practices for maximizing the sustainability of concrete pavements.
Preview Course: Tennessee Laws, Rules and Ethics
Preview Course: Accident and Operational Safety Analysis
Preview Course: Gravel Road Construction
Preview Course: Lessons Learned-Design and Construction of Buildings
Preview Course: Residential Structural Design
Preview Course: Sustainable Concrete Pavements - Sale!Five Civil Engineering courses plus Tennessee Laws, Rules & Ethics course that will earn 24 PDH guaranteed to be accepted by the Tennessee Board of Architectural and Engineering Examiners.Instructor: Raymond Bosek, PE
Tennessee – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Tennessee State Board of Architectural and Engineering Laws, Rules & Policies, including Professional Engineering Ethics.
Stress and Strain in Soils: 4 PDH
In this course the student will understand the properties and mechanics of soils and accurately calculate the stresses and deformations of soil masses.
Geotechnical Subsurface Exploration for Roadways: 5 PDH
In this course the student will understand the essentials of subsurface explorations for roadways with a comprehensive overview including site preparation, sampling methods, types of testing and methods, as well as standard guidelines and recommendations.
Engineering Description of Soils and Rocks: 4 PDH
In this course the student will understand the engineering characteristics of soils and rocks and to how to properly identify and classify to develop a subsurface profile for site evaluations.
Slope Stability in Embankments and Structures: 5 PDH
In this course the student will understand the design of slope stability in embankments and structures and how to recognize, analyze, and solve slope instability issues encountered.
Strategies for Improving Sustainability of Asphalt Pavements: 3 PDH
In this course the student will understand sustainability throughout the entire pavement life cycle and the importance of recognizing context sensitivity and assessing trade-offs in developing sustainable solutions.
Preview Course: Tennessee Laws, Rules and Ethics
Preview Course: Stress and Strain in Soils
Preview Course: Geotechnical Subsurface Exploration for Roadways
Preview Course: Engineering Description of Soils and Rocks
Preview Course: Slope Stability in Embankments and Structures
Preview Course: Strategies for Improving Sustainability of Asphalt Pavements - Sale!
Five Electrical Engineering courses plus Tennessee Laws, Rules & Ethics course that will earn 24 PDH guaranteed to be accepted by the Tennessee Board of Architectural and Engineering Examiners.Instructor: Juan Pesante, PETennessee – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Tennessee State Board of Architectural and Engineering Laws, Rules & Policies, including Professional Engineering Ethics.
2023 NEC Significant Code Changes Part 1: 4 PDH
Part 1 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).
2023 NEC Significant Code Changes Part 2: 4 PDH
Part 2 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).
Blockchain Technology Overview: 3 PDH
In this course the student will be introduced to Blockchain technology, from its history and beginnings, through the various components, models, and make-up and finally its applications and limitations.
Electrical Safety: 5 PDH
In this course the student will understand the dangers and hazards when working with or near electrical power and approaches to work safely to avoid serious injury.
Forecasting Solar Radiation and Photovoltaic Power: 5 PDH
Solar resource forecasting is critical for the operation and management of solar power plants and electric grids. In this course the student will understand the basic concepts and various methods of solar irradiance forecasting as well as forecasting the power production of Photovoltaic (PV) power plants.
Preview Course: Tennessee Laws, Rules and Ethics
Preview Course: 2023 NEC Significant Code Changes Part 1
Preview Course: 2023 NEC Significant Code Changes Part 2
Preview Course: Blockchain Technology Overview
Preview Course: Electrical Safety
Preview Course: Forecasting Solar Radiation and Photovoltaic Power - Sale!Five Electrical Engineering courses plus Tennessee Laws, Rules & Ethics course that will earn 24 PDH guaranteed to be accepted by the Tennessee Board of Architectural and Engineering Examiners.Instructor: Juan Pesante, PE
Tennessee – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Tennessee State Board of Architectural and Engineering Laws, Rules & Policies, including Professional Engineering Ethics.
Analysis of National Charging infrastructure for Electric Vehicles: 3 PDH
This courses addresses the fundamental question of how much plug-in electric vehicle (PEV) charging infrastructure is needed in the United States to support both plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs). In this course the student will understand PEV charging infrastructure requirements and analyze a range of plausible scenarios that consider the relationship between the evolution of the PEV fleet and charging infrastructure.
Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH
In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.
Energy Storage Technology Cost and Performance: 4 PDH
In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).
Electrical Storage Guide for Electrical Engineers: 5 PDH
This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.
Electrification-Power System Evolution and Infrastructure Development: 5 PDH
In this course the student will understand Electrification, the shift from non-electric to electric sources of energy at the point of final consumption, and an analysis of the potential impacts of widespread electrification on the evolution of the U.S. electricity system. This course follows the guide: Electrification Futures Study: Scenarios of Power System Evolution and Infrastructure Development for the United States, published by the National Renewable Energy Laboratory.
Preview Course: Tennessee Laws, Rules and Ethics
Preview Course: Analysis of National Charging infrastructure for Electric Vehicles
Preview Course: CAES and PSH Concepts
Preview Course: Energy Storage Technology Cost and Performance
Preview Course: Electrical Storage Guide for Electrical Engineers
Preview Course: Electrification-Power System Evolution and Infrastructure Development - Sale!
Five Mechanical Engineering courses plus Tennessee Laws, Rules & Ethics course that will earn 24 PDH guaranteed to be accepted by the Tennessee Board of Architectural and Engineering Examiners.Instructor: Seth Grablow, PETennessee – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Tennessee State Board of Architectural and Engineering Laws, Rules & Policies, including Professional Engineering Ethics.
Accident and Operational Safety Analysis: 4 PDH
In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.
Boiler Basics-Operation and Maintenance: 5 PDH
In this course the student will understand steam generation, boilers and boiler components, and basic concepts in their operation and maintenance.
Fire Protection Systems: 3 PDH
In this course the student will understand fire protection systems and fire protection system operations and will be able to familiarize themselves with the various systems and components including operations and maintenance/ inspection procedures.
Improving Motor and Drive System Performance: 5 PDH
This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.
Principles of Hydraulic and Pneumatic Systems: 4 PDH
In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.
Preview Course: Tennessee Laws, Rules and Ethics
Preview Course: Accident and Operational Safety Analysis
Preview Course: Boiler Basics-Operation and Maintenance
Preview Course: Fire Protection Systems
Preview Course: Improving Motor and Drive System Performance
Preview Course: Principles of Hydraulic and Pneumatic Systems - Sale!Five Mechanical Engineering courses plus Tennessee Laws, Rules & Ethics course that will earn 24 PDH guaranteed to be accepted by the Tennessee Board of Architectural and Engineering Examiners.Instructor: Seth Grablow, PE
Tennessee – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Tennessee State Board of Architectural and Engineering Laws, Rules & Policies, including Professional Engineering Ethics.
Systems Engineering Fundamentals Part 1: 5 PDH
Part one of a two-part course, this course provides a thorough overview of the systems engineering process and presents a in-depth review of the tools and processes to to develop a system efficiently and effectively and to support that system through its life cycle.
Systems Engineering Fundamentals Part 2: 5 PDH
Part two of a two-part course, this course provides a thorough overview of the systems engineering process and presents a in-depth review of the tools and processes to to develop a system efficiently and effectively and to support that system through its life cycle.
Improving Pumping System Performance: 4 PDH
This course provides a thorough overview of pumping systems and their components and practical guidelines to enhance performance and increase efficiency.
Improving Compressed Air System Performance: 4 PDH
This course provides a thorough overview of compressed air systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.
Coating Types and Characteristics of Metals: 3 PDH
In this course the student will understand the characteristics and applications of various industrial coatings and metal finishes.
Preview Course: Tennessee Laws, Rules and Ethics
Preview Course: Systems Engineering Fundamentals Part 1
Preview Course: Systems Engineering Fundamentals Part 2
Preview Course: Improving Pumping System Performance
Preview Course: Improving Compressed Air System Performance
Preview Course: Coating Types and Characteristics of Metals
