Alaska-Electrical Engineering Package: 24 PDH
$80.00
Alaska – Statutes, Regulations, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Alaska State Board of Registration for Architects, Engineers, and Land Surveyors Statutes and Regulations including Professional Engineering Ethics.
Analysis of National Charging infrastructure for Electric Vehicles: 3 PDH
This courses addresses the fundamental question of how much plug-in electric vehicle (PEV) charging infrastructure is needed in the United States to support both plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs). In this course the student will understand PEV charging infrastructure requirements and analyze a range of plausible scenarios that consider the relationship between the evolution of the PEV fleet and charging infrastructure.
Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH
In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.
Energy Storage Technology Cost and Performance: 4 PDH
In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).
Electrical Storage Guide for Electrical Engineers: 5 PDH
This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.
Electrification-Power System Evolution and Infrastructure Development: 5 PDH
In this course the student will understand Electrification, the shift from non-electric to electric sources of energy at the point of final consumption, and an analysis of the potential impacts of widespread electrification on the evolution of the U.S. electricity system. This course follows the guide: Electrification Futures Study: Scenarios of Power System Evolution and Infrastructure Development for the United States, published by the National Renewable Energy Laboratory.
Preview Course: Alaska Statutes, Regulations and Ethics
Preview Course: Analysis of National Charging infrastructure for Electric Vehicles
Preview Course: CAES and PSH Concepts
Preview Course: Energy Storage Technology Cost and Performance
Preview Course: Electrical Storage Guide for Electrical Engineers
Preview Course: Electrification-Power System Evolution and Infrastructure Development
Related Courses
- Sale!
Alaska-Civil Engineering Package #2: 24 PDH
$80.00 Add to cartFive Civil Engineering courses plus Alaska Statutes, Regulations & Ethics course that will earn 24 PDH guaranteed to be accepted by the Alaska State Board of Registration for Architects, Engineers, and Land Surveyors.Instructor: Raymond Bosek, PEAlaska – Statutes, Regulations, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Alaska State Board of Registration for Architects, Engineers, and Land Surveyors Statutes and Regulations including Professional Engineering Ethics.
Accident and Operational Safety Analysis: 4 PDH
In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.
Gravel Road Construction: 4 PDH
It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.
Lessons Learned-Design and Construction of Buildings: 3 PDH
In this course the student will review lessons learned from post building occupancy evaluations to understand common building design and/or construction flaws and review essential tips to correct, avoid and/or mitigate these occurrences.
Residential Structural Design: 5 PDH
In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.
Sustainable Concrete Pavements: 5 PDH
In this course the student will understand concrete pavement sustainability concepts and recommended practices for maximizing the sustainability of concrete pavements.
Preview Course: Alaska Statutes, Regulations and Ethics
Preview Course: Accident and Operational Safety Analysis
Preview Course: Gravel Road Construction
Preview Course: Lessons Learned-Design and Construction of Buildings
Preview Course: Residential Structural Design
Preview Course: Sustainable Concrete Pavements - Sale!
Alabama-Mechanical Engineering Package #2: 30 PDH
$90.00 Add to cartSix Mechanical Engineering courses plus Alabama Laws, Rules & Ethics course that will earn 30 PDH guaranteed to be accepted by the Alabama State Board of Licensure for Professional Engineers and Land Surveyors. Instructor: Seth Grablow, PEAlabama – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Alabama State Board of Licensure for Professional Engineers and Land Surveyors Laws and Rules, including Professional Engineering Ethics.
Accident and Operational Safety Analysis: 4 PDH
In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.
Boiler Basics-Operation and Maintenance: 5 PDH
In this course the student will understand steam generation, boilers and boiler components, and basic concepts in their operation and maintenance.
Engineering Human Performance Optimization in the Workplace: 4 PDH
In this course the student will understand the strategic approach for improving performance to reduce human error and manage controls so as to reduce unwanted events and/or mitigate their impact should they occur. The student will learn methods and techniques for catching and reducing errors and locating and eliminating latent organizational weaknesses.
Improving Motor and Drive System Performance: 5 PDH
This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.
Installation, Maintenance, and Repair of Water and Sewage Systems: 5 PDH
In this course the student will understand a facility’s water and sewage systems and associated common components as well as basic concepts in installing, maintaining, repairing and the operation and maintenance of these systems.
Principles of Hydraulic and Pneumatic Systems: 4 PDH
In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.
Preview Course: Alabama Laws, Rules and Ethics
Preview Course: Accident and Operational Safety Analysis
Preview Course: Boiler Basics-Operation and Maintenance
Preview Course: Engineering Human Performance Optimization in the Workplace
Preview Course: Improving Motor and Drive System Performance
Preview Course: Installation, Maintenance, and Repair of Water and Sewage Systems
Preview Course: Principles of Hydraulic and Pneumatic Systems
