Approach Roadway Deformations: 4 PDH

$24.00

In this course the student will understand roadway approach embankment design and construction and methods to mitigate deformations typically seen in these structure, including the infamous “bump” encountered at the approach to structure interface.Instructor: Raymond Bosek, PE

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

  • Explain typical approach roadway deformation problems
  • Discuss internal and external deformation
  • Understand computation of immediate and consolidation settlements
  • Explain deformation design solutions
  • Understand construction monitoring and quality assurance

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

Preview Course
Click “Preview Course” to view prior to purchase
Click “Add to Cart” to purchase
SKU: CV1425 Categories: , , ,
How to take Course

Preview course material Puchase to access Quixz

Related Courses

  • Deterioration of Concrete: 2 PDH

    Deterioration of Concrete: 2 PDH

     $12.00 Add to cart
    In this course, the student will review Chapter 3, Causes of Distress and Deterioration of Concrete from Engineer Manual (EM) 1110-2-2002, “Engineering and Design – Evaluation and Repair of Concrete Structures” published by the U.S. Army Corp of Engineers (issued 30 June 1995). This course is most relevant to engineers wishing to attain knowledge on the most common causes of problems in concrete. The course also provides a brief description of the basic mechanism of each common problem, a description of the typical symptoms that would be observed during a visual inspection, and suggests preventative methods or techniques to prevent further damage.
    Instructor: Raymond Bosek, PE

    A basic understanding of the underlying causes of concrete deficiencies is essential to performing meaningful evaluations which lead to the proper selection of the method or technique used to successfully repair concrete. Symptoms or observations of a deficiency must be differentiated from the actual cause of the deficiency, and it is imperative that causes and not symptoms be addressed in repairs. Deterioration of concrete is an extremely complex subject since, in most cases, the damage detected will be the result of more than one mechanism.

    In this course, the student will review Chapter 3, Causes of Distress and Deterioration of Concrete from Engineer Manual (EM) 1110-2-2002, “Engineering and Design – Evaluation and Repair of Concrete Structures” published by the U.S. Army Corp of Engineers (issued 30 June 1995). This course is most relevant to engineers wishing to attain knowledge on the most common causes of problems in concrete. The course also provides a brief description of the basic mechanism of each common problem, a description of the typical symptoms that would be observed during a visual inspection, and suggests preventative methods or techniques to prevent further damage.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Common causes of concrete deterioration
    • Symptoms of concrete distress and deterioration that can be found during visual inspections
    • Preventative measures to reduce or eliminate further concrete degradation.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a ten (10) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hours (PDH) of continuing education.

    Preview Course
    Click” Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Design and Construction of Road Tunnels-Part 2 Methodology and Excavation Support: 5 PDH

     $30.00 Add to cart
    In this course the student will understand the construction methodology and excavation support systems for cut-and-cover road tunnels, design and construction issues for rock and soft ground tunneling, and the special approaches that must be made when passing through difficult ground.
    Instructor: Raymond Bosek, PE
    In this course the student will understand the construction methodology and excavation support systems for cut-and-cover road tunnels, design and construction issues for rock and soft ground tunneling, and the special approaches that must be made when passing through difficult ground.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Cut and cover tunnels
    • Rock Tunneling
    • Softground tunneling
    • Difficult ground tunneling
    • Structural design and subsystems
    • Groundwater control
    • Tunnel support design
    • Permanent lining design
    • Soil stabilization
    • Instability and heaving loads

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a thirty (30) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
Scroll to Top