Basic Electrical and DC Theory: 9 PDH
$50.00
Do you know where electricity comes from? To be able to say yes to that question, you must understand a bit about the physics of matter. In this course you’ll learn the basics involving: matter, electron theory, magnetism, electromagnetism, the laws of electrical circuits, series circuits, parallel circuits, series-parallel circuits and the basic electrical formulas.
This course also introduces the basic electricity and electrical circuit concepts associated with direct current. Topics include calculation of current, voltage, resistance and power in series, parallel and combination circuits with direct current (DC) power sources.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- How is DC voltage produced and what does an electric circuit consist of
- What is a rectifier and how half-wave bridge rectifiers differ from full-wave bridge rectifiers
- What is the difference between a schematic diagram, one-line diagram, block diagram and wiring diagram
- What is resistivity and how temperature affects the resistance of materials
- What is the difference between open circuit, close circuit, and short circuit
- What primary characteristics identify a series, parallel or a combination circuit
- How to calculate the current and voltage drop in series, parallel or combination circuits
- How to calculate the equivalent resistance for a series, parallel or combination circuit
- What is meant by the terms voltage divider and current division
- How is electron flow theory different from conventional current theory
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 9 professional development hours (PDH) of continuing education.
Related Courses
Introduction to Electrical Design for Cathodic Protection Systems: 4 PDH
$24.00 Add to cartThis is an introduction to design and application of cathodic protection systems to mitigate corrosion in underground steel structures such as tanks and pipelines. Topics that will be covered in this course are the two principle methods used to mitigate corrosion, an introduction to the steps designing a sacrificial anode system and impressed current system and the field testing requirements needed for both of these systems. This course is intended for engineers with a current or prospective need to understand the fundamentals of protecting underground structures from corrosion using sacrificial anode and impressed current cathodic protection systems.Instructor: Juan Pesante, PEThis is an introduction to design and application of cathodic protection systems to mitigate corrosion in underground steel structures such as tanks and pipelines. Topics that will be covered in this course are the two principle methods used to mitigate corrosion, an introduction to the steps designing a sacrificial anode system and impressed current system and the field testing requirements needed for both of these systems. This course is intended for engineers with a current or prospective need to understand the fundamentals of protecting underground structures from corrosion using sacrificial anode and impressed current cathodic protection systems.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Learn the nine steps in designing a sacrificial anode system
- Learn the thirteen steps in designing an impressed current system
- Learn how to conduct field testing requirements for both of these systems
- Calculations for current requirements, life expectancy, rectifier voltage, and anodes needed
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.
Preview CourseClick “Preview Course” to View Prior to PurchaseClick “Add to Cart” to Purchase and Access QuizA Guide to Offshore Wind Energy: 2 PDH
$12.00 Add to cartOffshore wind turbines harness the energy of the ocean winds and turn it into electricity. This course introduces the basic principles of proposed US offshore wind facilities. The course summarizes a study conducted by EESI of existing European and Asian offshore wind farms. The topics addressed include technical issues related to marine foundations and structures, transmission issues unique to offshore power generation, political and regulatory issues and the public's perceptions of proposed offshore wind farms. This course demonstrates that offshore wind energy has been successfully implemented in other parts of the world and that the potential for wind farms in U.S. waters is favorable.Instructor: Juan Pesante, PEOffshore wind turbines harness the energy of the ocean winds and turn it into electricity. This course introduces the basic principles of proposed US offshore wind facilities. The course summarizes a study conducted by EESI of existing European and Asian offshore wind farms. The topics addressed include techinical issues related to marine foundations and structures, transmission issues unique to offshore power generation, political and regulatory issues and the publics perceptions of proposed offshore wind farms. This course demonstrates that offshore wind energy has been successfully implemented in other parts of the world and that the potential for wind farms in U.S. waters is favorable.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Awareness of the basic principles of Offshore Wind Energy
- Awareness of the geographic areas in the U.S. that are canidates for wind farms
- Learn the affects of wind farms on commercial fishing and birds
- Public concerns about offshore wind farms relating to property values, local economy and jobs
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.
Preview CourseClick “Preview Course” to View Prior to PurchaseClick “Add to Cart” to Purchase and Access Quiz