Carbon Absorption of Volatile Organic Compounds: 3 PDH

Carbon Absorption of Volatile Organic Compounds: 3 PDH

$18.00

Carbon adsorption is used in air pollution control to remove volatile organic compounds (VOCs) from low to medium concentration gas streams, when stringent outlet concentration must be met and/or recovery of the VOC is desired. This course covers the types of adsorbers, adsorption theory, and design procedures for carbon adsorption equipment.
Instructor: Seth Grablow, PE

Carbon adsorption is used in air pollution control to remove volatile organic compounds (VOCs) from low to medium concentration gas streams, when stringent outlet concentration must be met and/or recovery of the VOC is desired. This course covers the types of adsorbers, adsorption theory, and design procedures for carbon adsorption equipment.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

  • The types of carbon adsorption equipment and which are in most common use
  • Define an adsorption isotherm and be able to recognize the equation for the Freundlich isotherm
  • Adsorber sizing parameters
  • Make adsorption and desorption time calculations
  • Procedures for estimating carbon requirements
  • Cost estimation procedures for carbon adsorption systems

    • CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
SKU: AP203-24 Categories: , ,

Related Courses

  • Deterioration of Concrete: 2 PDH

    Deterioration of Concrete: 2 PDH

     $12.00 Add to cart
    In this course, the student will review Chapter 3, Causes of Distress and Deterioration of Concrete from Engineer Manual (EM) 1110-2-2002, “Engineering and Design – Evaluation and Repair of Concrete Structures” published by the U.S. Army Corp of Engineers (issued 30 June 1995). This course is most relevant to engineers wishing to attain knowledge on the most common causes of problems in concrete. The course also provides a brief description of the basic mechanism of each common problem, a description of the typical symptoms that would be observed during a visual inspection, and suggests preventative methods or techniques to prevent further damage.
    Instructor: Raymond Bosek, PE

    A basic understanding of the underlying causes of concrete deficiencies is essential to performing meaningful evaluations which lead to the proper selection of the method or technique used to successfully repair concrete. Symptoms or observations of a deficiency must be differentiated from the actual cause of the deficiency, and it is imperative that causes and not symptoms be addressed in repairs. Deterioration of concrete is an extremely complex subject since, in most cases, the damage detected will be the result of more than one mechanism.

    In this course, the student will review Chapter 3, Causes of Distress and Deterioration of Concrete from Engineer Manual (EM) 1110-2-2002, “Engineering and Design – Evaluation and Repair of Concrete Structures” published by the U.S. Army Corp of Engineers (issued 30 June 1995). This course is most relevant to engineers wishing to attain knowledge on the most common causes of problems in concrete. The course also provides a brief description of the basic mechanism of each common problem, a description of the typical symptoms that would be observed during a visual inspection, and suggests preventative methods or techniques to prevent further damage.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Common causes of concrete deterioration
    • Symptoms of concrete distress and deterioration that can be found during visual inspections
    • Preventative measures to reduce or eliminate further concrete degradation.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Preview Course
    Click” Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Concepts for Advanced Electrical Knowledge & Practical Troubleshooting: 8 PDH

     $40.00 Add to cart
    In this course, applicable to all professional engineering backgrounds, the student will understand the concepts of electricity and mechanism and design of electronics. They will understand how electrical components work from theory to design to the operation of common industrial circuits with tips for practical troubleshooting.Instructor: Juan Pesante, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the concepts of electricity & electronic theory
    • Understand electromagnetism and electromotive force
    • Understand current, voltage, and resistance in circuits
    • Explain DC & AC circuit analysis
    • Discuss capacitance and inductance
    • Understand DC & AC measuring instruments and concepts
    • Explain circuit analysis and troubleshooting circuits

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies eight professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
Scroll to Top