Coating Types and Characteristics of Metals: 3 PDH
$18.00
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Discuss various metal coating types and characteristics
- Explain film-forming mechanisms and binders
- Understand driers, pigments, solvents, and miscellaneous additives
- Explain zinc-rich coatings and VOCs
- Understand powder coating, thermal sprays, galvanizing, etc.
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.
Related courses
-
Nevada-Land Surveyors’s Package: 30 PDH
$180.00$90.00 Add to cartEight Land Surveying courses courses that will earn 30 PDH guaranteed to be accepted by the Nevada Board of Licensure of Professional Engineers and Professional Land Surveyors Instructor: Raymond Bosek, PELand Surveyor’s Ethics: 2 PDH
In this ethics course the student will understand the standards of professional behavior for adherence to the highest ethical conduct and revisit the emphasis that the holder of a professional license has a direct and vital impact on the safety, health, and welfare of the public.
Public Land Survey: Rectangular System: 8 PDH
In this course the student will review the rectangular surveying system which has been used continuously in the United States since 1785. As all facets of this system occasionally come into use, the student will become well versed in the field procedures of conducting an original survey covering both historical and current methods.
Aerial Photogrammetry: 5 PDH
In this course the student will understand procedural guidance, technical specifications, and quality control (QC) criteria for performing aerial photogrammetric mapping activities.
Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors : 4 PDH
This course is an introduction of using sUAS in land surveying. From FAA licensing requirements to common sUAS products and software, with an understanding of these basics a land surveyor can easily get started in using this up and coming technology.
Airborne Topographic LiDAR: 3 PDH
In this course the student will review the principles of Airborne Topographic LiDAR and learn how to utilize methods to employ this technology in the field.
Construction Surveying Curves: 3 PDH
In this course the student will learns to locate points using angles and distances for establishing curves. An essential tool in construction surveying when determining the line of a curve for road layout or some other type of curved construction.
Description of Lands: 3 PDH
This course provides guidance for documenting accurate boundary descriptions and locations by survey in the standards followed for Executive and public land orders and proclamations.
Corner Restoration Fundamentals: 2 PDH
In this course the student will understand the understand federal guidelines of resurveying corner monuments and the procedures and laws to successfully reestablish these boundaries.
Preview Course: Land Surveyor’s Ethics
Preview Course: Public Land Survey: Rectangular System
Preview Course: Aerial Photogrammetry
Preview Course: Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors
Preview Course: Airborne Topographic LiDAR
Preview Course: Construction Surveying Curves
Preview Course: Description of Lands
Preview Course: Corner Restoration Fundamentals
-
Michigan-Mechanical Engineering Package #2: 30 PDH
$180.00$90.00 Add to cartFour Mechanical Engineering courses plus Michigan Statutes, Regulations, and Ethics course that will earn 30 PDH guaranteed to be accepted by the Michigan Department of Licensing and Regulatory Affairs Instructor: Seth Grablow, PEMichigan – Statutes, Regulations, and Ethics for Professional Engineers: 3 PDH
Preview Course: Michigan Statutes, Regulations, & Ethics
In this course the student will study the Michigan Department of Licensing and Regulatory Affairs Statutes & Regulations, including Professional Engineering Ethics.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
-
- The engineer’s guidelines for practicing within Michigan’s statutes and regulations
- The engineer’s duty to protect the public
- The engineer’s duty to make objective and truthful statements
- The engineer’s duty to limit practice to his or her field of competence
- The engineer’s duty to maintain client confidentiality
- The engineer’s responsibility to the profession
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.
Engineer’s Guide to Corrosion-Causes, Protection and Control: 8 PDH
Preview Course: Engineer’s Guide to Corrosion
In this course the student will understand the process of corrosion on metals from its causes and effects into protection and control. The student will understand corrosion on a variety of metals and methods to mitigate and control corrosion over the life of a material.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
-
-
- Discuss environmental factors that affect corrosion
- Understand the eight major forms of corrosion
- Discuss corrosion characteristics and properties of various common metals
- Explain corrosion protection and methods of control
- Discuss monitoring of corrosion and available inspection technologies
- Understand the electrochemistry, kinetics, and thermodynamics of the corrosion process
-
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 8 professional development hours (PDH) of continuing education.
Essentials of Heating and Cooling of Buildings: 7 PDH
Preview Course: Essentials of Heating and Cooling of Buildings
In this course the student will understand all elements effecting heating and cooling of structures and to properly calculate loads and loss for ideal thermal comfort.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
-
-
- Discuss the human body, human heat transfer, and thermal comfort
- Understand design conditions for heating and cooling
- Understand heat gain, heat loss, and heat transfer of people and equipment
- Explain solar heat gain and transfer
- Discuss infiltration heat load and weatherizing
- Understand calculating heating and cooling requirements
- Understand annual energy consumption of a building
-
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 7 professional development hours (PDH) of continuing education.
Mechanical Systems Commissioning: 6 PDH
Preview Course: Mechanical Systems Commissioning
In this course the student will learn the various benefits commissioned mechanical equipment has to a facility by understanding the procedures in developing a commissioning program for mechanical equipment and the detailed processes effective in verifying proper system installation.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
-
- Discuss the need for commissioning mechanical equipment
- Understand the commissioning process
- Explain commissioning of HVAC equipment
- Explain commissioning of Generators And Ancillary Equipment
- Explain commissioning of Air Compressors And Pneumatic Control Systems
- Explain commissioning of Fire Suppression Systems
- Explain commissioning of Cranes And Elevators
- Explain commissioning of Water And Sewage Treatment Systems
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.
Solar Hot Water Systems Design: 6 PDH
Preview Course: Solar Hot Water Systems Design
This course will assist an engineer to understand the optimal and reliable configurations of solar water heating systems in different climates along with design specifications, planning principles, and guidelines for such systems that serve building clusters with significant domestic hot water needs.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
-
- Discuss solar energy and its constraints
- Understand solar hot water thermal system configurations
- Discuss applications in the government sector
- Explain solar hot water design and design considerations
- Discuss solar hot water system performance
- Understand solar hot water system maintenance
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.
Preview Course: Michigan Statutes, Regulations, & Ethics
Preview Course: Engineer’s Guide to Corrosion
Preview Course: Essentials of Heating and Cooling of Buildings
Preview Course: Mechanical Systems Commissioning
Preview Course: Solar Hot Water Systems DesignClick “Preview Course” to view prior to purchaseClick “Add to Cart” to purchase -