Conduits, Culverts, and Pipes Part I: 4 PDH
Conduits, Culverts, and Pipes Part I: 4 PDH

Conduits, Culverts, and Pipes Part I: 4 PDH

$24.00

Part I of a two-part series. This course provides guidance on the design and construction of conduits, culverts, and pipes, and the design procedures for trench/embankment earth loadings, highway loadings, railroad loadings, surface concentrated loadings, internal/external fluid pressures, cast-in-place conduits for dams, circular reinforced concrete pipe for small dams and levees, and corrugated metal pipe for rural levees and culverts.
Instructor: Raymond Bosek, PE

Part I of a two-part series. This course provides guidance on the design and construction of conduits, culverts, and pipes, and the design procedures for trench/embankment earth loadings, highway loadings, railroad loadings, surface concentrated loadings, internal/external fluid pressures, cast-in-place conduits for dams, circular reinforced concrete pipe for small dams and levees, and corrugated metal pipe for rural levees and culverts.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

  • Material selection
  • Installation methods
  • Loadings
  • Method of analysis
  • Joints & camber
  • Life cycle design

    • CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
SKU: CV904-25 Categories: ,

Related Courses

  • Roundabouts Part 2: 5 PDH

     $30.00 Add to cart
    This is part II of a three-part series. The second course covering chapters 3, 4, & 5 of Roundabouts: An Informational Guide from the Federal Highway Administration. This course provides an in-depth look into planning a roundabout and what factors to account for when designing it. Also, it covers what is necessary to operate a successful roundabout and the cause and effect of different features. Last, you will understand the differences in safety between roundabouts and signalized intersections.
    Instructor: Raymond Bosek, PE

    This is part II of a three-part series. The second course covering chapters 3, 4, & 5 of Roundabouts: An Informational Guide from the Federal Highway Administration. This course provides an in-depth look into planning a roundabout and what factors to account for when designing it. Also, it covers what is necessary to operate a successful roundabout and the cause and effect of different features. Last, you will understand the differences in safety between roundabouts and signalized intersections.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Planning and design of roundabouts
    • Comparing operational performance
    • Space and economic evaluations
    • Traffic operations
    • Performance Analysis
    • Safety and statistics
    • Crash prediction models

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) continuing education hour (CEH)/professional development hour (PDH) of continuing education.


    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Roundabouts Part 3: 5 PDH

     $30.00 Add to cart

    This is part III of a three-part series. The third course covering the final chapters 6, 7, & 8 of Roundabouts: An Informational Guide from the Federal Highway Administration. In this course the student will learn the many different ways to design a roundabout and what steps are taken to ensure the most efficient and safe roundabout for a given location. Also covered are the signage requirements, landscaping potential, and multi-roundabout systems that can be used when designing a roundabout.
    Instructor: Raymond Bosek, PE

    This is part III of a three-part series. The third course covering the final chapters 6, 7, & 8 of Roundabouts: An Informational Guide from the Federal Highway Administration. In this course the student will learn the many different ways to design a roundabout and what steps are taken to ensure the most efficient and safe roundabout for a given location. Also covered are the signage requirements, landscaping potential, and multi-roundabout systems that can be used when designing a roundabout.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Design principles
    • Geometric elements
    • Double-Lane, rural, and mini-roundabouts
    • Traffic design
    • Signage, markings, and illumination
    • Other design considerations
    • Crash prediction models

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) continuing education hour (CEH)/professional development hour (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

Shopping Cart
Scroll to Top