Conduits, Culverts, and Pipes Part I: 4 PDH
Conduits, Culverts, and Pipes Part I: 4 PDH

Conduits, Culverts, and Pipes Part I: 4 PDH

$24.00

Part I of a two-part series. This course provides guidance on the design and construction of conduits, culverts, and pipes, and the design procedures for trench/embankment earth loadings, highway loadings, railroad loadings, surface concentrated loadings, internal/external fluid pressures, cast-in-place conduits for dams, circular reinforced concrete pipe for small dams and levees, and corrugated metal pipe for rural levees and culverts.
Instructor: Raymond Bosek, PE

Part I of a two-part series. This course provides guidance on the design and construction of conduits, culverts, and pipes, and the design procedures for trench/embankment earth loadings, highway loadings, railroad loadings, surface concentrated loadings, internal/external fluid pressures, cast-in-place conduits for dams, circular reinforced concrete pipe for small dams and levees, and corrugated metal pipe for rural levees and culverts.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

  • Material selection
  • Installation methods
  • Loadings
  • Method of analysis
  • Joints & camber
  • Life cycle design

    • CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
SKU: CV904-26 Categories: ,

Related Courses

  • Gravel Road Construction: 4 PDH

     $24.00 Add to cart
    It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain gravel roadways routine maintenance and rehabilitation
      • Discuss drainage and its importance
      • Describe surface gravel types
      • Discuss dust control and stabilization
      • Recognize innovations and recent trends
      • Explain construction guidelines and gradation determination
      • Explain gravel road project quantity calculations
      • Discuss gravel deterioration and when to pave

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

  • Design of Heavy Duty Concrete Floor Slabs on Grade: 3 PDH

     $18.00 Add to cart
    This course describes the criteria for the design of concrete floor slabs on grade in buildings for heavy loads. Concrete floor slabs on grade are often subjected to heavy loads in buildings such as wall loads, stationary live loads and moving loads. The entire design procedure is based on a working stress concept. This course will provide the student with the criteria needed to design concrete floor slabs on grade subjected to heavy loads. Design examples are shown to aid in understanding the course material.
    Instructor: Raymond Bosek, PE

    This course describes the criteria for the design of concrete floor slabs on grade in buildings for heavy loads. Concrete floor slabs on grade are often subjected to heavy loads in buildings such as wall loads, stationary live loads and moving loads. The entire design procedure is based on a working stress concept. This course will provide the student with the criteria needed to design concrete floor slabs on grade subjected to heavy loads. Design examples are shown to aid in understanding the course material.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The steps required to design a heavy duty concrete floor slab
    • How to determine floor slab requirements for wall loads, stationary wall loads and moving loads
    • How to investigate the subgrade and environmental conditions relevant to the design
    • How to determine the modulus of subgrade reaction for various soils

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
Shopping Cart
Scroll to Top