Conduits, Culverts, and Pipes Part II: 4 PDH
Conduits, Culverts, and Pipes Part II: 4 PDH

Conduits, Culverts, and Pipes Part II: 4 PDH

$24.00

Part II of a two-part series. This course provides guidance on the design and construction of conduits, culverts, and pipes, and the design procedures for trench/embankment earth loadings, highway loadings, railroad loadings, surface concentrated loadings, internal/external fluid pressures, cast-in-place conduits for dams, circular reinforced concrete pipe for small dams and levees, and corrugated metal pipe for rural levees and culverts.
Instructor: Raymond Bosek, PE

Part II of a two-part series. This course provides guidance on the design and construction of conduits, culverts, and pipes, and the design procedures for trench/embankment earth loadings, highway loadings, railroad loadings, surface concentrated loadings, internal/external fluid pressures, cast-in-place conduits for dams, circular reinforced concrete pipe for small dams and levees, and corrugated metal pipe for rural levees and culverts.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

  • Material selection
  • Installation methods
  • Loadings
  • Method of analysis
  • Joints & camber
  • Life cycle design

    • CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

     

Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
SKU: CV904II-25 Category:

Related Courses

  • Systems Engineering Fundamentals Part 1: 5 PDH

     $30.00 Add to cart
    Part one of a two-part course, this course provides a thorough overview of the systems engineering process and presents a in-depth review of the tools and processes to to develop a system efficiently and effectively and to support that system through its life cycle. Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain systems engineering management
    • Understand the systems engineering process
    • Discuss requirement and functional analysis and allocation
    • Discuss systems engineering and the verification process
    • Explain the outputs of the systems engineering process
    • Understand work breakdown structure and configuration management

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Roundabouts Part 3: 5 PDH

     $30.00 Add to cart

    This is part III of a three-part series. The third course covering the final chapters 6, 7, & 8 of Roundabouts: An Informational Guide from the Federal Highway Administration. In this course the student will learn the many different ways to design a roundabout and what steps are taken to ensure the most efficient and safe roundabout for a given location. Also covered are the signage requirements, landscaping potential, and multi-roundabout systems that can be used when designing a roundabout.
    Instructor: Raymond Bosek, PE

    This is part III of a three-part series. The third course covering the final chapters 6, 7, & 8 of Roundabouts: An Informational Guide from the Federal Highway Administration. In this course the student will learn the many different ways to design a roundabout and what steps are taken to ensure the most efficient and safe roundabout for a given location. Also covered are the signage requirements, landscaping potential, and multi-roundabout systems that can be used when designing a roundabout.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Design principles
    • Geometric elements
    • Double-Lane, rural, and mini-roundabouts
    • Traffic design
    • Signage, markings, and illumination
    • Other design considerations
    • Crash prediction models

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) continuing education hour (CEH)/professional development hour (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

Shopping Cart
Scroll to Top