Design and Construction of Road Tunnels-Part 2 Methodology and Excavation Support: 5 PDH

$30.00

In this course the student will understand the construction methodology and excavation support systems for cut-and-cover road tunnels, design and construction issues for rock and soft ground tunneling, and the special approaches that must be made when passing through difficult ground.
Instructor: Raymond Bosek, PE
In this course the student will understand the construction methodology and excavation support systems for cut-and-cover road tunnels, design and construction issues for rock and soft ground tunneling, and the special approaches that must be made when passing through difficult ground.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

  • Cut and cover tunnels
  • Rock Tunneling
  • Softground tunneling
  • Difficult ground tunneling
  • Structural design and subsystems
  • Groundwater control
  • Tunnel support design
  • Permanent lining design
  • Soil stabilization
  • Instability and heaving loads

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a thirty (30) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
SKU: CV7052-22 Category:

Related Courses

  • Sale!

    Nevada-Land Surveyors’s Package: 30 PDH

     $90.00 Add to cart
    Eight Land Surveying courses courses that will earn 30 PDH guaranteed to be accepted by the Nevada Board of Licensure of Professional Engineers and Professional Land Surveyors Instructor: Raymond Bosek, PE

    Land Surveyor’s Ethics: 2 PDH

    In this ethics course the student will understand the standards of professional behavior for adherence to the highest ethical conduct and revisit the emphasis that the holder of a professional license has a direct and vital impact on the safety, health, and welfare of the public.

    Public Land Survey: Rectangular System: 8 PDH

    In this course the student will review the rectangular surveying system which has been used continuously in the United States since 1785. As all facets of this system occasionally come into use, the student will become well versed in the field procedures of conducting an original survey covering both historical and current methods.

    Aerial Photogrammetry: 5 PDH

    In this course the student will understand procedural guidance, technical specifications, and quality control (QC) criteria for performing aerial photogrammetric mapping activities.

    Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors : 4 PDH

    This course is an introduction of using sUAS in land surveying. From FAA licensing requirements to common sUAS products and software, with an understanding of these basics a land surveyor can easily get started in using this up and coming technology.

    Airborne Topographic LiDAR: 3 PDH

    In this course the student will review the principles of Airborne Topographic LiDAR and learn how to utilize methods to employ this technology in the field.

    Construction Surveying Curves: 3 PDH

    In this course the student will learns to locate points using angles and distances for establishing curves. An essential tool in construction surveying when determining the line of a curve for road layout or some other type of curved construction.

    Description of Lands: 3 PDH

    This course provides guidance for documenting accurate boundary descriptions and locations by survey in the standards followed for Executive and public land orders and proclamations.

    Corner Restoration Fundamentals: 2 PDH

    In this course the student will understand the understand federal guidelines of resurveying corner monuments and the procedures and laws to successfully reestablish these boundaries.


    Preview Course: Land Surveyor’s Ethics
    Preview Course: Public Land Survey: Rectangular System
    Preview Course: Aerial Photogrammetry
    Preview Course: Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors
    Preview Course: Airborne Topographic LiDAR
    Preview Course: Construction Surveying Curves
    Preview Course: Description of Lands
    Preview Course: Corner Restoration Fundamentals
  • Sale! Civil Engineering Courses

    Michigan-Civil Engineering Package: 30 PDH

     $90.00 Add to cart
    Six Civil Engineering courses plus Michigan Statutes, Regulations, & Ethics course that will earn 30 PDH guaranteed to be accepted by the Michigan Department of Licensing and Regulatory Affairs Instructor: Raymond Bosek, PE

    Michigan – Statutes, Regulations, and Ethics for Professional Engineers: 3 PDH

    Preview Course: Michigan Statutes, Regulations, & Ethics
    In this course the student will study the Michigan Department of Licensing and Regulatory Affairs Statutes & Regulations, including Professional Engineering Ethics.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • The engineer’s guidelines for practicing within Michigan’s statutes and regulations
      • The engineer’s duty to protect the public
      • The engineer’s duty to make objective and truthful statements
      • The engineer’s duty to limit practice to his or her field of competence
      • The engineer’s duty to maintain client confidentiality
      • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Pavement Design for Roads, Streets, Walks, and Open Storage Areas: 6 PDH

    Preview Course: Pavement Design
    This course provides guidance for design of pavements and supporting materials for roads, streets, walks and open storage areas. The contents include procedures for conducting preliminary site reconnaissance, traffic analyses, and criteria for the design of subgrade, subbase, base courses, flexible and rigid pavements.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Preliminary Soil Investigations
      • Vehicular Traffic Considerations
      • Flexible Pavement Materials & Subgrades
      • Bituminous Pavement
      • Flexible Pavement Design
      • Rigid Pavement Design
      • Concrete Pavement Design
      • Reinforced Concrete Pavements
      • Pavement Overlays
      • Joints For Plain & Reinforced Concrete
      • Roller-Compacted Concrete Pavements
      • Seasonal Frost Conditions

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

    Foundations in Expansive Soils: 6 PDH

    Preview Course: Foundations
    This course presents guidance and information for the geotechnical investigation necessary for the selection and design of foundations for heavy and light buildings constructed in expansive clay soil areas. The information in this course is generally applicable to many types of structures such as residences, warehouses, and multi-story buildings. Emphasis is given to the maintenance of an environment that encourages constant moisture conditions in the foundation soils during and following construction. Special attention must always be given to specific requirements of the structure such as limitations on allowable differential movement.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Guidelines of the geotechnical investigation and analysis
      • Field exploration
      • Laboratory investigations
      • Methodology for prediction of volume changes
      • Selection of the type of foundation
      • Structural details of design procedures provided for reference
      • Methods of minimizing foundation movement
      • Construction techniques and inspection Remedial repair of damaged structures

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

    Home Builders Guide to Earthquake Resistant Building Design: 5 PDH

    Preview Course: Homebuilders Guide
    In this course, the student will review Chapters 1-4 from “Homebuilders Guide to Earthquake Resistant Design and Construction”, FEMA 232 – June 2006 prepared by the Building Seismic Safety Council for the Federal Emergency Management Agency of the Department of Homeland Security.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Background & History
      • Above-Code Recommendations
      • International Residential Code & IRC Seismic Design Categories
      • Building Response & Concepts Concerning Site
      • Other Hazards including Coastal Hazards
      • Earthquake Resistant Requirements
      • IRC General Earthquake Limitations
      • Load Path
      • Lateral Capacities
      • House Configuration Irregularities
      • Foundation Requirements including Concrete Foundations & Masonry Foundations
      • Special Soil Conditions
      • Foundation Resistance to Sliding Loads
      • Special Considerations for Cut & Fill Sites
      • Foundation Design and Reinforcement
      • Interior Braced Walls Anchoring
      • Floor Design & Construction including Wood Frame, Cantilevered & Concrete Slab-On-Grade
      • Requirements for Blocking
      • Floor Sheathing

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 5 professional development hours (PDH) of continuing education.

    Conduits, Culverts, and Pipes Part I: 4 PDH

    Preview Course: Conduits I & II
    Part I of a two-part series. This course provides guidance on the design and construction of conduits, culverts, and pipes, and the design procedures for trench/embankment earth loadings, highway loadings, railroad loadings, surface concentrated loadings, internal/external fluid pressures, cast-in-place conduits for dams, circular reinforced concrete pipe for small dams and levees, and corrugated metal pipe for rural levees and culverts.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Material selection
      • Installation methods
      • Loadings
      • Method of analysis
      • Joints & camber
      • Life cycle design

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Conduits, Culverts, and Pipes Part II: 4 PDH

    Preview Course: Conduits I & II
    Part II of a two-part series. This course provides guidance on the design and construction of conduits, culverts, and pipes, and the design procedures for trench/embankment earth loadings, highway loadings, railroad loadings, surface concentrated loadings, internal/external fluid pressures, cast-in-place conduits for dams, circular reinforced concrete pipe for small dams and levees, and corrugated metal pipe for rural levees and culverts.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Material selection
      • Installation methods
      • Loadings
      • Method of analysis
      • Joints & camber
      • Life cycle design

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Deterioration of Concrete: 2 PDH

    Preview Course: Deterioration of Concrete
    In this course, the student will review Chapter 3, Causes of Distress and Deterioration of Concrete from Engineer Manual (EM) 1110-2-2002, “Engineering and Design – Evaluation and Repair of Concrete Structures” published by the U.S. Army Corp of Engineers (issued 30 June 1995). This course is most relevant to engineers wishing to attain knowledge on the most common causes of problems in concrete. The course also provides a brief description of the basic mechanism of each common problem, a description of the typical symptoms that would be observed during a visual inspection, and suggests preventative methods or techniques to prevent further damage.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Common causes of concrete deterioration
      • Symptoms of concrete distress and deterioration that can be found during visual inspections
      • Preventative measures to reduce or eliminate further concrete degradation.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    MichiganMichigan professional engineers are required to earn 30 PDH annually. All of the required hours can be earned through online continuing education courses. EZpdh.com courses are accepted by the Michigan Department of Licensing and Regulatory Affairs. The following table shows a quick rundown of license renewal requirements.

    Subject Requirement
    Hours Required 30 hours biennially
    Renewal Dates October 31 of Odd Years
    Course Approval The Board does not require pre-approval for providers or specific courses. Each engineer must determine whether an activity meets the Board’s requirements
    Course Content Courses must have a clear purpose and objective that will maintain, improve or expand the skills and knowledge relevant to the licensee’s area of practice. The Board’s Administrative rules (R 339.16041 Rule 41 [2][c]) specifically allow “Distance Learning,” which is defined as “courses where an instructor and a licensee may be apart and instruction takes place through online or electronic media” and states that there must be “access to an instructor during the course” (R 339.16041 Rule 41 [5][b]). EZpdh provides access to the qualified instructor by email at any time during the course. Our discussion with the Board indicates that this will satisfy the requirements
    Online Courses Accepted. For Professional Engineers, there is no limit on the number of PDHs that can be earned through online continuing education.
    PDH Carryover There is no provision for carryover hours
    Additional
    1. PDH completion records must be maintained for a minimum of 4 years. EZpdh helps you meet this requirement by providing you with the ability to instantly access and print a certificate upon successful completion of a course. Additionally, your certificates of completion are securely maintained by EZpdh for a minimum of seven years and can be accessed online at any time through your login account
    State Website Access State Website

    Preview Course: Michigan Statutes, Regulations, & EthicsPreview Course: Pavement DesignPreview Course: FoundationsPreview Course: Homebuilders GuidePreview Course: Conduits I & IIPreview Course: Deterioration of Concrete
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
Scroll to Top