Design and Construction of Road Tunnels-Part 2 Methodology and Excavation Support: 5 PDH

$30.00

In this course the student will understand the construction methodology and excavation support systems for cut-and-cover road tunnels, design and construction issues for rock and soft ground tunneling, and the special approaches that must be made when passing through difficult ground.
Instructor: Raymond Bosek, PE
In this course the student will understand the construction methodology and excavation support systems for cut-and-cover road tunnels, design and construction issues for rock and soft ground tunneling, and the special approaches that must be made when passing through difficult ground.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

  • Cut and cover tunnels
  • Rock Tunneling
  • Softground tunneling
  • Difficult ground tunneling
  • Structural design and subsystems
  • Groundwater control
  • Tunnel support design
  • Permanent lining design
  • Soil stabilization
  • Instability and heaving loads

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
SKU: CV7052-24 Categories: , , ,

Related Courses

  • Design of Hydraulic Steel Structures: 4 PDH

     $24.00 Add to cart
    Proper design, construction, and maintenance of hydraulic steel structures (HSS) is imperative for safe operation and reliable service over the structure’s lifetime. Engineers charged with the responsibility of maintaining these structures must be familiar with the basics of HSS design, as well as the intricacies of the structure’s abilities and limitations. This 4 hour interactive course prescribes guidance for (a) designing hydraulic steel structures (HSS) by load and resistance factor design (LRFD) and (b) fracture control. Allowable stress design (ASD) guidance is provided as an alternative design procedure or for those structure types where LRFD criteria have yet to be developed.
    Instructor: Raymond Bosek, PE

    Proper design, construction, and maintenance of hydraulic steel structures (HSS) is imperative for safe operation and reliable service over the structure’s lifetime. Engineers charged with the responsibility of maintaining these structures must be familiar with the basics of HSS design, as well as the intricacies of the structure’s abilities and limitations. This 4 hour interactive course prescribes guidance for (a) designing hydraulic steel structures (HSS) by load and resistance factor design (LRFD) and (b) fracture control. Allowable stress design (ASD) guidance is provided as an alternative design procedure or for those structure types where LRFD criteria have yet to be developed. Hydraulic steel structures are lock gates, tainter gates, tainter valves, bulkheads and stoplogs, vertical lift gates, components of hydroelectric and pumping plants, and miscellaneous structures such as lock wall accessories, local flood protection gates, and outlet works gates. HSS may be subject to submergence, wave action, hydraulic hammer, cavitation, impact, corrosion, and severe climatic conditions.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the benefits of the LRFD method over the ASD method of designs
    • List the modes of failure for HSS and what design principles are used to address these issues
    • Describe the types of HSS and their corresponding uses and allowable stress loads
    • Name the different types of HSS connections, including their design specifications and appropriate uses

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Corrosion Protection for Metal Fasteners in Coastal Areas: 3 PDH

     $18.00 Add to cart
    In this online course a student will understand material design and selection of metal fasteners and connectors on structures in coastal areas for increased corrosion-resistance.
    Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the importance of using corrosion-resistant metal connectors and fasteners in coastal areas
    • Discuss regulations and codes in corrosion resistance material selection for fasteners
    • Explain the causes of corrosion in coastal areas
    • Understand types of corrosion-resistant metal connectors and fasteners
    • Explain best practices for corrosion resistance

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) continuing education hour (CEH)/professional development hour (PDH) of continuing education.

    Preview Course
    Click” Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
Scroll to Top