Deterioration of Concrete: 2 PDH
$12.00
A basic understanding of the underlying causes of concrete deficiencies is essential to performing meaningful evaluations which lead to the proper selection of the method or technique used to successfully repair concrete. Symptoms or observations of a deficiency must be differentiated from the actual cause of the deficiency, and it is imperative that causes and not symptoms be addressed in repairs. Deterioration of concrete is an extremely complex subject since, in most cases, the damage detected will be the result of more than one mechanism.
In this course, the student will review Chapter 3, Causes of Distress and Deterioration of Concrete from Engineer Manual (EM) 1110-2-2002, “Engineering and Design – Evaluation and Repair of Concrete Structures” published by the U.S. Army Corp of Engineers (issued 30 June 1995). This course is most relevant to engineers wishing to attain knowledge on the most common causes of problems in concrete. The course also provides a brief description of the basic mechanism of each common problem, a description of the typical symptoms that would be observed during a visual inspection, and suggests preventative methods or techniques to prevent further damage.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Common causes of concrete deterioration
- Symptoms of concrete distress and deterioration that can be found during visual inspections
- Preventative measures to reduce or eliminate further concrete degradation.
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.
Related Courses
- Sale!
Pennsylvania-Civil Engineering Package: 24 PDH
Original price was: $144.00.$80.00Current price is: $80.00. Add to cartFive Civil Engineering courses plus Pennsylvania Rules, Regulations & Ethics course that will earn 24 PDH guaranteed to be accepted by the Pennsylvania State Board of Professional Engineers, Land Surveyors, and Geologists.Instructor: Raymond Bosek, PEPennsylvania – Rules, Regulations and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Pennsylvania State Board of Professional Engineers, Land Surveyors, and Geologists Statutes & Regulations, including Professional Engineering Ethics.
Stress and Strain in Soils: 4 PDH
In this course the student will understand the properties and mechanics of soils and accurately calculate the stresses and deformations of soil masses.
Geotechnical Subsurface Exploration for Roadways: 5 PDH
In this course the student will understand the essentials of subsurface explorations for roadways with a comprehensive overview including site preparation, sampling methods, types of testing and methods, as well as standard guidelines and recommendations.
Engineering Description of Soils and Rocks: 4 PDH
In this course the student will understand the engineering characteristics of soils and rocks and to how to properly identify and classify to develop a subsurface profile for site evaluations.
Slope Stability in Embankments and Structures: 5 PDH
In this course the student will understand the design of slope stability in embankments and structures and how to recognize, analyze, and solve slope instability issues encountered.
Strategies for Improving Sustainability of Asphalt Pavements: 3 PDH
In this course the student will understand sustainability throughout the entire pavement life cycle and the importance of recognizing context sensitivity and assessing trade-offs in developing sustainable solutions.
Preview Course: Pennsylvania Rules, Regulation and Ethics
Preview Course: Stress and Strain in Soils
Preview Course: Geotechnical Subsurface Exploration for Roadways
Preview Course: Engineering Description of Soils and Rocks
Preview Course: Slope Stability in Embankments and Structures
Preview Course: Strategies for Improving Sustainability of Asphalt Pavements - Sale!
Nevada-Mechanical Engineering Package #2: 30 PDH
Original price was: $180.00.$90.00Current price is: $90.00. Add to cartSix Mechanical Engineering courses plus Nevada Ethics and Statutes & Codes course that will earn 30 PDH guaranteed to be accepted by the Nevada Board of Licensure of Professional Engineers and Professional Land Surveyors.Instructor: Seth Grablow, PENevada – Ethics including NV Statutes and Codes for Professional Engineers: 4 PDH
This course satisfies the Nevada continuing education requirement of two (2) professional development hours in professional ethics and one (1) professional development hours in provisions of NAC 625 & NRS 625, (ref. Nevada Administrative Code 625.40)In this course the student will study two ethics courses including the Nevada State Board of Professional Engineers and Land Surveyors Statutes and Codes.Accident and Operational Safety Analysis: 4 PDH
In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.
Boiler Basics-Operation and Maintenance: 5 PDH
In this course the student will understand steam generation, boilers and boiler components, and basic concepts in their operation and maintenance.
Fire Protection Systems: 3 PDH
In this course the student will understand fire protection systems and fire protection system operations and will be able to familiarize themselves with the various systems and components including operations and maintenance/ inspection procedures.
Improving Motor and Drive System Performance: 5 PDH
This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.
Installation, Maintenance, and Repair of Water and Sewage Systems: 5 PDH
In this course the student will understand a facility’s water and sewage systems and associated common components as well as basic concepts in installing, maintaining, repairing and the operation and maintenance of these systems.
Principles of Hydraulic and Pneumatic Systems: 4 PDH
In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.
Preview Course: Nevada Ethics, Statutes & Codes
Preview Course: Accident and Operational Safety Analysis
Preview Course: Boiler Basics-Operation and Maintenance
Preview Course: Fire Protection Systems
Preview Course: Improving Motor and Drive System Performance
Preview Course: Installation, Maintenance, and Repair of Water and Sewage Systems
Preview Course: Principles of Hydraulic and Pneumatic Systems
