Deterioration of Concrete: 2 PDH

Deterioration of Concrete: 2 PDH

$12.00

In this course, the student will review Chapter 3, Causes of Distress and Deterioration of Concrete from Engineer Manual (EM) 1110-2-2002, “Engineering and Design – Evaluation and Repair of Concrete Structures” published by the U.S. Army Corp of Engineers (issued 30 June 1995). This course is most relevant to engineers wishing to attain knowledge on the most common causes of problems in concrete. The course also provides a brief description of the basic mechanism of each common problem, a description of the typical symptoms that would be observed during a visual inspection, and suggests preventative methods or techniques to prevent further damage.
Instructor: Raymond Bosek, PE

A basic understanding of the underlying causes of concrete deficiencies is essential to performing meaningful evaluations which lead to the proper selection of the method or technique used to successfully repair concrete. Symptoms or observations of a deficiency must be differentiated from the actual cause of the deficiency, and it is imperative that causes and not symptoms be addressed in repairs. Deterioration of concrete is an extremely complex subject since, in most cases, the damage detected will be the result of more than one mechanism.

In this course, the student will review Chapter 3, Causes of Distress and Deterioration of Concrete from Engineer Manual (EM) 1110-2-2002, “Engineering and Design – Evaluation and Repair of Concrete Structures” published by the U.S. Army Corp of Engineers (issued 30 June 1995). This course is most relevant to engineers wishing to attain knowledge on the most common causes of problems in concrete. The course also provides a brief description of the basic mechanism of each common problem, a description of the typical symptoms that would be observed during a visual inspection, and suggests preventative methods or techniques to prevent further damage.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

  • Common causes of concrete deterioration
  • Symptoms of concrete distress and deterioration that can be found during visual inspections
  • Preventative measures to reduce or eliminate further concrete degradation.

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

Preview Course
Click” Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
SKU: CV602-24 Categories: , ,

Related Courses

  • Storm Shelters & Safe Rooms: 1 PDH (On-Demand Webinar)

     $10.00 Add to cart
    This course presents engineers with important information about the design and construction of community and residential safe rooms that will provide protection during tornado and hurricane events. The course will center around design guides FEMA P-320, P-361, and ICC 500.
    Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Discuss Costs and Tolls of Tornado and Hurricane Disasters
      • Explain Assessing Risks of Tornado and Hurricane Disasters
      • Describe Storm Shelter/Safe Room Designs Guidelines in regards to location, flying debris resistance, flooding, etc.
      • Explain Storm Shelter/Safe Room Design Structural Design & Loading
      • Discuss FEMA Safe Room Plans

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the On-demand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
    You may print or save your certificate or access anytime within your account.

  • Design of Hydraulic Steel Structures: 4 PDH

     $24.00 Add to cart
    Proper design, construction, and maintenance of hydraulic steel structures (HSS) is imperative for safe operation and reliable service over the structure’s lifetime. Engineers charged with the responsibility of maintaining these structures must be familiar with the basics of HSS design, as well as the intricacies of the structure’s abilities and limitations. This 4 hour interactive course prescribes guidance for (a) designing hydraulic steel structures (HSS) by load and resistance factor design (LRFD) and (b) fracture control. Allowable stress design (ASD) guidance is provided as an alternative design procedure or for those structure types where LRFD criteria have yet to be developed.
    Instructor: Raymond Bosek, PE

    Proper design, construction, and maintenance of hydraulic steel structures (HSS) is imperative for safe operation and reliable service over the structure’s lifetime. Engineers charged with the responsibility of maintaining these structures must be familiar with the basics of HSS design, as well as the intricacies of the structure’s abilities and limitations. This 4 hour interactive course prescribes guidance for (a) designing hydraulic steel structures (HSS) by load and resistance factor design (LRFD) and (b) fracture control. Allowable stress design (ASD) guidance is provided as an alternative design procedure or for those structure types where LRFD criteria have yet to be developed. Hydraulic steel structures are lock gates, tainter gates, tainter valves, bulkheads and stoplogs, vertical lift gates, components of hydroelectric and pumping plants, and miscellaneous structures such as lock wall accessories, local flood protection gates, and outlet works gates. HSS may be subject to submergence, wave action, hydraulic hammer, cavitation, impact, corrosion, and severe climatic conditions.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the benefits of the LRFD method over the ASD method of designs
    • List the modes of failure for HSS and what design principles are used to address these issues
    • Describe the types of HSS and their corresponding uses and allowable stress loads
    • Name the different types of HSS connections, including their design specifications and appropriate uses

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
Scroll to Top