Engineer’s Guide to Corrosion-Causes, Protection and Control (Ohio Timed): 9 PDH
$54.00
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Discuss environmental factors that affect corrosion
- Understand the eight major forms of corrosion
- Discuss corrosion characteristics and properties of various common metals
- Explain corrosion protection and methods of control
- Discuss monitoring of corrosion and available inspection technologies
- Understand the electrochemistry, kinetics, and thermodynamics of the corrosion process
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a thirty (30) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies nine (9) professional development hours (PDH) of continuing education.
Related Courses
Grounding and Bonding of Electrical Systems (Ohio Timed): 4 PDH
$24.00 Add to cartThis online timed course satisfies Ohio R.C. section 4733.151In this course the student will review electrical system grounding and bonding issues associated with solidly grounded systems under 600V. This course can serve as an introduction to grounding and bonding for engineers with little or no professional electrical design experience. The course also presents practical, but not widely known, grounding and bonding application information that will benefit even the most seasoned electrical design professional.Instructor:Juan Pesante, PEIn this course the student will review electrical system grounding and bonding issues associated with solidly grounded systems under 600V. This course can serve as an introduction to grounding and bonding for engineers with little or no professional electrical design experience. The course also presents practical, but not widely known, grounding and bonding application information that will benefit even the most seasoned electrical design professional.
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.
Preview CourseClick “Preview Course” to View Prior to PurchaseClick “Add to Cart” to Purchase
Aerial Photogrammetry (Ohio Timed): 5 PDH
$30.00 Add to cartThis online timed course satisfies Ohio R.C. section 4733.151In this course the student will understand procedural guidance, technical specifications, and quality control (QC) criteria for performing aerial photogrammetric mapping activities.Instructor: Raymond Bosek, PESPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Discuss the fundamentals & principles of aerial photogrammetry
- Explain photographic scale, geometry and coordinate system equations
- Discuss operational procedures and standards
- Discuss all aspects of planning
- Explain aerial image acquisition & aerial triangulation
- Understand digital photogrammetric mapping workflow
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.
Preview CourseClick “Preview Course” to View Prior to PurchaseClick “Add to Cart” to Purchase and Access Quiz
