Exterior Electrical Power Distribution: 4 PDH
$24.00
This course provides an introduction to exterior electrical power distribution systems for buildings and related infrastructure. The information provided here can be utilized by electrical engineers in the development of the plans, specifications, and calculations, and can serve as the minimum electrical design requirements. It is applicable to the traditional electrical services customary for Design-Bid-Build construction contracts and for Design-Build construction contracts. Project conditions may dictate the need for a design that exceeds these minimum requirements. The design criteria and standards contained within are the minimum requirements acceptable for installations for efficiency, economy, durability, maintainability, and reliability of electrical power supply and distribution systems. The criteria and standards herein are not intended to be retroactively mandatory. After completing this course you will have gained knowledge of circuitry and electrical equipment found to power buildings and how to design an exterior electrical distribution systems for buildings.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Learn guidelines for selection of primary voltage
- Learn about main electric supply station
- Learn how design utilization electric supply stations differ from main electric supply stations
- Learn about primary unit substations to distribute underground medium voltage circuits
- Learn design criteria for secondary unit substations
- Learn guidelines for design and installation of pad-mounted transformers
- Learn about medium voltage switchgear
- Learn about application of pad-mounted sectionalizing termination cabinets
- Learn application and limitation guidelines for power factor correction or to minimize line losses
- Learn “best practices” for exterior electric power distribution
- Learn criteria for overhead power distribution lines
- Learn about the advantages and disadvantages of copper versus aluminum conductors for exterior electrical power distribution
- Learn when and where to apply surge arrestors
- Learn the fundamentals of fuse protection
- Learn about underground electrical distribution systems.
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.
Related Courses
Virginia – Laws, Rules, & Ethics for Professional Engineers: 3 PDH
$18.00 Add to cartIn this course the student will study the Virginia State APELSCIDLA Board Laws and Regulations, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.Instructor: Juan Pesante, PEIn this course the student will study the Virginia State APELSCIDLA Board Laws and Regulations, including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- The engineer's guidelines for practicing within Virginia's laws and rules
- The engineer’s duty to protect the public
- The engineer’s duty to make objective and truthful statements
- The engineer’s duty to limit practice to his or her field of competence
- The engineer’s duty to maintain client confidentiality
- The engineer’s responsibility to the profession
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.
Preview CourseClick “Preview Course” to view prior to purchaseClick “Add to Cart” to purchase- Sale!
Nevada-Electrical Engineering Package: 30 PDH
Original price was: $180.00.$90.00Current price is: $90.00. Add to cartSix Electrical Engineering courses plus Nevada Ethics and Statutes & Codes course that will earn 30 PDH guaranteed to be accepted by the Nevada Board of Licensure of Professional Engineers and Professional Land Surveyors.Instructor: Juan Pesante, PENevada – Ethics including NV Laws and Rules for Professional Engineers: 4 PDH
This course satisfies the Nevada continuing education requirement of two (2) professional development hours in professional ethics and one (1) professional development hour in provisions of NAC 625 & NRS 625, (ref. Nevada Administrative Code 625.40)In this course the student will study two ethics courses including the Nevada State Board of Professional Engineers and Land Surveyors Statutes and Codes. A total of thirty (30) questions will test his or her understanding of the subject.Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH
In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.
Energy Storage Technology Cost and Performance: 4 PDH
In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).
Electrical Storage Guide for Electrical Engineers: 5 PDH
This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.
Electrification-Power System Evolution and Infrastructure Development: 5 PDH
In this course the student will understand Electrification, the shift from non-electric to electric sources of energy at the point of final consumption, and an analysis of the potential impacts of widespread electrification on the evolution of the U.S. electricity system. This course follows the guide: Electrification Futures Study: Scenarios of Power System Evolution and Infrastructure Development for the United States, published by the National Renewable Energy Laboratory.
Best Practices for O&M of Photovoltaic and Energy Storage Systems: 5 PDH
In this course the student will understand how to reduce the cost and improve the effectiveness of operations and maintenance (O&M) for photovoltaic (PV) systems and combined PV and energy storage systems. The course follows the guide: Best Practices for O&M of Photovoltaic and Energy Storage Systems 3rd edition, published by the National Renewable Energy Laboratory.
Analysis of National Charging infrastructure for Electric Vehicles: 3 PDH
This courses addresses the fundamental question of how much plug-in electric vehicle (PEV) charging infrastructure is needed in the United States to support both plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs). In this course the student will understand PEV charging infrastructure requirements and analyze a range of plausible scenarios that consider the relationship between the evolution of the PEV fleet and charging infrastructure.
Preview Course: Nevada Ethics, Statutes & Codes
Preview Course: CAES and PSH Concepts
Preview Course: Energy Storage Technology Cost and Performance
Preview Course: Electrical Storage Guide for Electrical Engineers
Preview Course: Electrification-Power System Evolution and Infrastructure Development
Preview Course: Best Practices for O&M of Photovoltaic and Energy Storage Systems
Preview Course: Analysis of National Charging infrastructure for Electric Vehicles
