Florida-Civil Engineering Package #2 w/AFBC: 19 PDH
Original price was: $140.00.$90.00Current price is: $90.00.
Florida Laws & Rules for Professional Engineers: 1 CEH
- Florida Approved Course #0010038
- Approved Course for February 28, 2027 Renewal Deadline
- This course satisfies the one (1) hour laws and rules requirement
In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.
Florida Ethics for Professional Engineers: 1 CEH
- Florida Approved Course #0010039
- Approved Course for February 28, 2027 Renewal Deadline
- This course satisfies the one (1) hour ethics requirement
The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.
2023 Florida Advanced Building Code: Building – Significant Changes: 1 CEH
- Florida Building Commission Approved Course #1222
- This course satisfies retention of the “Special Qualifications” designation on your licensure record, pursuant to Section 471.0195, Florida Statutes.
This one (1) hour course covers and highlights some of the significant changes and updates in the 2023 8th Edition Florida Building Code: Building (FBC-B) which was recently updated from the 2020 FBC 7th Edition Florida Building Code: Building.
Accident and Operational Safety Analysis: 4 PDH
In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.
Gravel Road Construction: 4 PDH
It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.
Lessons Learned-Design and Construction of Buildings: 3 PDH
In this course the student will review lessons learned from post building occupancy evaluations to understand common building design and/or construction flaws and review essential tips to correct, avoid and/or mitigate these occurrences.
Residential Structural Design: 5 PDH
In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.
Preview Course: Florida Laws and Rules
Preview Course: Florida Ethics
Preview Course: 2023 Florida Advanced Building Code
Preview Course: Accident and Operational Safety Analysis
Preview Course: Gravel Road Construction
Preview Course: Lessons Learned-Design and Construction of Buildings
Preview Course: Residential Structural Design
Related Courses
- Sale!
Delaware-Civil Engineering Package #3: 24 PDH
Original price was: $144.00.$80.00Current price is: $80.00. Add to cartFive Civil Engineering courses plus Delaware Ethics including DE Laws and Rules for Professional Engineers that will earn 24 PDH guaranteed to be accepted by the Delaware's Professional Engineering Licensing Board. Instructor: Raymond Bosek, PEDelaware – Ethics including DE Laws and Rules for Professional Engineers: 4 PDH
This course satisfies the Delaware continuing education requirement of three (3) professional development hours in engineering ethics, (ref. DAPE Guidelines for Maintaining Continuing Professional Competency (CPC) Sec. E1).>In this course the student will study three (3) hours of ethics including one (1) hour of the Delaware Association of Professional Engineers Laws and Rules.Bridge Steels and their Mechanical Properties: 4 PDH
In this course the student will gain a comprehensive understanding of the types, properties, manufacturing processes, and performance characteristics of structural steels used in bridge construction. They will understand how various steel grades are selected based on mechanical properties, environmental conditions, and fabrication needs.
Continuously Reinforced Concrete Pavement: 5 PDH
In this course the student will understand the design, construction, maintenance, and rehabilitation of Continuously Reinforced Concrete Pavement (CRCP). They will grasp the critical principles governing CRCP performance, including crack control, reinforcement detailing, and the role of materials and environmental conditions in long-term pavement behavior.
Curing of Portland Cement Concrete Pavements: 4 PDH
In this course the student will gain detailed, research-based guidance on the curing process for concrete pavements, including pre-construction planning, methods of curing (initial and final), material selection, environmental considerations, and techniques to verify curing effectiveness. It emphasizes best practices to ensure long-term pavement performance and reduce early-life concrete distress.
Engineering Green Streets: 3 PDH
In this course the student will understand how to integrate green infrastructure practices into public rights‑of‑way—roads, alleys, sidewalks and parking areas—to better manage stormwater and too acquire the practical tools to design, implement and maintain effective, context‑sensitive stormwater solutions in transportation corridors.
Ultra-High Performance Concrete (UHPC): 4 PDH
In this course the student will understand the unique properties, design implications, and practical applications of Ultra-High Performance Concrete (UHPC), particularly in bridge infrastructure. They will grasp how UHPC differs from conventional concrete, including its superior strength, durability, and performance in extreme conditions.
- Sale!
Tennessee-Mechanical Engineering Package: 24 PDH
Original price was: $144.00.$80.00Current price is: $80.00. Add to cartFive Mechanical Engineering courses plus Tennessee Laws, Rules & Ethics course that will earn 24 PDH guaranteed to be accepted by the Tennessee Board of Architectural and Engineering Examiners. Instructor: Seth Grablow, PETennessee – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Tennessee State Board of Architectural and Engineering Laws, Rules & Policies, including Professional Engineering Ethics.
Systems Engineering Fundamentals Part 1: 5 PDH
Part one of a two-part course, this course provides a thorough overview of the systems engineering process and presents a in-depth review of the tools and processes to to develop a system efficiently and effectively and to support that system through its life cycle.
Systems Engineering Fundamentals Part 2: 5 PDH
Part two of a two-part course, this course provides a thorough overview of the systems engineering process and presents a in-depth review of the tools and processes to to develop a system efficiently and effectively and to support that system through its life cycle.
Improving Pumping System Performance: 4 PDH
This course provides a thorough overview of pumping systems and their components and practical guidelines to enhance performance and increase efficiency.
Improving Compressed Air System Performance: 4 PDH
This course provides a thorough overview of compressed air systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.
Coating Types and Characteristics of Metals: 3 PDH
In this course the student will understand the characteristics and applications of various industrial coatings and metal finishes.
Preview Course: Tennessee Laws, Rules and Ethics
Preview Course: Systems Engineering Fundamentals Part 1
Preview Course: Systems Engineering Fundamentals Part 2
Preview Course: Improving Pumping System Performance
Preview Course: Improving Compressed Air System Performance
Preview Course: Coating Types and Characteristics of Metals
