Florida Laws & Rules for Professional Engineers: 1 CEH

Preview Course: Florida Laws and Rules

In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• The engineer's guidelines for practicing within Florida's laws and rules
• Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium
• Florida Statutes: Changes to Chapter 455
• Florida Statutes: Changes to Chapter 471
• Disciplinary Cases Review

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

Florida Ethics for Professional Engineers: 1 CEH

Preview Course: Florida Ethics

The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• The engineer’s duty to protect the public
• The engineer’s duty to make objective and truthful statements
• The engineer’s duty to limit practice to his or her field of competence
• The engineer’s duty to maintain client confidentiality
• The engineer’s responsibility to the profession

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 continuing education hours (CEH).

Cost Benefit of ICF: 2 PDH

This online course is based on a guide that provides cost comparisons of ICF construction to standard residential wood-frame construction, a comprehensive cost analysis of the monthly costs of home ownership for wood-frame and ICF homes, and a detailed discussion regarding many of the structural and energy performance benefits gained through the use of ICFs.

The student must take a multiple-choice quiz consisting of ten (10) questions at the end of this course to earn PDH credits.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • Become familiar with ICF construction
  • Be made aware of the many benefits gained through the use of ICF construction
  • Comparative performance and cost comparison of ICF home vs wood frame home
  • Structral safety and hazard mitigation
  • Energy cost comparison of ICF home

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

Design of Commercial Buildings to Mitigate Terrorist Attacks: 4 PDH

This course provides guidance to engineers in methods to mitigate the effects of hazards resulting from terrorist attacks on new buildings. While focusing primarily on explosive attacks and design strategies to mitigate the effects of explosions, the course also addresses design strategies to mitigate the effects of chemical, biological and radiological attacks. In addition to the applicability to the design of new commercial office, retail, multi-family residential, and light-industrial buildings, many of the concepts presented are also applicable to other building types and/or existing buildings.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Design strategies to enhance life safety of building occupants
• Incremental steps to produce fully developed security measures
• Multi-disciplinary approach to security design
• Complex trade-offs required when designing security into a building

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

Design of Heavy Duty Concrete Floor Slabs on Grade: 3 PDH

This course describes the criteria for the design of concrete floor slabs on grade in buildings for heavy loads. Concrete floor slabs on grade are often subjected to heavy loads in buildings such as wall loads, stationary live loads and moving loads. The entire design procedure is based on a working stress concept. This course will provide the student with the criteria needed to design concrete floor slabs on grade subjected to heavy loads. Design examples are shown to aid in understanding the course material.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• The steps required to design a heavy duty concrete floor slab
• How to determine floor slab requirements for wall loads, stationary wall loads and moving loads
• How to investigate the subgrade and environmental conditions relevant to the design
• How to determine the modulus of subgrade reaction for various soils

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

Hurricane Mitigation: Summary Report On Building Performance: 3 PDH

After major hurricane disasters, the Federal Emergency Management Agency (FEMA) dispatches Building Performance Assessment Teams (BPATs) to evaluate the successes and failures of buildings to withstand the wind and flood forces of these storms. The teams document the results of their evaluations in building performance assessment reports. This 3-hour online course summarizes the BPAT reports for Hurricane Katrina.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • Describe the building and foundation types typically used in coastal areas
  • Illustrate the ability of various building and foundation types to withstand coastal surge, riverine flood, and hurricane winds
  • Explain design and construction practices that can reduce building damage in hurricanes
  • Describe construction practices that can reduce building damage in hurricanes

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

Deterioration of Concrete: 2 PDH

A basic understanding of the underlying causes of concrete deficiencies is essential to performing meaningful evaluations which lead to the proper selection of the method or technique used to successfully repair concrete. Symptoms or observations of a deficiency must be differentiated from the actual cause of the deficiency, and it is imperative that causes and not symptoms be addressed in repairs. Deterioration of concrete is an extremely complex subject since, in most cases, the damage detected will be the result of more than one mechanism.

In this course, the student will review Chapter 3, Causes of Distress and Deterioration of Concrete from Engineer Manual (EM) 1110-2-2002, “Engineering and Design – Evaluation and Repair of Concrete Structures” published by the U.S. Army Corp of Engineers (issued 30 June 1995). This course is most relevant to engineers wishing to attain knowledge on the most common causes of problems in concrete. The course also provides a brief description of the basic mechanism of each common problem, a description of the typical symptoms that would be observed during a visual inspection, and suggests preventative methods or techniques to prevent further damage.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Common causes of concrete deterioration
• Symptoms of concrete distress and deterioration that can be found during visual inspections
• Preventative measures to reduce or eliminate further concrete degradation.

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

Structural Design Criteria For Structures Other Than Buildings: 2 PDH

This two hour online course establishes structural design criteria for structures other than buildings, furnishes design guidance for various types of structures, and identifies special considerations with regard to certain materials in specific applications. Structures other than buildings which are covered in this course include the following: bridges; dock and harbor facilities; drainage structures; bulk material structures; water and wastewater structures; and mechanical, electrical, and communication structures. The course materials are based entirely on the Technical Manual TM 5-809-6/AFM 88-3 of Joint Departments of the Army and Air Force USA: Structural Design Criteria for Structures Other Than Buildings.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Know the common building materials used in construction
• Types of structures used in transportation, water & electrical distribution
• Support requirements for mechanical systems and bulk materials
• Design criteria for various types of structures
• Identify special considerations with regard to certain materials in specific applications.

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.