Iowa – Ethics including IA Laws and Rules for Professional Engineers: 4 PDH
$24.00
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- The engineer's guidelines for practicing within Iowa's codes and Rules
- The engineer’s duty to protect the public
- The engineer’s duty to make objective and truthful statements
- The engineer’s duty to limit practice to his or her field of competence
- The engineer’s duty to maintain client confidentiality
- The engineer’s responsibility to the profession
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a thirty (30) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.
Related Courses
-
Nevada-Environmental Engineering Package: 30 PDH
$180.00$90.00 Add to cartEleven Environmental Engineering courses plus Nevada Statutes, Codes, & Ethics course that will earn 30 PDH guaranteed to be accepted by the Nevada Board of Licensure of Professional Engineers and Professional Land SurveyorsInstructor: Raymond Bosek, PENevada – Statutes, Codes, & Ethics for Professional Engineers: 3 PDH
In this course the student will study the Nevada State Board of Professional Engineers and Land Surveyors Statutes and Codes, including Professional Engineering Ethics.
Process Design for Conversion of Biomass to Biofuels: 4 PDH
In this course you the student will understand the motivation, process, design, and cost of converting biomass into biofuel. The focus of this course is to find a plausible pathway to convert algal carbohydrates and lipids to fuel and to minimize cost during production.
Carbon Absorption of Volatile Organic Compounds: 3 PDH
Carbon adsorption is used in air pollution control to remove volatile organic compounds (VOCs) from low to medium concentration gas streams, when stringent outlet concentration must be met and/or recovery of the VOC is desired. This course covers the types of adsorbers, adsorption theory, and design procedures for carbon adsorption equipment.
Building Envelope Impact on HVAC Energy Use: 3 PDH
How airtight are the buildings you are responsible for? What is the energy load and indoor air quality like in your buildings? The only way to know is to perform a study. Despite common assumptions, measurements have shown that typical U.S. commercial buildings are not particularly airtight. In this course we present a recent simulation study on the impact of improving envelope airtightness in U.S. commercial buildings. You get documented, verifiable facts, report charts and graphs illustrating the findings, and a discussion from the report on the results of the study, Investigation of the Impact of Commercial Building Envelope Airtightness on HVAC Energy Use.
Fire Protection System Design: 3 PDH
This three (3) hour course overviews standards to design and build an environment for building occupants that is reasonably safe from fire and products of combustion as well as how to provide a reasonable level of building usability and property protection from the effects of fire and products of combustion.
Hurricane Mitigation: Summary Report On Building Performance: 3 PDH
After major hurricane disasters, the Federal Emergency Management Agency (FEMA) dispatches Building Performance Assessment Teams (BPATs) to evaluate the successes and failures of buildings to withstand the wind and flood forces of these storms. The teams document the results of their evaluations in building performance assessment reports. This 3-hour online course summarizes the BPAT reports for Hurricane Katerina.
A Guide to Offshore Wind Energy: 2 PDH
Offshore wind turbines harness the energy of the ocean winds and turn it into electricity. This course introduces the basic principles of proposed US offshore wind facilities. The course summarizes a study conducted by EESI of existing European and Asian offshore wind farms. The topics addressed include technical issues related to marine foundations and structures, transmission issues unique to offshore power generation, political and regulatory issues and the public’s perceptions of proposed offshore wind farms. This course demonstrates that offshore wind energy has been successfully implemented in other parts of the world and that the potential for wind farms in U.S. waters is favorable.
Hazardous Waste Identification: 2 PDH
This course covers hazardous waste regulated by the EPA under the Resource Conservation and Recovery Act (RCRA), starting with determining whether what waste is considered a solid waste according to the RCRA regulations and moving on to determining if it fits one of the RCRA requirements for being a hazardous waste.
Improving Energy Efficiency in Historic Buildings: 2 PDH
In this course the student will learn the general concept of the most efficient methods to enhance energy efficiency of historic buildings, while limiting the damage done during the rehabilitation process.
Ponds- Planning, Design, Construction: 2 PDH
This course provides guidance on some of the required criteria the United States Department of Agriculture (USDA) has in place for the planning, design, construction and maintenance of ponds. This course describes basic design principles of embankment and excavation ponds as well as construction requirements. This online PDH course is intended for hydrologists, civil engineers, agricultural engineers, construction engineers, municipal engineers, geotechnical engineers and environmental engineers.
Energy Performance of LEED for New Construction Buildings: 2 PDH
This course focuses on the measured energy performance for 121 LEED New Construction buildings, and compares the data to a variety of benchmarks, including Commercial Building Energy Consumption Survey (CBECS) averages, Energy Star ratings and modeled energy performance estimates provided with LEED submittals.
Wastewater Treatment Plants: 1 PDH
Package plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.
Preview Course: Nevada – Statutes, Codes, and Ethics
Preview Course: Process Design for Conversion of Biomass to Biofuels
Preview Course: Carbon Absorption of Volatile Organic Compounds
Preview Course: Building Envelope Impact on HVAC Energy Use
Preview Course: Fire Protection System Design
Preview Course: Hurricane Mitigation: Summary Report On Building Performance
Preview Course: A Guide to Offshore Wind Energy
Preview Course: Hazardous Waste Identification
Preview Course: Improving Energy Efficiency in Historic Buildings
Preview Course: Ponds-Planning, Design, Construction
Preview Course: Energy Performance of LEED for New Construction Buildings
Preview Course: Wastewater Treatment Plants
-
Nevada-Mechanical Engineering Package: 30 PDH
$180.00$90.00 Add to cartSix Mechanical Engineering courses plus Nevada Statutes, Codes, & Ethics course that will earn 30 PDH guaranteed to be accepted by the Nevada Board of Licensure of Professional Engineers and Professional Land Surveyors Instructor: Seth Grablow, PENevada – Statutes, Codes, & Ethics for Professional Engineers: 3 PDH
Preview Course: Nevada Statutes, Codes, & Ethics
In this course the student will study the Nevada State Board of Professional Engineers and Land Surveyors Statutes and Codes, including Professional Engineering Ethics.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
-
- The engineer’s guidelines for practicing within Nevada’s statutes and codes
- The engineer’s duty to protect the public
- The engineer’s duty to make objective and truthful statements
- The engineer’s duty to limit practice to his or her field of competence
- The engineer’s duty to maintain client confidentiality
- The engineer’s responsibility to the profession
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.
Thermodynamics: 8 PDH
Preview Course: Thermodynamics
This course provides a detailed overview of Thermodynamics Principles and Practices including thermodynamic principles in practical industrial, commercial and residential applications. The student will comprehend, analyze and solve various types of practical thermodynamic problems through several case studies. Laws, equations, graphs, charts, tables and diagrams, pertaining to various thermodynamics concepts, are covered and utilized in the analysis and solution of the case study problems.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
-
- Energy concepts and extension/application of the law of conservation of energy
- Conversion of thermal energy to electricity through steam turbines and electric generators
- Understanding and application of Steam Tables
- Fundamental and essential concepts such as entropy, enthalpy, heat of fusion, heat of sublimation, latent and sensible heat
- Thermodynamic processes
- Heat engine cycles
- Pyschrometric analysis based on psychrometric chart
- Refrigeration cycle related numerical analysis utilizing Pressure –Enthalpy Charts
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 8 professional development hours (PDH) of continuing education.
Heat Transfer: 4 PDH
Preview Course: Heat Transfer
The transfer of heat is an integral part of many industrial processes. Moreover, heat transfer affects our everyday lives – from an oven heating our dinner to the wind cooling us on a hot summer day. Thus, it is important that the engineer understands how to apply the basic principles of heat transfer to solve real-world problems.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
-
- Heat transfer definitions and terminology, including heat flux, thermal conductivity, LMTD, and heat transfer coefficients
- Conduction and the equivalent resistance formulas
- Convection and use of the overall heat transfer coefficient
- Radiant heat transfer, including black bodies, gray bodies and emissivity
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.
Fluid Flow: 4 PDH
Preview Course: Fluid Flow
Fluid flow and practical fluid mechanics is essential to any engineer’s knowledge base. This course will overview the basic principles of fluid flow including the three key attributes to solve all fluid problems. Bernoulli Equation will be discussed in detail to enable understanding of different types of energy in a fluid stream. Laminar and turbulent flow, head loss, and factors affecting head loss will also be dicussed in detail and explained with practical problems.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
-
- Shear Stress in a fluid
- Conservation of Mass
- Conservation of Momentum
- Reynolds number
- Laminar versus turbulent flow
- Bernoulli Equation
- Major head losses
- Minor head losses
- System level analysis
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.
Chillers, Refrigerant Compressors, and Heating Systems: 5 PDH
Preview Course: Chillers & Refrigerants
This course focuses on the equipment and equipment components used to generate heating and cooling. It does not include fans and pumps. This distinction is clear for most equipment types, such as unit heaters, boilers, and chillers. However, for packaged air-conditioning (AC) equipment the distinction can be subtle. Most packaged AC equipment is treated as a unit by performance rating procedures. Hence, separation of the fans is difficult. For this study, only the refrigerant compressors of packaged equipment are considered.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
-
- Accurate estimates of the energy used by primary cooling in the US commercial building sector
- Accurate estimates of the energy used by primary heating in the US commercial building sector
- Factors which contribute to energy use by the equipment
- Baseline estimate of current national energy use
- Calculation of the national energy savings impact
- Methods & options for reducing energy usage
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 5 professional development hours (PDH) of continuing education.
Diesel Engine Fundamentals I: 3 PDH
Preview Course: Diesel I & II
Part I of a two-part series. This course provides the engineer the basic understanding of the operation and design of Diesel Engines. The student will learning learn the fundamentals from the earlier history to the basic components which make up all diesel engines today.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
-
- Diesel engine history
- Differences to other combustible engines
- Major components
- Cooling systems
- Lubrication systems
- Fuel systems
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.
Diesel Engine Fundamentals II: 3 PDH
Preview Course: Diesel I & II
Part II of a two-part series. This course provides the engineer the basic understanding of the operation and design of Diesel Engines. The student will learn in depth, the diesel engine operation including an overview of all basic components as well as the different cycles and the operation of all essential systems of modern day diesel engines.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
-
- Exhaust system
- Operation terminology
- Compression ratio
- Basic diesel cycles
- Four & two stroke cycles
- Engine control
- Fuel control
- Engine protection
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.
Continuing Professional Competency (CPC) Requirements
Continuing Education or PDH is known as CPC in Nevada
Nevada professional engineers are required to earn 30 PDH biennially. All of the required hours can be earned through online continuing education courses. EZpdh.com courses are accepted by the Nevada State Board of Professional Engineers and Land Surveyors. The following table shows a quick rundown of license renewal requirements.State WebsiteAccess State Website
Subject Requirement Hours Required 30 hours biennially Renewal Dates January 1 of odd-numbered years for licensees whose last name begins with one of the letters A through E
July 1 of odd-numbered years for licensees whose last name begins with one of the letters F through K
January 1 of even-numbered years for licensees whose last name begins with one of the letters L through R
July 1 of even-numbered years for licensees whose last name begins with one of the letters S through ZCourse Approval The Board does not require pre-approval for providers or specific courses. Each engineer must determine whether an activity meets the Board’s requirements Course Content The Nevada Board website states that the “requirement for continuing professional competency (CPC) is intended to protect the public by reinforcing the need for lifelong learning in order to stay more current with changing technology, equipment, procedures, processes, tools, and established technical and business standards. The rule specifying qualifying CPC activities was designed to give flexibility in selecting among a broad range of subjects that are intended to strengthen or maintain competency in technical, managerial (business), or ethical fields.” Courses must “maintain, improve, or expand the skills and knowledge relevant to (the engineer’s) discipline” Online Courses Internet-based training is accepted provided a graded quiz is required. EZpdh’s online courses meet this criteria PDH Carryover A maximum of 15 PDH may be carried forward into the next renewal period Additional - For dual licensees, the number of PDH units required shall be 18, at least one-third of which shall be obtained in each profession
- PDH completion records must be maintained for a minimum of 3 years. EZpdh.com helps you meet this requirement by providing you with the ability to instantly access and print a certificate upon successful completion of a course. Additionally, your certificates of completion are securely maintained by EZpdh.com for a minimum of seven years and can be accessed online through your login account
Preview Course: Nevada Statutes, Codes, & Ethics
Preview Course: Thermodynamics
Preview Course: Heat Transfer
Preview Course: Fluid Flow
Preview Course: Chillers & Refrigerants
Preview Course: Diesel I & IIClick “Preview Course” to view prior to purchaseClick “Add to Cart” to purchase -