Sale!

Michigan-Land Surveyors Package: 30 PDH

$90.00

Eight Land Surveying courses that will earn 30 PDH guaranteed to be accepted by the Michigan Department of Licensing and Regulatory Affairs.Instructor: Raymond Bosek, PE

Land Surveyor’s Ethics: 2 PDH

This course satisfies the Michigan continuing education requirement of two (2) professional development hours in engineering ethics, (ref. Michigan Administrative Code R339.16040)
In this ethics course the student will understand the standards of professional behavior for adherence to the highest ethical conduct and revisit the emphasis that the holder of a professional license has a direct and vital impact on the safety, health, and welfare of the public.

Public Land Survey Rectangular System: 8 PDH

In this course the student will review the rectangular surveying system which has been used continuously in the United States since 1785. As all facets of this system occasionally come into use, the student will become well versed in the field procedures of conducting an original survey covering both historical and current methods.

Aerial Photogrammetry: 5 PDH

In this course the student will understand procedural guidance, technical specifications, and quality control (QC) criteria for performing aerial photogrammetric mapping activities.

Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors: 4 PDH

This course is an introduction of using sUAS in land surveying. From FAA licensing requirements to common sUAS products and software, with an understanding of these basics a land surveyor can easily get started in using this up and coming technology.

Airborne Topographic LiDAR: 3 PDH

In this course the student will review the principles of Airborne Topographic LiDAR and learn how to utilize methods to employ this technology in the field.

Construction Surveying Curves: 3 PDH

In this course the student will learns to locate points using angles and distances for establishing curves. An essential tool in construction surveying when determining the line of a curve for road layout or some other type of curved construction.

Description of Lands: 3 PDH

This course provides guidance for documenting accurate boundary descriptions and locations by survey in the standards followed for Executive and public land orders and proclamations.

Corner Restoration Fundamentals: 2 PDH

In this course the student will understand the understand federal guidelines of resurveying corner monuments and the procedures and laws to successfully reestablish these boundaries.


Preview Course: Land Surveyor’s Ethics
Preview Course: Public Land Survey: Rectangular System
Preview Course: Aerial Photogrammetry
Preview Course: Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors
Preview Course: Airborne Topographic LiDAR
Preview Course: Construction Surveying Curves
Preview Course: Description of Lands
Preview Course: Corner Restoration Fundamentals
SKU: MILS-24 Categories: , , ,

Related Courses

  • Sale! Civil Engineering Courses

    Arkansas-Civil Engineering Package #2: 30 PDH

     $90.00 Add to cart
    Six Civil Engineering courses plus Arkansas Rules, Regulations & Ethics course that will earn 30 PDH guaranteed to be accepted by the Arkansas State Board of Licensure for Professional Engineers and Professional Land Surveyors. Instructor: Raymond Bosek, PE

    Arkansas – Rules, Regulations, and Ethics for Professional Engineers: 3 PDH

    In this course the student will study the Arkansas State Board of Licensure for Professional Engineers and Professional Surveyor Rules and Regulations including Professional Engineering Ethics.

    Accident and Operational Safety Analysis: 4 PDH

    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.

    Engineering Human Performance Optimization in the Workplace: 4 PDH

    In this course the student will understand the strategic approach for improving performance to reduce human error and manage controls so as to reduce unwanted events and/or mitigate their impact should they occur. The student will learn methods and techniques for catching and reducing errors and locating and eliminating latent organizational weaknesses.

    Gravel Road Construction: 4 PDH

    It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.

    Remote Sensing Essentials: 5 PDH

    In this course the student will understand the theory and practice of remote sensing and image processing. Remote sensing is valuable tool for engineers and surveyors as it provides a cost-effective means of surveying, monitoring, and mapping objects at or near the surface of the Earth.

    Residential Structural Design: 5 PDH

    In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.

    Sustainable Concrete Pavements: 5 PDH

    In this course the student will understand concrete pavement sustainability concepts and recommended practices for maximizing the sustainability of concrete pavements.


    Preview Course: Arkansas Rules, Regulations and Ethics
    Preview Course: Accident and Operational Safety Analysis
    Preview Course: Engineering Human Performance Optimization in the Workplace
    Preview Course: Gravel Road Construction
    Preview Course: Remote Sensing Essentials
    Preview Course: Residential Structural Design
    Preview Course: Sustainable Concrete Pavements
  • Sale!

    Wisconsin-Mechanical Engineering Package: 30 PDH

     $148.50 Add to cart
    This package satisfies all 30 required hours of professional development.

    1. 2 hours professional conduct and ethics, ref. Wisconsin Administrative Code A-E 13.03(1)(b)
    2. 13 hours of live interactive courses, ref. Wisconsin Administrative Code A-E 13.03(1)(c)
    3. 17 hours of distance education courses, ref. Wisconsin Administrative Code A-E 13.03(2)(b)
    Nine live interactive webinars and four distance learning courses guaranteed to be accepted by the Wisconsin Examining Board of Architects, Landscape Architects, Professional Engineers, Designers and Land SurveyorsInstructor: Raymond Bosek, PE
    Package includes the following ten live interactive courses:
    View Webinar Schedule

    Webinar: Design for Construction Safety: 1 PDH

    This course will provide engineers with information on how to recognize and anticipate construction hazards and how to eliminate them with well thought out design features. This course emphasizes permanent design features that eliminate or reduce the risk to hazards.Read More

    Webinar: Ethics for the Practicing Engineer: 1 PDH

    In this introductory ethics course the engineer will understand why we study ethics as engineering professionals, ethical theories to use in our ethical decision making, and some tools to identify and resolve ethical conflicts.Read More

    Webinar: Administering the Construction Project: 2.5 PDH

    In this course we will review the management and administrative procedures that practitioners will need to guide construction projects from the pre-construction phase to project close out successfully. The course will benefit professional engineers serving as project managers or field representatives by presenting techniques that can be applied to the construction project to enhance operations, improve scheduling, mitigate issues, and help minimize and resolve claims or disputes.Read More

    Webinar: Infrastructure Planning: 2 PDH

    This course presents the main concepts of infrastructure planning in the public sector including the environmental, social, and institutional assessments and discusses many planning methodologies and approaches. The purpose of this course is to provide practitioners involved in planning public infrastructure projects with guidelines to be considered and applied in the planning process.Read More

    Webinar: Introduction to Mechanical Components: 1.5 PDH

    Along with pumps and valves, reviewed in separate PDH courses, there are many other components that can be found in an industrial/power generation setting. Knowledge of these systems can be useful to any engineer. This online course provides a brief overview of air compressors, hydraulics, boilers, cooling towers, and other components likely to be installed in an industrial or power generation facility.Read More

    Webinar: Modern Heat Pumps: 1PDH

    In this course the engineer will be introduced to modern heat pumps and their applications. This introductory course will enable the students to understand the basics of the latest heat pump technologies and how to apply to multiple applications.Read More

    Webinar: Diesel Engine Fundamentals: 1.5 PDH

    This course provides the engineer the basic understanding of the operation and design of Diesel Engines. The student will learn in depth, the diesel engine operation including an overview of all basic components as well as the different cycles and the operation of all essential systems of modern day diesel engines.Read More

    Webinar: Storm Shelters & Safe Rooms: 1 PDH

    This course presents engineers with important information about the design and construction of community and residential safe rooms that will provide protection during tornado and hurricane events. The course will center around design guides FEMA P-320, P-361, and ICC 500.Read More

    Webinar: Fasteners: 1.5 PDH

    This course presents an in-depth look at steel fasteners with focus on structural fasteners, since they are a critical part of most steel structures. A broad range of topics will be discussed including fastener strength, selection criteria, available coatings and testing. This course will go beyond the standards and specifications and provide engineers with helpful background information and practical strategies to mitigate fastener issues and keep projects trouble free.Read More

    Package includes the following four distance education courses:

    Ethics for Professional Engineers – Case Reviews: 2 PDH

    In this course the student will study several ethical review cases conducted by the National Society of Professional Engineers (NSPE). This Ethics course is intended to fulfill the state’s ethics requirement.Read MorePreview Course

    Boiler Basics-Operation and Maintenance: 5 PDH

    In this course the student will understand steam generation, boilers and boiler components, and basic concepts in their operation and maintenance.Read MorePreview Course

    Improving Motor and Drive System Performance: 5 PDH

    This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.Read MorePreview Course

    Installation, Maintenance, and Repair of Water and Sewage Systems: 5 PDH

    In this course the student will understand a facility’s water and sewage systems and associated common components as well as basic concepts in installing, maintaining, repairing and the operation and maintenance of these systems.Read MorePreview Course

Scroll to Top