Pavement Design for Roads, Streets, Walks, and Open Storage Areas: 6 PDH
Pavement Design for Roads, Streets, Walks, and Open Storage Areas: 6 PDH

Pavement Design for Roads, Streets, Walks, and Open Storage Areas: 6 PDH

$36.00

This online course provides guidance for design of pavements and supporting materials for roads, streets, walks and open storage areas. The contents include procedures for conducting preliminary site reconnaissance, traffic analyses, and criteria for the design of subgrade, subbase, base courses, flexible and rigid pavements.
Instructor: Raymond Bosek, PE

This online course provides guidance for design of pavements and supporting materials for roads, streets, walks and open storage areas. The contents include procedures for conducting preliminary site reconnaissance, traffic analyses, and criteria for the design of subgrade, subbase, base courses, flexible and rigid pavements.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

  • Preliminary Soil Investigations
  • Vehicular Traffic Considerations
  • Flexible Pavement Materials & Subgrades
  • Bituminous Pavement
  • Flexible Pavement Design
  • Rigid Pavement Design
  • Concrete Pavement Design
  • Reinforced Concrete Pavements
  • Pavement Overlays
  • Joints For Plain & Reinforced Concrete
  • Roller-Compacted Concrete Pavements
  • Seasonal Frost Conditions

    • CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
SKU: CV801-25 Categories: ,

Related Courses

  • Design and Construction of Road Tunnels-Part 2 Methodology and Excavation Support: 5 PDH

     $30.00 Add to cart
    In this course the student will understand the construction methodology and excavation support systems for cut-and-cover road tunnels, design and construction issues for rock and soft ground tunneling, and the special approaches that must be made when passing through difficult ground.
    Instructor: Raymond Bosek, PE
    In this course the student will understand the construction methodology and excavation support systems for cut-and-cover road tunnels, design and construction issues for rock and soft ground tunneling, and the special approaches that must be made when passing through difficult ground.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Cut and cover tunnels
    • Rock Tunneling
    • Softground tunneling
    • Difficult ground tunneling
    • Structural design and subsystems
    • Groundwater control
    • Tunnel support design
    • Permanent lining design
    • Soil stabilization
    • Instability and heaving loads

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Roundabouts Part 3: 5 PDH

     $30.00 Add to cart

    This is part III of a three-part series. The third course covering the final chapters 6, 7, & 8 of Roundabouts: An Informational Guide from the Federal Highway Administration. In this course the student will learn the many different ways to design a roundabout and what steps are taken to ensure the most efficient and safe roundabout for a given location. Also covered are the signage requirements, landscaping potential, and multi-roundabout systems that can be used when designing a roundabout.
    Instructor: Raymond Bosek, PE

    This is part III of a three-part series. The third course covering the final chapters 6, 7, & 8 of Roundabouts: An Informational Guide from the Federal Highway Administration. In this course the student will learn the many different ways to design a roundabout and what steps are taken to ensure the most efficient and safe roundabout for a given location. Also covered are the signage requirements, landscaping potential, and multi-roundabout systems that can be used when designing a roundabout.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Design principles
    • Geometric elements
    • Double-Lane, rural, and mini-roundabouts
    • Traffic design
    • Signage, markings, and illumination
    • Other design considerations
    • Crash prediction models

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) continuing education hour (CEH)/professional development hour (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

Shopping Cart
Scroll to Top