South Dakota-Land Surveyors Package: 30 PDH
Original price was: $180.00.$90.00Current price is: $90.00.
Land Surveyor’s Ethics: 2 PDH
In this ethics course the student will understand the standards of professional behavior for adherence to the highest ethical conduct and revisit the emphasis that the holder of a professional license has a direct and vital impact on the safety, health, and welfare of the public.
Public Land Survey Rectangular System: 8 PDH
In this course the student will review the rectangular surveying system which has been used continuously in the United States since 1785. As all facets of this system occasionally come into use, the student will become well versed in the field procedures of conducting an original survey covering both historical and current methods.
Aerial Photogrammetry: 5 PDH
In this course the student will understand procedural guidance, technical specifications, and quality control (QC) criteria for performing aerial photogrammetric mapping activities.
Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors: 4 PDH
This course is an introduction of using sUAS in land surveying. From FAA licensing requirements to common sUAS products and software, with an understanding of these basics a land surveyor can easily get started in using this up and coming technology.
Airborne Topographic LiDAR: 3 PDH
In this course the student will review the principles of Airborne Topographic LiDAR and learn how to utilize methods to employ this technology in the field.
Construction Surveying Curves: 3 PDH
In this course the student will learns to locate points using angles and distances for establishing curves. An essential tool in construction surveying when determining the line of a curve for road layout or some other type of curved construction.
Description of Lands: 3 PDH
This course provides guidance for documenting accurate boundary descriptions and locations by survey in the standards followed for Executive and public land orders and proclamations.
Corner Restoration Fundamentals: 2 PDH
In this course the student will understand the understand federal guidelines of resurveying corner monuments and the procedures and laws to successfully reestablish these boundaries.
Preview Course: Land Surveyor’s Ethics
Preview Course: Public Land Survey: Rectangular System
Preview Course: Aerial Photogrammetry
Preview Course: Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors
Preview Course: Airborne Topographic LiDAR
Preview Course: Construction Surveying Curves
Preview Course: Description of Lands
Preview Course: Corner Restoration Fundamentals
Related Courses
- Sale!
Florida-Civil Engineering Package #2: 18 PDH
Original price was: $120.00.$80.00Current price is: $80.00. Add to cartFlorida Approved Provider: 0006346Four Civil Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Raymond Bosek, PEFlorida Laws & Rules for Professional Engineers: 1 CEH
- Florida Approved Course #0010038
- Approved Course for February 28, 2027 Renewal Deadline
- This course satisfies the one (1) hour laws and rules requirement
In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.Florida Ethics for Professional Engineers: 1 CEH
- Florida Approved Course #0010039
- Approved Course for February 28, 2027 Renewal Deadline
- This course satisfies the one (1) hour ethics requirement
The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.Accident and Operational Safety Analysis: 4 PDH
In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.
Gravel Road Construction: 4 PDH
It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.
Lessons Learned-Design and Construction of Buildings: 3 PDH
In this course the student will review lessons learned from post building occupancy evaluations to understand common building design and/or construction flaws and review essential tips to correct, avoid and/or mitigate these occurrences.
Residential Structural Design: 5 PDH
In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.
Advanced Fabricated Building: 6 PDH
$36.00 Add to cartIn this course the student will understand the building requirements of manufactured structures, particularly residential homes in Florida, as well as understand the various fabrication materials used for other advanced building projects. Instructor: Raymond Bosek, PESPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Discuss building codes & HUD codes for fabricated structures
- Understand the materials & products of manufactured buildings
- Discuss systems & systems testing of manufactured buildings
- Explain the various fabrication products for advanced construction
- Discuss the benefits and drawbacks of each of these fabrication products
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies six professional development hours (PDH) of continuing education.
Preview CourseClick “Preview Course” to View Prior to PurchaseClick “Add to Cart” to Purchase and Access Quiz
