Virginia-Electrical Engineering Package: 16 PDH
$96.00 $64.00
Virginia – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Virginia State APELSCIDLA Board Laws and Regulations, including Professional Engineering Ethics.
Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH
In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.
Energy Storage Technology Cost and Performance: 4 PDH
In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).
Electrical Storage Guide for Electrical Engineers: 5 PDH
This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.
Related Courses
Florida-Structural Engineering Package w/AFBC: 19 PDH
$140.00$90.00 Add to cartFlorida Approved Provider: 0006346Six Structural Engineering courses plus Florida Laws & Rules, Florida Ethics and Advanced Florida Building Code Course that will earn 19 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional EngineersInstructor: Raymond Bosek, PEPackage contains all required hours for 2023 renewal- Florida Laws & Rules (Course #0010038)
- Florida Ethics (Course #0010038)
- Remaining hours in Area of Practice
Florida Laws & Rules for Professional Engineers: 1 CEH
Preview Course: Florida Laws and Rules
- Florida Approved Course #0010038
- Approved Course for February 28, 2025 Renewal Deadline
- This course satisfies the one (1) hour laws and rules requirement
In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- The engineer's guidelines for practicing within Florida's laws and rules
- Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium
- Florida Statutes: Changes to Chapter 455
- Florida Statutes: Changes to Chapter 471
- Disciplinary Cases Review
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).
Florida Ethics for Professional Engineers: 1 CEH
Preview Course: Florida Ethics
- Florida Approved Course #0010039
- Approved Course for February 28, 2023 Renewal Deadline
- This course satisfies the one (1) hour ethics requirement
The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- The engineer’s duty to protect the public
- The engineer’s duty to make objective and truthful statements
- The engineer’s duty to limit practice to his or her field of competence
- The engineer’s duty to maintain client confidentiality
- The engineer’s responsibility to the profession
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 continuing education hours (CEH).
2023 Florida Advanced Building Code: Building – Significant Changes: 1 CEH
- Florida Building Commission Approved Course #1222
- This course satisfies retention of the “Special Qualifications” designation on your licensure record, pursuant to Section 471.0195, Florida Statutes.
This one (1) hour course covers and highlights some of the significant changes and updates in the 2023 8th Edition Florida Building Code: Building (FBC-B) which was recently updated from the 2020 FBC 7th Edition Florida Building Code: Building.Cost Benefit of ICF: 2 PDH
Florida Approved Area of Practice Course #0009701
This online course is based on a guide that provides cost comparisons of ICF construction to standard residential wood-frame construction, a comprehensive cost analysis of the monthly costs of home ownership for wood-frame and ICF homes, and a detailed discussion regarding many of the structural and energy performance benefits gained through the use of ICFs.The student must take a multiple-choice quiz consisting of ten (10) questions at the end of this course to earn PDH credits.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Become familiar with ICF construction
- Be made aware of the many benefits gained through the use of ICF construction
- Comparative performance and cost comparison of ICF home vs wood frame home
- Structral safety and hazard mitigation
- Energy cost comparison of ICF home
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.
Design of Commercial Buildings to Mitigate Terrorist Attacks: 4 PDH
Florida Approved Area of Practice Course #0009695
This course provides guidance to engineers in methods to mitigate the effects of hazards resulting from terrorist attacks on new buildings. While focusing primarily on explosive attacks and design strategies to mitigate the effects of explosions, the course also addresses design strategies to mitigate the effects of chemical, biological and radiological attacks. In addition to the applicability to the design of new commercial office, retail, multi-family residential, and light-industrial buildings, many of the concepts presented are also applicable to other building types and/or existing buildings.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Design strategies to enhance life safety of building occupants
- Incremental steps to produce fully developed security measures
- Multi-disciplinary approach to security design
- Complex trade-offs required when designing security into a building
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.
Design of Heavy Duty Concrete Floor Slabs on Grade: 3 PDH
Florida Approved Area of Practice Course #0009701
This course describes the criteria for the design of concrete floor slabs on grade in buildings for heavy loads. Concrete floor slabs on grade are often subjected to heavy loads in buildings such as wall loads, stationary live loads and moving loads. The entire design procedure is based on a working stress concept. This course will provide the student with the criteria needed to design concrete floor slabs on grade subjected to heavy loads. Design examples are shown to aid in understanding the course material.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- The steps required to design a heavy duty concrete floor slab
- How to determine floor slab requirements for wall loads, stationary wall loads and moving loads
- How to investigate the subgrade and environmental conditions relevant to the design
- How to determine the modulus of subgrade reaction for various soils
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.
Hurricane Mitigation: Summary Report On Building Performance: 3 PDH
Florida Approved Area of Practice Course #0009701
After major hurricane disasters, the Federal Emergency Management Agency (FEMA) dispatches Building Performance Assessment Teams (BPATs) to evaluate the successes and failures of buildings to withstand the wind and flood forces of these storms. The teams document the results of their evaluations in building performance assessment reports. This 3-hour online course summarizes the BPAT reports for Hurricane Katrina.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Describe the building and foundation types typically used in coastal areas
- Illustrate the ability of various building and foundation types to withstand coastal surge, riverine flood, and hurricane winds
- Explain design and construction practices that can reduce building damage in hurricanes
- Describe construction practices that can reduce building damage in hurricanes
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.
Deterioration of Concrete: 2 PDH
Florida Approved Area of Practice Course #0009701
A basic understanding of the underlying causes of concrete deficiencies is essential to performing meaningful evaluations which lead to the proper selection of the method or technique used to successfully repair concrete. Symptoms or observations of a deficiency must be differentiated from the actual cause of the deficiency, and it is imperative that causes and not symptoms be addressed in repairs. Deterioration of concrete is an extremely complex subject since, in most cases, the damage detected will be the result of more than one mechanism.In this course, the student will review Chapter 3, Causes of Distress and Deterioration of Concrete from Engineer Manual (EM) 1110-2-2002, “Engineering and Design – Evaluation and Repair of Concrete Structures” published by the U.S. Army Corp of Engineers (issued 30 June 1995). This course is most relevant to engineers wishing to attain knowledge on the most common causes of problems in concrete. The course also provides a brief description of the basic mechanism of each common problem, a description of the typical symptoms that would be observed during a visual inspection, and suggests preventative methods or techniques to prevent further damage.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Common causes of concrete deterioration
- Symptoms of concrete distress and deterioration that can be found during visual inspections
- Preventative measures to reduce or eliminate further concrete degradation.
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.
Structural Design Criteria For Structures Other Than Buildings: 2 PDH
Florida Approved Area of Practice Course #0009701
This two hour online course establishes structural design criteria for structures other than buildings, furnishes design guidance for various types of structures, and identifies special considerations with regard to certain materials in specific applications. Structures other than buildings which are covered in this course include the following: bridges; dock and harbor facilities; drainage structures; bulk material structures; water and wastewater structures; and mechanical, electrical, and communication structures. The course materials are based entirely on the Technical Manual TM 5-809-6/AFM 88-3 of Joint Departments of the Army and Air Force USA: Structural Design Criteria for Structures Other Than Buildings.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Know the common building materials used in construction
- Types of structures used in transportation, water & electrical distribution
- Support requirements for mechanical systems and bulk materials
- Design criteria for various types of structures
- Identify special considerations with regard to certain materials in specific applications.
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.
Preview Course: Florida Laws and Rules
Preview Course: Florida Ethics
Preview Course: 2023 Florida Advanced Building Code
Preview Course: Cost Benefit of ICF
Preview Course: Design of Commercial Buildings to Mitigate Terrorist Attacks
Preview Course: Design of Heavy Duty Concrete Floor Slabs on Grade
Preview Course: Hurricane Mitigation
Preview Course: Deterioration of Concrete
Preview Course: Structural Design Other Than BuildingsSelect “Preview Course” to view prior to purchaseSelect “Add to Cart” to purchaseArkansas-Civil Engineering Package #2: 30 PDH
$180.00$90.00 Add to cartSix Civil Engineering courses plus Arkansas Rules, Regulations & Ethics course that will earn 30 PDH guaranteed to be accepted by the Arkansas State Board of Licensure for Professional Engineers and Professional Land Surveyors. Instructor: Raymond Bosek, PEArkansas – Rules, Regulations, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Arkansas State Board of Licensure for Professional Engineers and Professional Surveyor Rules and Regulations including Professional Engineering Ethics.
Accident and Operational Safety Analysis: 4 PDH
In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.
Engineering Human Performance Optimization in the Workplace: 4 PDH
In this course the student will understand the strategic approach for improving performance to reduce human error and manage controls so as to reduce unwanted events and/or mitigate their impact should they occur. The student will learn methods and techniques for catching and reducing errors and locating and eliminating latent organizational weaknesses.
Gravel Road Construction: 4 PDH
It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.
Remote Sensing Essentials: 5 PDH
In this course the student will understand the theory and practice of remote sensing and image processing. Remote sensing is valuable tool for engineers and surveyors as it provides a cost-effective means of surveying, monitoring, and mapping objects at or near the surface of the Earth.
Residential Structural Design: 5 PDH
In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.
Sustainable Concrete Pavements: 5 PDH
In this course the student will understand concrete pavement sustainability concepts and recommended practices for maximizing the sustainability of concrete pavements.
Preview Course: Arkansas Rules, Regulations and Ethics
Preview Course: Accident and Operational Safety Analysis
Preview Course: Engineering Human Performance Optimization in the Workplace
Preview Course: Gravel Road Construction
Preview Course: Remote Sensing Essentials
Preview Course: Residential Structural Design
Preview Course: Sustainable Concrete Pavements