Wastewater Treatment Plants: 1 PDH

Wastewater Treatment Plants: 1 PDH

$6.00

Package plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.
Instructor: Raymond Bosek, PE

Package plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

  • General configuration of extended aeration, sequencing batch reactor, and oxidation ditch package plants
  • Typical applications for extended aeration, sequencing batch reactor, and oxidation ditch package plants
  • Advantages and disadvantages of extended aeration, sequencing batch reactor, and oxidation ditch package plants
  • Design criteria for extended aeration, sequencing batch reactor, and oxidation ditch package plants
  • Typical performance and costs of extended aeration, sequencing batch reactor, and oxidation ditch package plants

    • CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 professional development hours (PDH) of continuing education.

     

Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
SKU: WW201-24 Categories: ,

Related Courses

  • Installation, Maintenance, and Repair of Water and Sewage Systems: 5 PDH

     $30.00 Add to cart
    In this course the student will understand a facility’s water and sewage systems and associated common components as well as basic concepts in installing, maintaining, repairing and the operation and maintenance of these systems.Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Discuss the different types of plumbing fixtures commonly found
      • Explain the operation of common plumbing fixtures
      • Describe the procedures associated with plumbing repairs
      • Explain the procedures for locating pipe leakage
      • Describe installation and repair of common water and sewage components
      • Describe maintenance and repair of common water and sewage components
      • Explain procedures associated with sewer maintenance and repair

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Fundamentals of Metals: 8 PDH

    Fundamentals of Metals: 5 PDH

     $30.00 Add to cart
    The course provides an understanding of the structure and properties of metals, stress mechanisms, failure modes and the characteristics determine their usefulness for a specific application. Often, materials are subject to variable forces (loads). The engineer calculates these forces to establish the service that can be expected and material scientists experiment to determine how materials deform (elongate, compress, and twist) or break as a function of applied load, time, temperature, and other conditions.
    Instructor: Seth Grablow, PE

    The course provides an understanding of the structure and properties of metals, stress mechanisms, failure modes and the characteristics determine their usefulness for a specific application. Often, materials are subject to variable forces (loads). The engineer calculates these forces to establish the service that can be expected and material scientists experiment to determine how materials deform (elongate, compress, and twist) or break as a function of applied load, time, temperature, and other conditions.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Mechanical properties of metals
    • Structure of metals and how those structures are affected by various processes

      • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 5 professional development hours (PDH) of continuing education.

       

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
Scroll to Top