$6 PE Engineering Continuing Education for PDH Online

Analysis of National Charging infrastructure for Electric Vehicles: 3 PDH
$18.00 Add to cart
This courses addresses the fundamental question of how much plug-in electric vehicle (PEV) charging infrastructure is needed in the United States to support both plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs). In this course the student will understand PEV charging infrastructure requirements and analyze a range of plausible scenarios that consider the relationship between the evolution of the PEV fleet and charging infrastructure.Instructor: Juan Pesante, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
Understand residential and non-residential electric vehicle charging requirements
Discuss existing vehicle and infrastructure status
Understand different scenarios of growth
Explain direct current fast charging growth for corridor charging
Discuss overall infrastructure changes required for models and estimates
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).
Preview Course
Click “Preview Course” to view prior to purchase
Click “Add to Cart” to purchase
Approach Roadway Deformations: 4 PDH
$24.00 Add to cart
In this course the student will understand roadway approach embankment design and construction and methods to mitigate deformations typically seen in these structure, including the infamous “bump” encountered at the approach to structure interface.Instructor: Raymond Bosek, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
Explain typical approach roadway deformation problems
Discuss internal and external deformation
Understand computation of immediate and consolidation settlements
Explain deformation design solutions
Understand construction monitoring and quality assurance
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).
Preview Course
Click “Preview Course” to view prior to purchase
Click “Add to Cart” to purchase
Arkansas – Rules, Regulations, and Ethics for Professional Engineers: 3 PDH
$18.00 Add to cart
In this course the student will study the Arkansas State Board of Lisensure for Professional Engineers and Professional Surveyor Rules and Regulations including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.
Instructor: Juan Pesante, PE
In this course the student will study the Arkansas State Board of Licensure for Professional Engineers and Professional Surveyor Rules and Regulations including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
The engineer's guidelines for practicing within Arkansas's rules and regulations
The engineer’s duty to protect the public
The engineer’s duty to make objective and truthful statements
The engineer’s duty to limit practice to his or her field of competence
The engineer’s duty to maintain client confidentiality
The engineer’s responsibility to the profession
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.
Preview Course
Click” Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
Bases and Subbases for Concrete Pavements: 1 PDH
$6.00 Add to cart
In this course the student will understand the best practices for the design and construction of bases and subbases for concrete pavements as well as the effects on performance.
Instructor: Raymond Bosek, PE
In this course the student will understand the concepts and benefits of internal curing for concrete pavements including mixture design, quality control, and studies of practical applications over the past two decades.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
Rigid Pavement Layer Configuration
Design of Base/Subbase For Rigid Pavements
Materials For Base and Subbase
Construction and Subbase
Cost Considerations
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one (1) professional development hour (PDH) of continuing education.
Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
Bases and Subbases for Concrete Pavements: 1 PDH (On-Demand Webinar)
$10.00 Add to cart
In this course the student will understand the best practices for the design and construction of bases and subbases for concrete pavements as well as the effects on performance.Instructor: Raymond Bosek, PE
In this course the student will understand the best practices for the design and construction of bases and subbases for concrete pavements as well as the effects on performance.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
Describe the best practices for design & construction of bases & subbases
Discuss the early use and history of bases & subbases
Understand the pavement layer configuration
Explain design considerations for bases and subbases
Discuss design of bases/subbases layers for rigid pavements
Describe the materials utilized for bases & subbases
Understand the construction of bases/subbases layers
Explain cost considerations
Discuss European practices of design and construction with bases & subbases for rigid pavements
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.
Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).
Upon purchase your will have access to launch the Ondemand Webinar.
The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.
Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
You may print or save your certificate or access anytime within your account.
Basic Electrical and DC Theory: 9 PDH
$50.00 Add to cart
Do you know where electricity comes from? To be able to say yes to that question, you must understand a bit about the physics of matter. In this course you’ll learn the basics involving: matter, electron theory, magnetism, electromagnetism, the laws of electrical circuits, series circuits, parallel circuits, series-parallel circuits and the basic electrical formulas.
Instructor: Juan-Pesante, PE
Do you know where electricity comes from? To be able to say yes to that question, you must understand a bit about the physics of matter. In this course you’ll learn the basics involving: matter, electron theory, magnetism, electromagnetism, the laws of electrical circuits, series circuits, parallel circuits, series-parallel circuits and the basic electrical formulas.
This course also introduces the basic electricity and electrical circuit concepts associated with direct current. Topics include calculation of current, voltage, resistance and power in series, parallel and combination circuits with direct current (DC) power sources.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
How is DC voltage produced and what does an electric circuit consist of
What is a rectifier and how half-wave bridge rectifiers differ from full-wave bridge rectifiers
What is the difference between a schematic diagram, one-line diagram, block diagram and wiring diagram
What is resistivity and how temperature affects the resistance of materials
What is the difference between open circuit, close circuit, and short circuit
What primary characteristics identify a series, parallel or a combination circuit
How to calculate the current and voltage drop in series, parallel or combination circuits
How to calculate the equivalent resistance for a series, parallel or combination circuit
What is meant by the terms voltage divider and current division
How is electron flow theory different from conventional current theory
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 9 professional development hours (PDH) of continuing education.
Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
Batteries, DC Circuits, DC Generators, & DC Motors: 6 PDH
$36.00 Add to cart
This electrical training course provides a basic introduction to DC theory, electrical circuits, batteries and DC machinery (motors and generators). This course is essential to electrical engineers to refresh upon the basics and relearn the basic knowledge of electrical principals and equipment usages and applications.Instructor: Juan Pesante, PE
This electrical training course provides a basic introduction to DC theory, electrical circuits, batteries and DC machinery (motors and generators). This course is essential to electrical engineers to refresh upon the basics and relearn the basic knowledge of electrical principals and equipment usages and applications.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
Battery theory and terminology
Battery operations: series, parallel, primary, seconday, shelf life, etc
Battery types: wet, dry, alkaline, etc
Battery harzards
Inductance
Capacitance
DC generator construction
DC generator theory of operation
DC generator voltage production, ratings, & losses
DC motor theory
DC motor construction and operation
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.
Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
Best Practices for O&M of Photovoltaic and Energy Storage Systems: 5 PDH
$30.00 Add to cart
In this course the student will understand how to reduce the cost and improve the effectiveness of operations and maintenance (O&M) for photovoltaic (PV) systems and combined PV and energy storage systems. The course follows the guide: Best Practices for O&M of Photovoltaic and Energy Storage Systems 3rd edition, published by the National Renewable Energy Laboratory.Instructor: Juan Pesante, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
Understand standards of O&M of Photovoltaic and Energy Storage Systems
Discuss prerequisites for a successful O&M program
Understand dependencies on PV system type, site, and environmental conditions
Explain system performance and O&M plans
Discuss system monitoring and O&M implementation strategies
Discuss estimating PV O&M costs
Understand PV O&M cost survey information and trends
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).
Preview Course
Click “Preview Course” to view prior to purchase
Click “Add to Cart” to purchase
Blockchain Technology Overview: 3 PDH
$18.00 Add to cart
In this course the student will be introduced to Blockchain technology, from its history and beginnings, through the various components, models, and make-up and finally its applications and limitations. Instructor: Juan Pesante, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
Understand the Origins of Blockchains
Identify Blockchain Components and Models
Explain Blockchain Forking and Contracts
Explain Blockchain Smart Contracts
Discuss Blockchain Limitations and Misconceptions
Discuss Blockchain Applications Considerations
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.
Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
Boiler Basics-Operation and Maintenance: 5 PDH
$30.00 Add to cart
In this course the student will understand steam generation, boilers and boiler components, and basic concepts in their operation and maintenance.Instructor: Seth Grablow, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
Explain steam generation theory
Explain boiler design requirements
Discuss the different types of boilers
Describe the different types of boiler fittings and accessories
Identify the automatic controls associated with boilers
Describe the different types of instruments and meters
Explain the procedures associated with boiler water treatment and cleaning
Describe the procedures for cleaning boiler firesides and watersides
Describe the procedures associated with boiler maintenance
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).
Preview Course
Click “Preview Course” to view prior to purchase
Click “Add to Cart” to purchase
Building Envelope Impact on HVAC Energy Use: 3 PDH
$18.00 Add to cart
How airtight are the buildings you are responsible for? What is the energy load and indoor air quality like in your buildings? The only way to know is to perform a study. Despite common assumptions, measurements have shown that typical U.S. commercial buildings are not particularly airtight. In this course we present a recent simulation study on the impact of improving envelope airtightness in U.S. commercial buildings. You get documented, verifiable facts, report charts and graphs illustrating the findings, and a discussion from the report on the results of the study, Investigation of the Impact of Commercial Building Envelope Airtightness on HVAC Energy Use.Instructor: Seth Grablow, PE
How airtight are the buildings you are responsible for? What is the energy load and indoor air quality like in your buildings? The only way to know is to perform a study. Despite common assumptions, measurements have shown that typical U.S. commercial buildings are not particularly airtight.
In this course we present a recent simulation study on the impact of improving envelope airtightness in U.S. commercial buildings. You get documented, verifiable facts, report charts and graphs illustrating the findings, and a discussion from the report on the results of the study, Investigation of the Impact of Commercial Building Envelope Airtightness on HVAC Energy Use.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
Discuss the reasons for performing a study
Understand the method of analysis regarding building envelope tightness
Describe the buildings used for the study
Understand which climates allow for the most HVAC savings
Explain the results of the study
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.
Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
Carbon Absorption of Volatile Organic Compounds: 3 PDH
$18.00 Add to cart
Carbon adsorption is used in air pollution control to remove volatile organic compounds (VOCs) from low to medium concentration gas streams, when stringent outlet concentration must be met and/or recovery of the VOC is desired. This course covers the types of adsorbers, adsorption theory, and design procedures for carbon adsorption equipment.
Instructor: Seth Grablow, PE
Carbon adsorption is used in air pollution control to remove volatile organic compounds (VOCs) from low to medium concentration gas streams, when stringent outlet concentration must be met and/or recovery of the VOC is desired. This course covers the types of adsorbers, adsorption theory, and design procedures for carbon adsorption equipment.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
The types of carbon adsorption equipment and which are in most common use
Define an adsorption isotherm and be able to recognize the equation for the Freundlich isotherm
Adsorber sizing parameters
Make adsorption and desorption time calculations
Procedures for estimating carbon requirements
Cost estimation procedures for carbon adsorption systems
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.
Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
Chemical Deicers & Concrete Pavement: Impacts & Mitigation: 1 PDH
$6.00 Add to cart
In this course the student will understand the distresses caused to concrete by chemical deicers and methods used to minimize this distress.Instructor: Raymond Bosek, PE
In this course the student will understand the distresses caused to concrete by chemical deicers and methods used to minimize this distress.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
Understanding of the use of chemical anti-icers and deicers
Discuss how hydraulic cement paste (HCP) is traditionally protected from freeze-thaw damage
Describe physical and chemical distress mechanisms
Discuss strategies that can be employed to mitigate this distress
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one professional development hour (PDH) of continuing education.
Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
Chillers, Refrigerant Compressors, and Heating Systems: 5 PDH
$30.00 Add to cart
This course focuses on the equipment and equipment components used to generate heating and cooling. It does not include fans and pumps. This distinction is clear for most equipment types, such as unit heaters, boilers, and chillers. However, for packaged air-conditioning (AC) equipment the distinction can be subtle. Most packaged AC equipment is treated as a unit by performance rating procedures. Hence, separation of the fans is difficult. For this study, only the refrigerant compressors of packaged equipment are considered.
Instructor: Seth Grablow, PE
This course focuses on the equipment and equipment components used to generate heating and cooling. It does not include fans and pumps. This distinction is clear for most equipment types, such as unit heaters, boilers, and chillers. However, for packaged air-conditioning (AC) equipment the distinction can be subtle. Most packaged AC equipment is treated as a unit by performance rating procedures. Hence, separation of the fans is difficult. For this study, only the refrigerant compressors of packaged equipment are considered.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
To provide an accurate estimate of the energy used by primary cooling and heating equipment in the US commercial building sector
To provide a physical understanding of the factors, which contribute to energy use by the equipment
To provide a baseline estimate of current national energy use, which can be used for calculation of the national energy savings impact of various options for reducing energy usage
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 5 professional development hours (PDH) of continuing education.
Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
Circuit Protection Devices: 1 PDH
$6.00 Add to cart
In this course the student will learn the basics of circuit protection and the common devices and the attributes of these devices used for protecting circuit integrity. Instructor: Juan Pesante, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
Discuss the reasons for protection (shorts, excessive current, heat)
Explain the functions of fuses and circuit breakers
Understand the different fuse types
Understand the different fuse ratings
Identify fuse designations
Explain how to check and replace fuses safely
Identify the different types of circuit breakers
Understand circuit breaker ratings
Discuss circuit breaker maintenance
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one professional development hour (PDH) of continuing education.
Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
Coating Types and Characteristics of Metals: 3 PDH
$18.00 Add to cart
In this course the student will understand the characteristics and applications of various industrial coatings and metal finishes. Instructor: Seth Grablow, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
Discuss various metal coating types and characteristics
Explain film-forming mechanisms and binders
Understand driers, pigments, solvents, and miscellaneous additives
Explain zinc-rich coatings and VOCs
Understand powder coating, thermal sprays, galvanizing, etc.
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.
Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH
$24.00 Add to cart
In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts. Instructor: Juan Pesante, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
Understand current CAES and PSH technologies and their challenges
Discuss bulk energy storage applications and their requirements
Discuss novel CAES technologies
Discuss novel PSH technologies
Explain the feasibility of these novel technologies
Discuss technological gaps and barriers and further R&D needs
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).
Preview Course
Click “Preview Course” to view prior to purchase
Click “Add to Cart” to purchase
Concepts for Advanced Electrical Knowledge & Practical Troubleshooting: 8 PDH
$40.00 Add to cart
In this course, applicable to all professional engineering backgrounds, the student will understand the concepts of electricity and mechanism and design of electronics. They will understand how electrical components work from theory to design to the operation of common industrial circuits with tips for practical troubleshooting.Instructor: Juan Pesante, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
Discuss the concepts of electricity & electronic theory
Understand electromagnetism and electromotive force
Understand current, voltage, and resistance in circuits
Explain DC & AC circuit analysis
Discuss capacitance and inductance
Understand DC & AC measuring instruments and concepts
Explain circuit analysis and troubleshooting circuits
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies eight professional development hours (PDH) of continuing education.
Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
Concrete Construction: 6 PDH
$36.00 Add to cart
More concrete is used than any other man-made material in the world, about seven billion cubic meters of concrete – more than one cubic meter for every person on Earth.
Concrete is one of the most important construction materials. It is comparatively economical, easy to make, offers continuity and solidity, and will bond with other materials.
In this course the student will understand essentially all aspects of concrete construction including characteristics, mix design, formwork, joints, placement, finishing, and pre-cast. Instructor: Raymond Bosek, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
Define characteristics of concrete
Identify ingredients essential for good concrete
Calculate concrete mix designs
Determine methods and mixing times of concrete
Describe the types of concrete forms and their construction
Determine the types of ties for and placement of reinforcing steel
Determine the location of construction joints
Determine proper occasions for using the concrete saw
Describe the proper procedures for placing concrete
Describe the methods available for consolidating concrete
Describe the finishing process for the final concrete surface
Determine projects suitable for and lifting methods necessary for precast and tilt-up construction
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 21 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies six professional development hours (PDH) of continuing education.
Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz
Conduits, Culverts, and Pipes Part I: 4 PDH
$24.00 Add to cart
Part I of a two-part series. This course provides guidance on the design and construction of conduits, culverts, and pipes, and the design procedures for trench/embankment earth loadings, highway loadings, railroad loadings, surface concentrated loadings, internal/external fluid pressures, cast-in-place conduits for dams, circular reinforced concrete pipe for small dams and levees, and corrugated metal pipe for rural levees and culverts.
Instructor: Raymond Bosek, PE
Part I of a two-part series. This course provides guidance on the design and construction of conduits, culverts, and pipes, and the design procedures for trench/embankment earth loadings, highway loadings, railroad loadings, surface concentrated loadings, internal/external fluid pressures, cast-in-place conduits for dams, circular reinforced concrete pipe for small dams and levees, and corrugated metal pipe for rural levees and culverts.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
Material selection
Installation methods
Loadings
Method of analysis
Joints & camber
Life cycle design
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.
Preview Course
Click “Preview Course” to View Prior to Purchase
Click “Add to Cart” to Purchase and Access Quiz