Shop

  • This online timed course satisfies Ohio R.C. section 4733.151
    In this course the student will understand all elements effecting heating and cooling of structures and to properly calculate loads and loss for ideal thermal comfort.Instructor: Seth, Grablow PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the human body, human heat transfer, and thermal comfort
    • Understand design conditions for heating and cooling
    • Understand heat gain, heat loss, and heat transfer of people and equipment
    • Explain solar heat gain and transfer
    • Discuss infiltration heat load and weatherizing
    • Understand calculating heating and cooling requirements
    • Understand annual energy consumption of a building

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty-five (25) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies seven (7) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Essentials of Heating and Cooling of Buildings (Ohio Timed): 7 PDH

    $42.00 Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    In this course the student will understand all elements effecting heating and cooling of structures and to properly calculate loads and loss for ideal thermal comfort.Instructor: Seth, Grablow PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the human body, human heat transfer, and thermal comfort
    • Understand design conditions for heating and cooling
    • Understand heat gain, heat loss, and heat transfer of people and equipment
    • Explain solar heat gain and transfer
    • Discuss infiltration heat load and weatherizing
    • Understand calculating heating and cooling requirements
    • Understand annual energy consumption of a building

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty-five (25) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies seven (7) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • In this course the student will understand all elements effecting heating and cooling of structures and to properly calculate loads and loss for ideal thermal comfort.Instructor: Seth, Grablow PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    1. Discuss the human body, human heat transfer, and thermal comfort
    2. Understand design conditions for heating and cooling
    3. Understand heat gain, heat loss, and heat transfer of people and equipment
    4. Explain solar heat gain and transfer
    5. Discuss infiltration heat load and weatherizing
    6. Understand calculating heating and cooling requirements
    7. Understand annual energy consumption of a building

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies seven professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Essentials of Heating and Cooling of Buildings: 7 PDH

    $40.00 Add to cart
    In this course the student will understand all elements effecting heating and cooling of structures and to properly calculate loads and loss for ideal thermal comfort.Instructor: Seth, Grablow PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    1. Discuss the human body, human heat transfer, and thermal comfort
    2. Understand design conditions for heating and cooling
    3. Understand heat gain, heat loss, and heat transfer of people and equipment
    4. Explain solar heat gain and transfer
    5. Discuss infiltration heat load and weatherizing
    6. Understand calculating heating and cooling requirements
    7. Understand annual energy consumption of a building

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies seven professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • This timed course satisfies Ohio R.C. section 4733.151
    In this introductory ethics course the engineer will understand why we study ethics as engineering professionals,  ethical theories to use in our ethical decision making, and some tools to identify and resolve ethical conflicts.Instructor: Raymond Bosek, PE
    In this introductory ethics course the engineer will understand why we study ethics as engineering professionals,  ethical theories to use in our ethical decision making, and some tools to identify and resolve ethical conflicts.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Stimulate ethical imagination and thinking
      • Recognize ethical problems
      • Analyze using ethical concepts and principles
      • Deal with disagreement, ambiguity, vagueness

    CERTIFICATE OF COMPLETION

    This one (1) hour timed on-demand webinar satisfies timed and monitored instruction required for Ohio Licensed Professional Engineers. You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies one (1) professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the On-demand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime as well as pause/rewind.

    Upon completion you will then answer a personal accountability statement and a certificate of completion will be immediately generated.
    You may print or save your certificate or access anytime within your account.

    Ethics for the Practicing Engineer: 1PDH (Ohio Timed On-Demand Webinar)

    $10.00 Add to cart
    This timed course satisfies Ohio R.C. section 4733.151
    In this introductory ethics course the engineer will understand why we study ethics as engineering professionals,  ethical theories to use in our ethical decision making, and some tools to identify and resolve ethical conflicts.Instructor: Raymond Bosek, PE
    In this introductory ethics course the engineer will understand why we study ethics as engineering professionals,  ethical theories to use in our ethical decision making, and some tools to identify and resolve ethical conflicts.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Stimulate ethical imagination and thinking
      • Recognize ethical problems
      • Analyze using ethical concepts and principles
      • Deal with disagreement, ambiguity, vagueness

    CERTIFICATE OF COMPLETION

    This one (1) hour timed on-demand webinar satisfies timed and monitored instruction required for Ohio Licensed Professional Engineers. You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies one (1) professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the On-demand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime as well as pause/rewind.

    Upon completion you will then answer a personal accountability statement and a certificate of completion will be immediately generated.
    You may print or save your certificate or access anytime within your account.

  • In this introductory ethics course the engineer will understand why we study ethics as engineering professionals,  ethical theories to use in our ethical decision making, and some tools to identify and resolve ethical conflicts.
    Instructor: Raymond Bosek, PE
    In this introductory ethics course the engineer will understand why we study ethics as engineering professionals,  ethical theories to use in our ethical decision making, and some tools to identify and resolve ethical conflicts.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Stimulate ethical imagination and thinking
      • Recognize ethical problems
      • Analyze using ethical concepts and principles
      • Deal with disagreement, ambiguity, vagueness

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies one (1) professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the On-demand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
    You may print or save your certificate or access anytime within your account.

    Ethics for the Practicing Engineer: 1PDH (On-Demand Webinar)

    $10.00 Add to cart
    In this introductory ethics course the engineer will understand why we study ethics as engineering professionals,  ethical theories to use in our ethical decision making, and some tools to identify and resolve ethical conflicts.
    Instructor: Raymond Bosek, PE
    In this introductory ethics course the engineer will understand why we study ethics as engineering professionals,  ethical theories to use in our ethical decision making, and some tools to identify and resolve ethical conflicts.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Stimulate ethical imagination and thinking
      • Recognize ethical problems
      • Analyze using ethical concepts and principles
      • Deal with disagreement, ambiguity, vagueness

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies one (1) professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the On-demand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
    You may print or save your certificate or access anytime within your account.

  • This course provides an introduction to exterior electrical power distribution systems for buildings and related infrastructure. The information provided here can be utilized by electrical engineers in the development of the plans, specifications, and calculations, and can serve as the minimum electrical design requirements. It is applicable to the traditional electrical services customary for Design-Bid-Build construction contracts and for Design-Build construction contracts. Project conditions may dictate the need for a design that exceeds these minimum requirements. The design criteria and standards contained within are the minimum requirements acceptable for installations for efficiency, economy, durability, maintainability, and reliability of electrical power supply and distribution systems. The criteria and standards herein are not intended to be retroactively mandatory.Instructor: Juan Pesante, PE

    This course provides an introduction to exterior electrical power distribution systems for buildings and related infrastructure. The information provided here can be utilized by electrical engineers in the development of the plans, specifications, and calculations, and can serve as the minimum electrical design requirements. It is applicable to the traditional electrical services customary for Design-Bid-Build construction contracts and for Design-Build construction contracts. Project conditions may dictate the need for a design that exceeds these minimum requirements. The design criteria and standards contained within are the minimum requirements acceptable for installations for efficiency, economy, durability, maintainability, and reliability of electrical power supply and distribution systems. The criteria and standards herein are not intended to be retroactively mandatory. After completing this course you will have gained knowledge of circuitry and electrical equipment found to power buildings and how to design an exterior electrical distribution systems for buildings.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    1. Learn guidelines for selection of primary voltage
    2. Learn about main electric supply station
    3. Learn how design utilization electric supply stations differ from main electric supply stations
    4. Learn about primary unit substations to distribute underground medium voltage circuits
    5. Learn design criteria for secondary unit substations
    6. Learn guidelines for design and installation of pad-mounted transformers
    7. Learn about medium voltage switchgear
    8. Learn about application of pad-mounted sectionalizing termination cabinets
    9. Learn application and limitation guidelines for power factor correction or to minimize line losses
    10. Learn “best practices” for exterior electric power distribution
    11. Learn criteria for overhead power distribution lines
    12. Learn about the advantages and disadvantages of copper versus aluminum conductors for exterior electrical power distribution
    13. Learn when and where to apply surge arrestors
    14. Learn the fundamentals of fuse protection
    15. Learn about underground electrical distribution systems.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Exterior Electrical Power Distribution: 4 PDH

    $24.00 Add to cart
    This course provides an introduction to exterior electrical power distribution systems for buildings and related infrastructure. The information provided here can be utilized by electrical engineers in the development of the plans, specifications, and calculations, and can serve as the minimum electrical design requirements. It is applicable to the traditional electrical services customary for Design-Bid-Build construction contracts and for Design-Build construction contracts. Project conditions may dictate the need for a design that exceeds these minimum requirements. The design criteria and standards contained within are the minimum requirements acceptable for installations for efficiency, economy, durability, maintainability, and reliability of electrical power supply and distribution systems. The criteria and standards herein are not intended to be retroactively mandatory.Instructor: Juan Pesante, PE

    This course provides an introduction to exterior electrical power distribution systems for buildings and related infrastructure. The information provided here can be utilized by electrical engineers in the development of the plans, specifications, and calculations, and can serve as the minimum electrical design requirements. It is applicable to the traditional electrical services customary for Design-Bid-Build construction contracts and for Design-Build construction contracts. Project conditions may dictate the need for a design that exceeds these minimum requirements. The design criteria and standards contained within are the minimum requirements acceptable for installations for efficiency, economy, durability, maintainability, and reliability of electrical power supply and distribution systems. The criteria and standards herein are not intended to be retroactively mandatory. After completing this course you will have gained knowledge of circuitry and electrical equipment found to power buildings and how to design an exterior electrical distribution systems for buildings.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    1. Learn guidelines for selection of primary voltage
    2. Learn about main electric supply station
    3. Learn how design utilization electric supply stations differ from main electric supply stations
    4. Learn about primary unit substations to distribute underground medium voltage circuits
    5. Learn design criteria for secondary unit substations
    6. Learn guidelines for design and installation of pad-mounted transformers
    7. Learn about medium voltage switchgear
    8. Learn about application of pad-mounted sectionalizing termination cabinets
    9. Learn application and limitation guidelines for power factor correction or to minimize line losses
    10. Learn “best practices” for exterior electric power distribution
    11. Learn criteria for overhead power distribution lines
    12. Learn about the advantages and disadvantages of copper versus aluminum conductors for exterior electrical power distribution
    13. Learn when and where to apply surge arrestors
    14. Learn the fundamentals of fuse protection
    15. Learn about underground electrical distribution systems.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • This timed course satisfies Ohio R.C. section 4733.151
    This course presents an in-depth look at steel fasteners. A broad range of topics will be discussed including fastener strength, thread design , applications, properties and tensioning methods. This course will go beyond the standards and specifications and provide engineers with a thorough understanding of fasteners and fastener design and applications as well as helpful background information.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain the basics of bolting
      • Gain an understanding of the materials and properties of steel fasteners
      • Become familiar with fastener construction & coatings
      • Understand fastener design criteria and applications
      • Discuss practical tensioning methods

    CERTIFICATE OF COMPLETION

    This one and one-half (1.5) hour timed on-demand webinar satisfies timed and monitored instruction required for Ohio Licensed Professional Engineers. You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies one and one-half (1.5) professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the On-demand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime as well as pause/rewind.

    Upon completion you will then answer a personal accountability statement and a certificate of completion will be immediately generated.
    You may print or save your certificate or access anytime within your account.

    Fasteners 1.5 PDH (Ohio Timed On-Demand Webinar)

    $15.00 Add to cart
    This timed course satisfies Ohio R.C. section 4733.151
    This course presents an in-depth look at steel fasteners. A broad range of topics will be discussed including fastener strength, thread design , applications, properties and tensioning methods. This course will go beyond the standards and specifications and provide engineers with a thorough understanding of fasteners and fastener design and applications as well as helpful background information.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain the basics of bolting
      • Gain an understanding of the materials and properties of steel fasteners
      • Become familiar with fastener construction & coatings
      • Understand fastener design criteria and applications
      • Discuss practical tensioning methods

    CERTIFICATE OF COMPLETION

    This one and one-half (1.5) hour timed on-demand webinar satisfies timed and monitored instruction required for Ohio Licensed Professional Engineers. You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies one and one-half (1.5) professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the On-demand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime as well as pause/rewind.

    Upon completion you will then answer a personal accountability statement and a certificate of completion will be immediately generated.
    You may print or save your certificate or access anytime within your account.

  • This course presents an in-depth look at steel fasteners. A broad range of topics will be discussed including fastener strength, thread design , applications, properties and tensioning methods. This course will go beyond the standards and specifications and provide engineers with a thorough understanding of fasteners and fastener design and applications as well as helpful background information.
    Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain the basics of bolting
      • Gain an understanding of the materials and properties of steel fasteners
      • Become familiar with fastener construction & coatings
      • Understand fastener design criteria and applications
      • Discuss practical tensioning methods

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1.5 professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the On-demand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
    You may print or save your certificate or access anytime within your account.

    Fasteners 1.5 PDH (On-Demand Webinar)

    $15.00 Add to cart
    This course presents an in-depth look at steel fasteners. A broad range of topics will be discussed including fastener strength, thread design , applications, properties and tensioning methods. This course will go beyond the standards and specifications and provide engineers with a thorough understanding of fasteners and fastener design and applications as well as helpful background information.
    Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain the basics of bolting
      • Gain an understanding of the materials and properties of steel fasteners
      • Become familiar with fastener construction & coatings
      • Understand fastener design criteria and applications
      • Discuss practical tensioning methods

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1.5 professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the On-demand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
    You may print or save your certificate or access anytime within your account.

  • This three (3) hour course overviews standards to design and build an environment for building occupants that is reasonably safe from fire and products of combustion as well as how to provide a reasonable level of building usability and property protection from the effects of fire and products of combustion.
    Instructor: Seth Grablow, PE

    This three (3) hour course overviews standards to design and build an environment for building occupants that is reasonably safe from fire and products of combustion as well as how to provide a reasonable level of building usability and property protection from the effects of fire and products of combustion.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Become familiar and identify fire protection engineering design criteria
    • Discuss the various building fire protection devices and installation standards
    • Examine adequacy for water supply and the various methods and standards to implement sprinkler systems
    • Understand fire extinguishing systems – the how, what, and where to install
    • Identify fire alarm system design guidlines and installation standards

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) continuing education hour (CEH)/professional development hour (PDH) of continuing education.

    Preview Course
    Click” Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Fire Protection System Design: 3 PDH

    $18.00 Add to cart
    This three (3) hour course overviews standards to design and build an environment for building occupants that is reasonably safe from fire and products of combustion as well as how to provide a reasonable level of building usability and property protection from the effects of fire and products of combustion.
    Instructor: Seth Grablow, PE

    This three (3) hour course overviews standards to design and build an environment for building occupants that is reasonably safe from fire and products of combustion as well as how to provide a reasonable level of building usability and property protection from the effects of fire and products of combustion.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Become familiar and identify fire protection engineering design criteria
    • Discuss the various building fire protection devices and installation standards
    • Examine adequacy for water supply and the various methods and standards to implement sprinkler systems
    • Understand fire extinguishing systems – the how, what, and where to install
    • Identify fire alarm system design guidlines and installation standards

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) continuing education hour (CEH)/professional development hour (PDH) of continuing education.

    Preview Course
    Click” Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Florida Approved Course #0010038
    -Approved Course for February 28, 2019 Renewal Deadline
    -This course satisfies the one (1) hour laws and rules requirement
    In this course the student will study the Florida Board of Professional Engineers Laws and Rules. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapters 455 and 471, 3) Case Law Concerning Chapters 455 and 471, and 4) Disciplinary Cases Review. *Approved Course for February 28, 2019 renewal deadline.* Instructor: Raymond Bosek, PE

    In this course the student will study the Florida Board of Professional  Engineers Laws and Rules, including Professional Engineering Ethics. This  course consists of four sections, 1) Florida Rules: Rules adopted, amended,  or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapters 455 and 471, 3) Case Law Concerning Chapters 455 and 471, and 4) Disciplinary Cases Review.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Florida's laws and rules
    • Florida Rules: Rules adopted, amended,  or repealed during the immediate preceding biennium
    • Florida Statutes:  Changes to Chapters 455 and 471
    • Case Law Concerning Chapters 455  and 471
    • Disciplinary Cases Review

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Florida 2019 Renewal – Laws & Rules for Professional Engineers: 1 CEH

    $12.00 Add to cart
    Florida Approved Course #0010038
    -Approved Course for February 28, 2019 Renewal Deadline
    -This course satisfies the one (1) hour laws and rules requirement
    In this course the student will study the Florida Board of Professional Engineers Laws and Rules. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapters 455 and 471, 3) Case Law Concerning Chapters 455 and 471, and 4) Disciplinary Cases Review. *Approved Course for February 28, 2019 renewal deadline.* Instructor: Raymond Bosek, PE

    In this course the student will study the Florida Board of Professional  Engineers Laws and Rules, including Professional Engineering Ethics. This  course consists of four sections, 1) Florida Rules: Rules adopted, amended,  or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapters 455 and 471, 3) Case Law Concerning Chapters 455 and 471, and 4) Disciplinary Cases Review.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Florida's laws and rules
    • Florida Rules: Rules adopted, amended,  or repealed during the immediate preceding biennium
    • Florida Statutes:  Changes to Chapters 455 and 471
    • Case Law Concerning Chapters 455  and 471
    • Disciplinary Cases Review

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Florida Approved Course #0010039
    -Approved Course for February 28, 2025 Renewal Deadline
    -This course satisfies the one (1) hour ethics requirement
    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies. *Approved Florida Ethics Course for February 28, 2025 renewal deadline.*Instructor: Seth Grablow, PE

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Florida Ethics for Professional Engineers: 1 CEH

    $12.00 Add to cart
    Florida Approved Course #0010039
    -Approved Course for February 28, 2025 Renewal Deadline
    -This course satisfies the one (1) hour ethics requirement
    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies. *Approved Florida Ethics Course for February 28, 2025 renewal deadline.*Instructor: Seth Grablow, PE

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Florida Approved Course #0010038
    -Approved Course for February 28, 2025 Renewal Deadline
    -This course satisfies the one (1) hour laws and rules requirement
    In this course the student will study the Florida Board of Professional Engineers Laws and Rules. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review. *Approved Course for February 28, 2025 renewal deadline.* Instructor: Raymond Bosek, PE

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.
    .

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Florida's laws and rules
    • Florida Rules: Rules adopted, amended,  or repealed during the immediate preceding biennium
    • Florida Statutes:  Changes to Chapter 455
    • Florida Statutes:  Changes to Chapter 471
    • Disciplinary Cases Review

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Florida Laws & Rules for Professional Engineers: 1 CEH

    $12.00 Add to cart
    Florida Approved Course #0010038
    -Approved Course for February 28, 2025 Renewal Deadline
    -This course satisfies the one (1) hour laws and rules requirement
    In this course the student will study the Florida Board of Professional Engineers Laws and Rules. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review. *Approved Course for February 28, 2025 renewal deadline.* Instructor: Raymond Bosek, PE

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.
    .

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Florida's laws and rules
    • Florida Rules: Rules adopted, amended,  or repealed during the immediate preceding biennium
    • Florida Statutes:  Changes to Chapter 455
    • Florida Statutes:  Changes to Chapter 471
    • Disciplinary Cases Review

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Sale!
    Florida Approved Provider: 0006346
    Five Chemical Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 PDH guaranteed to be accepted by the Florida Board of Professional EngineersInstructor: Raymond Bosek, PE
    Package contains all required hours for 2023 renewal

    • Florida Laws & Rules (Course #0010038)
    • Florida Ethics (Course #0010038)
    • Remaining hours in Area of Practice

    Florida Laws & Rules for Professional Engineers: 1 CEH

    Preview Course: Florida Laws and Rules

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Florida's laws and rules
    • Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium
    • Florida Statutes: Changes to Chapter 455
    • Florida Statutes: Changes to Chapter 471
    • Disciplinary Cases Review

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

    Florida Ethics for Professional Engineers: 1 CEH

    Preview Course: Florida Ethics

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 continuing education hours (CEH).

    Process Design for Conversion of Biomass to Biofuels: 4 PDH

    Florida Approved Area of Practice Course

    In this course you the student will understand the motivation, process, design, and cost of converting biomass into biofuel. The focus of this course is to find a plausible pathway to convert algal carbohydrates and lipids to fuel and to minimize cost during production.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Why the motivation to exploit this energy supply
      • Process design and cost estimation
      • Economics and processing cost factors
      • Analysis of processing research on case study
      • Future research and opportunities

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 4 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Engineer’s Guide to Cross Connection Control: 4 PDH

    Florida Approved Area of Practice Course

    In this online course a student will understand cross connection risks, review real case studies of cross connection mishaps, and understand the various methods and procedures to mitigate cross connection hazards.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the reasons for performing a study
    • Understand the health hazards of cross-connections
    • Discuss various real-life mishaps
    • Discuss cross-connections risk mitigation
    • Explain programs for cross-connection control and backflow prevention
    • Understand common cross-connection scenarios and methods to mitigate

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Carbon Absorption of Volatile Organic Compounds: 3 PDH

    Florida Approved Area of Practice Course

    Carbon adsorption is used in air pollution control to remove volatile organic compounds (VOCs) from low to medium concentration gas streams, when stringent outlet concentration must be met and/or recovery of the VOC is desired. This course covers the types of adsorbers, adsorption theory, and design procedures for carbon adsorption equipment.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • The types of carbon adsorption equipment and which are in most common use
      • Define an adsorption isotherm and be able to recognize the equation for the Freundlich isotherm
      • Adsorber sizing parameters
      • Make adsorption and desorption time calculations
      • Procedures for estimating carbon requirements
      • Cost estimation procedures for carbon adsorption systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Corrosion Protection for Metal Fasteners in Coastal Areas: 3 PDH

    Florida Approved Area of Practice Course

    In this online course a student will understand material design and selection of metal fasteners and connectors on structures in coastal areas for increased corrosion-resistance.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the importance of using corrosion-resistant metal connectors and fasteners in coastal areas
    • Discuss regulations and codes in corrosion resistance material selection for fasteners
    • Explain the causes of corrosion in coastal areas
    • Understand types of corrosion-resistant metal connectors and fasteners
    • Explain best practices for corrosion resistance

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Hazardous Waste Identification: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This course covers hazardous waste regulated by the EPA under the Resource Conservation and Recovery Act (RCRA), starting with determining whether what waste is considered a solid waste according to the RCRA regulations and moving on to determining if it fits one of the RCRA requirements for being a hazardous waste.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Fundamentals of the hazardous waste identification process
      • Definition of hazardous waste & solid waste as used by RCRA
      • How to identify listed hazardous wastes and their characteristics
      • Interpretation of the mixture and ‘derived-from’ rules
      • Interpretation of the contained-in policy

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 16 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Florida-Chemical Engineering Package: 18 CEH

    $80.00 Add to cart
    Florida Approved Provider: 0006346
    Five Chemical Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 PDH guaranteed to be accepted by the Florida Board of Professional EngineersInstructor: Raymond Bosek, PE
    Package contains all required hours for 2023 renewal

    • Florida Laws & Rules (Course #0010038)
    • Florida Ethics (Course #0010038)
    • Remaining hours in Area of Practice

    Florida Laws & Rules for Professional Engineers: 1 CEH

    Preview Course: Florida Laws and Rules

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Florida's laws and rules
    • Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium
    • Florida Statutes: Changes to Chapter 455
    • Florida Statutes: Changes to Chapter 471
    • Disciplinary Cases Review

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

    Florida Ethics for Professional Engineers: 1 CEH

    Preview Course: Florida Ethics

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 continuing education hours (CEH).

    Process Design for Conversion of Biomass to Biofuels: 4 PDH

    Florida Approved Area of Practice Course

    In this course you the student will understand the motivation, process, design, and cost of converting biomass into biofuel. The focus of this course is to find a plausible pathway to convert algal carbohydrates and lipids to fuel and to minimize cost during production.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Why the motivation to exploit this energy supply
      • Process design and cost estimation
      • Economics and processing cost factors
      • Analysis of processing research on case study
      • Future research and opportunities

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 4 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Engineer’s Guide to Cross Connection Control: 4 PDH

    Florida Approved Area of Practice Course

    In this online course a student will understand cross connection risks, review real case studies of cross connection mishaps, and understand the various methods and procedures to mitigate cross connection hazards.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the reasons for performing a study
    • Understand the health hazards of cross-connections
    • Discuss various real-life mishaps
    • Discuss cross-connections risk mitigation
    • Explain programs for cross-connection control and backflow prevention
    • Understand common cross-connection scenarios and methods to mitigate

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Carbon Absorption of Volatile Organic Compounds: 3 PDH

    Florida Approved Area of Practice Course

    Carbon adsorption is used in air pollution control to remove volatile organic compounds (VOCs) from low to medium concentration gas streams, when stringent outlet concentration must be met and/or recovery of the VOC is desired. This course covers the types of adsorbers, adsorption theory, and design procedures for carbon adsorption equipment.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • The types of carbon adsorption equipment and which are in most common use
      • Define an adsorption isotherm and be able to recognize the equation for the Freundlich isotherm
      • Adsorber sizing parameters
      • Make adsorption and desorption time calculations
      • Procedures for estimating carbon requirements
      • Cost estimation procedures for carbon adsorption systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Corrosion Protection for Metal Fasteners in Coastal Areas: 3 PDH

    Florida Approved Area of Practice Course

    In this online course a student will understand material design and selection of metal fasteners and connectors on structures in coastal areas for increased corrosion-resistance.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the importance of using corrosion-resistant metal connectors and fasteners in coastal areas
    • Discuss regulations and codes in corrosion resistance material selection for fasteners
    • Explain the causes of corrosion in coastal areas
    • Understand types of corrosion-resistant metal connectors and fasteners
    • Explain best practices for corrosion resistance

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Hazardous Waste Identification: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This course covers hazardous waste regulated by the EPA under the Resource Conservation and Recovery Act (RCRA), starting with determining whether what waste is considered a solid waste according to the RCRA regulations and moving on to determining if it fits one of the RCRA requirements for being a hazardous waste.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Fundamentals of the hazardous waste identification process
      • Definition of hazardous waste & solid waste as used by RCRA
      • How to identify listed hazardous wastes and their characteristics
      • Interpretation of the mixture and ‘derived-from’ rules
      • Interpretation of the contained-in policy

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 16 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

  • Sale! Environmental engineering
    Florida Approved Provider: 0006346
    Seven Environmental Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 PDH guaranteed to be accepted by the Florida Board of Professional EngineersInstructor: Raymond Bosek, PE
    Package contains all required hours for 2023 renewal

    • Florida Laws & Rules (Course #0010038)
    • Florida Ethics (Course #0010038)
    • Remaining hours in Area of Practice

    Florida Laws & Rules for Professional Engineers: 1 CEH

    Preview Course: Florida Laws and Rules

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Florida's laws and rules
    • Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium
    • Florida Statutes: Changes to Chapter 455
    • Florida Statutes: Changes to Chapter 471
    • Disciplinary Cases Review

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

    Florida Ethics for Professional Engineers: 1 CEH

    Preview Course: Florida Ethics

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 continuing education hours (CEH).

    Building Envelope Impact on HVAC Energy Use: 3 PDH

    Florida Approved Area of Practice Course #0009701

    How airtight are the buildings you are responsible for? What is the energy load and indoor air quality like in your buildings? The only way to know is to perform a study. Despite common assumptions, measurements have shown that typical U.S. commercial buildings are not particularly airtight.

    In this course we present a recent simulation study on the impact of improving envelope airtightness in U.S. commercial buildings. You get documented, verifiable facts, report charts and graphs illustrating the findings, and a discussion from the report on the results of the study, Investigation of the Impact of Commercial Building Envelope Airtightness on HVAC Energy Use.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the reasons for performing a study
    • Understand the method of analysis regarding building envelope tightness
    • Describe the buildings used for the study
    • Understand which climates allow for the most HVAC savings
    • Explain the results of the study

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

    Carbon Absorption of Volatile Organic Compounds: 3 PDH

    Florida Approved Area of Practice Course #0009701

    Carbon adsorption is used in air pollution control to remove volatile organic compounds (VOCs) from low to medium concentration gas streams, when stringent outlet concentration must be met and/or recovery of the VOC is desired. This course covers the types of adsorbers, adsorption theory, and design procedures for carbon adsorption equipment.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • The types of carbon adsorption equipment and which are in most common use
      • Define an adsorption isotherm and be able to recognize the equation for the Freundlich isotherm
      • Adsorber sizing parameters
      • Make adsorption and desorption time calculations
      • Procedures for estimating carbon requirements
      • Cost estimation procedures for carbon adsorption systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Hurricane Mitigation: Summary Report On Building Performance: 3 PDH

    Florida Approved Area of Practice Course #0009701

    After major hurricane disasters, the Federal Emergency Management Agency (FEMA) dispatches Building Performance Assessment Teams (BPATs) to evaluate the successes and failures of buildings to withstand the wind and flood forces of these storms. The teams document the results of their evaluations in building performance assessment reports. This 3-hour online course summarizes the BPAT reports for Hurricane Katerina.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Describe the building and foundation types typically used in coastal areas
    • Illustrate the ability of various building and foundation types to withstand coastal surge, riverine flood, and hurricane winds
    • Explain design and construction practices that can reduce building damage in hurricanes
    • Describe construction practices that can reduce building damage in hurricanes

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Energy Performance of LEED for New Construction Buildings: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This focuses on the measured energy performance for 121 LEED New Construction buildings, and compares the data to a variety of benchmarks, including Commercial Building Energy Consumption Survey (CBECS) averages, Energy Star ratings and modeled energy performance estimates provided with LEED submittals.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Recognize how energy performance of the sample set of buildings was evaluated
      • Understand energy savings of LEED certified buildings
      • Discern the accuracy of energy models
      • Discern the accuracy of building specific energy models
      • Interpret the strength and weeknesses of using LEED

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Ponds- Planning, Design, Construction: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This course provides guidance on some of the required criteria the United States Department of Agriculture (USDA) has in place for the planning, design, construction and maintenance of ponds. This course describes basic design principles of embankment and excavation ponds as well as construction requirements. Topics include: water needs, preliminary soil investigations, watershed & stormwater runoff estimation, basin sealing, spillways and inlets, and operation & maintenance. This online PDH course is intended for hydrologists, civil engineers, agricultural engineers, construction engineers, municipal engineers, geotechnical engineers and environmental engineers.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Become familiar with the general features and the differences of embankment and excavated ponds
      • How to perform a preliminary investigation
      • Be able estimate storm water runoff quantity and rate using the runoff curve number method
      • Estimate time of concentration for a watershed for a given flow length and average watershed slope
      • Advantages and disadvantages of a hooded or canopy inlet spillway and a drop inlet spillway
      • Estimate earthfill requirements for an embankment for known end areas and embankment length
      • Estimate embankment end area for known embankment height, side slopes, and top width

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 16 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Hazardous Waste Identification: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This course covers hazardous waste regulated by the EPA under the Resource Conservation and Recovery Act (RCRA), starting with determining whether what waste is considered a solid waste according to the RCRA regulations and moving on to determining if it fits one of the RCRA requirements for being a hazardous waste.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Fundamentals of the hazardous waste identification process
      • Definition of hazardous waste & solid waste as used by RCRA
      • How to identify listed hazardous wastes and their characteristics
      • Interpretation of the mixture and ‘derived-from’ rules
      • Interpretation of the contained-in policy

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 16 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Wastewater Treatment Plants: 1 PDH

    Florida Approved Area of Practice Course #0009700

    Package plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • General configuration of extended aeration, sequencing batch reactor, and oxidation ditch package plants
      • Typical applications for extended aeration, sequencing batch reactor, and oxidation ditch package plants
      • Advantages and disadvantages of extended aeration, sequencing batch reactor, and oxidation ditch package plants
      • Design criteria for extended aeration, sequencing batch reactor, and oxidation ditch package plants
      • Typical performance and costs of extended aeration, sequencing batch reactor, and oxidation ditch package plants

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one professional development hours (PDH) of continuing education.

    Florida-Environmental Engineering Package: 18 CEH

    $80.00 Add to cart
    Florida Approved Provider: 0006346
    Seven Environmental Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 PDH guaranteed to be accepted by the Florida Board of Professional EngineersInstructor: Raymond Bosek, PE
    Package contains all required hours for 2023 renewal

    • Florida Laws & Rules (Course #0010038)
    • Florida Ethics (Course #0010038)
    • Remaining hours in Area of Practice

    Florida Laws & Rules for Professional Engineers: 1 CEH

    Preview Course: Florida Laws and Rules

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Florida's laws and rules
    • Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium
    • Florida Statutes: Changes to Chapter 455
    • Florida Statutes: Changes to Chapter 471
    • Disciplinary Cases Review

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

    Florida Ethics for Professional Engineers: 1 CEH

    Preview Course: Florida Ethics

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 continuing education hours (CEH).

    Building Envelope Impact on HVAC Energy Use: 3 PDH

    Florida Approved Area of Practice Course #0009701

    How airtight are the buildings you are responsible for? What is the energy load and indoor air quality like in your buildings? The only way to know is to perform a study. Despite common assumptions, measurements have shown that typical U.S. commercial buildings are not particularly airtight.

    In this course we present a recent simulation study on the impact of improving envelope airtightness in U.S. commercial buildings. You get documented, verifiable facts, report charts and graphs illustrating the findings, and a discussion from the report on the results of the study, Investigation of the Impact of Commercial Building Envelope Airtightness on HVAC Energy Use.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the reasons for performing a study
    • Understand the method of analysis regarding building envelope tightness
    • Describe the buildings used for the study
    • Understand which climates allow for the most HVAC savings
    • Explain the results of the study

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

    Carbon Absorption of Volatile Organic Compounds: 3 PDH

    Florida Approved Area of Practice Course #0009701

    Carbon adsorption is used in air pollution control to remove volatile organic compounds (VOCs) from low to medium concentration gas streams, when stringent outlet concentration must be met and/or recovery of the VOC is desired. This course covers the types of adsorbers, adsorption theory, and design procedures for carbon adsorption equipment.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • The types of carbon adsorption equipment and which are in most common use
      • Define an adsorption isotherm and be able to recognize the equation for the Freundlich isotherm
      • Adsorber sizing parameters
      • Make adsorption and desorption time calculations
      • Procedures for estimating carbon requirements
      • Cost estimation procedures for carbon adsorption systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Hurricane Mitigation: Summary Report On Building Performance: 3 PDH

    Florida Approved Area of Practice Course #0009701

    After major hurricane disasters, the Federal Emergency Management Agency (FEMA) dispatches Building Performance Assessment Teams (BPATs) to evaluate the successes and failures of buildings to withstand the wind and flood forces of these storms. The teams document the results of their evaluations in building performance assessment reports. This 3-hour online course summarizes the BPAT reports for Hurricane Katerina.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Describe the building and foundation types typically used in coastal areas
    • Illustrate the ability of various building and foundation types to withstand coastal surge, riverine flood, and hurricane winds
    • Explain design and construction practices that can reduce building damage in hurricanes
    • Describe construction practices that can reduce building damage in hurricanes

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Energy Performance of LEED for New Construction Buildings: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This focuses on the measured energy performance for 121 LEED New Construction buildings, and compares the data to a variety of benchmarks, including Commercial Building Energy Consumption Survey (CBECS) averages, Energy Star ratings and modeled energy performance estimates provided with LEED submittals.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Recognize how energy performance of the sample set of buildings was evaluated
      • Understand energy savings of LEED certified buildings
      • Discern the accuracy of energy models
      • Discern the accuracy of building specific energy models
      • Interpret the strength and weeknesses of using LEED

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Ponds- Planning, Design, Construction: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This course provides guidance on some of the required criteria the United States Department of Agriculture (USDA) has in place for the planning, design, construction and maintenance of ponds. This course describes basic design principles of embankment and excavation ponds as well as construction requirements. Topics include: water needs, preliminary soil investigations, watershed & stormwater runoff estimation, basin sealing, spillways and inlets, and operation & maintenance. This online PDH course is intended for hydrologists, civil engineers, agricultural engineers, construction engineers, municipal engineers, geotechnical engineers and environmental engineers.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Become familiar with the general features and the differences of embankment and excavated ponds
      • How to perform a preliminary investigation
      • Be able estimate storm water runoff quantity and rate using the runoff curve number method
      • Estimate time of concentration for a watershed for a given flow length and average watershed slope
      • Advantages and disadvantages of a hooded or canopy inlet spillway and a drop inlet spillway
      • Estimate earthfill requirements for an embankment for known end areas and embankment length
      • Estimate embankment end area for known embankment height, side slopes, and top width

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 16 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Hazardous Waste Identification: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This course covers hazardous waste regulated by the EPA under the Resource Conservation and Recovery Act (RCRA), starting with determining whether what waste is considered a solid waste according to the RCRA regulations and moving on to determining if it fits one of the RCRA requirements for being a hazardous waste.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Fundamentals of the hazardous waste identification process
      • Definition of hazardous waste & solid waste as used by RCRA
      • How to identify listed hazardous wastes and their characteristics
      • Interpretation of the mixture and ‘derived-from’ rules
      • Interpretation of the contained-in policy

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 16 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Wastewater Treatment Plants: 1 PDH

    Florida Approved Area of Practice Course #0009700

    Package plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • General configuration of extended aeration, sequencing batch reactor, and oxidation ditch package plants
      • Typical applications for extended aeration, sequencing batch reactor, and oxidation ditch package plants
      • Advantages and disadvantages of extended aeration, sequencing batch reactor, and oxidation ditch package plants
      • Design criteria for extended aeration, sequencing batch reactor, and oxidation ditch package plants
      • Typical performance and costs of extended aeration, sequencing batch reactor, and oxidation ditch package plants

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one professional development hours (PDH) of continuing education.

  • Sale!
    Florida Approved Provider: 0006346
    Six Structural Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 CEH guaranteed to be accepted by the Florida Board of Professional EngineersInstructor: Raymond Bosek, PE
    Package contains all required hours for 2023 renewal

    • Florida Laws & Rules (Course #0010038)
    • Florida Ethics (Course #0010038)
    • Remaining hours in Area of Practice

    Florida Laws & Rules for Professional Engineers: 1 CEH

    Preview Course: Florida Laws and Rules

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Florida's laws and rules
    • Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium
    • Florida Statutes: Changes to Chapter 455
    • Florida Statutes: Changes to Chapter 471
    • Disciplinary Cases Review

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

    Florida Ethics for Professional Engineers: 1 CEH

    Preview Course: Florida Ethics

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2023 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 continuing education hours (CEH).

    Cost Benefit of ICF: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This online course is based on a guide that provides cost comparisons of ICF construction to standard residential wood-frame construction, a comprehensive cost analysis of the monthly costs of home ownership for wood-frame and ICF homes, and a detailed discussion regarding many of the structural and energy performance benefits gained through the use of ICFs.

    The student must take a multiple-choice quiz consisting of ten (10) questions at the end of this course to earn PDH credits.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Become familiar with ICF construction
      • Be made aware of the many benefits gained through the use of ICF construction
      • Comparative performance and cost comparison of ICF home vs wood frame home
      • Structral safety and hazard mitigation
      • Energy cost comparison of ICF home

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Design of Commercial Buildings to Mitigate Terrorist Attacks: 4 PDH

    Florida Approved Area of Practice Course #0009695

    This course provides guidance to engineers in methods to mitigate the effects of hazards resulting from terrorist attacks on new buildings. While focusing primarily on explosive attacks and design strategies to mitigate the effects of explosions, the course also addresses design strategies to mitigate the effects of chemical, biological and radiological attacks. In addition to the applicability to the design of new commercial office, retail, multi-family residential, and light-industrial buildings, many of the concepts presented are also applicable to other building types and/or existing buildings.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Design strategies to enhance life safety of building occupants
    • Incremental steps to produce fully developed security measures
    • Multi-disciplinary approach to security design
    • Complex trade-offs required when designing security into a building

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Design of Heavy Duty Concrete Floor Slabs on Grade: 3 PDH

    Florida Approved Area of Practice Course #0009701

    This course describes the criteria for the design of concrete floor slabs on grade in buildings for heavy loads. Concrete floor slabs on grade are often subjected to heavy loads in buildings such as wall loads, stationary live loads and moving loads. The entire design procedure is based on a working stress concept. This course will provide the student with the criteria needed to design concrete floor slabs on grade subjected to heavy loads. Design examples are shown to aid in understanding the course material.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The steps required to design a heavy duty concrete floor slab
    • How to determine floor slab requirements for wall loads, stationary wall loads and moving loads
    • How to investigate the subgrade and environmental conditions relevant to the design
    • How to determine the modulus of subgrade reaction for various soils

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Hurricane Mitigation: Summary Report On Building Performance: 3 PDH

    Florida Approved Area of Practice Course #0009701

    After major hurricane disasters, the Federal Emergency Management Agency (FEMA) dispatches Building Performance Assessment Teams (BPATs) to evaluate the successes and failures of buildings to withstand the wind and flood forces of these storms. The teams document the results of their evaluations in building performance assessment reports. This 3-hour online course summarizes the BPAT reports for Hurricane Katrina.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Describe the building and foundation types typically used in coastal areas
      • Illustrate the ability of various building and foundation types to withstand coastal surge, riverine flood, and hurricane winds
      • Explain design and construction practices that can reduce building damage in hurricanes
      • Describe construction practices that can reduce building damage in hurricanes

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Deterioration of Concrete: 2 PDH

    Florida Approved Area of Practice Course #0009701

    A basic understanding of the underlying causes of concrete deficiencies is essential to performing meaningful evaluations which lead to the proper selection of the method or technique used to successfully repair concrete. Symptoms or observations of a deficiency must be differentiated from the actual cause of the deficiency, and it is imperative that causes and not symptoms be addressed in repairs. Deterioration of concrete is an extremely complex subject since, in most cases, the damage detected will be the result of more than one mechanism.

    In this course, the student will review Chapter 3, Causes of Distress and Deterioration of Concrete from Engineer Manual (EM) 1110-2-2002, “Engineering and Design – Evaluation and Repair of Concrete Structures” published by the U.S. Army Corp of Engineers (issued 30 June 1995). This course is most relevant to engineers wishing to attain knowledge on the most common causes of problems in concrete. The course also provides a brief description of the basic mechanism of each common problem, a description of the typical symptoms that would be observed during a visual inspection, and suggests preventative methods or techniques to prevent further damage.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Common causes of concrete deterioration
    • Symptoms of concrete distress and deterioration that can be found during visual inspections
    • Preventative measures to reduce or eliminate further concrete degradation.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Structural Design Criteria For Structures Other Than Buildings: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This two hour online course establishes structural design criteria for structures other than buildings, furnishes design guidance for various types of structures, and identifies special considerations with regard to certain materials in specific applications. Structures other than buildings which are covered in this course include the following: bridges; dock and harbor facilities; drainage structures; bulk material structures; water and wastewater structures; and mechanical, electrical, and communication structures. The course materials are based entirely on the Technical Manual TM 5-809-6/AFM 88-3 of Joint Departments of the Army and Air Force USA: Structural Design Criteria for Structures Other Than Buildings.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Know the common building materials used in construction
    • Types of structures used in transportation, water & electrical distribution
    • Support requirements for mechanical systems and bulk materials
    • Design criteria for various types of structures
    • Identify special considerations with regard to certain materials in specific applications.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Florida-Structural Engineering Package: 18 CEH

    $80.00 Add to cart
    Florida Approved Provider: 0006346
    Six Structural Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 CEH guaranteed to be accepted by the Florida Board of Professional EngineersInstructor: Raymond Bosek, PE
    Package contains all required hours for 2023 renewal

    • Florida Laws & Rules (Course #0010038)
    • Florida Ethics (Course #0010038)
    • Remaining hours in Area of Practice

    Florida Laws & Rules for Professional Engineers: 1 CEH

    Preview Course: Florida Laws and Rules

    • Florida Approved Course #0010038
    • Approved Course for February 28, 2025 Renewal Deadline
    • This course satisfies the one (1) hour laws and rules requirement

    In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Florida's laws and rules
    • Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium
    • Florida Statutes: Changes to Chapter 455
    • Florida Statutes: Changes to Chapter 471
    • Disciplinary Cases Review

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

    Florida Ethics for Professional Engineers: 1 CEH

    Preview Course: Florida Ethics

    • Florida Approved Course #0010039
    • Approved Course for February 28, 2023 Renewal Deadline
    • This course satisfies the one (1) hour ethics requirement

    The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 continuing education hours (CEH).

    Cost Benefit of ICF: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This online course is based on a guide that provides cost comparisons of ICF construction to standard residential wood-frame construction, a comprehensive cost analysis of the monthly costs of home ownership for wood-frame and ICF homes, and a detailed discussion regarding many of the structural and energy performance benefits gained through the use of ICFs.

    The student must take a multiple-choice quiz consisting of ten (10) questions at the end of this course to earn PDH credits.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Become familiar with ICF construction
      • Be made aware of the many benefits gained through the use of ICF construction
      • Comparative performance and cost comparison of ICF home vs wood frame home
      • Structral safety and hazard mitigation
      • Energy cost comparison of ICF home

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Design of Commercial Buildings to Mitigate Terrorist Attacks: 4 PDH

    Florida Approved Area of Practice Course #0009695

    This course provides guidance to engineers in methods to mitigate the effects of hazards resulting from terrorist attacks on new buildings. While focusing primarily on explosive attacks and design strategies to mitigate the effects of explosions, the course also addresses design strategies to mitigate the effects of chemical, biological and radiological attacks. In addition to the applicability to the design of new commercial office, retail, multi-family residential, and light-industrial buildings, many of the concepts presented are also applicable to other building types and/or existing buildings.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Design strategies to enhance life safety of building occupants
    • Incremental steps to produce fully developed security measures
    • Multi-disciplinary approach to security design
    • Complex trade-offs required when designing security into a building

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Design of Heavy Duty Concrete Floor Slabs on Grade: 3 PDH

    Florida Approved Area of Practice Course #0009701

    This course describes the criteria for the design of concrete floor slabs on grade in buildings for heavy loads. Concrete floor slabs on grade are often subjected to heavy loads in buildings such as wall loads, stationary live loads and moving loads. The entire design procedure is based on a working stress concept. This course will provide the student with the criteria needed to design concrete floor slabs on grade subjected to heavy loads. Design examples are shown to aid in understanding the course material.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The steps required to design a heavy duty concrete floor slab
    • How to determine floor slab requirements for wall loads, stationary wall loads and moving loads
    • How to investigate the subgrade and environmental conditions relevant to the design
    • How to determine the modulus of subgrade reaction for various soils

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Hurricane Mitigation: Summary Report On Building Performance: 3 PDH

    Florida Approved Area of Practice Course #0009701

    After major hurricane disasters, the Federal Emergency Management Agency (FEMA) dispatches Building Performance Assessment Teams (BPATs) to evaluate the successes and failures of buildings to withstand the wind and flood forces of these storms. The teams document the results of their evaluations in building performance assessment reports. This 3-hour online course summarizes the BPAT reports for Hurricane Katrina.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Describe the building and foundation types typically used in coastal areas
      • Illustrate the ability of various building and foundation types to withstand coastal surge, riverine flood, and hurricane winds
      • Explain design and construction practices that can reduce building damage in hurricanes
      • Describe construction practices that can reduce building damage in hurricanes

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Deterioration of Concrete: 2 PDH

    Florida Approved Area of Practice Course #0009701

    A basic understanding of the underlying causes of concrete deficiencies is essential to performing meaningful evaluations which lead to the proper selection of the method or technique used to successfully repair concrete. Symptoms or observations of a deficiency must be differentiated from the actual cause of the deficiency, and it is imperative that causes and not symptoms be addressed in repairs. Deterioration of concrete is an extremely complex subject since, in most cases, the damage detected will be the result of more than one mechanism.

    In this course, the student will review Chapter 3, Causes of Distress and Deterioration of Concrete from Engineer Manual (EM) 1110-2-2002, “Engineering and Design – Evaluation and Repair of Concrete Structures” published by the U.S. Army Corp of Engineers (issued 30 June 1995). This course is most relevant to engineers wishing to attain knowledge on the most common causes of problems in concrete. The course also provides a brief description of the basic mechanism of each common problem, a description of the typical symptoms that would be observed during a visual inspection, and suggests preventative methods or techniques to prevent further damage.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Common causes of concrete deterioration
    • Symptoms of concrete distress and deterioration that can be found during visual inspections
    • Preventative measures to reduce or eliminate further concrete degradation.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Structural Design Criteria For Structures Other Than Buildings: 2 PDH

    Florida Approved Area of Practice Course #0009701

    This two hour online course establishes structural design criteria for structures other than buildings, furnishes design guidance for various types of structures, and identifies special considerations with regard to certain materials in specific applications. Structures other than buildings which are covered in this course include the following: bridges; dock and harbor facilities; drainage structures; bulk material structures; water and wastewater structures; and mechanical, electrical, and communication structures. The course materials are based entirely on the Technical Manual TM 5-809-6/AFM 88-3 of Joint Departments of the Army and Air Force USA: Structural Design Criteria for Structures Other Than Buildings.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Know the common building materials used in construction
    • Types of structures used in transportation, water & electrical distribution
    • Support requirements for mechanical systems and bulk materials
    • Design criteria for various types of structures
    • Identify special considerations with regard to certain materials in specific applications.

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

  • Fluid Flow: 4 PDH
    This online timed course satisfies Ohio R.C. section 4733.151
    Fluid flow and practical fluid mechanics is essential to any engineer's knowledge base. This course will overview the basic principles of fluid flow including the three key attributes to solve all fluid problems. Bernoulli Equation will be discussed in detail to enable understanding of different types of energy in a fluid stream. Laminar and turbulent flow, head loss, and factors affecting head loss will also be dicussed in detail and explained with practical problems.Instructor: Seth Grablow, PE

    Fluid flow and practical fluid mechanics is essential to any engineer's knowledge base. This course will overview the basic principles of fluid flow including the three key attributes to solve all fluid problems. Bernoulli Equation will be discussed in detail to enable understanding of different types of energy in a fluid stream. Laminar and turbulent flow, head loss, and factors affecting head loss will also be dicussed in detail and explained with practical problems.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Review of key principles
      • Shear Stress in a fluid
      • Conservation of Mass
      • Conservation of Momentum
      • Reynolds number
      • Laminar versus turbulent flow
      • Bernoulli Equation
      • Major head losses
      • Minor head losses
      • System level analysis

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase

    Fluid Flow (Ohio Timed): 4 PDH

    $24.00 Add to cart
    This online timed course satisfies Ohio R.C. section 4733.151
    Fluid flow and practical fluid mechanics is essential to any engineer's knowledge base. This course will overview the basic principles of fluid flow including the three key attributes to solve all fluid problems. Bernoulli Equation will be discussed in detail to enable understanding of different types of energy in a fluid stream. Laminar and turbulent flow, head loss, and factors affecting head loss will also be dicussed in detail and explained with practical problems.Instructor: Seth Grablow, PE

    Fluid flow and practical fluid mechanics is essential to any engineer's knowledge base. This course will overview the basic principles of fluid flow including the three key attributes to solve all fluid problems. Bernoulli Equation will be discussed in detail to enable understanding of different types of energy in a fluid stream. Laminar and turbulent flow, head loss, and factors affecting head loss will also be dicussed in detail and explained with practical problems.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Review of key principles
      • Shear Stress in a fluid
      • Conservation of Mass
      • Conservation of Momentum
      • Reynolds number
      • Laminar versus turbulent flow
      • Bernoulli Equation
      • Major head losses
      • Minor head losses
      • System level analysis

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a fifteen (15) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase
  • Fluid Flow: 4 PDH
    Fluid flow and practical fluid mechanics is essential to any engineer's knowledge base. This course will overview the basic principles of fluid flow including the three key attributes to solve all fluid problems. Bernoulli Equation will be discussed in detail to enable understanding of different types of energy in a fluid stream. Laminar and turbulent flow, head loss, and factors affecting head loss will also be dicussed in detail and explained with practical problems.Instructor: Seth Grablow, PE

    Fluid flow and practical fluid mechanics is essential to any engineer's knowledge base. This course will overview the basic principles of fluid flow including the three key attributes to solve all fluid problems. Bernoulli Equation will be discussed in detail to enable understanding of different types of energy in a fluid stream. Laminar and turbulent flow, head loss, and factors affecting head loss will also be dicussed in detail and explained with practical problems.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Review of key principles
    • Shear Stress in a fluid
    • Conservation of Mass
    • Conservation of Momentum
    • Reynolds number
    • Laminar versus turbulent flow
    • Bernoulli Equation
    • Major head losses
    • Minor head losses
    • System level analysis
    • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Fluid Flow: 4 PDH

    $24.00 Add to cart
    Fluid flow and practical fluid mechanics is essential to any engineer's knowledge base. This course will overview the basic principles of fluid flow including the three key attributes to solve all fluid problems. Bernoulli Equation will be discussed in detail to enable understanding of different types of energy in a fluid stream. Laminar and turbulent flow, head loss, and factors affecting head loss will also be dicussed in detail and explained with practical problems.Instructor: Seth Grablow, PE

    Fluid flow and practical fluid mechanics is essential to any engineer's knowledge base. This course will overview the basic principles of fluid flow including the three key attributes to solve all fluid problems. Bernoulli Equation will be discussed in detail to enable understanding of different types of energy in a fluid stream. Laminar and turbulent flow, head loss, and factors affecting head loss will also be dicussed in detail and explained with practical problems.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Review of key principles
    • Shear Stress in a fluid
    • Conservation of Mass
    • Conservation of Momentum
    • Reynolds number
    • Laminar versus turbulent flow
    • Bernoulli Equation
    • Major head losses
    • Minor head losses
    • System level analysis
    • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Foundations in Expansive Soils: 6 PDH
    This course presents guidance and information for the geotechnical investigation necessary for the selection and design of foundations for heavy and light buildings constructed in expansive clay soil areas. The information in this course is generally applicable to many types of structures such as residences, warehouses, and multi-story buildings. Emphasis is given to the maintenance of an environment that encourages constant moisture conditions in the foundation soils during and following construction. Special attention must always be given to specific requirements of the structure such as limitations on allowable differential movement.
    Instructor: Raymond Bosek, PE

    This course presents guidance and information for the geotechnical investigation necessary for the selection and design of foundations for heavy and light buildings constructed in expansive clay soil areas. The information in this course is generally applicable to many types of structures such as residences, warehouses, and multi-story buildings. Emphasis is given to the maintenance of an environment that encourages constant moisture conditions in the foundation soils during and following construction. Special attention must always be given to specific requirements of the structure such as limitations on allowable differential movement.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Guidelines of the geotechnical investigation and analysis
    • Field exploration
    • Laboratory investigations
    • Methodology for prediction of volume changes
    • Selection of the type of foundation
    • Structural details of design procedures provided for reference
    • Methods of minimizing foundation movement
    • Construction techniques and inspection
      Remedial repair of damaged structures
    • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Foundations in Expansive Soils: 6 PDH

    $36.00 Add to cart
    This course presents guidance and information for the geotechnical investigation necessary for the selection and design of foundations for heavy and light buildings constructed in expansive clay soil areas. The information in this course is generally applicable to many types of structures such as residences, warehouses, and multi-story buildings. Emphasis is given to the maintenance of an environment that encourages constant moisture conditions in the foundation soils during and following construction. Special attention must always be given to specific requirements of the structure such as limitations on allowable differential movement.
    Instructor: Raymond Bosek, PE

    This course presents guidance and information for the geotechnical investigation necessary for the selection and design of foundations for heavy and light buildings constructed in expansive clay soil areas. The information in this course is generally applicable to many types of structures such as residences, warehouses, and multi-story buildings. Emphasis is given to the maintenance of an environment that encourages constant moisture conditions in the foundation soils during and following construction. Special attention must always be given to specific requirements of the structure such as limitations on allowable differential movement.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Guidelines of the geotechnical investigation and analysis
    • Field exploration
    • Laboratory investigations
    • Methodology for prediction of volume changes
    • Selection of the type of foundation
    • Structural details of design procedures provided for reference
    • Methods of minimizing foundation movement
    • Construction techniques and inspection
      Remedial repair of damaged structures
    • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • In this online course a student will understand biodiesel and biodiesel blends and practical guidelines for using in place of standard diesel, this includes characteristics, storage and safety issues, and procedures for using in compression-ignition engines and boilers.
    Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand biodiesel and biodiesel blends
    • Explain biodiesel benefits and attributes
    • Discuss biodiesel blends and characteristics
    • Explain safety, health, & environmental issues with biodiesel
    • Understand storage and material compatibility

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) continuing education hours (CEH)/professional development hours (PDH) of continuing education.

    Preview Course
    Click” Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Fundamentals of Biodiesel: 4 PDH

    $24.00 Add to cart
    In this online course a student will understand biodiesel and biodiesel blends and practical guidelines for using in place of standard diesel, this includes characteristics, storage and safety issues, and procedures for using in compression-ignition engines and boilers.
    Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand biodiesel and biodiesel blends
    • Explain biodiesel benefits and attributes
    • Discuss biodiesel blends and characteristics
    • Explain safety, health, & environmental issues with biodiesel
    • Understand storage and material compatibility

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) continuing education hours (CEH)/professional development hours (PDH) of continuing education.

    Preview Course
    Click” Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • This online course is an introduction to concepts and theories of fiber optics and associated technologies. In this course you will learn about the history of fiber optics, its advantages & disadvantages, and the concepts of fiber optics including: the theory of light transmission through fiber optics, the structure of fiber optics, and properties of transmission.Instructor: Juan Pesante, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand the history of fiber optics
    • Discuss basic fiber optics systems
    • Understand the nature of light propagation and the electromagnetic theory of light
    • Explain the properties of light reflection, refraction, diffusion, and absorption
    • Explain the basic optical fiber material properties and how optical fibers transmit light
    • Explain the ray and mode theories of light propagation along an optical fiber
    • Discuss the processes of light attenuation and dispersion
    • Understand the structure and components of fiber optic systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Fundamentals of Fiber Optics: 3 PDH

    $18.00 Add to cart
    This online course is an introduction to concepts and theories of fiber optics and associated technologies. In this course you will learn about the history of fiber optics, its advantages & disadvantages, and the concepts of fiber optics including: the theory of light transmission through fiber optics, the structure of fiber optics, and properties of transmission.Instructor: Juan Pesante, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand the history of fiber optics
    • Discuss basic fiber optics systems
    • Understand the nature of light propagation and the electromagnetic theory of light
    • Explain the properties of light reflection, refraction, diffusion, and absorption
    • Explain the basic optical fiber material properties and how optical fibers transmit light
    • Explain the ray and mode theories of light propagation along an optical fiber
    • Discuss the processes of light attenuation and dispersion
    • Understand the structure and components of fiber optic systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • This course provides an overview of the development of gas turbines, operational theory, Brayton cycle, conditions and design limitations that affect performance, types of turbine engines and components utilized in a gas turbine engine.Instructor: Seth Grablow, PE

    Concepts for machines that harness power from heated air or water have been around since the 1600s. From this beginning, the gas turbine engine now is at the center of major industries including: aviation, naval propulsion, and power generation. This course provides an overview of the development of gas turbines, operational theory, Brayton cycle, conditions and design limitations that affect performance, types of turbine engines and components utilized in a gas turbine engine.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • History of development of the gas turbine
    • Basic gas turbine engine operation theory, Brayton Cycle
    • Factor affecting engine performance
    • Types of gas turbine engines
    • Components of a gas turbine engine
    • Gas turbine engine auxiliary systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 5 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Fundamentals of Gas Turbine Engines: 5 PDH

    $30.00 Add to cart
    This course provides an overview of the development of gas turbines, operational theory, Brayton cycle, conditions and design limitations that affect performance, types of turbine engines and components utilized in a gas turbine engine.Instructor: Seth Grablow, PE

    Concepts for machines that harness power from heated air or water have been around since the 1600s. From this beginning, the gas turbine engine now is at the center of major industries including: aviation, naval propulsion, and power generation. This course provides an overview of the development of gas turbines, operational theory, Brayton cycle, conditions and design limitations that affect performance, types of turbine engines and components utilized in a gas turbine engine.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • History of development of the gas turbine
    • Basic gas turbine engine operation theory, Brayton Cycle
    • Factor affecting engine performance
    • Types of gas turbine engines
    • Components of a gas turbine engine
    • Gas turbine engine auxiliary systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 5 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

State Approvals

All of our online courses comply with the Continuing Professional Competency Guidelines published by the National Council of Examiners for Engineering and Surveying (NCEES) and the International Association for Continuing Education & Training (IACEP), therefore, shall be acceptable to all the state boards requiring mandatory continuing education.
EZ-pdh.com approved provider map of USA for professional engineersKey
Approved Providers Mandatory

This column lists states which require continuing education (CE) be completed with a state approved provider. We are approved in all of the seven states requiring pre-approval. “Click to Verify” button will transfer you to the State Board website listing approved providers. We are listed under Ezekiel Enterprises, LLC or EZpdh.com with POC: Raymond Bosek

Florida:
Approved Provider Number:0006346
(listed as Ezekiel Enterprises, LLC)Click to VerifyArchitecture and Interior Design Approved Provider Number:PVD433(listed as Ezekiel Enterprises, LLC)
Click to Verify
Indiana:
CE Approved Provider CE21800049(listed as Ezekiel Enterprises, LLC)
Click to Verify
Louisiana:
CPD Approved Provider CPD.0000317(listed as Ezekiel Enterprises, LLC)
Click to VerifyMaryland:
Approved Provider(listed as EZpdh.com)
Click to VerifyNew Jersey:
Approved CPC Provider 24GP00009900(listed as EZpdh.com)
Click to VerifyNew York:
NYSED Approved Sponsor #166(listed as Ezekiel Enterprises, LLC)
Click to VerifyNorth Carolina:
Approved Sponsor Number:S-0650(listed as Ezekiel Enterprises, LLC)
Click to Verify

Not Mandatory

This column lists states which DO NOT require continuing education (CE) to be completed with a state approved provider. States transfer responsibility to engineer to determine if the CE is acceptable and the state reserves the right to disallow hours if they determined hours are unacceptable. We recommend to complete CE with only state pre-approved providers

Alabama
Alaska
Arkansas
Delaware
Georgia
Idaho
Illinois
Iowa
Kansas
Kentucky
Maine
Maryland
Michigan
Minnesota
Mississippi
Missouri
Montana
Nebraska
Nevada
New Hampshire
New Mexico
North Dakota
Ohio
Oklahoma
Oregon
Pennsylvania
South Carolina
South Dakota
Tennessee
Texas
Utah
Vermont
Virginia
West Virginia
Wisconsin
Wyoming

Read More about State ApprovalsAre you a Land Surveyor? – Click Here for State Approvals

Scroll to Top