Sale!

Ohio-Land Surveyors’s Package: 30 PDH

$90.00

This course package satisfies Ohio R.C. section 4733.151(1) 27 hrs (seven courses) of the 30 hrs are timed & tracked, remaining 3 hours (one course) is a correspondence course. (2) 2 hrs of required ethics & laws
Seven Land Surveying courses plus Ohio Laws, Rules, & Ethics course that will earn 30 PDH guaranteed to be accepted by the Ohio State Board of Registration for Professional Engineers & Surveyors Instructor: Raymond Bosek, PE

Course Package consists of:

    • Ohio – Laws, Rules, and Ethics (Ohio Timed): 3 PDH
    • Public Land Survey: Rectangular System (Ohio Timed): 7 PDH
    • Introduction to Small Unmanned Aircraft Systems (sUAS) for Land Surveyors (Ohio Timed): 5 PDH
    • Aerial Photogrammetry (Ohio Timed): 5 PDH
    • Construction Surveying Curves (Ohio Timed): 3 PDH
    • Airborne Topographic LiDAR (Ohio Timed): 2 PDH
    • Corner Restoration Fundamentals (Ohio Timed): 2 PDH
    • Description of Lands: 3 PDH (Online Correspondence)

Preview Course: Ohio Laws, Rules and Ethics
Preview Course: Public Land Survey
Preview Course: Introduction to sUAS
Preview Course: Aerial Photogrammetry
Preview Course: Construction Surveying Curves
Preview Course: Airborne Topographic LiDAR
Preview Course: Corner Restoration Fundamentals
Preview Course: Description of LandsClick “Preview Course” to view prior to purchaseClick “Add to Cart” to purchase
Ohio Timed courses require an active internet connection with the student logged in
Each courses is broken down into multiple timed lessons. Number of lessons and time vary, reference lesson length.
Upon entering a lesson, a timer will start and will auto-complete the lesson when the specified time has passed. Each lesson must be completed in one sitting; however, the auto-complete feature ensures all progress is saved, timed and tracked. Lessons vary from 5 up to 55 minutes and courses may have from 4 to 15 lessons, reference Preview Course.
The final lesson is the course quiz, passing with a 70% or greater will complete the course and generate a certificate of completion. The quiz can be taken multiple times until passing, to help you pass the quiz, it is open book with access to the entire course while completing the quiz.
SKU: OHLS-24 Categories: , ,

Related Courses

  • Sale!

    Illinois-Structural Engineering Package: 30 PDH

     $180.00 Add to cart
    This package satisfies all required hours of professional development.

    1. 20 hours of live interactive courses, ref. §1480.185 b.3.
    2. 10 hours of self-administered distance education courses, ref. §1480.185 b.4.
    3. 1 hour of Sexual Harassment Prevention Training, ref. 20 ILCS 2105/2105-15.5.
    Fifteen live interactive webinars and four self administered distance learning courses including Sexual Harassment Prevention Training guaranteed to be accepted by the State Board of Structural Engineers of the Illinois Department of Financial and Professional RegulationInstructor: Raymond Bosek, PE
    Package includes the following 15 live interactive courses:
    View Webinar Schedule

    Webinar: Design for Construction Safety: 1 PDH

    This course will provide engineers with information on how to recognize and anticipate construction hazards and how to eliminate them with well thought out design features. This course emphasizes permanent design features that eliminate or reduce the risk to hazards.Read More

    Webinar: Ethics for the Practicing Engineer: 1 PDH

    In this introductory ethics course the engineer will understand why we study ethics as engineering professionals, ethical theories to use in our ethical decision making, and some tools to identify and resolve ethical conflicts.Read More

    Webinar: Administering the Construction Project: 2.5 PDH

    In this course we will review the management and administrative procedures that practitioners will need to guide construction projects from the pre-construction phase to project close out successfully. The course will benefit professional engineers serving as project managers or field representatives by presenting techniques that can be applied to the construction project to enhance operations, improve scheduling, mitigate issues, and help minimize and resolve claims or disputes.Read More

    Webinar: Infrastructure Planning: 2 PDH

    This course presents the main concepts of infrastructure planning in the public sector including the environmental, social, and institutional assessments and discusses many planning methodologies and approaches. The purpose of this course is to provide practitioners involved in planning public infrastructure projects with guidelines to be considered and applied in the planning process.Read More

    Webinar: Storm Shelters & Safe Rooms: 1 PDH

    This course presents engineers with important information about the design and construction of community and residential safe rooms that will provide protection during tornado and hurricane events. The course will center around design guides FEMA P-320, P-361, and ICC 500.Read More

    Webinar: Bases and Subbases for Concrete Pavements: 1 PDH

    In this course the student will understand the best practices for the design and construction of bases and subbases for concrete pavements as well as the effects on performance.Read More

    Webinar: Internal Curing for Concrete Pavements: 1 PDH

    In this course the student will understand the concepts and benefits of internal curing for concrete pavements including mixture design, quality control, and studies of practical applications over the past two decades.Read More

    Webinar: Roller Compact Concrete Pavements: 1 PDH

    This introductory course provides the engineer the basic understanding of the fundamentals of RCCP in design and construction. It presents an overview of the best practices for roller-compacted concrete pavement, its uses, its mixtures and construction.Read More

    Webinar: Fasteners: 1.5 PDH

    This course presents an in-depth look at steel fasteners with focus on structural fasteners, since they are a critical part of most steel structures. A broad range of topics will be discussed including fastener strength, selection criteria, available coatings and testing. This course will go beyond the standards and specifications and provide engineers with helpful background information and practical strategies to mitigate fastener issues and keep projects trouble free.Read More

    Webinar: Engineer's Guide to Green Building: 1 PDH

    In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of the attributes of green building methods and products and the design and developing considerations for all building & home systems.Read More

    Webinar: Engineer's Guide to Green Building-Part 2: 2 PDH

    In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of an in-depth examination of all green materials and methods for building green, and a comprehensive green building checklist to review before, during, and after any green build.Read More

    Webinar: Engineering Economic Analysis: 2 PDH

    This Course presents an overview of engineering economy analysis concepts. This course reviews the concepts of engineering economic analysis, including the time value of money, common analysis factors, discrete compounding and continuous compounding, taxes and depreciation, as well reviewing and applying various analysis methods. Numerous applications and problems will be set-up, solved and discussed.Read More

    Webinar: Introduction to Mechanical Components: 1.5 PDH

    Along with pumps and valves, reviewed in separate PDH courses, there are many other components that can be found in an industrial/power generation setting. Knowledge of these systems can be useful to any engineer. This online course provides a brief overview of air compressors, hydraulics, boilers, cooling towers, and other components likely to be installed in an industrial facility.Read More

    Webinar: Accessibility: 2010 ADA Guidelines – Accessible Routes: 1.5 PDH

    This course will focus on the Americans with Disabilities Act Accessibility Guidelines for Buildings and Facilities (the 2010 ADA Accessibility Design Guidelines): it will deep dive into chapter 4: Accessible Routes of the ADA guidelines covering in detail all regulations and requirements.Read More

    Webinar: OSHA Noise Hazards: 0.5 PDH

    This Course presents an overview of the hazards of workplace noise, especially evident in the construction industry; and steps to identity, mitigate, and control this hazard.Read More

    Package includes the following four self-administered distance education courses:

    Internal Curing for Concrete Pavements: 1 PDH

    In this course the student will understand the concepts and benefits of internal curing for concrete pavements including mixture design, quality control, and studies of practical applications over the past two decades.Read MorePreview Course

    Lessons Learned-Design and Construction of Buildings: 3 PDH

    In this course the student will review lessons learned from post building occupancy evaluations to understand common building design and/or construction flaws and review essential tips to correct, avoid and/or mitigate these occurrences.Read MorePreview Course

    Residential Structural Design: 5 PDH

    In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.Read MorePreview Course

    Sexual Harassment Prevention Training: 1 PDH

    In this course the student will understand what sexual harassment is, who it applies too, governing laws, and the methods for employers to address, correct , and prevent sexual harassment in the workplace.Read MorePreview Course

  • Sale!

    Wisconsin-Mechanical Engineering Package: 30 PDH

     $148.50 Add to cart
    This package satisfies all 30 required hours of professional development.

    1. 2 hours professional conduct and ethics, ref. Wisconsin Administrative Code A-E 13.03(1)(b)
    2. 13 hours of live interactive courses, ref. Wisconsin Administrative Code A-E 13.03(1)(c)
    3. 17 hours of distance education courses, ref. Wisconsin Administrative Code A-E 13.03(2)(b)
    Nine live interactive webinars and four distance learning courses guaranteed to be accepted by the Wisconsin Examining Board of Architects, Landscape Architects, Professional Engineers, Designers and Land SurveyorsInstructor: Raymond Bosek, PE
    Package includes the following ten live interactive courses:
    View Webinar Schedule

    Webinar: Design for Construction Safety: 1 PDH

    This course will provide engineers with information on how to recognize and anticipate construction hazards and how to eliminate them with well thought out design features. This course emphasizes permanent design features that eliminate or reduce the risk to hazards.Read More

    Webinar: Ethics for the Practicing Engineer: 1 PDH

    In this introductory ethics course the engineer will understand why we study ethics as engineering professionals, ethical theories to use in our ethical decision making, and some tools to identify and resolve ethical conflicts.Read More

    Webinar: Administering the Construction Project: 2.5 PDH

    In this course we will review the management and administrative procedures that practitioners will need to guide construction projects from the pre-construction phase to project close out successfully. The course will benefit professional engineers serving as project managers or field representatives by presenting techniques that can be applied to the construction project to enhance operations, improve scheduling, mitigate issues, and help minimize and resolve claims or disputes.Read More

    Webinar: Infrastructure Planning: 2 PDH

    This course presents the main concepts of infrastructure planning in the public sector including the environmental, social, and institutional assessments and discusses many planning methodologies and approaches. The purpose of this course is to provide practitioners involved in planning public infrastructure projects with guidelines to be considered and applied in the planning process.Read More

    Webinar: Introduction to Mechanical Components: 1.5 PDH

    Along with pumps and valves, reviewed in separate PDH courses, there are many other components that can be found in an industrial/power generation setting. Knowledge of these systems can be useful to any engineer. This online course provides a brief overview of air compressors, hydraulics, boilers, cooling towers, and other components likely to be installed in an industrial or power generation facility.Read More

    Webinar: Modern Heat Pumps: 1PDH

    In this course the engineer will be introduced to modern heat pumps and their applications. This introductory course will enable the students to understand the basics of the latest heat pump technologies and how to apply to multiple applications.Read More

    Webinar: Diesel Engine Fundamentals: 1.5 PDH

    This course provides the engineer the basic understanding of the operation and design of Diesel Engines. The student will learn in depth, the diesel engine operation including an overview of all basic components as well as the different cycles and the operation of all essential systems of modern day diesel engines.Read More

    Webinar: Storm Shelters & Safe Rooms: 1 PDH

    This course presents engineers with important information about the design and construction of community and residential safe rooms that will provide protection during tornado and hurricane events. The course will center around design guides FEMA P-320, P-361, and ICC 500.Read More

    Webinar: Fasteners: 1.5 PDH

    This course presents an in-depth look at steel fasteners with focus on structural fasteners, since they are a critical part of most steel structures. A broad range of topics will be discussed including fastener strength, selection criteria, available coatings and testing. This course will go beyond the standards and specifications and provide engineers with helpful background information and practical strategies to mitigate fastener issues and keep projects trouble free.Read More

    Package includes the following four distance education courses:

    Ethics for Professional Engineers – Case Reviews: 2 PDH

    In this course the student will study several ethical review cases conducted by the National Society of Professional Engineers (NSPE). This Ethics course is intended to fulfill the state’s ethics requirement.Read MorePreview Course

    Boiler Basics-Operation and Maintenance: 5 PDH

    In this course the student will understand steam generation, boilers and boiler components, and basic concepts in their operation and maintenance.Read MorePreview Course

    Improving Motor and Drive System Performance: 5 PDH

    This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.Read MorePreview Course

    Installation, Maintenance, and Repair of Water and Sewage Systems: 5 PDH

    In this course the student will understand a facility’s water and sewage systems and associated common components as well as basic concepts in installing, maintaining, repairing and the operation and maintenance of these systems.Read MorePreview Course

Scroll to Top