Civil Engineering

  • It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain gravel roadways routine maintenance and rehabilitation
      • Discuss drainage and its importance
      • Describe surface gravel types
      • Discuss dust control and stabilization
      • Recognize innovations and recent trends
      • Explain construction guidelines and gradation determination
      • Explain gravel road project quantity calculations
      • Discuss gravel deterioration and when to pave

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Gravel Road Construction: 4 PDH

    $24.00 Add to cart
    It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain gravel roadways routine maintenance and rehabilitation
      • Discuss drainage and its importance
      • Describe surface gravel types
      • Discuss dust control and stabilization
      • Recognize innovations and recent trends
      • Explain construction guidelines and gradation determination
      • Explain gravel road project quantity calculations
      • Discuss gravel deterioration and when to pave

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will review lessons learned from post building occupancy evaluations to understand common building design and/or construction flaws and review essential tips to correct, avoid and/or mitigate these occurrences.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain overall building design and construction best practices
      • Discuss general building site and landscape guidelines
      • Discuss envelope/structure essential tips
      • Understand architecture/interiors best practices
      • Describe mechanical/plumbing lessons learned
      • Explain lighting/electrical essentail tips
      • Explain operational fundamentals as relates to accessibility, durability, reliability, and maintainability/cleanability

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Lessons Learned-Design and Construction of Buildings: 3 PDH

    $18.00 Add to cart
    In this course the student will review lessons learned from post building occupancy evaluations to understand common building design and/or construction flaws and review essential tips to correct, avoid and/or mitigate these occurrences.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain overall building design and construction best practices
      • Discuss general building site and landscape guidelines
      • Discuss envelope/structure essential tips
      • Understand architecture/interiors best practices
      • Describe mechanical/plumbing lessons learned
      • Explain lighting/electrical essentail tips
      • Explain operational fundamentals as relates to accessibility, durability, reliability, and maintainability/cleanability

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand the theory and practice of remote sensing and image processing. Remote sensing is valuable tool for engineers and surveyors as it provides a cost-effective means of surveying, monitoring, and mapping objects at or near the surface of the Earth.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain remote sensing and its applications
      • Discuss the basic components of remote sensing
      • Discuss the history and future of remote sensing
      • Understand three-dimensional (3d) data acquisition
      • Describe elements of processing geospatial data
      • Explain image enhancements
      • Explain Digital Elevation Models (DEMs)

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Remote Sensing Essentials: 5 PDH

    $30.00 Add to cart
    In this course the student will understand the theory and practice of remote sensing and image processing. Remote sensing is valuable tool for engineers and surveyors as it provides a cost-effective means of surveying, monitoring, and mapping objects at or near the surface of the Earth.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain remote sensing and its applications
      • Discuss the basic components of remote sensing
      • Discuss the history and future of remote sensing
      • Understand three-dimensional (3d) data acquisition
      • Describe elements of processing geospatial data
      • Explain image enhancements
      • Explain Digital Elevation Models (DEMs)

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain American housing relative to its history, construction characteristics, regulation, and performance experience
      • Discuss structural sesign as it applies to residential buildings
      • Discuss the latest technical knowledge and engineering approaches for the design of homes
      • Explain design loads for residential buildings
      • Explain the various loads and load combinations
      • Review the various design approaches and corresponding calculations

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Residential Structural Design: 5 PDH

    $30.00 Add to cart
    In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain American housing relative to its history, construction characteristics, regulation, and performance experience
      • Discuss structural sesign as it applies to residential buildings
      • Discuss the latest technical knowledge and engineering approaches for the design of homes
      • Explain design loads for residential buildings
      • Explain the various loads and load combinations
      • Review the various design approaches and corresponding calculations

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand sustainability throughout the entire concrete pavement life cycle and the importance of recognizing context sensitivity and assessing trade-offs in developing sustainable solutions.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain selection, design, and production of asphalt materials for sustainability
      • Discuss sustainable strategies in asphalt pavement design and construction
      • Describe sustainable concepts on preservation/maintenance of asphalt pavements
      • Explain asphalt pavement end of life sustainable strategies

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Strategies for Improving Sustainability of Concrete Pavements: 3 PDH

    $18.00 Add to cart
    In this course the student will understand sustainability throughout the entire concrete pavement life cycle and the importance of recognizing context sensitivity and assessing trade-offs in developing sustainable solutions.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain selection, design, and production of asphalt materials for sustainability
      • Discuss sustainable strategies in asphalt pavement design and construction
      • Describe sustainable concepts on preservation/maintenance of asphalt pavements
      • Explain asphalt pavement end of life sustainable strategies

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand concrete pavement sustainability concepts and recommended practices for maximizing the sustainability of concrete pavements.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain sustainability and how it applies to concrete pavements
      • Discuss pavement sustainability concepts
      • Describe concrete pavement design attributes enhancing sustainability
      • Recite sustainable concrete pavement materials
      • Recognize construction issues related to sustainability
      • Identify concrete pavement renewal practices
      • Discuss economic and environmental analyses of sustainable concrete pavements

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Sustainable Concrete Pavements: 5 PDH

    $30.00 Add to cart
    In this course the student will understand concrete pavement sustainability concepts and recommended practices for maximizing the sustainability of concrete pavements.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain sustainability and how it applies to concrete pavements
      • Discuss pavement sustainability concepts
      • Describe concrete pavement design attributes enhancing sustainability
      • Recite sustainable concrete pavement materials
      • Recognize construction issues related to sustainability
      • Identify concrete pavement renewal practices
      • Discuss economic and environmental analyses of sustainable concrete pavements

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.
    Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain accidents and accident models
      • Discuss cause and effect relationships
      • Understand human performance considerations
      • Describe safety management systems
      • Recognize accident types/ individual and systems
      • Explain the design of accident investigations

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Accident and Operational Safety Analysis: 4 PDH

    $24.00 Add to cart
    In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.
    Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain accidents and accident models
      • Discuss cause and effect relationships
      • Understand human performance considerations
      • Describe safety management systems
      • Recognize accident types/ individual and systems
      • Explain the design of accident investigations

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Part 1 of a two part series, In this course the student will understand the strategic approach for improving performance to reduce human error and manage controls so as to reduce unwanted events and/or mitigate their impact should they occur. The student will learn methods and techniques for catching and reducing errors and locating and eliminating latent organizational weaknesses.
    Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain human performance and its principles
      • Discuss the anatomy of a human triggered event
      • Understand strategic approach for human performance
      • Describe human fallibility and common traits of human nature
      • Discuss performance modes of human performance
      • Recognize error-likely situations

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Engineering Human Performance Optimization in the Workplace Part 1: 4 PDH

    $24.00 Add to cart
    Part 1 of a two part series, In this course the student will understand the strategic approach for improving performance to reduce human error and manage controls so as to reduce unwanted events and/or mitigate their impact should they occur. The student will learn methods and techniques for catching and reducing errors and locating and eliminating latent organizational weaknesses.
    Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain human performance and its principles
      • Discuss the anatomy of a human triggered event
      • Understand strategic approach for human performance
      • Describe human fallibility and common traits of human nature
      • Discuss performance modes of human performance
      • Recognize error-likely situations

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • In this course the student will understand roadway approach embankment design and construction and methods to mitigate deformations typically seen in these structure, including the infamous “bump” encountered at the approach to structure interface.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain typical approach roadway deformation problems
    • Discuss internal and external deformation
    • Understand computation of immediate and consolidation settlements
    • Explain deformation design solutions
    • Understand construction monitoring and quality assurance

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Approach Roadway Deformations: 4 PDH

    $24.00 Add to cart
    In this course the student will understand roadway approach embankment design and construction and methods to mitigate deformations typically seen in these structure, including the infamous “bump” encountered at the approach to structure interface.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain typical approach roadway deformation problems
    • Discuss internal and external deformation
    • Understand computation of immediate and consolidation settlements
    • Explain deformation design solutions
    • Understand construction monitoring and quality assurance

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand the engineering characteristics of soils and rocks and to how to properly identify and classify to develop a subsurface profile for site evaluations.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    1. Discuss soil descriptions and standards
    2. Explain soil classification and properties
    3. Discuss practical aspects of fine-grained and course-grained soils
    4. Explain rock descriptions and classifications (SPT)
    5. Understand subsurface profile development

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Engineering Description of Soils and Rocks: 4 PDH

    $24.00 Add to cart
    In this course the student will understand the engineering characteristics of soils and rocks and to how to properly identify and classify to develop a subsurface profile for site evaluations.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    1. Discuss soil descriptions and standards
    2. Explain soil classification and properties
    3. Discuss practical aspects of fine-grained and course-grained soils
    4. Explain rock descriptions and classifications (SPT)
    5. Understand subsurface profile development

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand the essentials of subsurface explorations for roadways with a comprehensive overview including site preparation, sampling methods, types of testing and methods, as well as standard guidelines and recommendations.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss preparing for subsurface explorations
    • Explain field reconnaissance and setting-up a exploration program
    • Discuss sampling techniques and tools
    • Explain various tests in addition to the standard penetration test (SPT)
    • Understand guidelines for minimum exploration

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Geotechnical Subsurface Exploration for Roadways: 5 PDH

    $30.00 Add to cart
    In this course the student will understand the essentials of subsurface explorations for roadways with a comprehensive overview including site preparation, sampling methods, types of testing and methods, as well as standard guidelines and recommendations.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss preparing for subsurface explorations
    • Explain field reconnaissance and setting-up a exploration program
    • Discuss sampling techniques and tools
    • Explain various tests in addition to the standard penetration test (SPT)
    • Understand guidelines for minimum exploration

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand the intricate details of laboratory testing of subsurface soils and rocks in order to obtain values of their engineering properties necessary for design.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain common laboratory test methods
    • Discuss laboratory testing equipment for soil and rock samples
    • Discuss testing procedures
    • Explain measured parameters
    • Understand common guidelines for testing soils and rocks

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Laboratory Testing for Geotechnical Design and Construction: 5 PDH

    $30.00 Add to cart
    In this course the student will understand the intricate details of laboratory testing of subsurface soils and rocks in order to obtain values of their engineering properties necessary for design.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain common laboratory test methods
    • Discuss laboratory testing equipment for soil and rock samples
    • Discuss testing procedures
    • Explain measured parameters
    • Understand common guidelines for testing soils and rocks

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand the design of slope stability in embankments and structures and how to recognize, analyze, and solve slope instability issues encountered.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain the effects of water on slope stability
    • Discuss Factor of Safety in Design
    • Understand how to solve slope instability problems
    • Explain methods and tools to solve slope instability issues
    • Understand methods to improve stability

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Slope Stability in Embankments and Structures: 5 PDH

    $30.00 Add to cart
    In this course the student will understand the design of slope stability in embankments and structures and how to recognize, analyze, and solve slope instability issues encountered.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain the effects of water on slope stability
    • Discuss Factor of Safety in Design
    • Understand how to solve slope instability problems
    • Explain methods and tools to solve slope instability issues
    • Understand methods to improve stability

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand sustainability throughout the entire pavement life cycle and the importance of recognizing context sensitivity and assessing trade-offs in developing sustainable solutions.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain selection, design, and production of asphalt materials for sustainability
    • Discuss sustainable strategies in asphalt pavement design and construction
    • Understand sustainable concepts on preservation/maintenance of asphalt pavements
    • Explain asphalt pavement end of life sustainable strategies

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Strategies for Improving Sustainability of Asphalt Pavements: 3 PDH

    $18.00 Add to cart
    In this course the student will understand sustainability throughout the entire pavement life cycle and the importance of recognizing context sensitivity and assessing trade-offs in developing sustainable solutions.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain selection, design, and production of asphalt materials for sustainability
    • Discuss sustainable strategies in asphalt pavement design and construction
    • Understand sustainable concepts on preservation/maintenance of asphalt pavements
    • Explain asphalt pavement end of life sustainable strategies

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand the properties and mechanics of soils and accurately calculate the stresses and deformations of soil masses.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand weight-volume relationships
    • Discuss vertical and lateral stress distributions
    • Discuss load deformation processes
    • Explain strength of soils
    • Understand calculating stress and strain

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Stress and Strain in Soils: 4 PDH

    $24.00 Add to cart
    In this course the student will understand the properties and mechanics of soils and accurately calculate the stresses and deformations of soil masses.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand weight-volume relationships
    • Discuss vertical and lateral stress distributions
    • Discuss load deformation processes
    • Explain strength of soils
    • Understand calculating stress and strain

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Part one of a two-part course, this course provides a thorough overview of the systems engineering process and presents a in-depth review of the tools and processes to to develop a system efficiently and effectively and to support that system through its life cycle. Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain systems engineering management
    • Understand the systems engineering process
    • Discuss requirement and functional analysis and allocation
    • Discuss systems engineering and the verification process
    • Explain the outputs of the systems engineering process
    • Understand work breakdown structure and configuration management

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Systems Engineering Fundamentals Part 1: 5 PDH

    $30.00 Add to cart
    Part one of a two-part course, this course provides a thorough overview of the systems engineering process and presents a in-depth review of the tools and processes to to develop a system efficiently and effectively and to support that system through its life cycle. Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain systems engineering management
    • Understand the systems engineering process
    • Discuss requirement and functional analysis and allocation
    • Discuss systems engineering and the verification process
    • Explain the outputs of the systems engineering process
    • Understand work breakdown structure and configuration management

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Part two of a two-part course, this course provides a thorough overview of the systems engineering process and presents a in-depth review of the tools and processes to to develop a system efficiently and effectively and to support that system through its life cycle. Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand technical reviews and their roles in systems development
    • Discuss applications of trade studies, modeling & simulation, and metrics
    • Explain risk management and standards tools and concepts
    • Discuss systems engineering planning
    • Discuss product improvement strategies
    • Explain organizing and integrating systems development
    • Understand contractual and management considerations

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Systems Engineering Fundamentals Part 2: 5 PDH

    $30.00 Add to cart
    Part two of a two-part course, this course provides a thorough overview of the systems engineering process and presents a in-depth review of the tools and processes to to develop a system efficiently and effectively and to support that system through its life cycle. Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand technical reviews and their roles in systems development
    • Discuss applications of trade studies, modeling & simulation, and metrics
    • Explain risk management and standards tools and concepts
    • Discuss systems engineering planning
    • Discuss product improvement strategies
    • Explain organizing and integrating systems development
    • Understand contractual and management considerations

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • ADA Standards for Accessible Designs: 6 PDH
    The Americans with Disabilities Act (ADA) is a federal civil rights law intended to protect qualified persons with disabilities from discrimination in employment, government services and programs, transportation, public accommodations, and telecommunications. The ADA covers a wide range of legal and regulatory issues with regard to Americans with disabilities. This course will focus on the Americans with Disabilities Act Accessibility Guidelines for Buildings and Facilities (the ADA Accessibility Design Guidelines), with which engineers and architects need to comply when working on new constructions or alterations of existing structures.
    Instructor: Raymond Bosek, PE

    The Americans with Disabilities Act (ADA) is a federal civil rights law intended to protect qualified persons with disabilities from discrimination in employment, government services and programs, transportation, public accommodations, and telecommunications. The ADA covers a wide range of legal and regulatory issues with regard to Americans with disabilities. This course will focus on the Americans with Disabilities Act Accessibility Guidelines for Buildings and Facilities (the ADA Accessibility Design Guidelines), with which engineers and architects need to comply when working on new constructions or alterations of existing structures.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • ADA Accessibility Design Guidelines
    • General instructions and definitions
    • Technical specifications and requirements on elements and spaces
    • Specific requirements for restaurants
    • Specific requirements for cafeterias
    • Specific requirements for medical facilities
    • Specific requirements for business facilities
    • Specific requirements for lodging facilities
    • Specific requirements for libraries
    • Specific requirements for transportation facilities
    • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    ADA Standards for Accessible Designs: 6 PDH

    $36.00 Add to cart
    The Americans with Disabilities Act (ADA) is a federal civil rights law intended to protect qualified persons with disabilities from discrimination in employment, government services and programs, transportation, public accommodations, and telecommunications. The ADA covers a wide range of legal and regulatory issues with regard to Americans with disabilities. This course will focus on the Americans with Disabilities Act Accessibility Guidelines for Buildings and Facilities (the ADA Accessibility Design Guidelines), with which engineers and architects need to comply when working on new constructions or alterations of existing structures.
    Instructor: Raymond Bosek, PE

    The Americans with Disabilities Act (ADA) is a federal civil rights law intended to protect qualified persons with disabilities from discrimination in employment, government services and programs, transportation, public accommodations, and telecommunications. The ADA covers a wide range of legal and regulatory issues with regard to Americans with disabilities. This course will focus on the Americans with Disabilities Act Accessibility Guidelines for Buildings and Facilities (the ADA Accessibility Design Guidelines), with which engineers and architects need to comply when working on new constructions or alterations of existing structures.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • ADA Accessibility Design Guidelines
    • General instructions and definitions
    • Technical specifications and requirements on elements and spaces
    • Specific requirements for restaurants
    • Specific requirements for cafeterias
    • Specific requirements for medical facilities
    • Specific requirements for business facilities
    • Specific requirements for lodging facilities
    • Specific requirements for libraries
    • Specific requirements for transportation facilities
    • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • In this course the student will examine the management and administrative procedures that practitioners will need to guide construction projects from the pre-construction phase to project close out successfully. The course will benefit professional engineers serving as project managers or field representatives by presenting techniques that can be applied to the construction project to enhance operations, improve scheduling, mitigate issues, and help minimize and resolve claims or disputes.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Describe the different types of project delivery systems
      • Discuss the various responsibilities of each project member
      • Discuss necessary documentation and construction laws
      • Explain the bidding process and contract award
      • Describe planning, scheduling, and operations
      • Discuss changes and handling claims and disputes
      • Explain project closeouts

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a five question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 2.5 professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the On-demand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
    You may print or save your certificate or access anytime within your account.

    Administering the Construction Project : 2.5 PDH (On-Demand Webinar)

    $30.00 Add to cart
    In this course the student will examine the management and administrative procedures that practitioners will need to guide construction projects from the pre-construction phase to project close out successfully. The course will benefit professional engineers serving as project managers or field representatives by presenting techniques that can be applied to the construction project to enhance operations, improve scheduling, mitigate issues, and help minimize and resolve claims or disputes.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Describe the different types of project delivery systems
      • Discuss the various responsibilities of each project member
      • Discuss necessary documentation and construction laws
      • Explain the bidding process and contract award
      • Describe planning, scheduling, and operations
      • Discuss changes and handling claims and disputes
      • Explain project closeouts

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a five question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 2.5 professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the On-demand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
    You may print or save your certificate or access anytime within your account.

  • In this course the student will examine the management and administrative procedures that practitioners will need to guide construction projects from the pre-construction phase to project close out successfully. The course will benefit professional engineers serving as project managers or field representatives by presenting techniques that can be applied to the construction project to enhance operations, improve scheduling, mitigate issues, and help minimize and resolve claims or disputes.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Describe the different types of project delivery systems
      • Discuss the various responsibilities of each project member
      • Discuss necessary documentation and construction laws
      • Explain the bidding process and contract award
      • Describe planning, scheduling, and operations
      • Discuss changes and handling claims and disputes
      • Explain project closeouts

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a five question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 2.5 professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the On-demand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
    You may print or save your certificate or access anytime within your account.

    Administering the Construction Project : 2.5 PDH (On-Demand Webinar)

    $30.00 Add to cart
    In this course the student will examine the management and administrative procedures that practitioners will need to guide construction projects from the pre-construction phase to project close out successfully. The course will benefit professional engineers serving as project managers or field representatives by presenting techniques that can be applied to the construction project to enhance operations, improve scheduling, mitigate issues, and help minimize and resolve claims or disputes.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Describe the different types of project delivery systems
      • Discuss the various responsibilities of each project member
      • Discuss necessary documentation and construction laws
      • Explain the bidding process and contract award
      • Describe planning, scheduling, and operations
      • Discuss changes and handling claims and disputes
      • Explain project closeouts

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a five question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 2.5 professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the On-demand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
    You may print or save your certificate or access anytime within your account.

State Approvals

All of our online courses comply with the Continuing Professional Competency Guidelines published by the National Council of Examiners for Engineering and Surveying (NCEES) and the International Association for Continuing Education & Training (IACEP), therefore, shall be acceptable to all the state boards requiring mandatory continuing education.
EZ-pdh.com approved provider map of USA for professional engineersKey
Approved Providers Mandatory

This column lists states which require continuing education (CE) be completed with a state approved provider. We are approved in all of the seven states requiring pre-approval. “Click to Verify” button will transfer you to the State Board website listing approved providers. We are listed under Ezekiel Enterprises, LLC or EZpdh.com with POC: Raymond Bosek

Florida:
Approved Provider Number:0006346
(listed as Ezekiel Enterprises, LLC)Click to VerifyArchitecture and Interior Design Approved Provider Number:PVD433(listed as Ezekiel Enterprises, LLC)
Click to Verify
Indiana:
CE Approved Provider CE21800049(listed as Ezekiel Enterprises, LLC)
Click to Verify
Louisiana:
CPD Approved Provider CPD.0000317(listed as Ezekiel Enterprises, LLC)
Click to VerifyMaryland:
Approved Provider(listed as EZpdh.com)
Click to VerifyNew Jersey:
Approved CPC Provider 24GP00009900(listed as EZpdh.com)
Click to VerifyNew York:
NYSED Approved Sponsor #166(listed as Ezekiel Enterprises, LLC)
Click to VerifyNorth Carolina:
Approved Sponsor Number:S-0650(listed as Ezekiel Enterprises, LLC)
Click to Verify

Not Mandatory

This column lists states which DO NOT require continuing education (CE) to be completed with a state approved provider. States transfer responsibility to engineer to determine if the CE is acceptable and the state reserves the right to disallow hours if they determined hours are unacceptable. We recommend to complete CE with only state pre-approved providers

Alabama
Alaska
Arkansas
Delaware
Georgia
Idaho
Illinois
Iowa
Kansas
Kentucky
Maine
Maryland
Michigan
Minnesota
Mississippi
Missouri
Montana
Nebraska
Nevada
New Hampshire
New Mexico
North Dakota
Ohio
Oklahoma
Oregon
Pennsylvania
South Carolina
South Dakota
Tennessee
Texas
Utah
Vermont
Virginia
West Virginia
Wisconsin
Wyoming

Read More about State ApprovalsAre you a Land Surveyor? – Click Here for State Approvals

Scroll to Top