Showing 81–100 of 114 results

  • Improving Energy Efficiency in Historic Buildings: 2 PDH

     $12.00 Add to cart
    In this course the student will learn the general concept of the most efficient methods to enhance energy efficiency of historic buildings, while limiting the damage done during the rehabilitation process.
    Instructor: Raymond Bosek, PE
    In this course the student will learn the general concept of the most efficient methods to enhance energy efficiency of historic buildings, while limiting the damage done during the rehabilitation process.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Inherent energy efficient features of historic buildings
    • Concept of conducting an energy audit
    • Actions to improve energy efficiency
    • Dealing with moisture
    • Applicable alternative energy sources

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Improving Fan System Performance: 4 PDH

     $24.00 Add to cart
    In this online course a student will understand fan systems, their components and operation, and various methods and guidelines to improve the performance for new or existing systems.
    Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand the basics industrial fan systems and components
    • Identify fan selection and efficiency
    • Discuss basic maintenance and common problems
    • Explain configurations to improve fan efficiency
    • Understand fan control and arrangements
    • Explain fan economics and calculations used

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) continuing education hours (CEH)/professional development hours (PDH) of continuing education.

    Preview Course
    Click” Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Improving Motor and Drive System Performance: 5 PDH

     $30.00 Add to cart
    This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Understand motor and drive systems and their components
      • Discuss various industrial uses for motor and drive systems
      • Explain tools and methods to analyze systems
      • Discuss performance enhancements at the system level
      • Discuss performance enhancements at the component level
      • Understand the economics of the system and systems management approaches

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

  • Innovative Building Technology: 5 PDH

     $30.00 Add to cart
    In this course the student will understand the design process of building and constructing modern innovative buildings using new technology products and methods to increase building efficiency, durability, and sustainability. Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the four decision phases for any project
    • Understand the economics of implementing new technologies into the design and construction
    • Discuss cost/benefits into the decision making process
    • Explain feasibility by performance and economics
    • Discuss performance measures through design and construction
    • Understand building efficiency, durability, and sustainability
    • Become familiar with the evaluation tools and resources available during design and construction

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Installation, Maintenance, and Repair of Water and Sewage Systems: 5 PDH

     $30.00 Add to cart
    In this course the student will understand a facility’s water and sewage systems and associated common components as well as basic concepts in installing, maintaining, repairing and the operation and maintenance of these systems.Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Discuss the different types of plumbing fixtures commonly found
      • Explain the operation of common plumbing fixtures
      • Describe the procedures associated with plumbing repairs
      • Explain the procedures for locating pipe leakage
      • Describe installation and repair of common water and sewage components
      • Describe maintenance and repair of common water and sewage components
      • Explain procedures associated with sewer maintenance and repair

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

  • Internal Curing for Concrete Pavements: 1 PDH

     $6.00 Add to cart
    In this course the student will understand the concepts and benefits of internal curing for concrete pavements including mixture design, quality control, and studies of practical applications over the past two decades.
    Instructor: Raymond Bosek, PE
    In this course the student will understand the concepts and benefits of internal curing for concrete pavements including mixture design, quality control, and studies of practical applications over the past two decades.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Internally cured concrete pavement applications
    • Mixture design
    • Construction aspects
    • Properties of internally cured concrete
    • Practical applications

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one (1) professional development hour (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Laboratory Testing for Geotechnical Design and Construction: 5 PDH

     $30.00 Add to cart
    In this course the student will understand the intricate details of laboratory testing of subsurface soils and rocks in order to obtain values of their engineering properties necessary for design.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain common laboratory test methods
    • Discuss laboratory testing equipment for soil and rock samples
    • Discuss testing procedures
    • Explain measured parameters
    • Understand common guidelines for testing soils and rocks

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

  • Lessons Learned-Design and Construction of Buildings: 3 PDH

     $18.00 Add to cart
    In this course the student will review lessons learned from post building occupancy evaluations to understand common building design and/or construction flaws and review essential tips to correct, avoid and/or mitigate these occurrences.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain overall building design and construction best practices
      • Discuss general building site and landscape guidelines
      • Discuss envelope/structure essential tips
      • Understand architecture/interiors best practices
      • Describe mechanical/plumbing lessons learned
      • Explain lighting/electrical essentail tips
      • Explain operational fundamentals as relates to accessibility, durability, reliability, and maintainability/cleanability

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

  • Mechanical Systems Commissioning: 6 PDH

     $36.00 Add to cart
    In this course the student will learn the various benefits commissioned mechanical equipment has to a facility by understanding the procedures in developing a commissioning program for mechanical equipment and the detailed processes effective in verifying proper system installation.Instructor: Seth, Grablow PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the need for commissioning mechanical equipment
    • Understand the commissioning process
    • Explain commissioning of HVAC equipment
    • Explain commissioning of Generators And Ancillary Equipment
    • Explain commissioning of Air Compressors And Pneumatic Control Systems
    • Explain commissioning of Fire Suppression Systems
    • Explain commissioning of Cranes And Elevators
    • Explain commissioning of Water And Sewage Treatment Systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies six professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Pavement Design for Roads, Streets, Walks, and Open Storage Areas: 6 PDH

    Pavement Design for Roads, Streets, Walks, and Open Storage Areas: 6 PDH

     $36.00 Add to cart
    This online course provides guidance for design of pavements and supporting materials for roads, streets, walks and open storage areas. The contents include procedures for conducting preliminary site reconnaissance, traffic analyses, and criteria for the design of subgrade, subbase, base courses, flexible and rigid pavements.
    Instructor: Raymond Bosek, PE

    This online course provides guidance for design of pavements and supporting materials for roads, streets, walks and open storage areas. The contents include procedures for conducting preliminary site reconnaissance, traffic analyses, and criteria for the design of subgrade, subbase, base courses, flexible and rigid pavements.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Preliminary Soil Investigations
    • Vehicular Traffic Considerations
    • Flexible Pavement Materials & Subgrades
    • Bituminous Pavement
    • Flexible Pavement Design
    • Rigid Pavement Design
    • Concrete Pavement Design
    • Reinforced Concrete Pavements
    • Pavement Overlays
    • Joints For Plain & Reinforced Concrete
    • Roller-Compacted Concrete Pavements
    • Seasonal Frost Conditions

      • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Ponds- Planning, Design, Construction: 2 PDH

     $12.00 Add to cart
    This course provides guidance on some of the required criteria the United States Department of Agriculture (USDA) has in place for the planning, design, construction and maintenance of ponds. This course describes basic design principles of embankment and excavation ponds as well as construction requirements. This online PDH course is intended for hydrologists, civil engineers, agricultural engineers, construction engineers, municipal engineers, geotechnical engineers and environmental engineers.
    Instructor: Raymond Bosek, PE

    This course provides guidance on some of the required criteria the United States Department of Agriculture (USDA) has in place for the planning, design, construction and maintenance of ponds. This course describes basic design principles of embankment and excavation ponds as well as construction requirements. Topics include: water needs, preliminary soil investigations, watershed & stormwater runoff estimation, basin sealing, spillways and inlets, and operation & maintenance. This online PDH course is intended for hydrologists, civil engineers, agricultural engineers, construction engineers, municipal engineers, geotechnical engineers and environmental engineers.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Become familiar with the general features and the differences of embankment and excavated ponds
    • How to perform a preliminary investigation
    • Be able estimate storm water runoff quantity and rate using the runoff curve number method
    • Estimate time of concentration for a watershed for a given flow length and average watershed slope
    • Advantages and disadvantages of a hooded or canopy inlet spillway and a drop inlet spillway
    • Estimate earthfill requirements for an embankment for known end areas and embankment length
    • Estimate embankment end area for known embankment height, side slopes, and top width

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 16 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • SIPS-PDH-course

    Prescriptive Method for Structural Insulated Panels (SIPs) in Construction: 3 PDH

     $18.00 Add to cart
    In this course the student will learn prescriptive requirements to facilitate the use of Structural Insulated Panels (SIPs) in wall systems for the construction of one- and two-family dwellings. Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain SIP materials, shapes, & standard sizes
    • Understand prescriptive provisions for wall thickness selection
    • Discuss Above grade wall requirements
    • Discuss SIP header & connection details
    • Explain construction details to design and construct residential wall systems using SIPs

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Principles of Hydraulic and Pneumatic Systems: 4 PDH

     $24.00 Add to cart
    In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems. Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain the operating principles of hydraulic systems
      • Discuss operation characteristics and component functions
      • Discuss maintenance procedures of a hydraulic system
      • Describe the operating principles of pneumatic systems
      • Identifying operational characteristics and service procedures applicable to pneumatic systems

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

  • Process Design for Conversion of Biomass to Biofuels: 4 PDH

     $24.00 Add to cart
    In this course you the student will understand the motivation, process, design, and cost of converting biomass into biofuel. The focus of this course is to find a plausible pathway to convert algal carbohydrates and lipids to fuel and to minimize cost during production.
    Instructor: Raymond Bosek, PE
    In this course you the student will understand the motivation, process, design, and cost of converting biomass into biofuel. The focus of this course is to find a plausible pathway to convert algal carbohydrates and lipids to fuel and to minimize cost during production.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Why the motivation to exploit this energy supply
    • Process design and cost estimation
    • Economics and processing cost factors
    • Analysis of processing research on case study
    • Future research and opportunities

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Pumped Storage Hydropower and Conduit Hydropower: 1 PDH

     $6.00 Add to cart
    In this online course a student will learn about the different ways pumped storage hydropower and conduit hydropower can enhance renewable energy portfolio's, the steps necessary to develop this new technology, and the common barriers encountered for deployment.
    Instructor: Seth Grablow, PE

    In this online course a student will learn about the different ways pumped storage hydropower and conduit hydropower can enhance renewable energy portfolio's, the steps necessary to develop this new technology, and the common barriers encountered for deployment.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understanding of pumped storage hydropower
    • Understanding of potential hydropower from conduits
    • Addresses the technical flexibility that existing pumped storage facilities can provide to support intermittent renewable energy generation
    • Describing grid reliability benefits
    • Understanding the differences between Pumped storage hydropower and conduit hydropower
    • Safety aspects of constructing conduit hydropower projects on existing water-conveyance structures
    • Current status and the future outlook for PSH in the United States

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (1) continuing education hour (CEH)/professional development hour (PDH) of continuing education.

    Preview Course
    Click” Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Remote Sensing Essentials: 5 PDH

     $30.00 Add to cart
    In this course the student will understand the theory and practice of remote sensing and image processing. Remote sensing is valuable tool for engineers and surveyors as it provides a cost-effective means of surveying, monitoring, and mapping objects at or near the surface of the Earth.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain remote sensing and its applications
      • Discuss the basic components of remote sensing
      • Discuss the history and future of remote sensing
      • Understand three-dimensional (3d) data acquisition
      • Describe elements of processing geospatial data
      • Explain image enhancements
      • Explain Digital Elevation Models (DEMs)

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

  • Residential Structural Design: 5 PDH

     $30.00 Add to cart
    In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain American housing relative to its history, construction characteristics, regulation, and performance experience
      • Discuss structural sesign as it applies to residential buildings
      • Discuss the latest technical knowledge and engineering approaches for the design of homes
      • Explain design loads for residential buildings
      • Explain the various loads and load combinations
      • Review the various design approaches and corresponding calculations

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • PDH Course picture of rock excavations blasting design part 1

    Rock Excavations Blasting Design Part 1: 6 PDH

     $36.00 Add to cart
    In this course the student will understand the fundamentals of blasting for rock excavations by learning the art and design of using explosives for the removal of rock and similar materials for construction activities. This is part 1 of a 2 part series.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss the history of explosives in construction
    • Identify basic blasting terminology
    • Explain the different types of explosives
    • Determine optimal explosives for use cases
    • Discuss the various types of initiation systems
    • Discuss common geology encountered and blast design characteristics
    • Explain site exploration activities and common hazards

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Roller Compacted Concrete Pavements: 1 PDH

     $6.00 Add to cart
    In this course the student will understand RCC pavement, RCC mixtures and construction of RCC pavements.
    Instructor: Raymond Bosek, PE
    In this course the student will understand RCC pavement, RCC mixtures and construction of RCC pavements.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Materials Used For RCC Pavements
    • Construction Consideration
    • Paving Operations

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one (1) professional development hour (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Roundabouts Part 1: 3 PDH

     $18.00 Add to cart
    This is part I of a three-part series, this is the first course covering the first 2 chapters of Roundabouts: An Informational Guide from the Federal Highway Administration. This course gives you an introduction to the features and benefits of the many different types of roundabouts. It also covers the safety, cost and policy concerns related to building roundabouts.
    Instructor: Raymond Bosek, PE

    This is part I of a three-part series, this is the first course covering the first 2 chapters of Roundabouts: An Informational Guide from the Federal Highway Administration. This course gives you an introduction to the features and benefits of the many different types of roundabouts. It also covers the safety, cost and policy concerns related to building roundabouts.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understanding of the development of the roundabouts
    • Reviewing the types of roundabouts
    • Describing roundabout design features
    • Understanding the differences between roundabouts and traffic circles
    • Safety aspects of roundabouts
    • Multimodal considerations of roundabouts

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) continuing education hour (CEH)/professional development hour (PDH) of continuing education.

    Preview Course
    Click” Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
Shopping Cart
Scroll to Top