Transportation Engineering

  • It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain gravel roadways routine maintenance and rehabilitation
      • Discuss drainage and its importance
      • Describe surface gravel types
      • Discuss dust control and stabilization
      • Recognize innovations and recent trends
      • Explain construction guidelines and gradation determination
      • Explain gravel road project quantity calculations
      • Discuss gravel deterioration and when to pave

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Gravel Road Construction: 4 PDH

    $24.00 Add to cart
    It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain gravel roadways routine maintenance and rehabilitation
      • Discuss drainage and its importance
      • Describe surface gravel types
      • Discuss dust control and stabilization
      • Recognize innovations and recent trends
      • Explain construction guidelines and gradation determination
      • Explain gravel road project quantity calculations
      • Discuss gravel deterioration and when to pave

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand sustainability throughout the entire concrete pavement life cycle and the importance of recognizing context sensitivity and assessing trade-offs in developing sustainable solutions.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain selection, design, and production of asphalt materials for sustainability
      • Discuss sustainable strategies in asphalt pavement design and construction
      • Describe sustainable concepts on preservation/maintenance of asphalt pavements
      • Explain asphalt pavement end of life sustainable strategies

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Strategies for Improving Sustainability of Concrete Pavements: 3 PDH

    $18.00 Add to cart
    In this course the student will understand sustainability throughout the entire concrete pavement life cycle and the importance of recognizing context sensitivity and assessing trade-offs in developing sustainable solutions.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain selection, design, and production of asphalt materials for sustainability
      • Discuss sustainable strategies in asphalt pavement design and construction
      • Describe sustainable concepts on preservation/maintenance of asphalt pavements
      • Explain asphalt pavement end of life sustainable strategies

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand concrete pavement sustainability concepts and recommended practices for maximizing the sustainability of concrete pavements.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain sustainability and how it applies to concrete pavements
      • Discuss pavement sustainability concepts
      • Describe concrete pavement design attributes enhancing sustainability
      • Recite sustainable concrete pavement materials
      • Recognize construction issues related to sustainability
      • Identify concrete pavement renewal practices
      • Discuss economic and environmental analyses of sustainable concrete pavements

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Sustainable Concrete Pavements: 5 PDH

    $30.00 Add to cart
    In this course the student will understand concrete pavement sustainability concepts and recommended practices for maximizing the sustainability of concrete pavements.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain sustainability and how it applies to concrete pavements
      • Discuss pavement sustainability concepts
      • Describe concrete pavement design attributes enhancing sustainability
      • Recite sustainable concrete pavement materials
      • Recognize construction issues related to sustainability
      • Identify concrete pavement renewal practices
      • Discuss economic and environmental analyses of sustainable concrete pavements

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • This courses addresses the fundamental question of how much plug-in electric vehicle (PEV) charging infrastructure is needed in the United States to support both plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs). In this course the student will understand PEV charging infrastructure requirements and analyze a range of plausible scenarios that consider the relationship between the evolution of the PEV fleet and charging infrastructure.Instructor: Juan Pesante, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand residential and non-residential electric vehicle charging requirements
    • Discuss existing vehicle and infrastructure status
    • Understand different scenarios of growth
    • Explain direct current fast charging growth for corridor charging
    • Discuss overall infrastructure changes required for models and estimates

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Analysis of National Charging infrastructure for Electric Vehicles: 3 PDH

    $18.00 Add to cart
    This courses addresses the fundamental question of how much plug-in electric vehicle (PEV) charging infrastructure is needed in the United States to support both plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs). In this course the student will understand PEV charging infrastructure requirements and analyze a range of plausible scenarios that consider the relationship between the evolution of the PEV fleet and charging infrastructure.Instructor: Juan Pesante, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand residential and non-residential electric vehicle charging requirements
    • Discuss existing vehicle and infrastructure status
    • Understand different scenarios of growth
    • Explain direct current fast charging growth for corridor charging
    • Discuss overall infrastructure changes required for models and estimates

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand roadway approach embankment design and construction and methods to mitigate deformations typically seen in these structure, including the infamous “bump” encountered at the approach to structure interface.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain typical approach roadway deformation problems
    • Discuss internal and external deformation
    • Understand computation of immediate and consolidation settlements
    • Explain deformation design solutions
    • Understand construction monitoring and quality assurance

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Approach Roadway Deformations: 4 PDH

    $24.00 Add to cart
    In this course the student will understand roadway approach embankment design and construction and methods to mitigate deformations typically seen in these structure, including the infamous “bump” encountered at the approach to structure interface.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain typical approach roadway deformation problems
    • Discuss internal and external deformation
    • Understand computation of immediate and consolidation settlements
    • Explain deformation design solutions
    • Understand construction monitoring and quality assurance

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand the engineering characteristics of soils and rocks and to how to properly identify and classify to develop a subsurface profile for site evaluations.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    1. Discuss soil descriptions and standards
    2. Explain soil classification and properties
    3. Discuss practical aspects of fine-grained and course-grained soils
    4. Explain rock descriptions and classifications (SPT)
    5. Understand subsurface profile development

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Engineering Description of Soils and Rocks: 4 PDH

    $24.00 Add to cart
    In this course the student will understand the engineering characteristics of soils and rocks and to how to properly identify and classify to develop a subsurface profile for site evaluations.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    1. Discuss soil descriptions and standards
    2. Explain soil classification and properties
    3. Discuss practical aspects of fine-grained and course-grained soils
    4. Explain rock descriptions and classifications (SPT)
    5. Understand subsurface profile development

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand the essentials of subsurface explorations for roadways with a comprehensive overview including site preparation, sampling methods, types of testing and methods, as well as standard guidelines and recommendations.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss preparing for subsurface explorations
    • Explain field reconnaissance and setting-up a exploration program
    • Discuss sampling techniques and tools
    • Explain various tests in addition to the standard penetration test (SPT)
    • Understand guidelines for minimum exploration

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Geotechnical Subsurface Exploration for Roadways: 5 PDH

    $30.00 Add to cart
    In this course the student will understand the essentials of subsurface explorations for roadways with a comprehensive overview including site preparation, sampling methods, types of testing and methods, as well as standard guidelines and recommendations.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Discuss preparing for subsurface explorations
    • Explain field reconnaissance and setting-up a exploration program
    • Discuss sampling techniques and tools
    • Explain various tests in addition to the standard penetration test (SPT)
    • Understand guidelines for minimum exploration

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand the intricate details of laboratory testing of subsurface soils and rocks in order to obtain values of their engineering properties necessary for design.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain common laboratory test methods
    • Discuss laboratory testing equipment for soil and rock samples
    • Discuss testing procedures
    • Explain measured parameters
    • Understand common guidelines for testing soils and rocks

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Laboratory Testing for Geotechnical Design and Construction: 5 PDH

    $30.00 Add to cart
    In this course the student will understand the intricate details of laboratory testing of subsurface soils and rocks in order to obtain values of their engineering properties necessary for design.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain common laboratory test methods
    • Discuss laboratory testing equipment for soil and rock samples
    • Discuss testing procedures
    • Explain measured parameters
    • Understand common guidelines for testing soils and rocks

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand the design of slope stability in embankments and structures and how to recognize, analyze, and solve slope instability issues encountered.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain the effects of water on slope stability
    • Discuss Factor of Safety in Design
    • Understand how to solve slope instability problems
    • Explain methods and tools to solve slope instability issues
    • Understand methods to improve stability

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Slope Stability in Embankments and Structures: 5 PDH

    $30.00 Add to cart
    In this course the student will understand the design of slope stability in embankments and structures and how to recognize, analyze, and solve slope instability issues encountered.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain the effects of water on slope stability
    • Discuss Factor of Safety in Design
    • Understand how to solve slope instability problems
    • Explain methods and tools to solve slope instability issues
    • Understand methods to improve stability

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand sustainability throughout the entire pavement life cycle and the importance of recognizing context sensitivity and assessing trade-offs in developing sustainable solutions.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain selection, design, and production of asphalt materials for sustainability
    • Discuss sustainable strategies in asphalt pavement design and construction
    • Understand sustainable concepts on preservation/maintenance of asphalt pavements
    • Explain asphalt pavement end of life sustainable strategies

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Strategies for Improving Sustainability of Asphalt Pavements: 3 PDH

    $18.00 Add to cart
    In this course the student will understand sustainability throughout the entire pavement life cycle and the importance of recognizing context sensitivity and assessing trade-offs in developing sustainable solutions.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain selection, design, and production of asphalt materials for sustainability
    • Discuss sustainable strategies in asphalt pavement design and construction
    • Understand sustainable concepts on preservation/maintenance of asphalt pavements
    • Explain asphalt pavement end of life sustainable strategies

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand the properties and mechanics of soils and accurately calculate the stresses and deformations of soil masses.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand weight-volume relationships
    • Discuss vertical and lateral stress distributions
    • Discuss load deformation processes
    • Explain strength of soils
    • Understand calculating stress and strain

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

    Stress and Strain in Soils: 4 PDH

    $24.00 Add to cart
    In this course the student will understand the properties and mechanics of soils and accurately calculate the stresses and deformations of soil masses.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand weight-volume relationships
    • Discuss vertical and lateral stress distributions
    • Discuss load deformation processes
    • Explain strength of soils
    • Understand calculating stress and strain

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • In this course the student will understand the best practices for the design and construction of bases and subbases for concrete pavements as well as the effects on performance.
    Instructor: Raymond Bosek, PE
    In this course the student will understand the concepts and benefits of internal curing for concrete pavements including mixture design, quality control, and studies of practical applications over the past two decades.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Rigid Pavement Layer Configuration
    • Design of Base/Subbase For Rigid Pavements
    • Materials For Base and Subbase
    • Construction and Subbase
    • Cost Considerations

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one (1) professional development hour (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Bases and Subbases for Concrete Pavements: 1 PDH

    $6.00 Add to cart
    In this course the student will understand the best practices for the design and construction of bases and subbases for concrete pavements as well as the effects on performance.
    Instructor: Raymond Bosek, PE
    In this course the student will understand the concepts and benefits of internal curing for concrete pavements including mixture design, quality control, and studies of practical applications over the past two decades.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Rigid Pavement Layer Configuration
    • Design of Base/Subbase For Rigid Pavements
    • Materials For Base and Subbase
    • Construction and Subbase
    • Cost Considerations

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one (1) professional development hour (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • In this course the student will understand the best practices for the design and construction of bases and subbases for concrete pavements as well as the effects on performance.Instructor: Raymond Bosek, PE
    In this course the student will understand the best practices for the design and construction of bases and subbases for concrete pavements as well as the effects on performance.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Describe the best practices for design & construction of bases & subbases
      • Discuss the early use and history of bases & subbases
      • Understand the pavement layer configuration
      • Explain design considerations for bases and subbases
      • Discuss design of bases/subbases layers for rigid pavements
      • Describe the materials utilized for bases & subbases
      • Understand the construction of bases/subbases layers
      • Explain cost considerations
      • Discuss European practices of design and construction with bases & subbases for rigid pavements

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the Ondemand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
    You may print or save your certificate or access anytime within your account.

    Bases and Subbases for Concrete Pavements: 1 PDH (On-Demand Webinar)

    $10.00 Add to cart
    In this course the student will understand the best practices for the design and construction of bases and subbases for concrete pavements as well as the effects on performance.Instructor: Raymond Bosek, PE
    In this course the student will understand the best practices for the design and construction of bases and subbases for concrete pavements as well as the effects on performance.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Describe the best practices for design & construction of bases & subbases
      • Discuss the early use and history of bases & subbases
      • Understand the pavement layer configuration
      • Explain design considerations for bases and subbases
      • Discuss design of bases/subbases layers for rigid pavements
      • Describe the materials utilized for bases & subbases
      • Understand the construction of bases/subbases layers
      • Explain cost considerations
      • Discuss European practices of design and construction with bases & subbases for rigid pavements

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the Ondemand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
    You may print or save your certificate or access anytime within your account.

  • In this course the student will understand the distresses caused to concrete by chemical deicers and methods used to minimize this distress.Instructor: Raymond Bosek, PE

    In this course the student will understand the distresses caused to concrete by chemical deicers and methods used to minimize this distress.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understanding of the use of chemical anti-icers and deicers
    • Discuss how hydraulic cement paste (HCP) is traditionally protected from freeze-thaw damage
    • Describe physical and chemical distress mechanisms
    • Discuss strategies that can be employed to mitigate this distress

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one professional development hour (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Chemical Deicers & Concrete Pavement: Impacts & Mitigation: 1 PDH

    $6.00 Add to cart
    In this course the student will understand the distresses caused to concrete by chemical deicers and methods used to minimize this distress.Instructor: Raymond Bosek, PE

    In this course the student will understand the distresses caused to concrete by chemical deicers and methods used to minimize this distress.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understanding of the use of chemical anti-icers and deicers
    • Discuss how hydraulic cement paste (HCP) is traditionally protected from freeze-thaw damage
    • Describe physical and chemical distress mechanisms
    • Discuss strategies that can be employed to mitigate this distress

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one professional development hour (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • In this course the student will understand design options & methods for various steel bridge deck types such as concrete deck slabs, metal grid decks, orthotropic steel decks, wood decks, and several others. Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain analysis and design methods of concrete decks
    • Understand the different types of precast deck slabs and placement sequence
    • Describe formwork and methods
    • Describe metal grid decks and design considerations
    • Understand design & construction methods of metal grid decks
    • Describe orthotropic steel decks and design considerations
    • Understand design & construction methods of orthotropic steel decks
    • Explain wood decks and the various types
    • Describe other types of deck systems and design consideration

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 21 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Deck Design for Steel Bridges: 4 PDH

    $24.00 Add to cart
    In this course the student will understand design options & methods for various steel bridge deck types such as concrete deck slabs, metal grid decks, orthotropic steel decks, wood decks, and several others. Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain analysis and design methods of concrete decks
    • Understand the different types of precast deck slabs and placement sequence
    • Describe formwork and methods
    • Describe metal grid decks and design considerations
    • Understand design & construction methods of metal grid decks
    • Describe orthotropic steel decks and design considerations
    • Understand design & construction methods of orthotropic steel decks
    • Explain wood decks and the various types
    • Describe other types of deck systems and design consideration

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 21 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • In this course the student will come to understand a general overview of the planning process of a road tunnel project, geometrical requirements and recommendations of new road tunnels, investigative techniques and parameters required for planning, construction and design of road tunnels, and the different types of reports required for a road tunnel project.
    Instructor: Raymond Bosek, PE
    In this course the student will come to understand a general overview of the planning process of a road tunnel project, geometrical requirements and recommendations of new road tunnels, investigative techniques and parameters required for planning, construction and design of road tunnels, and the different types of reports required for a road tunnel project.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • General tunnel design parameters
    • Alternative analyses
    • Tunnel studies
    • Operation and financial planning
    • Geometric configurations
    • Geotechnical investigations
    • Geotechnical Reports

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Design and Construction of Road Tunnels-Part 1 Planning: 5 PDH

    $30.00 Add to cart
    In this course the student will come to understand a general overview of the planning process of a road tunnel project, geometrical requirements and recommendations of new road tunnels, investigative techniques and parameters required for planning, construction and design of road tunnels, and the different types of reports required for a road tunnel project.
    Instructor: Raymond Bosek, PE
    In this course the student will come to understand a general overview of the planning process of a road tunnel project, geometrical requirements and recommendations of new road tunnels, investigative techniques and parameters required for planning, construction and design of road tunnels, and the different types of reports required for a road tunnel project.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • General tunnel design parameters
    • Alternative analyses
    • Tunnel studies
    • Operation and financial planning
    • Geometric configurations
    • Geotechnical investigations
    • Geotechnical Reports

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • In this course the student will understand the construction methodology and excavation support systems for cut-and-cover road tunnels, design and construction issues for rock and soft ground tunneling, and the special approaches that must be made when passing through difficult ground.
    Instructor: Raymond Bosek, PE
    In this course the student will understand the construction methodology and excavation support systems for cut-and-cover road tunnels, design and construction issues for rock and soft ground tunneling, and the special approaches that must be made when passing through difficult ground.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Cut and cover tunnels
    • Rock Tunneling
    • Softground tunneling
    • Difficult ground tunneling
    • Structural design and subsystems
    • Groundwater control
    • Tunnel support design
    • Permanent lining design
    • Soil stabilization
    • Instability and heaving loads

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Design and Construction of Road Tunnels-Part 2 Methodology and Excavation Support: 5 PDH

    $30.00 Add to cart
    In this course the student will understand the construction methodology and excavation support systems for cut-and-cover road tunnels, design and construction issues for rock and soft ground tunneling, and the special approaches that must be made when passing through difficult ground.
    Instructor: Raymond Bosek, PE
    In this course the student will understand the construction methodology and excavation support systems for cut-and-cover road tunnels, design and construction issues for rock and soft ground tunneling, and the special approaches that must be made when passing through difficult ground.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Cut and cover tunnels
    • Rock Tunneling
    • Softground tunneling
    • Difficult ground tunneling
    • Structural design and subsystems
    • Groundwater control
    • Tunnel support design
    • Permanent lining design
    • Soil stabilization
    • Instability and heaving loads

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • In this course the student will understand the concepts of the sequential excavation method as well as the design, purpose and construction of tunnel linings, immersed tunnels, and jacked box tunnels.
    Instructor: Raymond Bosek, PE
    In this course the student will understand the concepts of the sequential excavation method as well as the design, purpose and construction of tunnel linings, immersed tunnels, and jacked box tunnels

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Sequential excavation method
    • Tunnel lining
    • Immersed tunnels
    • Jacked box tunneling
    • Ground classsification
    • Instrumentation and monitoring
    • Construction methodolgies
    • Ground control and watertightness

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Design and Construction of Road Tunnels-Part 3 Design and Detailing: 5 PDH

    $30.00 Add to cart
    In this course the student will understand the concepts of the sequential excavation method as well as the design, purpose and construction of tunnel linings, immersed tunnels, and jacked box tunnels.
    Instructor: Raymond Bosek, PE
    In this course the student will understand the concepts of the sequential excavation method as well as the design, purpose and construction of tunnel linings, immersed tunnels, and jacked box tunnels

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Sequential excavation method
    • Tunnel lining
    • Immersed tunnels
    • Jacked box tunneling
    • Ground classsification
    • Instrumentation and monitoring
    • Construction methodolgies
    • Ground control and watertightness

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • In this course the student will understand the reasons and methods to consider regarding seismic activity in the design process. The concepts of mined/bored tunnel construction engineering. Also, how to monitor the performance of the tunnel construction process, and how to identify, characterize and repair tunnels.
    Instructor: Raymond Bosek, PE
    In this course the student will understand the reasons and methods to consider regarding seismic activity in the design process. The concepts of mined/bored tunnel construction engineering. Also, how to monitor the performance of the tunnel construction process, and how to identify, characterize and repair tunnels.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Seismis considerations and evaluation
    • Tunnel construction engineering
    • Staging and sequencing
    • Instrumentation
    • Gorund movements and groundwater behavior
    • Tunnel Rehabilation
    • Structural and lining repairs

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Design and Construction of Road Tunnels-Part 4 Obstacles and Mitigations: 5 PDH

    $30.00 Add to cart
    In this course the student will understand the reasons and methods to consider regarding seismic activity in the design process. The concepts of mined/bored tunnel construction engineering. Also, how to monitor the performance of the tunnel construction process, and how to identify, characterize and repair tunnels.
    Instructor: Raymond Bosek, PE
    In this course the student will understand the reasons and methods to consider regarding seismic activity in the design process. The concepts of mined/bored tunnel construction engineering. Also, how to monitor the performance of the tunnel construction process, and how to identify, characterize and repair tunnels.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Seismis considerations and evaluation
    • Tunnel construction engineering
    • Staging and sequencing
    • Instrumentation
    • Gorund movements and groundwater behavior
    • Tunnel Rehabilation
    • Structural and lining repairs

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • This course enables the student to understand, evaluate, and determine which type of pavement distress is taking place on roadways and paved surfaces. The student will learn how to identify different types of pavement distresses and , severity levels, means to measure the distresses and methods to document.
    Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Identifying distresses in different surfaces
    • Understanding and identifying the severity levels
    • How to measure the distresses
    • Methods to document /li>

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

    Distressed Pavements Identification: 3 PDH

    $18.00 Add to cart
    This course enables the student to understand, evaluate, and determine which type of pavement distress is taking place on roadways and paved surfaces. The student will learn how to identify different types of pavement distresses and , severity levels, means to measure the distresses and methods to document.
    Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Identifying distresses in different surfaces
    • Understanding and identifying the severity levels
    • How to measure the distresses
    • Methods to document /li>

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

State Approvals

All of our online courses comply with the Continuing Professional Competency Guidelines published by the National Council of Examiners for Engineering and Surveying (NCEES) and the International Association for Continuing Education & Training (IACEP), therefore, shall be acceptable to all the state boards requiring mandatory continuing education.
EZ-pdh.com approved provider map of USA for professional engineersKey
Approved Providers Mandatory

This column lists states which require continuing education (CE) be completed with a state approved provider. We are approved in all of the seven states requiring pre-approval. “Click to Verify” button will transfer you to the State Board website listing approved providers. We are listed under Ezekiel Enterprises, LLC or EZpdh.com with POC: Raymond Bosek

Florida:
Approved Provider Number:0006346
(listed as Ezekiel Enterprises, LLC)Click to VerifyArchitecture and Interior Design Approved Provider Number:PVD433(listed as Ezekiel Enterprises, LLC)
Click to Verify
Indiana:
CE Approved Provider CE21800049(listed as Ezekiel Enterprises, LLC)
Click to Verify
Louisiana:
CPD Approved Provider CPD.0000317(listed as Ezekiel Enterprises, LLC)
Click to VerifyMaryland:
Approved Provider(listed as EZpdh.com)
Click to VerifyNew Jersey:
Approved CPC Provider 24GP00009900(listed as EZpdh.com)
Click to VerifyNew York:
NYSED Approved Sponsor #166(listed as Ezekiel Enterprises, LLC)
Click to VerifyNorth Carolina:
Approved Sponsor Number:S-0650(listed as Ezekiel Enterprises, LLC)
Click to Verify

Not Mandatory

This column lists states which DO NOT require continuing education (CE) to be completed with a state approved provider. States transfer responsibility to engineer to determine if the CE is acceptable and the state reserves the right to disallow hours if they determined hours are unacceptable. We recommend to complete CE with only state pre-approved providers

Alabama
Alaska
Arkansas
Delaware
Georgia
Idaho
Illinois
Iowa
Kansas
Kentucky
Maine
Maryland
Michigan
Minnesota
Mississippi
Missouri
Montana
Nebraska
Nevada
New Hampshire
New Mexico
North Dakota
Ohio
Oklahoma
Oregon
Pennsylvania
South Carolina
South Dakota
Tennessee
Texas
Utah
Vermont
Virginia
West Virginia
Wisconsin
Wyoming

Read More about State ApprovalsAre you a Land Surveyor? – Click Here for State Approvals

Scroll to Top