Gravel Road Construction: 4 PDH

Gravel Road Construction: 4 PDH

$24.00

It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.Instructor: Raymond Bosek, PE

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

    • Explain gravel roadways routine maintenance and rehabilitation
    • Discuss drainage and its importance
    • Describe surface gravel types
    • Discuss dust control and stabilization
    • Recognize innovations and recent trends
    • Explain construction guidelines and gradation determination
    • Explain gravel road project quantity calculations
    • Discuss gravel deterioration and when to pave

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

Preview Course
Click “Preview Course” to view prior to purchase
Click “Add to Cart” to purchase
SKU: CV1515-25 Categories: ,

Related Courses

  • Design and Construction of Road Tunnels-Part 2 Methodology and Excavation Support: 5 PDH

     $30.00 Add to cart
    In this course the student will understand the construction methodology and excavation support systems for cut-and-cover road tunnels, design and construction issues for rock and soft ground tunneling, and the special approaches that must be made when passing through difficult ground.
    Instructor: Raymond Bosek, PE
    In this course the student will understand the construction methodology and excavation support systems for cut-and-cover road tunnels, design and construction issues for rock and soft ground tunneling, and the special approaches that must be made when passing through difficult ground.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Cut and cover tunnels
    • Rock Tunneling
    • Softground tunneling
    • Difficult ground tunneling
    • Structural design and subsystems
    • Groundwater control
    • Tunnel support design
    • Permanent lining design
    • Soil stabilization
    • Instability and heaving loads

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Roundabouts Part 3: 5 PDH

     $30.00 Add to cart

    This is part III of a three-part series. The third course covering the final chapters 6, 7, & 8 of Roundabouts: An Informational Guide from the Federal Highway Administration. In this course the student will learn the many different ways to design a roundabout and what steps are taken to ensure the most efficient and safe roundabout for a given location. Also covered are the signage requirements, landscaping potential, and multi-roundabout systems that can be used when designing a roundabout.
    Instructor: Raymond Bosek, PE

    This is part III of a three-part series. The third course covering the final chapters 6, 7, & 8 of Roundabouts: An Informational Guide from the Federal Highway Administration. In this course the student will learn the many different ways to design a roundabout and what steps are taken to ensure the most efficient and safe roundabout for a given location. Also covered are the signage requirements, landscaping potential, and multi-roundabout systems that can be used when designing a roundabout.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Design principles
    • Geometric elements
    • Double-Lane, rural, and mini-roundabouts
    • Traffic design
    • Signage, markings, and illumination
    • Other design considerations
    • Crash prediction models

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) continuing education hour (CEH)/professional development hour (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

Shopping Cart
Scroll to Top